So I bought this off eBay to replace the screen and fix it, but when I opened it up I found this(look at pictures) one of the ribbon holders fell apart as I took off the tape. God knows how it was working. The drop must of shattered it. So any suggestions on what I should do, I was thinking some really strong tape to keep the ribbon in place but I doubt that will last very long. The bottom part that connects it is still in good shape.
Related
Hi,
My nexus one screen cracked (after falling from 3 feet high) and I need a replacement for the digitizer. I've found this one on dealextreme but I don't know if it will work properly. Has anyone tried it?
http://www.dealextreme.com/details.dx/sku.40671
I've also got this other option. A little more pricy
http://cgi.ebay.es/GENUINE-HTC-NEXU...ssories_RL&hash=item2eaeddd484#ht_2322wt_1137
by the way, can the "plastic opening tool" be replaced by a guitar pick?
thanks a lot
I can't help you with the digitizer but the guitar pick should work fine, it'll just be more difficult.
josealb said:
Hi,
My nexus one screen cracked (after falling from 3 feet high) and I need a replacement for the digitizer. I've found this one on dealextreme but I don't know if it will work properly. Has anyone tried it?
http://www.dealextreme.com/details.dx/sku.40671
I've also got this other option. A little more pricy
http://cgi.ebay.es/GENUINE-HTC-NEXU...ssories_RL&hash=item2eaeddd484#ht_2322wt_1137
by the way, can the "plastic opening tool" be replaced by a guitar pick?
thanks a lot
Click to expand...
Click to collapse
http://cnn.cn/shop/google-nexus-digitizer-p-8252.html
it would be funny if this one is better than the stock one (ie no multitouch/calibration issues)
I have a hunch they are all the same, but please don't hold me to that.
I got the one from ebay, and it worked find with no calibration issues at all.
Note that this is not an easy swap at all. The way this thing is built is pretty incredible. I found someone who tore one down on youtube, and it was split into something like 30 separate videos, and used them to figure it out. I was so surprised and excited that it still worked when I was done that I nearly dropped it again
Note that the one that I got DID NOT come with adhesive. I had to fabricate my own using scotch double stick tape and a knife, and it wasnt perfect. When I was done it seemed to stick well, but there were a few places I could see the tape sticking out slightly, and I'm sure since the seal wasn't perfect that lint would have eventually worked its way inside.
(I ended up sending it off to HTC for an overheating issue and faulty lock button, and elected for the advance replacement, so I ended up with a shiny new phone minus the battery cover they made me keep)
I wish you luck in the repair, I hope you've got a light touch and some heavy patience.
have you tested that digitizer for the dreadful multitouch issues before sending it to htc?
i would love to replace mine, it's getting on my nerves :/
It's so hit-and-miss,I just bought one replacement in lightake.com,I received it today,and I put it on my digitizer.
I bought one off ebay.. went w/a us seller "wholesalegadgetparts" so i could get it quickly the digitizer works fine
as far as adhesive to hold it to the "black frame" i used a 3M double stick tape (cut into very slim strips) that was fairly thin (if its to thick, it'll pop out beyond the aluminum frame when assembled) also used a drop or two of super glue on the top portion..
what sucked was after i got everything back together, my lcd went bad (guess i was mashing it a bit to hard when getting them to stick to the frame) so I bought one off ebay for around $50, seller was "smartlaptopparts" shipped from cali, so quick turn around, and did appear to be "oem"
screen is beautiful now, overall was very happy w/the purchases
Has anyone seen a good take apart/repair guide for the Inspire4G. Just got digitizer replacement and cannot for the life of me figure out how to attach the ribbon cable without totally disassembling the phone. Hoping to avoid this.
If this is the wrong forum, please direct me to a better one rather than flaming me.
Thanks
Fairly certain that ifixit.com has a good teardown.
Sent from my SGH-T959 using XDA App
Thanks for the tip, but I find nothing for the DesireHD/Inspire4G there other than a total disassemble for the HD that I've already seen, but really did not help me. I just need to change to touch screen. I appreciate the try though.
Got it apart. And kinda back together. Apparently it is not a good idea to reuse the double sided tape that holds the LCD to the motherboard and the digitizer to the LCD. At least the phone works. Now, must order some proper adhesive tape and redo the whole thing.... Took me about 6 hours for whole breakdown and rebuild. Doesn't really seem to fit back together all that well though. Maybe I'll videotape my next breakdown.
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Jeffsmashkot said:
Couple of questions as my phone is in need of a new digitizer too.
Did you have any other adhesive tapes in the process?
What did you use to cut the tape that held the LCD together after you baked it?
Does the phone mostly feel the same now that you have it back together, or does it feel flimsy now?
I'm disappointed that it's this difficult to replace the digitizer.
Click to expand...
Click to collapse
Just so you know, I was a TOTAL noob in phone deconstruction. That being said, the old adhesive seemed quite sticky after i took it apart so I just reused it. Mistake number one. Once it was back together, i notice it slowly opening up like an accordion. The tape wasn't holding and the LCD, digitizer assembly started to rise up. I have since ordered some adhesive tape from the place I got the digitizer from. Definitely get the tape.
