Database Info

[APP][5.0.2][IR]LG QuickRemote for AOSP [1-13-15]

This zip installs the QuickRemote app and enables the IR blaster to work on AOSP Lollipop ROMs for the LG G3 (and G2). Not every device or rom has been tested, so flash at your own risk.
Credits go to @sefnap for the original G2 port, @RieGo for the original scripts, and @zzeneg for updating to the G3 versions.
WORKAROUND DETAILS:
The default SELinux policy for android was changed to enforcing mode in Lollipop to increase security. This restricts the functionality of some apps, so for QuickRemote to work we have to change the SELinux policy back to permissive mode until we have a better solution.
This zip installs an init.d script which runs at boot and sets the SELinux policy, as well as other permissions. It will also create the file /sdcard/QRemote.log, which records the SELinux policy at startup.
INSTRUCTIONS:
--Make a backup (or at least download the uninstall)
--Install the latest SuperSU (highly recommended)
--Wipe dalvik/cache (just in case)
--Flash zip in recovery (TWRP or PhilZ)
--Reboot--
--It may take a moment for device manufacturers to load, so be patient.
TROUBLESHOOTING:
First, make sure init.d is enabled:
-Check for /sdcard/QRemote.log. If the file isn't there, the init.d script did not run.
---Enable init.d support with this app
-If it still isn't working after enabling init.d and rebooting, verify that SELinux was set to permissive at boot in QRemote.log
---Try this app to set the SELinux policy instead.​If the QuickRemote app force closes when you open it:
-Make sure QuicksetSDK is installed. It won't be in the app drawer, so check Setting->Apps->All
-Clear QuicksetSDK data, delete /sdcard/Quickset Setup, reboot​
Thanks to everyone in this thread for helping figure this thing out!​

Working perfect on liquid smooth rom, thanks for posting this!

Thanks so much for posting this. Not being able to use Smart IR on AOSP has been killing me. I absolutely hate my LG TV remote. Will be testing on Beanstalk this evening.

confirm working for d855 on cm11... thanks

Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it

Thanks, it's work !
L10nH34Rt said:
Any chance of a working QuickCircle port for AOSP?
It's the only thing that's holding me back from installing CM11. I refuse to give up on this case since I paid so much money for it god damn it
Click to expand...
Click to collapse
I hope too. But I think on the G2 the quickwindow cover working on CM11 . Wait and see..

Quickset SDK has stopped.
Sent from my LG-D850 using XDA Free mobile app

Anyone tested this on CM12 yet?

if4ct0r said:
Anyone tested this on CM12 yet?
Click to expand...
Click to collapse
It isn't compatible with ART.

Joey43 said:
It isn't compatible with ART.
Click to expand...
Click to collapse
Sorry. I guess "- ART is supported" is a little misleading.

if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
I tried it on 5.0 and resulted in force closes and a broken app. Go ahead and download both files, if they work yippee, if not just flash the uninstall.

And let us know!
Sent from my LG-D851 using Tapatalk

if4ct0r said:
Sorry. I guess "- ART is supported" is a little misleading.
Click to expand...
Click to collapse
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.

dictionary said:
KitKat Art, and Lollipop Art, are two different creatures. I'd think that a port of the Lollipop version of this remote from the g3 leaks should work.
Click to expand...
Click to collapse
Well, if it wouldn't, it wouldn't be a port, am I right?
I tried flashing it on Lollipop and using a different remote App and that didn't work either, even though the App recognized that the G3 has an IR-Blaster.

Guys, if you use a custom rom like CM12, you can make the flashable zip to work by doing the following.
First flash it normally, then grab from XDA the LGs lollipop version of QuicksetSDK, I think there should be a lollipop version, but I copied it from Android HD rom. Then replace the KitKat version with lollipop in in the System/app folder, set the correct permissions and voila it works. I have tested it on my Sony TV, it works like a charm. Good thing is that Smart Remote IR also works if interested to try.

Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/?bbfbfefbnj7bj7k
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.

Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
Thanks mannnnnn. Now when it works I'll be happy. I wonder if it'll have a widget for pulldown
Sent from my LG-D851 using Tapatalk
---------- Post added at 12:57 AM ---------- Previous post was at 12:54 AM ----------
I wonder if the quick circle stuff can be added to cm
Sent from my LG-D851 using Tapatalk

Xerionius said:
Here's the Quickremote zip with the updated QuicksetSDK (For CM12!):
http://www.mediafire.com/download/bb...moteG3CM12.zip
I hope you don't mind me uploading this here @zzeneg, all credits are going to you! If you want me to, I'll take it offline immediately.
I think it should work on any 5.0 AOSP-Rom.
For some reason my IR-Blaster isn't working, the app launches, but the IR-Blaster just doesn't work.
Click to expand...
Click to collapse
link down?

rickriego said:
link down?
Click to expand...
Click to collapse
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k

Xerionius said:
This is weird, the file wasn't down but the link changed.
I updated it, here's the new one: http://www.mediafire.com/?bbfbfefbnj7bj7k
Click to expand...
Click to collapse
Getting a 38 kb file that won't flash? Tried downloading three times

RiverROM Gone......

Thanks for support guy's

3MinitBattery 4G Icon Changed LTE V1
https://mega.nz/#!eY1V1S7K!lm7T_aRC6pFwRYf2UxpdHjN0miesphL-z_orE86yOTM
Systemui 4G Icon Changed LTE
http://forum.xda-developers.com/showpost.php?p=63511617&postcount=20
Kernel Synapse full support from @Pafcholini
Link:https://mega.nz/#!ec13XLbD!Dbof6xBxykklgRS4eLfo-4RlfVhY5n4p9VG4yizhvsA
3MinitBattery Mod
Link:https://mega.nz/#!vFlnFaxQ!000Mn0WE283FVbG9yG3jiK9qbJqnrYmXQfl0NTyrKX8
Xposed
Link:http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Viper4Android Fx
Link:

Can't wait to flash this.

Firmware 5.0.1 BOD7 PLEASE LİNK (MEGAUPLOAD OR VERYFAST )

I flashed the files younhad on the other thread last night. I love what you put together here. Great work bro!

Beta online....

Features sounds exciting. ... any screenshots of this rom?
Sent from my SM-N915T3 using XDA Free mobile app

Edge Screen working with this?
---------- Post added at 08:35 PM ---------- Previous post was at 08:34 PM ----------
Downloading to flash now....cant wait

This is fantastic...I love it...the only thing that I cant do is get themes like in the port. I need that Note 5 theme store

Before I wipe, is the edge panel included in this version?

shadezero said:
Before I wipe, is the edge panel included in this version?
Click to expand...
Click to collapse
Yep
Sent from my SM-N915T using Tapatalk

jmichaels1982 said:
Yep
Sent from my SM-N915T using Tapatalk
Click to expand...
Click to collapse
Confirmed. Thank you!
Have you tried installing XPOSED yet?
Not sure which to pick, ARM64 or regular.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960

shadezero said:
Confirmed. Thank you!
Have you tried installing XPOSED yet?
Not sure which to pick, ARM64 or regular.
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Click to expand...
Click to collapse
Regular and working fine here

Airtioteclint said:
Regular and working fine here
Click to expand...
Click to collapse
Awesome, so download:
XPOSED Installer from Link: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Install it.
Go to TWRP/CWM and Flash: xposed-v75.6-sdk22-arm-custom-build-by-wanam-20151026.zip
-Correct?

shadezero said:
Awesome, so download:
XPOSED Installer from Link: http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Install it.
Go to TWRP/CWM and Flash: xposed-v75.6-sdk22-arm-custom-build-by-wanam-20151026.zip
-Correct?
Click to expand...
Click to collapse
Yup. :good:

Awesome to see that everyone is having success with the rom making me so excited about it coming to sprint.

Airtioteclint said:
Yup. :good:
Click to expand...
Click to collapse
Awesome! Thank you.
Confirmed working here as well.
This ROM is working superb.
Only real missing feature for TMO is wifi calling/texting.

