Related
Hello!
After a freak accident during which my DHD landed in our heater (see attached photo - mind you, still works perfectly!!!), I got myself a nice SXE. Proceeded to gutting it, installed Revolution HD ROM, then tried to update the radio but it wouldn't do it.
Curious, I checked the bootloader. Where it said something like UNLOCKED at the top (??), now it says LOCKED... The full text:
Code:
***LOCKED ***
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.23.0000
RADIO-11.19.3504.29_2
OpenADSP-v01.6.0.2226.00.1227
eMMC-boot
Dec 26 2011,12:14:25
My question is, what exactly has been LOCKED again, and how did it happen?
Thanks so much...
[EDIT]
...and, of course, I found this minutes after posting, even though I had searched like a madman:
[09Jan]Helo my HBOOT says **Locked** when I updated to the new firmware
Ignore it, its fine, your still S-off and the bootloader is still unlocked. The only thing thats locked with the new firmware is the ability to perform advanced fastboot commands so flashing splash screens, pushing a radio. It wont affect most normal users, so no need to worry
Click to expand...
Click to collapse
Still, strange I couldn't flash the radio... file was pushed, but writing was denied...
With the Hboot "Locked", your phone can react to some adb or fastboot commands (push, reboot commands for example), but it's impossible to write any img on it.
If you want to change your radio, I think you must downgrade your Hboot by executing an older RUU (2.08** or 1.73**) and then, you will be back on an Hboot "unlockable" (Hboot 1.18** or less).
I didn't try to change radio, 'cause this one, RADIO-11.19.3504.29_2, is the last one and it seems Ok for my usage on ICS 4.3.1.
Things seem to have changed a bit since the days I was unlocking my DHD...
First things first: how do I make sure hboot (thanks - this was my initial question, I didn't know what LOCKED referred to!) is locked? Because, as I quoted,it seems that when you update the fw it says 'locked' even though it's unlocked.
But, if I downgrade through a RUU, if I update the fw again in order to flash Mike's ROM, I guess the same will happen?
Thanks for your reply!
Yep, if after downgrading by RUU, you flash Mike's firmware, you will have again the problem, because this RADIO-11.19.3504.29_2 is included in the FW.
To confirm your Hboot is really locked (for writing), you can try to flash any radio.img, with fastboot command.
You will see in your terminal, the img is send but it stays impossible to be written.
Interesting. So, basically, you need to flash the radio before updating the fw and before flashing the ROM... ok, staying with the one I have right now
Thanks again!
NO, it's useless to flash any radio before, 'cause when you'll update with Mike's FW, you'll get this Radio version 11.19.3504.29_2 again !!!....
So the simplest way is to keep this Radio version !!!
IMO, it is a good radio, but if you want to flash any GB custom rom, you will need the RiL files corresponding.
you will find it HERE.
Heh, that's what I thought, and it seemed weird to me... then how come Mike recommends another radio though (the one I tried to flash)?
Anyhow, thanks for the input, really appreciate it!
For his ICS based ROMs (ARHD v6.0.x), Mike recommends "11.65.3504.00U_11.19.3504.29_2 radio".
wideopen4ever said:
For his ICS based ROMs (ARHD v6.0.x), Mike recommends "11.65.3504.00U_11.19.3504.29_2 radio".
Click to expand...
Click to collapse
Yeah, but flashing his ICS/3.5 ROM (6.02) apparently gave me 11.19.3504.29_2?
Can the updated version be unlocked via HTC's online unlocker thing?
This one...
Skipjacks said:
Can the updated version be unlocked via HTC's online unlocker thing?
This one...
Click to expand...
Click to collapse
No. I tried doing it with the Revolutionary tool, which supposedly uses the same method and it told me it does not support this version...
Not sure if it will work with HTC's tool directly, though.
Skipjacks said:
Can the updated version be unlocked via HTC's online unlocker thing?
This one...
Click to expand...
Click to collapse
When I upgraded to hboot 1.20 used htcdev to unlocked it. Then upgraded to hboot 1.23 and it remained unlocked
Sent from my Kindle Fire using Tapatalk
krakout said:
Yeah, but flashing his ICS/3.5 ROM (6.02) apparently gave me 11.19.3504.29_2?
Click to expand...
Click to collapse
yes that is the newest radio for ICS, when you flashed the ICS UPdate it gave you everything ICS from hboot to radio, now all you had to do is find and 4.0.3 rom and flash and everything would match the ril/radio and hboot needed to keep it stable
Hi everyone!
I've been searching and reading around trying to solve a bootloop problem on my HTC Desire S/Saga (or at least I think it is a bootloop problem) but, so far, I've had no luck.
Here's what has happened and what's going on:
1) S-off and got hboot 6.98.1002 through revolutionary
2) phone worked normally for six months and suddenly, without any changes or flashes, it rebooted and started a boot loop, ie, I can't get into any in-OS menus.
3) Choosing recovery of factory settings from hboot menu just reboots the phone and restarts the loop.