I did not bake it as in the video (i assume you watched the same one I did). I used an old spark plug gauge tool thingie to just cut through the tape. It was still really sticky so after i struggled to insert the digitizer ribbon cable, I just reused it. Don't do this. Get new tape.
I did have some plain old scotch double sided tape. I used it in one spot. Lesson: Don't use this stuff. Get new tape.
Did I mention that I think you should get new tape? All in all, it was quite laborious. I went really slowly so as not to brick it. When it was done the phone worked, but like I said the LCD raised up after a couple of minutes. The adhesive was not working anymore. At least I have gained confidence for the next take-apart. I can't believe i GOTTA go alll the way back to total break down. Aaaarrrgh.
So something like this should do the trick?
http://www.harborfreight.com/32-piece-sae-metric-feeler-gauge-32214.html
Thanks for the heads up... Where exactly do you recommend putting the tape? Does it just go on the black edges of the digitizer, or does it actually go on the surface of the LCD? Sorry if that's a noob question, but I haven't gotten the glass off and I want to make sure I have enough adhesive tape from the Ebay Vendor. Did you have any issues with reusing the mylar?
Sorry for the 1000 questions, I really don't want to shell out off contract prices for another phone...
Mylars were all reusable if removed carefully. I photographed every step so I would know what to put back where. Still waiting for my tape from Repairs Universe. The biggest two culprits are:
1] Tape holding back of LCD to the silver chassis frame and
2] Tape holding SIM FPC to the main board.
You might also tape the PCB cover to the upper board, mine was loose after rebuild.
That I believe that is it for the major tape requirements. Of course the digitizer needs to be taped to the LCD. I'm curious, though, the tape framing the LCD holding the digitizer seemed to have some thickness to it. Almost like foam rubber, quite thin, but thicker than regular cellophane tape.
Good luck. Let me know if you have any tips after your attempt.
Got the tape. Retried to rebuild with new OEM tape. Same result. The phone when completed expands like an accordion. The digitizer/LCD assembly does not stay stick to whatever is under it. I know when to admit defeat. Looks like I'm shelling out 500 for another phone. At least I have spare parts!
yeah i was going to do my screen myself till i seen the tear down & then called afew places around here that does screen replacements and said NO we won't touch the Inspire, i spent the money and let HTC fix it. was worth it they replaced the whole shell not just the screen ... IE lcd / digitizer / Outer case that was scratched and dented... basically a new phone with the guts out of my phone
I attempted to do this and let me just say that I too now have spare parts. I purchased a phone off of ebay. I didn't realize the no contract price went up to around 500.00 I should have gone directly to HTC. Live and learn...
I will be in possession of an HTC Inspire for testing purposes that also has a cracked screen. Not sure how bad it is but I was planning on just replacing the display for learning purposes. However it seems that it may not be worth the time spent.
If I do decide to give it a go I'll post my results here. First thing is to acquire new tape. Did you all purchase it locally or did you buy the adhesive online?
YouTube has lots of videos. Best to watch a few a see the best way. If you are scared to break it best you send it in for repair instead. Get a digitizer and screen combo.
Why would you ever care if you damage the screen while taking it out since you're probably replacing it anyway? I have no clue. But I thought I would give it a try, and now i'm sharing.
So I managed to remove the screen and the frame without breaking anything (granted the screen wasn't working already)
i.imgur.com/cpKVP
What I did was cut off little strips from a credit card or any sort of plastic card. Then heated only the back side of the frame. I figured if I tried heating the screen from the front, the glass and screen adhesive might start separating. Then I worked the strips in between the frame and screen through the holes in the frame.
i.imgur.com/iql8z
You might be wondering why there are places ground down on the frame... I'll get to that...
Just worked at that for probably an hour constantly reheating. Just unsticking the adhesive from the back of the screen and the frame. I finally managed to be able to fit a card in through the bottom.
i.imgur.com/kuDuP
Then I just used that to unstick the rest of the adhesive.
Now, about why a lot of the frame has grinding marks. I have the Verizon GS3, but I broke the old screen. I found a water damaged sprint gs3 on craigslist for $100. so I figured I would see if it would fit, and if it didn't I could sell the screen for maybe 200-250 on ebay. It didn't fit, not perfectly... but I really didn't feel like waiting for it to sell. So instead, I made it fit, I almost got it perfect, and it all worked just perfectly when I had it all together. But I wanted it to fit perfectly, so naturally, on my last attempt, I ground down a little too far and nicked part of one of the ribbon cables. So I figured I'd try taking it apart without breaking it... If anybody has any suggestions on how to fix the ribbon, feel free to say something!
i.imgur.com/MN9Fl
how bad did you butcher the ribbon? you could maybe try circuitwriter conductive pen to draw the contacts back. http://stcwk.blogspot.com/2010/03/how-to-repair-broken-ribbon-cable.html
I got the S3 like 3 days ago, and earlier today it just slide out of my pocket when i was crouched, (I know, i placed an order on a case 2 days ago but thought i would be careful around the house with the phone til than) , Crack lower right corner, do you think you could seperate the glass/digitizer from the lcd screen? to just replace the glass/digitizer http://i46.tinypic.com/5lyx41.jpg
The pen might be worth a try. As for separating the glass from the screen, it's possible, but I really wouldn't recommend it. Just because of how the screen is manufactured, there is a film of glue between the front glass and the screen, it would be impossible to glue it back together without leaving bubbles in between, so it would look way worse than just the little bit of cracked screen you have.
