[Q] micromax a27 bricked need help!!!!!! - General Questions and Answers

i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help

Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
Download The stock rom from this link https://drive.google.com/uc?id=0B6-h6iUVgfhJMW8yejZybFlfMXc
And put it in your sd card...
Go to recovery mode and flash this zip file from there...
And don't forget to press thanks if I helped...

but the device is not turning onn so how to go recovery mode

Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download The stock rom from this link
And put it in your sd card...
Go to recovery mode and flash this zip file from there...
And don't forget to press thanks if I helped...
Click to expand...
Click to collapse
but how to access recovery mode if device is not turning onn

Akshay kapoor said:
i just tried to install dreamboltx on my micromax a27 and it just got bricked that means when i turn it on it just shows up a black screen and vibrates plz help me.......the only thing i can access is fastboot mode plz help
Click to expand...
Click to collapse
Check out this link
http://forum.xda-developers.com/showthread.php?t=2520719
Scroll down to micomax a27 title
Sent from my LG-E610 using xda app-developers app

atulkris said:
Check out this link
http://forum.xda-developers.com/showthread.php?t=2520719
Scroll down to micomax a27 title
Sent from my LG-E610 using xda app-developers app
Click to expand...
Click to collapse
I think you should give it to svc if you are in warranty...

This is simple bro. Just download the stock rom from above link & unzip it, you will find system.img file copy it to your computer's fastboot folder & boot your phone to fastboot & give this command in command prompt "fastboot flash system system.img" and press enter. Then your phone will be ok. If any problem feel free to reply @ my email [email protected].
Sent from my Micromax A27 using xda app-developers app

Akshay kapoor said:
but how to access recovery mode if device is not turning onn
Click to expand...
Click to collapse
flash stock backup via SP flash tool

Hello...
were you able to resolve this?
I m also stuck on this after I messed up my phone OS while playing with it.
---------- Post added at 11:52 AM ---------- Previous post was at 11:42 AM ----------
Can we somehow extract the img's from the .pac file and then use fastboot?
The phone is going into fastboot mode only and doesnt respond to this flashing tool at all.
Please suggest.

I cn help u...i tried to instal dreamvolt in my a27 nd its bricked.nobody give me right solution for it. So i tried myself nd find the solution.
First extract dreamvolt zip nd copy boot.img file into fastboot folder nd goto fastboot mod
Type cmnt " fastboot flash boot boot.img .after losding this file ur phone turn on nd off after showing main page of ur phone then restarts.dnt panic nw ur phone cn flash through sp upgrade tool
Open sp upgrade tool nd load the ".pac" file then goto backup option inthe tool and untic all.nw press ok and press the play butten.reimsert ur phones battery and press vol down , connect usb cable .nw u cn see flashing starts on pc.wait to complete the process.good luck.if its helpful to u pls mail me [email protected]

Related

No bootloader, no recovery, but the phone is working perfectly

Hello guys,
My A110 Canvas 2 is rooted and superuser is present on my phone. But there is no recovery in it. And I'm also unable to boot into bootloader. Flashing recovery through mobile uncle tools is also not working. In order to flash CWM recovery, I need to boot into bootloader, but I'm unable to do it. When I run the command fastboot reboot-bootloader, the phone just restarts and doesn't enter bootloader. Help needed urgently.
issue
blinkash said:
Hello guys,
My A110 Canvas 2 is rooted and superuser is present on my phone. But there is no recovery in it. And I'm also unable to boot into bootloader. Flashing recovery through mobile uncle tools is also not working. In order to flash CWM recovery, I need to boot into bootloader, but I'm unable to do it. When I run the command fastboot reboot-bootloader, the phone just restarts and doesn't enter bootloader. Help needed urgently.
Click to expand...
Click to collapse
Download ROM manager...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
Pranesh Desai said:
Download ROM manager...
Click on flash clockwork mod recovery
Then u will see message on screen. "
recovery for a110 is not available"
Click option... select Micromax a70 from the
list
Download and flash ..recovery
of Micromax a70
Go to Mobile uncle tools, select recovery
update, select ur cwm file(recovery.img),
flash it.. voila
Click to expand...
Click to collapse
Great buddy,
Your solution worked. Thanks a lot. I'll also press the Thanks button.
Selected recovery update then this image is comes wats the next step
Sent from my Micromax A110 using xda premium
cwm
dude first put the cwm image in the SD card then open mobile tools and select recovery update and the select from SD card. now it showing recovery file in remote. so when u will put file it will show SD card
ur phone must be rooted