4) I've tried flashing (both through fastboot and android flasher) the eng hboot 0.98.0000 and clockworkmod recovery images but neither had any effect.
Phone was vodafone-locked, running a vanilla Android 2.3.4.
hboot menu data:
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-3822.10.08.04_M
eMMC-boot
I don't have any backup data from pre-revolutionary, either :|
I'm knocking my head against the walls, hoping that the phone's only temporarily bricked... any ideas?
Thanks in advance for helping a n00b...
Doesn't sound like a hboot problem you me, but that could just be me. And I don't think flashing the stock hboot will help.
Are you sure you are flashing the ENG hboot? It's 0.98.2000. 0.98.0000 is most likely your stock hboot and can't be flashed over revolutionary hboot in most cases.
So to get back to stock stock..... You will need to run your RUU after the new hboot has been flashed.
Another option is for you to install a custom ROM and avoiding the RUU. I still suggest you flash the ENG hboot though.
Head for this thread for help
http://forum.xda-developers.com/showthread.php?t=1488672
Thanks everybody!
I've been away for the last few days so I haven't been able to test anything, but tomorrow evening I'll test both suggestions and post feedback.
Thanks again!
So, I've trying out your suggestions and...
foX2delta said:
Doesn't sound like a hboot problem you me, but that could just be me. And I don't think flashing the stock hboot will help.
Are you sure you are flashing the ENG hboot? It's 0.98.2000. 0.98.0000 is most likely your stock hboot and can't be flashed over revolutionary hboot in most cases.
So to get back to stock stock..... You will need to run your RUU after the new hboot has been flashed.
Another option is for you to install a custom ROM and avoiding the RUU. I still suggest you flash the ENG hboot though.
Click to expand...
Click to collapse
So I tried to flash the ENG hboot from this thread, using android flasher and later using this method, but adb never lists my Saga.
Fastboot lists it correctly, though. I *think* I had USB debugging on, if I recall correctly.
Using androidflasher I get a flash ok notice and then the bootloop just restarts...
Any ideas?
mOh19973 said:
Head for this thread for help
http://forum.xda-developers.com/showthread.php?t=1488672
Click to expand...
Click to collapse
Thanks moh19973, I'll leave feedback at your thread (no luck, though..)
thanks again to everybody
Opalid said:
Hi everyone!
I've been searching and reading around trying to solve a bootloop problem on my HTC Desire S/Saga (or at least I think it is a bootloop problem) but, so far, I've had no luck.
Here's what has happened and what's going on:
1) S-off and got hboot 6.98.1002 through revolutionary
2) phone worked normally for six months and suddenly, without any changes or flashes, it rebooted and started a boot loop, ie, I can't get into any in-OS menus.
3) Choosing recovery of factory settings from hboot menu just reboots the phone and restarts the loop.
4) I've tried flashing (both through fastboot and android flasher) the eng hboot 0.98.0000 and clockworkmod recovery images but neither had any effect.
Phone was vodafone-locked, running a vanilla Android 2.3.4.
hboot menu data:
SAGA PVT SHIP S-OFF RL
HBOOT-6.98.1002
RADIO-3822.10.08.04_M
eMMC-boot
I don't have any backup data from pre-revolutionary, either :|
I'm knocking my head against the walls, hoping that the phone's only temporarily bricked... any ideas?
Thanks in advance for helping a n00b...
Click to expand...
Click to collapse
Your problem sounds exactly like the one on the thread linked below.... in which case, if you just try the steps from the concerned thread, and are still unable to fix your device, it can be written off as another dead eMMC...
Just follow the instructions on this thread...maybe you will have better luck than the OP?
http://forum.xda-developers.com/showthread.php?t=1507106
So did your hboot change or not? If hboot and recovery won't flash then I have to agree with above, fried emmc :-(
yeah it could be an emmc problem, you may want to check the sticky in the development forum, if this is the real problem there is a possibility for a fix, not necessarily emmc replacement
enigmaamit said:
Your problem sounds exactly like the one on the thread linked below.... in which case, if you just try the steps from the concerned thread, and are still unable to fix your device, it can be written off as another dead eMMC...
Just follow the instructions on this thread...maybe you will have better luck than the OP?
http://forum.xda-developers.com/showthread.php?t=1507106
Click to expand...
Click to collapse
Thanks, tried everything and had the exact same results. Fried eMMC, I guess..
This is really wierd, I got a phonecall, turned the call off, the phone rebooted and entered the bootloop.
Nothing fishy or wierd, no flashing erros, just a regular phonecall from my boss. Damn :|
If only I could get the normal hboot on I could repair it under warranty
Well, thanks everybody
Try going for warranty repair, for a few guys over here at xda no one checked (or din not care) whether the phone was rooted or s-off when they went to service their phone. Maybe you'll get lucky too. Good luck!
Yes, I am a newb to the Sensation, but not flashing in general. I have previously had hacked SamVibrant, HD2, and most recently, the G2x, so I know from a constant flasher's POV generally what Im doing.