Yes tmo wifi calling, volte need to fix and need to change some builp.prop code..
ı dont have tmobile phone , We work together @wcoast and @jmichaels1982 thank you...
All errors will be corrected next time...
i try to theme center from note 5 i edited framework and services.jar...
theme center works download theme %100 apply theme %40 then phonee bootloop i think some app blocked i dont know ...
shadezero said:
Awesome! Thank you.
Confirmed working here as well.
This ROM is working superb.
Only real missing feature for TMO is wifi calling/texting.
Click to expand...
Click to collapse

I have EVERYTHING working! Loving it very much.. the only thing I found is Not to put to many apps in the S-Pen Launcher or you cant uninstall them. The settings button didnt work and I cant get the theme store so I added it from EchoeRom. It shows up now but the themes wont sync. So now on the botton of the Home Pages it shows Themes are there. I have 4 of theme but cant install them or get the theme app/apk to sync with this Store Version I guess. I loaded it and set the permissions in a folder I made in the systems apps and in priv/apps. If anyone can get themes PLEASE let me know. Thats ALL I need and Im 100%

Systemui 4G Icon Changed LTE
Flash TWRP
V1 Link : https://mega.nz/#!GUlHyJAY!zBBfr1WNvsJx8Ig-aGXwwrofThMq_J3EIsnEqGN5cWg
V2 Link : https://mega.nz/#!bI92FY6a!ctjUX6Vb5WasSGBD9BLZbU26Ez5khcYJYHbl7m7PWik

Xposed conflict with camera mods in MM

After lots of tries i found there is a problem between Xposed and All other camera mods for our Z3 (i have no info about other phones like Z2). So we cant use Xposed + Pexocam or Cyberian or... in Marshmallow (there is no problem with LP!) and it gives u something like this message: "Camera is in use by another application, please close other apps..."
(Note i tested with both .575 and .570)
Anyone has a workaround or has both Xposed and camera mod without problem??

agent.47 said:
After lots of tries i found there is a problem between Xposed and All other camera mods for our Z3 (i have no info about other phones like Z2). So we cant use Xposed + Pexocam or Cyberian or... in Marshmallow (there is no problem with LP!) and it gives u something like this message: "Camera is in use by another application, please close other apps..."
(Note i tested with both .575 and .570)
Anyone has a workaround or has both Xposed and camera mod without problem??
Click to expand...
Click to collapse
I have xposed v85 and have used both of those mods. Likely it's a module than xposed as a whole as I have no trouble.
Have you confirmed it works without xposed installed? Maybe it's another mod?

Dobsgw said:
I have xposed v85 and have used both of those mods. Likely it's a module than xposed as a whole as I have no trouble.
Have you confirmed it works without xposed installed? Maybe it's another mod?
Click to expand...
Click to collapse
Yeah I confirm its Xposed, Without it everything works fine
I just had gravity box on xposed but i cleared its data so that must be a xposed problem

I confirm again
Tried once again with just xposed installed (all modules except greenify - which is inactive- were uninstalled) and camera mods not working.
I dont know how this could happen since you have both xposed and camera mods!
I did this:
flashed rom --> flashed Pexocam v8 --> Everything working fine --> Flashed latest Xposed --> Pexocam not working!!!

agent.47 said:
I confirm again
Tried once again with just xposed installed (all modules except greenify - which is inactive- were uninstalled) and camera mods not working.
I dont know how this could happen since you have both xposed and camera mods!
I did this:
flashed rom --> flashed Pexocam v8 --> Everything working fine --> Flashed latest Xposed --> Pexocam not working!!!
Click to expand...
Click to collapse
Flash xposed first.
I always flash ROM, Xposed, then mods.
Tbh it shouldn't make much difference but something to try.
I'm on MWA 5.0.0 by Pandemic.
If you use custom ROM perhaps something has been edited that the camera required to function?
There's a lot of variables here :/
Could try another ROM with xposed and camera mod and see if it works?
Troubleshooting is gonna suck on this one as it works for some and not others.