[Q] cant able to enter recovery

i try to install clockworkmod recovery using mobileuncle tools
bt after that i reboot into recovery mood
bt now everytime i try to enter in recovery mood
it's showing white screen nd restart my mobile
i have backup file in .backup format
bt can't also able to restore that
need urgent help
my mobile walton primo c2
android 4.2.2
kernel 3.4.5
ruhul0 said:
i try to install clockworkmod recovery using mobileuncle tools
bt after that i reboot into recovery mood
bt now everytime i try to enter in recovery mood
it's showing white screen nd restart my mobile
i have backup file in .backup format
bt can't also able to restore that
need urgent help
my mobile walton primo c2
android 4.2.2
kernel 3.4.5
Click to expand...
Click to collapse
is ur mobile turning on??0r its been bootlooped?
siva aggzz said:
is ur mobile turning on??0r its been bootlooped?
Click to expand...
Click to collapse
yes its turning on
bt can't able to access is recovery to restore .backup file
ruhul0 said:
yes its turning on
bt can't able to access is recovery to restore .backup file
Click to expand...
Click to collapse
Try to reflash your recovery , It could be that the flashing has failed..
Fantassy123 said:
Try to reflash your recovery , It could be that the flashing has failed..
Click to expand...
Click to collapse
how to do that?
i try temporary recovery mood
bt it jst show usb transferring
nd than it doesn't show recovery
I too have issues I need help with. I have spent the last two days reading this forum with little joy, wish a Mod would approve my account so I can get into the right section and post my findings.
ruhul0 said:
how to do that?
i try temporary recovery mood
bt it jst show usb transferring
nd than it doesn't show recovery
Click to expand...
Click to collapse
Bro ... Flash the recovery using sp tools or uncletools... It will solve your problem...
Hit thanks rather posting thanks
SENT FROM MY LAVA IRIS 455 using xda developers app
siva aggzz said:
Bro ... Flash the recovery using sp tools or uncletools... It will solve your problem...
Hit thanks rather posting thanks
SENT FROM MY LAVA IRIS 455 using xda developers app
Click to expand...
Click to collapse
in sp tools cant able to get Scatter
nd i use mobileuncle tools to recover bt it also failed
i want to get cwm recovery
siva aggzz said:
Bro ... Flash the recovery using sp tools or uncletools... It will solve your problem...
Hit thanks rather posting thanks
SENT FROM MY LAVA IRIS 455 using xda developers app
Click to expand...
Click to collapse
i try temporary recovery
in that its showing
usb transfering...
4kb/s anmission ok time:424ms vel:2034
Try changing cables bro... Cz 4kb/s is really somethng very bad issue wth the cable and also try swtchng to dffrnt port ...may b it can hlp yu
SENT FROM MY LAVA IRIS 455 using xda developers app
terminal emulator
ruhul0 said:
i try to install clockworkmod recovery using mobileuncle tools
bt after that i reboot into recovery mood
bt now everytime i try to enter in recovery mood
it's showing white screen nd restart my mobile
i have backup file in .backup format
bt can't also able to restore that
need urgent help
my mobile walton primo c2
android 4.2.2
kernel 3.4.5
Click to expand...
Click to collapse
Do you have terminal emulator installed on phone? if you dont have it, download and install it.
Launch terminal emulator app then type this..
su (then press enter)
reboot recovery (then press enter)
it should put your phone on recovery.

[Q] Guys Please help me......

I just tried to do a factory reset from the settings application but my phone went into a bootloop. It keeps on rebooting into CWM. I tried to flash the srock 4.1.1 through spflash tool but my phone goes into a boot loop immediately. I tried to flash it with batteries taken out but my phone was repeatedly connected and disconnected from my PC. I can't even charge my phone. I was using "SLT-Nexus-TSUNAMI™ TechVanced™ By SuperDroid-BOND™".... Guys someone please help me.....:crying::crying::crying::crying::crying:
If U r not able To flash Via Spflash too
you flash stock roms via Spflash tool Or From Recovery
press Thx If This Helped You Need More Help
Sent from my A110 using Tapatalk
SMARTY BOY said:
If U r not able To flash Via Spflash too
you flash stock roms via Spflash tool Or From Recovery
press Thx If This Helped You Need More Help
Sent from my A110 using Tapatalk
Click to expand...
Click to collapse
I cant boot my phone even into the recovery mode that's my problem.

I am unable to go in recovery mode.