I've been searching for answers to this for days now, and nothing really seems to work, so let me just start with what is going on.
CURRENT STATS:
-PHONE-TMO Sensation 4g
-S-OFF
-ROOTED
-BOOTLOADER-1.23.0000
-RADIO-10.14.9035.01_M
At the top of the bootloader screen it says ****LOCKED**** Which I am guessing is obviously in refrence to the bootloader itself.
Also I currently have the latest 4EXT recovery flashed. When I got the phone it had CWM 5.00.2 or whatever the latest was.
Just bought a Sensation from a guy on Craigslist, and when I got it, it had a CM7 AOSP ROM running on it. I definitely wanted ICS, so I started reading and trying to get it.
So I started here:
http://forum.xda-developers.com/showthread.php?t=1192300&highlight=hboot+1+23
I tried the PG58IMG.zip install via the bootloader, but kept getting errors and security fails. So I researched more and found a post about how to fix that, but the problem is that there is almost always a need to use Revolutionary, and I can't because it doesn't support the 1.23 bootloader.
I have also tried the PG58DIAG via bootloader, and still got mismatch and security errors.
I also just recently tried flashing back to the "REALSTOCKEXPERIENCE" stock ROM which was successful, but it didn't fix my bootloader or unlock woes. Lastly I tried the HTC dev Unlock, and it would not work, because When I got to the part where it attempts to connect to the phone via USB to do get the identifier token it would not connect. It just kept waiting. I tried resetting my phone and reloading the BL but it would not work.
Also I have noticed that I cannot get my phone to connect VIA USB to the PC when in FASTBOOT or Bootloader. Is that normal?
Please help a brother get some ICS on my new phone! I loved my HD2, although it was a bi#$% to flash sometimes, I loved it, and that is why I went with HTC again. This all makes me miss my Vibrant, where you could flash all day long and root without a computer... Good times....
You're already s-off, so most of the work has already been done for you. Make sure you have fast boot unchecked in power options in your current rom. After that, all that's left to do is check your cid. If you're supercid, then grab any 3.32 base firmware from one of the many rom threads in our dev forum, install it via bootloader, remove the firmware file from sd card (do it from pc after you power down the phone), then flash a rom. This will also upgrade your bootloader to 1.27 unlocked and change your radio to the latest. Don't forget to check md5!
If you're not supercid, then you'll need to find kohr-ah's firmware thread because he has corresponding firmware for all cids. Then grab any rom and enjoy.
As for connecting fastboot via USB, you need the htc sync drivers installed on your PC.
Sorry for lack of links. I'm on mobile and searching is a PITA on the phone.
/edit
Make a nandroid backup before you do any of this.
Thanks a bunch. I will give it a go a third time, but that is one of the problems that I am having, is that I can't flash anything via bootloader. I just get tons of errors...
Lets see if the third time is a charm.
EDIT: I still can't use revolutionary for Super CID because the bootloader is 1.23, but I used a Terminal window and the getprop ro.cid/mid and got this:
Cid-T-MOB010.... is this super CID'd?? I was looking for a reference post, but cant remember where I found it before.
no you are not super cid, it would say 111111. But your good everything is already done really.... Go to kor ah's noob friendly firmware thread, find the 3.32 firmware from T-Mobile with the tmobo10 included. Put it on the root if your SD and there you go flash an ics rom. Just remember to delete it after.
Sent from my HTC Sensation Z710e using xda premium
delete this please
wadill said:
no you are not super cid, it would say 111111. But your good everything is already done really.... Go to kor ah's noob friendly firmware thread, find the 3.32 firmware from T-Mobile with the tmobo10 included. Put it on the root if your SD and there you go flash an ics rom. Just remember to delete it after.
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
^^ This. Kohr-Ah's thread is the way to go then.
On a side note, you might be able to write supercid after flashing the 1.27 bootloader because the one floating around is already unlocked by revolutionary. Why bother? Because it'll make things easier if we have to upgrade our firmware again in the future.
antiparadigm said:
Thanks a bunch. I will give it a go a third time, but that is one of the problems that I am having, is that I can't flash anything via bootloader. I just get tons of errors...
Lets see if the third time is a charm.
EDIT: I still can't use revolutionary for Super CID because the bootloader is 1.23, but I used a Terminal window and the getprop ro.cid/mid and got this:
Cid-T-MOB010.... is this super CID'd?? I was looking for a reference post, but cant remember where I found it before.
Click to expand...
Click to collapse
Forget Revolutionary. You are already S-OFF so you don't need the tool any more. All you need to do is flash the 3.32 firmware (it comes with HBOOT 1.27, ICS won't boot on 1.23) from >here<, and SuperCID (look here at step 4: http://forum.xda-developers.com/showthread.php?t=1192300).
