Hi
I bought a Samsung Galaxy Tab 2 7.0 in Thailand last year. Unfortunately for a while now it's been stuck at the boot screen. I've tried hard resetting (Power on, volume up or down) and nothing appears. The tablet just switches on again. I'm beginning to think I should just give up, as i've tried everything i've heard of. I haven't loaded any new software or anything on it. I can't also try upgrading the software via kies or odin as nothing is detected when I plug the tablet in via USB. It charges normally, the light goes on and the charging animation pops up.
Can somebody PLEASE help?
Also, it doesn't get stuck on a blue Samsung screen. It gets stuck on a green Android screen.
Related
Hi,
Two days ago I got the official update of jelly beam 4.3 to my Samsung galaxy s3. Today morning I switched on the phone its worked fine. But after 2 hours suddenly my phone was restarted and Samsung Logo Splash Screen (Samsung galaxy S3 GT-I9300T) and Keeps rebooting. So I remove the battery and insert it after a few second. After that the phone worked fine and again the same problem happened.
If I remove the battery, phone switch off. And if I insert the battery, phone switch on itself and keep restarting.
I try to open the (Home + Volume Up+ power ON) button option. But is not working. If I plug the phone to charge, gray battery shows and again restarting to charge…. (I mean, phone won’t stay in a stage).
So can you please let me know it’s a software problem or hardware problem?
If it’s a software how fix it ? ( I tried the emergency firmware recovery through kies, but kies couldn’t fine my phone)
Hi,
Two days ago I got the official update of jelly bean 4.3 to my Samsung galaxy s3.Last night phone was dropped with in small height. Today morning I switched on the phone its worked fine. But at the evening suddenly my phone was restarted and Samsung Logo Splash Screen (Samsung galaxy S3 GT-I9300T) and Keeps rebooting. So I remove the battery and insert it after a few second. After that the phone worked fine and again the same problem happened.
if I remove the battery, phone switch off. And if I insert the battery again, phone switch on itself (without press power button) and keep restarting.
I try to open the (Home + Volume Up+ power ON) button option. But is not working. If I plug the phone to charge, gray battery shows and again restarting to charge…. (I mean, phone won’t stay in a stage).
If i try (HOme + voulme down + power On) option, phone shows the download mode for 5 seconds and restart again.
So can you please let me know it’s a software problem or hardware problem?
If it’s a software how fix it ? ( I tried the emergency firmware recovery through kies, but kies couldn’t fine my phone).
Thank You.
Hello,
I have a problem with my samsung galaxy s7 edge. When I try to put it on the samsung logo appears for a second or two and then I see a black screen again, there is also written 'Kernel is not seandroid enforcing' in red letters in the left corner of the screen. Nothing seems to help, I don't know a lot of these android things, but I have been looking on the internet and i have tried a lot of things. First of all I've tried a hard reset (press and hold the power, volume up and home buttons), when I do this, I get the same screen as I put it on, but now there is 'Recovery is not seandroid enforcing' in the left corner instead of 'Kelner'.
Then, when I press and hold the power, volume down and home buttons and I click continue, my phone comes in download mode. I've seen a video about about a factory reset out of download mode so I thought there was still hope. The only problem is that I cannot connect my phone with my PC neither. My PC can't recognize my phone. I've tried to use different USB cables, I've installed USB Drivers on my PC, but nothing seems to help. I've tried to use ODIN, Smart Switch and Samsung kies, but they can't find my S7 Edge. There is also an option where you can enter the buildnumber and SN thing (idk) of your phone and I've tried that to. The only thing that happens is my phone who begins to charge and a sound on my PC that says that he is connected to a device, but he can't see him.
I really don't know what I have to do now, does somebody has a solution to fix this problem?
Thanks in advance.
Marcin Jedrych
S7 Edge forums
https://forum.xda-developers.com/s7-edge
My s8+ suddenly stopped working and kept on getting stuck on the logo. I tried installing the firmware through odin and it said pass. The phone turned on and showed the logo and said installing...it did that for 2-3 times and it is now suddely turned off and shows just black screen. I cannot go to recovery mode or download mode, I cannot see a charging logo. The phone just shows black screen and is totally unresponsive even if i tried charging through its charger or connected it to the computer
Hi everyone,
My phone got updated to UI 3.1, after the restart it has gone into boot loop. I am not able to enter the recovery also. Not able to turn it off, it continuously restarts after the Samsung Galaxy M31w powered by Knox screen.
I have connected the USB to the PC and tried all the combinations to enter the recovery mode.
Kindly help please.
Use the buttons to try to force a hard reset.
Otherwise, let it run down until it auto shuts down unless you can easily pull the battery.
Charge to at least 50% before trying to boot up.
Hopefully it will at least allow access to the boot menu afterwards.
That really sucks... if you're near a Samsung Experience center drag it into them.
I'm having far less issues than you with Samsung updates but the recent Wearables update trashed my bt partially. It's still fighting me even after a roll back. grrrr... it was working fine until that forced update
you might need to use a cable to enter recovery or download modes now like other Samsung phones.
the instant the screen goes black try holding volume up and power and plugging in the USB cable that's connected to something on the other end.
Did you solved the problem???