I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Gyandeepg44 said:
I had tried to use Mobileuncle tool for custom recovery with the help philz img but after doing this now I am unable to go in recovery mode, when I m trying to go it's rebooting again n again, but able to enter in factory mode, plz help(for rooting the phone I am using Kingroot):crying:
(Using lollipop 5.0)
Plz help guys....
Click to expand...
Click to collapse
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
adeelraj said:
try to flash stock kitkat or lollipop rom sp flash tool
Sent from my Nexus 7
Click to expand...
Click to collapse
Actually I am not aware that how to flash so can you plz step by step.
this link has complete step by step guide
a bit lenghthy but works 100%
http://forums.androidcentral.com/go...1477-guide-nexus-7-factory-image-restore.html
Sent from my N901C using Tapatalk 2
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Same problem is occurring, guys plz help.....
Rustamveer said:
guys I have micromax unite2 a106 phone. I also tryd to flash philz in it by mobile uncle tools with the help of a thread on xda.
But now when I reboot into recovery, it only shows logo for sometimes and then blank screen.
I think that philz rec was made fir its kitkat version but now it is lollipop updated.
But my recovery is lost.
How to bring it back.....???????? Without pc it will be better.
Click to expand...
Click to collapse
flash stock rom via sp flashtool then install recovery again
Gyandeepg44 said:
Same problem is occurring, guys plz help.....
Click to expand...
Click to collapse
Sent from my N901C using Tapatalk 2
Micromachining A106
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me

can't get into recovery mode in mmx A106

Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist.
To best assist you with your issue, I'm going to move this thread to your device's Q&A section.
You should receive expert advice there.
Good luck!
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Okay so you are unable to boot your device in recovery mode. You can download stock recovery or any custom recovery for your device and then again flash it using flashify. Hope it will work. If its not working let me know by replying. :good:
Flashify is unable to flash stock n custom recovery in my mmx a106. I tried it but i got same issue as amlesh
Whats you need to do is to install sp flash tool on your pc and the stock rom for your mmx unite 2 lollipop .then install sp flash tool and and execute the program ...then there will be a command 'Scatter file' ....click on that and open that in fhe Firmware folder of your Stock Rom ....the connect ur device using usb cable and then click download in the sp flash tool......after completing that disconnect ur devices and reboot it....
Wrong Choice!
Flashify and Twrp are both bad for Unite 2!
You would have flashed the Philz Recovery with SP FLash tool and then flashed the TWRP recovery using it!
Now Still you can do the same
Just google philz recovery and you will get a detailed answer there!
If you like this hit THANKS
i_Amlesh said:
Hello guys..okay so i hav mmx a106 phone...in which i tried flashing twrp recovery using flashify.
But when i boot into recovery there was micromax logo for some seconds nd den it rebooted...
Now everytym wen i boot into recovery jst mmx logo appears nd den it reboots...
Nw d prblm is hw to get into recovery mode..or hw can i go my factory recovery mode instead of any custom recovery. Its being a biy problamatic so guyss plzz help me
Click to expand...
Click to collapse
Your phone appears to have gone into a bootloop.
Here is what you can do as you can't get into the system and reboot into recovery mode. Just confirm if you are doing it the correct way.
To enter Recovery mode - turn phone completely OFF.
Recovery = Vol Down + Power (hold both down for several seconds)
This button press procedure varies with each device/model of phone.
Click to expand...
Click to collapse
If the above steps failed, proceed down below.
Things you will need:
1) USB to PC connecting cable
2) A PC where you can download one of the tools to recover (MTKDroid/SpFlash along with the device specific Scatter file)
3) USB drivers installed on your PC to connect with your phone
4) Patience to read references and follow the steps to flash recovery using Tool
CAUTION: Do steps at your own risk. Do not hesitate to ask if not sure. Post restoring recovery successfully, if you plan to flash a Custom ROM, suggest taking a backup from device using TWRP OR atleast the NVRAM using MTKDroid Tool so that you do not run into issues resulting with SIM showing No Network/Service.
Click to expand...
Click to collapse
References: (Some of the community folks have done the hard work to publish these)
SP FLASH TOOL Tutorial to install TWRP / Custom Recovery
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
Installing custom recovery using SP Flash Tool(COMPLETE TUTORIAL)
https://forum.xda-developers.com/k3-note/general/sp-flash-tool-tutorial-to-install-twrp-t3346041
[How to/MTK65xx] ROOT, Backup & Flash (MTKDroidTools, Spflashtool, CWM) [MTK Only]
https://forum.xda-developers.com/showthread.php?t=2730031
[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore
https://forum.xda-developers.com/elephone-p9000/how-to/how-to-guideline-install-mtk-drivers-t3344042
Ensure to have the latest versions of TWRP and the flash tools MTKDroid AND/OR SPFlash.
To let you know, I've used the recoveries viz. CTR, TWRP, CWM, Philz on MMX a106 and haven't experienced any issues at all. Neither have I had any issues with Flashify as reported by some. Anyways its a personal experience
NOTE: If the issue is already resolved by now, please help others know it with your fix.
Click to expand...
Click to collapse
Hope this helps, happy restoring
Finally, Thank if you feel helped.

Categories

Resources