Okay, I am on the right track now. I hunted and hunted, and finally found a PG58IMG that would flash on my bootloader. That put me on the 1.27 bootloader which allowed me to flash the unlocked 1.17 Bootloader which previously would not flash. now I am trying to get the RUU to flash me back to a non-Rooted ROM so I can reflash the 3.32 and then ICS... Once again, I miss my Vibrant's flashing simplicity... but it will all be worth it.
Thanks for your assistance, everyone with positive non-flaming comments. Expect your thanks buttons to get some love!
Someone else correct me if I'm wrong here due to misunderstanding that last post...
But if you're on the 1.17 bootloader unlocked and everything is smooth there, you should be able to flash the 3.32 firmware right not, then flash whatever ICS ROM you want. The current ROM should have no bearing on this. There is no reason to flash to a non rooted ROM just so you can immediately flash a new ROM.
You just need to have either Clockwork or 4EXT recovery installed to flash the ROM. (And you'll need 4EXT to flash a couple of them. Not all will work with Clockwork)
antiparadigm said:
Okay, I am on the right track now. I hunted and hunted, and finally found a PG58IMG that would flash on my bootloader. That put me on the 1.27 bootloader which allowed me to flash the unlocked 1.17 Bootloader which previously would not flash. now I am trying to get the RUU to flash me back to a non-Rooted ROM so I can reflash the 3.32 and then ICS... Once again, I miss my Vibrant's flashing simplicity... but it will all be worth it.
Thanks for your assistance, everyone with positive non-flaming comments. Expect your thanks buttons to get some love!
Click to expand...
Click to collapse
Thanks for the thanks.
Though once you had the 1.27 revolutionary bootloader, you could've just flashed an ICS rom right then and there and been done with the whole thing. The 1.27 bootloader that's floating around actually comes from the 3.32 (rom base) firmware so you would have been good to go. You really didn't need to revert to 1.17 hboot and flash a non rooted rom.
Don't worry, it really is easy flashing a Sensation, you'll see. It's just that a lot of our guides are outdated and end up confusing people who come into the scene post gingerbread.
/edit
Skipjacks is right. You can go from 1.17 hboot to 1.27 hboot (3.32 rom base firmware) without worrying about your current rom.
I had tried to flash the ICS Rom several times, only to have Boot loops and get stuck. I was following several guides posted here that say that you have to be on a non-rooted rom. I will give it another go to see if there is any change.
That's really weird. Which ICS rom are you trying to flash?
Did you get the T-MOB010 3.32 firmware from here and make sure md5 was correct? This firmware is really the only prerequisite for flashing a 3.32 base ICS rom.
Just keep in mind that 3.32 firmware only works for ICS and will bootloop a gingerbread rom.
There's a really good and simple step by step on how to flash ICS in the first post on the link. Check it out.
OMG It Works! I was boot looping like crazy and could not get anything to boot!
I am not sure but I think the problem may have been the radio, or the wrong Firmware for my CID. My phone would not work with the adb Radio.imgthough so I left it alone.
Correct me if I am wrong on the radio idea, but I flashed the 3.32 and I would get stuck at the White HTC screen. Tried SuperWiping and Flashing three different Roms and no-go.
Then I found this thread:
http://forum.xda-developers.com/showthread.php?t=1459767
I downloaded the right one per my TMO CID and was able to flash it, which also updated the Radio. After another superwipe and Rom Flashing, it worked!
THanks again for all of the help. You are all really appreciated. ALong with this whole community.
Haha that's Kohr-Ah's thread where we were telling you to go to for 3.32 firmware.
Honestly, I'm not really sure what was causing your bootlooping. There's so many little things that could cause a bootloop, it's hard to pinpoint. But hey you've got it running now so it's all good.
Welcome to ICS and welcome to the Sensation community.
Hey guys
I've got a bit of a situation. A friend of mine gave me this sensation (carrier T-mobiel) wich was all but bricked. Since I have some experience rooting and flashing custom ROMs, he asked me to give it a try at reviving it.
The owner had been messing around a bit himself and he managed to install clockwordmod recovery. Don't know if he installed any ROM, the device gets stuck on splashscreen.
I did the following; full format, superwipe and install a ARHD ROM. result was te same; stuck on splash-screen.
Then I did another full format, wipe and installed Cyanogenmod, still the same result.
I wanted to try and install 4EXT touch recovery, but the device doesn't respond to any USB connection method so ADB won't work. there's no working ROM so installing through the app won't go either. basicly, I don't know if there's a way to uninstall and install a recovery through flashing.
I have another phone to use to store required files on a SDcard.
these are the things dat DO work:
Bootloader, fastboot and clockworkmod recovery v5.8.0.9
this is the device's bootloader information
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
RADIO-10.14.9035.01_M
Aug 2 2011, 22:35:52
my guess is that I'm trying to install ROM's that don't work with the current firmware. I don't know if the owner installed the OTA ICS before he got these problems. But I don't know what firmware is currently on this this device, and how to check it.