Hi,
Hope somebody can help me. I purchased a second hand oneplus one of which the screen was broken. I purchased a replacement screen and replaced it without any issues. After powering it back up and starting to use it I noticed there was an horizontal band around the middle of the screen not picking up touches. I opened it again and tested the same without the cover (camera lens and flash) and it worked fine. When putting everything back and closing it, the problem reappears. I noticed from looking at the tear downs pictures I was missing a small plastic piece sitting to the right of the connector and above the ear piece. No idea what it's is purpose but it is missing. I've read that some users have grounding issues and maybe this missing piece is important to ensure the connector and flex don't touch other parts of the body.
Anybody knows what the function of this plastic piece is and where I can purchase one. All resellers I found don't sell this piece. Agreed it doesn't look like it could get faulty but in my case I or the previous owner lost it.
Thanks.
Just put some tape where the piece should be and you should be fine.
I have the exact same issue, but my plastic piece isn't missing. Did you manage to solve it?
Hi guys
Sadly I have a cracked display...so there are no spare parts available and the shops in Germany would like to have something around 500€.
I changed in the past some Sony-Displays and thought about doing myself. I found on aliexpress some U12+Displays.
Sadly I didnt found a single "manual" or how to, to do this right - anyone can help?
Best regards
Maybe these vids from JerryRigEverything can help you out.
Good luck!
Sent from my HTC U12+ using XDA Labs
https://tinyurl.com/htcu12
Just replaced mine
majomathes said:
Hi guys
Sadly I have a cracked display...so there are no spare parts available and the shops in Germany would like to have something around 500€.
I changed in the past some Sony-Displays and thought about doing myself. I found on aliexpress some U12+Displays.
Sadly I didnt found a single "manual" or how to, to do this right - anyone can help?
Best regards
Click to expand...
Click to collapse
I just replaced mine yesterday and it was more difficult than any other one I've done in the past. Anyway I never found one single video on YouTube that showed the screen removal and pretty much had to play it by ear. There are a few videos that show the disassembly of the U12+ and each stops before removing the screen. My advice is to remove everything from the frame, I managed to piece together enough from the videos to know there are 15 screws to remove, one video said 14 but there's one more that's hidden until you've gotten under the motherboard holding the front facing cameras. Knowing I wanted to keep it simple I didn't remove all of the antenna wires, there's one at the bottom that's under the speaker cover that I left attached so I only disconnected it from the motherboard. Then the other I only disconnected near the vibrator, leaving it connected at the motherboard, so each piece had one wire that stayed connected. Meanwhile you'll have to undo every other plug on the device and with a little persuasion everything fell out. (Don't attempt to remove the button/pressure sensing strips along the sides!) Once you are down to the frame, and for me the ear piece speaker, I used a heat gun to soften the bond between the glass and the frame. It doesn't loosen up very easily, they are really bonded together. I got most of it and then began to chip away at the broken glass. You'll want a good heat gun for this part. I had to set mine to 300F to really get it to loosen up and then work mm by mm around the edge getting all of the glass and glue out of the track. This probably took me a half hour or more. I used E6000 glue but only because I would have had to order B7000 or any other recommended glue. E6000 is a good glue but just because many of the other videos I watched used B7000 I would have liked to use it too.
To install the new screen I used a syringe filled with my glue to follow the small glue track around the edge of the frame. Don't worry about squeeze out because this glue is very forgiving and wipes away easily with IPA Alcohol and a rag. I followed the old glue placement, adding a little extra near the bottom corners and a dab around the ear piece speaker holes. Then it's just reversing the process to assemble the electronics. Now here is another word of warning, the plugs are so small and some are not easy to align but be sure they snap into place and are flat when installed. I made the mistake of not getting the display plug flat and had to do a partial disassembly to correct the issue.
I didn't glue the back on but think I might today just to try and achieve the waterproof level the phone shipped with. You may have to glue yours but I had previously broken the back and already replaced it and the replacement came with a double sided adhesive strip that was still pretty sticky. If I remember correctly the original back was glued on and probably wouldn't have stuck if I had tried to just replace the back as I did.
One other note. After being disassembled and pulling the battery my finger print scanner didn't want to work. In fact it didn't even show up in the menu when I went looking for it but restarting the phone again caused it to show up. My advantage with the double sided adhesive was I was able to test everything and use the phone for a full day before committing to gluing the back on. Now that I know everything is working, the phone is charging and it all seems good I can glue the back on.
Best of luck