Well i tested flashing xposed then camera, makes no difference
I use stock pre-rooted .575, it mustn't be problem because i had that problem with .570 too but there wasn't any problem with LP roms with same xposed version!
I saw some other people had this problem, i used almost all of their solution like clearing data and cache, completely removing camera then installing new mod, etc, but non of them works. That's a xposed problem and idk what's wrong!
Note that I'm using D6633 variant

agent.47 said:
Well i tested flashing xposed then camera, makes no difference
I use stock pre-rooted .575, it mustn't be problem because i had that problem with .570 too but there wasn't any problem with LP roms with same xposed version!
I saw some other people had this problem, i used almost all of their solution like clearing data and cache, completely removing camera then installing new mod, etc, but non of them works. That's a xposed problem and idk what's wrong!
Note that I'm using D6633 variant
Click to expand...
Click to collapse
Its "not" an xposed problem, its quite easy to blaim xposed but i use it a long time and totally no issues with it, maybe is it just the camera mod or duplicated lines in the end of your build.prop !

Pandemic said:
Its "not" an xposed problem, its quite easy to blaim xposed but i use it a long time and totally no issues with it, maybe is it just the camera mod or duplicated lines in the end of your build.prop !
Click to expand...
Click to collapse
I use xposed for a long time too and I never had any issues with it - thanks to its creator - but whenever i uninstall xposed, camera mods work well. Idk if there is any problem with build.prop but it mustn't be camera mod problem since many users installed it successfully.

Do you have superuser mod?
Are you using the versión of MM?
latest versión?
Logs?

panchuckles said:
Do you have superuser mod?
Are you using the versión of MM?
latest versión?
Logs?
Click to expand...
Click to collapse
1. I had Rajeev's Superusermod for cyberian camera III since it was needed but for PexoCam i didn't flash it.
2. I use MM version
3. Everything is at latest version
4. No logs

Hello, sorry that I've dug out an old post. But yes, my Xposed is also conflicting with camera mods (both Cyberian & Pexocam). Camera mods worked when Xposed framework was not installed but once installed, crashed.
Have you found any workaround?
On stock pre-rooted .575 (D6653) as well.
Thanks!

I haven't found any workaround yet
Maybe professionals could help us if they see this thread

[Guide] Viper4Android on Nougat/Oreo [TW & AOSP]

V4A on Nougat/Oreo
Before starting:
-Make sure you have TWRP!
-Viper4android doesn't seem to work on certain roms, but there should be no problem with the more popular ones and it also works on all AOSP roms.
-Always have a nandroid backup, in case something goes wrong or you just want to uninstall viper4android!
How to install?
1. Download audio_effects.conf file and with a root explorer replace the one in /system/etc
2. Uninstall or Freeze "Sound Alive" (for AOSP "MusicFX") with Titanium Backup.
3. If you have magisk, flash Viper4Android Magisk in recovery. For supersu use regular Viper4Android zip.
(When it asks to install the driver, then just wait.
If seems to be frozen just don't touch it and let it do it's job.)
Enjoy!

thanks. works as it sounds
- tapatalked - from my VANTABLACK S7 EDGE

You're welcome

Hi Guys,
I've tried everything and can't get the driver to load under N.
Driver shows up as "abnormal" after a reboot.
I'm using on the edge 5 rom, I was on 3/4 before and was having the same issues.
Any pointers would be awesome.

nate911 said:
Hi Guys,
I've tried everything and can't get the driver to load under N.
Driver shows up as "abnormal" after a reboot.
I'm using on the edge 5 rom, I was on 3/4 before and was having the same issues.
Any pointers would be awesome.
Click to expand...
Click to collapse
Had the same issue then I just flashed these two zips with twrp and all works fine.
http://forum.xda-developers.com/showthread.php?p=69618189
Sent from my SM-G935F using Tapatalk

seth2006 - Thank you!!! All working now, I've been pulling my hair out for the last 2 days

*Updated the guide*

Great tutorial thank you

TheSproker said:
*Updated the guide*
Click to expand...
Click to collapse
Is there any way to get arise sound system work in nougat??