Lost for clues here and calling out for help
Onemanshow
onemanshow85 said:
Hey guys
I've got a bit of a situation. A friend of mine gave me this sensation (carrier T-mobiel) wich was all but bricked. Since I have some experience rooting and flashing custom ROMs, he asked me to give it a try at reviving it.
The owner had been messing around a bit himself and he managed to install clockwordmod recovery. Don't know if he installed any ROM, the device gets stuck on splashscreen.
I did the following; full format, superwipe and install a ARHD ROM. result was te same; stuck on splash-screen.
Then I did another full format, wipe and installed Cyanogenmod, still the same result.
I wanted to try and install 4EXT touch recovery, but the device doesn't respond to any USB connection method so ADB won't work. there's no working ROM so installing through the app won't go either. basicly, I don't know if there's a way to uninstall and install a recovery through flashing.
I have another phone to use to store required files on a SDcard.
these are the things dat DO work:
Bootloader, fastboot and clockworkmod recovery v5.8.0.9
this is the device's bootloader information
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
RADIO-10.14.9035.01_M
Aug 2 2011, 22:35:52
my guess is that I'm trying to install ROM's that don't work with the current firmware. I don't know if the owner installed the OTA ICS before he got these problems. But I don't know what firmware is currently on this this device, and how to check it.
Lost for clues here and calling out for help
Onemanshow
Click to expand...
Click to collapse
Hi,
2 things you can try.
1.Run a GingerBread RUU.
Look HERE
2.If that works,try s-off.
Look HERE
Then,you could change firmwares and do whatever you like.
Hi Malybru,
I understand what you suggested and I'm currently working on it. Only I can't find the right RUU for this phone.
Current CID is: T-MOB003
getting it superCID'd was no go since I can't get it S-OFF with the revolutionary utility. is there another way to S-OFF the phone besides revolutionary?
edit: I downloaded and executed a RUU that apearantly wasn't compatible with the phone. I'm guessing it removed whatever ROM was installed, but didn't install the ROM from the RUU.
I also followed step 3; RUU to restore stock up to the part of relocking the bootloader. I didn't come any further cause I can't find the right RUU.
the phone now only boots into bootloader with "security warning" displayed below "relocked".
I'm guessing, if I find the correct RUU with gingerbread, things will be okay again.
on a sidenote, does a RUU install also returns the recovery to stock?
onemanshow85 said:
Hi Malybru,
I understand what you suggested and I'm currently working on it. Only I can't find the right RUU for this phone.
Current CID is: T-MOB003
getting it superCID'd was no go since I can't get it S-OFF with the revolutionary utility. is there another way to S-OFF the phone besides revolutionary?
Click to expand...
Click to collapse
Hi,
RUU does not matter too much as long as it is Europe and GB.
If you can find a dutch tmo ,then even better.
No harm will come if it is the wrong one.
It will only throw up an error.
This will at least get a ROM on your phone,so that you can s-off .
Revolutionary is the easiest way to s-off.
so, to summarize:
the RUU has to be TMO for either UK or EU. Does the radio need to match the one that's currently displayed in the bootloader?
onemanshow85 said:
so, to summarize:
the RUU has to be TMO for either UK or EU. Does the radio need to match the one that's currently displayed in the bootloader?
Click to expand...
Click to collapse
Hi,
The closer the match,the more chance of success.
But close will do.
Yes,with the same radio.
finding a dutch RUU with this radio for TMO is pretty challenging. So I tried it with a german version (DE). Other then that it matches the radio, and the carrier.
the first method through the RUU.exe failed, it tells me to get the right RUU for my carrier/phone.
So I tried it through flashing with a SDcard. I changed the CID in the notepad file in the PG58IMG.zip to T-MOB003. In bootloader, it checks the file twice and after that nothing happens, the regular bootloader screen is prompted.
Then I tried to flash it through fastboot CMD command, pretty much my last option according to the guid you linked me. This also fails with the notification that it failed to verify 12 signatures.
now I found some universal firmware packages but they don't seem to contain any ROM and recovery, only firmware. are there any of these universal packages as complete RUU?
or is there a way to bypass the signature check with a fastboot command?
onemanshow85 said:
finding a dutch RUU with this radio for TMO is pretty challenging. So I tried it with a german version (DE). Other then that it matches the radio, and the carrier.
the first method through the RUU.exe failed, it tells me to get the right RUU for my carrier/phone.
So I tried it through flashing with a SDcard. I changed the CID in the notepad file in the PG58IMG.zip to T-MOB003. In bootloader, it checks the file twice and after that nothing happens, the regular bootloader screen is prompted.
Then I tried to flash it through fastboot CMD command, pretty much my last option according to the guid you linked me. This also fails with the notification that it failed to verify 12 signatures.
now I found some universal firmware packages but they don't seem to contain any ROM and recovery, only firmware. are there any of these universal packages as complete RUU?
or is there a way to bypass the signature check with a fastboot command?
Click to expand...
Click to collapse
Hi,
Try the European RUU with the 10.14 radio that matches yours.
Add your CID in the PG58IMG text file.
Make sure you have the phone in fastboot when you attach your USB cable(it should say "fastboot USB"),and start running the RUU from your PC.
http://db.tt/A7lS7PaD
Here is a link to 4ext touch recovery as a IMG. http://db.tt/KFKpcrhB and here is a pg58img.zip. put the zip file onto the sdcard and boot to boot loader. It will hopefully flash the recovery. If not fast boot flash the IMG. Once you have the recovery installed enable smart flash and then flash the roms. Hopefully that will work for you
Sent from my HTC Sensation using xda premium
tnx for the files.
I tried the suggestions you made but flash from sdcard doesn't work; it checks the file once and doesn't do anything after it.
when I try to flash either one of the files through fastboot I get signature verification fail.
my bootloader says RELOCKED, I got that after following step 3.1 in the RUU flash guide to return to stock. I don't know if this is blocking anything from being flashed with the nasty signature notifications?
also, most like because nothing is installed on my device, when I plug in the USB cable when it's turned off, it automatically swithces on displaying SECURITY WARNING below RELOCKED.
Damn, wasn't fast enough. I'm not sure what the best way to approach this is. Either attempt to full s-off the device with revolutionary/ jupuntobear, or re-unlock your boot loader with htcdev, then fastboot flash the recovery. Then install the rom. Then run jupuntobear to full s-off
Sent from my HTC Sensation using xda premium
heavy_metal_man said the right thing. First focus on unlocking it on hTCdev.com and afterwards, flash a 4Ext Recovery to make things easyer. Then put the device in bootmenu (not in the Graphic shell) and attach a USB, start any Official European RUU that is Gingerbread - with 1.50 in the numbers.
an update
I managed to get it unlocked again with htcdev.com. After that I flashed 4EXT recovery, succesfully.
only thing now I need to do is installing a ROM. I tried the following without succes so far:
with RUU
I can't find a dutch RUU for TMO with radio 10.14.9035 anywhere so I tried the closest match possible, a german one. through the .exe method I get incompatibility errors. So I extracted the ROM/.zip, added my CID and tried with SDcard flash and fastboot flash, both unsuccesfull. Hboot checks the file twice and does nothing afterwards, and fasboot prompts the message "FAILED (remote ** unknown fail)"
Universal firmware package to make sure I'm on 3.32, so I can install ARHD 6.7.2 or any other ICS rom
I took one from http://forum.xda-developers.com/showthread.php?p=21711154#post21711154.
I get the same errors as when I was trying to flash the ROM.zip from the RUU, both with sdcard flash and fastboot flash.
a random Gingerbread ROM
I found this GB ROM http://forum.xda-developers.com/showthread.php?t=1226564.
I installed it through EXT4. after a reboot it's stuck in a bootloop. No splash screen is shown however, it get's to the withe-field-green-HTC-screen and reboots after, showing the same.
I don't understand what's wrong. I got a good recovery now and the bootloader is unlocked. For some reason the ROM's I tried are incompatible with the current state of the device and I can't figure out why. are dutch T-mobile branded phones so tough to crack or what?
also, after a certain step wich I can't remember, my bootloader doesn't display a radio anymore.
Current bootloader:
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT-1.18.0000
eMMC-boot
Aug 2 2011,22:35:52
EDIT: I would be less restricted in my actions if the damn thing were to be S-OFF. is there any way to get get S-OFF through bootloader/fastboot? All the S-OFF methods and utillities I found so far need the device to have a ROM running.
SOLVED
with help of KGS1992, I managed to restore the device.
- installed a stock GB ROM since I was on hboot 1.18, and to get root acces
- aquired root through adb
- gained S-off with revolutionary
reason why I couldn't manage this before is because I didn't have a genuin stock ROM.
tnx all for the help
onemanshow85 said:
SOLVED
with help of KGS1992, I managed to restore the device.
- installed a stock GB ROM since I was on hboot 1.18, and to get root acces
- aquired root through adb
- gained S-off with revolutionary
reason why I couldn't manage this before is because I didn't have a genuin stock ROM.
tnx all for the help
Click to expand...
Click to collapse
Glad you got sorted pal and thanks for letting us know
WARNING*WARNING*WARNING
do this at your own risk! This is for s4 only!!
It has been brought to my attention that there might be a mid (model id) conflict
With flashing this and me along with others are trying to narrow down the issue. Thanks to @real187 for bring this to my attention.
I'm
S-off
Cid 11111111
MID PJ4011000
And had no problems flashing this firmware but others with same setup have reported soft brick.
OK I think @mkinney88 may have pin pointed where the soft brick may be coming from. If you s-off using facepalm, flash the firmware.zip and get soft bricked try this.
1. Get back to s-on (warning read directions several times before doing you CAN hard brick your phone) ~ http://forum.xda-developers.com/showthread.php?p=38267667
2. Get s-off with moonshine ~ http://forum.xda-developers.com/showthread.php?p=42613403
First off this is mostly ment for the T-Mobile branded phones but ill try and help all please let me know when asking questions if you have a T-Mobile or HTC branded phone (it has it right on the front of phone ).