Aakash Kaushal said:
Is there any way to get arise sound system work in nougat??
Click to expand...
Click to collapse
I personally haven't used arise on my s7, but I believe the procedure should be the same ( edit audioeffects.conf, freeze sound alive etc.)

TheSproker said:
I personally haven't used arise on my s7, but I believe the procedure should be the same ( edit audioeffects.conf, freeze sound alive etc.)
Click to expand...
Click to collapse
Holy s**t it works..thank you bro

Aakash Kaushal said:
Holy s**t it works..thank you bro
Click to expand...
Click to collapse
No problem

Been looking for this since yesterday. Thanks works as expected.
Sent from my SM-G935F using XDA-Developers mobile app

Works perfectly - Thank you,

Whats the install procedure on marshmallow ?

jassu said:
Whats the install procedure on marshmallow ?
Click to expand...
Click to collapse
If you don't have Sound Alive on your rom then just flashing the Viper4android zip should do the trick.
But if you have the annoying Sound Alive, then the procedure is exactly the same, but then flash this zip.

Works very Good on the second nougat beta !!! Thanks!

Thank you, works like a charm. Loving it !!
S7 Edge Nougat Beta

Does this mod/guide also work on mm roms ?

Kyuuri27 said:
Does this mod/guide also work on mm roms ?
Click to expand...
Click to collapse
Yes, but instead install this apk.

Xposed Working Modules [OP3]

Since early release from PurifyOS Team of working Xposed Framework (https://forum.xda-developers.com/xposed/xposed-android-nougat-sdk-25-arm64-t3639221).
All credits to them
I have decided to share working modules in OP3.
For me at this point i have working:
- MinMinGuard
- YouTube Adaway
- Statusbar download progress
- Native Clipboard
- YouTube background playback
- Fingerprint enabler
- Amplify as system app (system/priv-app)
- GravityBox
- Xposed One Tap Video Download
OP3 Open 20.
Share yours...

xui mods works but crash some apps
Gboard nsfw working fine

Also Xinsta module for Instagram works fine.

Flat Style Bars Indicators works fine

Has Anyone tried Snapprefs?
Sent from my OnePlus3 using XDA Labs

Powernap working, greenify didn't work
Sent from my ONEPLUS A3003 using Tapatalk

Fingerprint enabler works too

Does gravitybox or some similar app work, especially for ROMs like PA ?

Anyone facing issue with nav keys not responding....

jocaboss said:
I have decided to share working modules in OP3.
For me at this point i have working:
- MinMinGuard
- YouTube Adaway
- Statusbar download progress
- Native Clipboard
Share yours...
Click to expand...
Click to collapse
Have you tried Gravity Box in stock ROM?

Normas Interruptor said:
Have you tried Gravity Box in stock ROM?
Click to expand...
Click to collapse
Not yet man

jocaboss said:
Not yet man
Click to expand...
Click to collapse
Mainly i missed GB module... ?

Any one try xstana and xbattery themer

does it work on resurrection remix ??

HowGiveLolli is working too.

​
Prattham said:
Has Anyone tried Snapprefs?
Sent from my OnePlus3 using XDA Labs
Click to expand...
Click to collapse
Tried it and snapchat keeps crashing ones you activate it..

REiced said:
​
Tried it and snapchat keeps crashing ones you activate it..
Click to expand...
Click to collapse
Last version of snapchat that was supported: SC 9.39.5.0 anything newer might not work

liam_davenport said:
Last version of snapchat that was supported: SC 9.39.5.0 anything newer might not work
Click to expand...
Click to collapse
That's the one I'm using, also tried to roll back to 9.21.1.0 with sp 165 and no yoy..
Edit: tried both oos beta 20 and experienceos

Guys share the rom you are running when you update the list of modules working. Thank you.

ajithms said:
Guys share the rom you are running when you update the list of modules working. Thank you.
Click to expand...
Click to collapse
OP updated... Thanks