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111 (I had no problem flashing firmware with s-off and Cid 11111111 but others have reported problems so if you don't want to chance it write your Cid to T-MOB010)
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Downloads
FIRMWARE ZIP DOWNLOAD
https://drive.google.com/folderview?id=0B-BYnLh2sosKamRwaUJJS05oU3M&usp=sharing or http://db.tt/Wua8mDS2
Credit go's to mkinney88 for the firmware
Bricks
First off if you can get into bootloader then you don't have a hard brick.
If your phone is in the black screen of death there may be hope but we're still trying to figure that one out.
If your phone doesn't respond to any input from you (power, power+volume down) then congratulations you have a hard brick but don't through it in the junk drawer just yet, you can have it jtag repaired (they open phone plug into main board and flash everything)
Here's the link (you do have to pay for this)
http://forum.xda-developers.com/showthread.php?p=37136553
One more just in case
rc420head said:
I'm starting this thread to have a place for noobs and long time users to ask and answer questions. This is going to be as noob friendly as possible but please keep questions firmware related only. So lets get started.
i really dont know how to make it any clearer then @mkinney88 did in his rom OP. all credit goes to him these institutions.
By: Mkinney88 (UnKnown_ROMS)
--> Unlock your device
Step1. download and use this program to unlock your bootloader http://forum.xda-developers.com/show....php?t=1604677
Step2. SuperCID your phone so you can S-OFF and so you can also write the T-MOB010 CID if you are on a different carrier and want to run this ROM. You will need to be CID T-MOB010 if you want to run the firmware.zip Follow this to SuperCID http://forum.xda-developers.com/show...1#post26516911
Step3. After you have sucessfully unlocked your bootloader and SuperCID you can either S-OFF your phone or Not, it is up to you. I would recommend you achieve S-OFF so you can flash radios, kernels, and boot.img's. Follow this to achieve S-OFF http://forum.xda-developers.com/show....php?t=2155135
If everything went well you should be able to reboot into bootloader using the All In One Tool and in the top left your bootloader should say Unlocked, S-OFF, CID-1111111
--> Writing T-MOB010 CID
If you did everything right then your all set. Next you will want to run the fastboot command " fastboot oem writecid T-MOB010 " and reboot into bootloader again. Now in the top left it should say CID-T-MOB010. If you have made it this far you are doing great. Now we are going to run the firmware.zip package to ensure everything works without a problem.
--> Flashing the firmware.zip
Now if you are coming from STOCK OEM LOCKED T-MOBILE PHONE that already has Andorid 4.1.1 Jelly Bean on it then you do not need to do this step. You must be CID T-MOB010 to flash this or S-OFF CID 11111111
1. fastboot oem lock
2. fastboot erase cache
3. fastboot oem rebootRUU
4. fastboot flash zip firmware.zip, and you might get an error
5. fastboot flash zip firmware.zip again and it should pass and install a bunch of files should take about 2 minutes.
6. the phone does NOT reboot on its own so #7
7. fastboot reboot or fastboot reboot-bootloader
--> UNLOCKING BOOTLOADER AGAIN
Now we need to unlock the bootloader again so just do step 1 again but you will already have the Unlock_code.bin from the first time you unlocked you phone so no need to get another one from HTC but if for some funny reason it doesn't work you will need to just resubmit for a new one.
--> CUSTOM RECOVERY
After doing all the above steps you will need to install the custom recover. You will need to use TWRP 2.3.3 to insure no problems. Here is the link to download it http://techerrata.com/file/twrp2/vil....3.0-ville.img after you download it go to the DIR where you have the HTC One S All-In-One Toolkit v3.5 extracted. example: C:\Users\yourusername\Downloads\One_S_All-In-One_Kit_v3.5\One_S_All-In-One_Kit_v3.5\Data\Recoveries and in the Recoveries folder rename the downloaded twrp2.3.3.img to TWRPS4.img and replace the one that is in the folder and then proceed to install the recovery,
now youve followed that and now your stuck ether getting errors or phone is now acting all erratic? that's why you're here. go ahead ask any question you want about firmware noobish,dumb,anything as long as its firmware related. (sorry i cant tell you how to get the cute girl at the mall)
this is just a crude start ill add and refine as we get going.
please do don't ask firmware questions in development threads ask here.
If you want to see mkinney88's full guide go here paste bin
Click to expand...
Click to collapse
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
vatsaman said:
Don't flash the firmware on SuperCID which leads to brick, which can be recovered though
Click to expand...
Click to collapse
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
I put a note of this in op just now, thanks for the warning, I'm trying to figure out why some can do this Cid 11111111 and some can't.
-----------------------------------------
Friends don't let friends post without searching first!
rc420head said:
Bricks can't be recovered (unless you jtag) , you had a soft brick.
I had no problem doing this with s-off and Cid 11111111.
But I remember you from other threads and I have a few questions.
1. Is your phone t-mobile branded or htc? 2. When you first did the firmware update what was your hboot version?
-----------------------------------------
Friends don't let friends post without searching first!
Click to expand...
Click to collapse
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
Something else is going on. I used facepalm, and Cid 11111111 to flash firmware twice now with no issues and started same as you hboot 1.14
-----------------------------------------
Friends don't let friends post without searching first!
thank you!
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
khan.orak said:
I'm on Stock JB 4.1.1 and my CID is BM___001, rooted, unlocked BL.
There is no RUU for this CID and only a JB OTA, The radio version and software version match with those of the phone.
my question is: Without S-OFF and SuperCID, Can I use the OTA.zip to be flashed for getting stock ROM? e.g if I am on CM 10.1 and I want to revert back to stock, can I use the OTA.zip?
Click to expand...
Click to collapse
I'm not sure if I understand your question. So let me ask a few questions.
What hboot are you on?
What carrier are you using?
Are you wanting to try cm 10.1 and afraid for losing stock?
What is stock just HTC sense 4+ or is there carrier added stuff?
rc420head said:
I'm not sure if I understand your question. So let me ask a few questions.
Click to expand...
Click to collapse
ok I'll try to make it clearer.
What hboot are you on?
Click to expand...
Click to collapse
I'm on hboot 2.15.0000
What carrier are you using?
Click to expand...
Click to collapse
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Are you wanting to try cm 10.1 and afraid for losing stock?
Click to expand...
Click to collapse
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
What is stock just HTC sense 4+ or is there carrier added stuff?
Click to expand...
Click to collapse
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
khan.orak said:
ok I'll try to make it clearer.
I'm on hboot 2.15.0000
This phone is from Bell Mobility Canada, but I'm not using this carrier.
Exactly!! this is what I was asking. There isn't any RUU for stock JB 4.1.1, for the CID BM____001.
Stock sense is 4+ and is heavily bloated. It has got apps like DropBox, Let's Play Golf, Friend Stream, HTC Media Link HD, Polaris Office etc.
Click to expand...
Click to collapse
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
rc420head said:
OK since your on hboot 2.15 there's no need to upgrade firmware.
Since there is no RUU for stock the next best thing would to to make a back-up of stock using a custom recovery I would recommend twrp 2.3.3 (if you need help with this just ask that's what this thread is for)
Then I would copy the back up to your pc for safe keeping (you might even want to back it up on a cloud too I'd recommend goggle drive or Dropbox)
Click to expand...
Click to collapse
Thanks for the reply, really much appreciated.
I already have rooted the device and custom recovery TWRP 2.5. Though I am considering to downgrade it to 2.3.30. Now I made a backup of stock ROM. (System + Boot Partition)
So is this the only way I can get to stock?
I read somewhere that the following method could be used too(?)
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
khan.orak said:
S-OFF ---> Run an older RUU for Bell Mobility (probably ICS RUU) ---> Then update OTA.
Is this valid?
Click to expand...
Click to collapse
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Big thanks! :good:
vatsaman said:
Yeah mine was a softbrick. If you stroll over, u can find many people in my queue. May be it is happening only for people who got S-OFF with the Facepalm way. I was on Hboot 1.14 and so a T Mob branded one.
Also you will see a warning in Facepalm thread that flashing firmware on SuperCID phones likey causes a brick.
Click to expand...
Click to collapse
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
ardax said:
Yes, if an older RUU is available for your CID just get S-OFF first then use it. Then you'll be able to update via OTA.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Yes this will also work (I was under the impression no ruu's were available)
khan.orak said:
Big thanks! :good:
Click to expand...
Click to collapse
forgiven90 said:
This is very interesting to me because I have a unbranded one s from a small spinoff of T-mo in Iowa. I got s-off with facepalm and SuperCID at the same time, then on hboot 1.13. Now recently I upgraded hboot to 2.15 with a euro RUU, soft bricked but was able to recover with only a firmware flash. (details are a bit fuzzy right now) I didn't relock the bootloader, but did install stock recovery. Ever after this stunt I've had tons of problems with radio disconnects. I first thought my problem was hardware, but I just got it back from a very good repair shop and the same thing. Although better on a different carrier, I suspect only because the better carrier has stronger signal. I'm ready to try a older RUU or euro firmware or just about anything, this phone only has service 10% of the time where it used to be 100% right now I'm running the latest Trickdroid 10.3.2 Changing the fast.dormancy=2 helped a tiny bit but it's something more fundamental than that I'm thinking... Sugg anyone??
Prolly should add I'm using the euro 1.15 radio. Thanks
Edit, looks like maybe my problems may only be build prop related, if I change to.til.radio.svn=19 to 5 I get an instant connection, but only G...
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.fast.dormancy.rule=0
ro.ril.radio.svn=5
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Yeah disabling the fast dormancy solved all my problems. :good: