Hi
I have a had bricked HTC One S I i was flashing recovery when all went wrong) The phone will not turn on at all and is only recognized in windows as QHSUSB_DLOAD. So i saw the thread on using linux to recover bricked phones http://forum.xda-developers.com/showthread.php?t=1990043&highlight=device
The problem i have is i can find the device ID ok and issue the command to recover but when the command resets the phone it comes back with a different device id the same bus but the old ID plus one
Any body out there any ideas
Thanks
Related
so i Bricked my phone because i did the wrong hard SPL.
now my phone is bricked its not turning on and its not working at all.
cant connect it to the Active sync!
now the pc recognize the phone as Qualcomm cdma Technologies MSM
and it searching for the Drivers.
now i found out that the drivers the create a communication between the phone and active sync is WpdRapid2.dll and i cant find it anywhere can someone pls help me?!?!!?.
I tried Hard Reset
I Tried Volume +/- with power
nothing works
if i can get the driver then I can create the connection
thanks for the help!
I'm definitely not the authority on this being that I just jumped ship from an Android device, but I'm pretty sure if you've flashed the wrong SPL your time is probably best spent on the phone with Asurion.
thanks for the reply
what is asuron?
There is no fix for you phone. Hopefully you have insurance and can get a new one. If you put the wrong spl on it is nothing but a good looking brick.
Hello,
I managed to brick my new Feiteng H7100 phone, i flashed wrong rom to it and got a greenish screen when trying to start the phone.
So i formatted the phone in SPFT tool "Format whole flash" and from then it stopped responding, i cant start the phone anymore, and the charging indicator wont light up when charging.
When connecting the phone to try and reflash it the computer recognizes that i have connected the phone to the computer, but flashing doesnt work.
It is the S7180 with 1GB ram.
I hope there is a solution to it and it can be fixed, iam not sure if this can be called had brick or soft brick.
Was very close to throw it out of the window yesterday, but then thought i can give it a chance
Thanks
Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks
Mine is dead also
jemmars said:
Have you found a solution to the problem? I have a similar problem. Dead after flash ROM
please help me
Thanks
Click to expand...
Click to collapse
Same mine is completely dead after I flash it - Its not recognized by the originally drivers in windows 7. Showing up as an Unknown Device.
if it is showing up as an device, it isn`t bricked. you need to get the right firmware and flash it again. force install the drivers for the unknown device or take the drivers for Rom you flashed. (e.g. flashed wrong preloader from ZTE to a Star device, need to install ZTE drivers)
While I don't know the specifics of the Feiteng H7100, I've "bricked" many an android phone and tablet. Fortunately it's usually easy to fix.
1) Reboot the device into CWM Recovery Mode (usually by holding power and volume buttons at the same time)
2) Plug it into your computer & run "adb devices" - if you device comes up as a Recovery device, then you're probably home free
3) Run an "adb push newly_downloaded_cyanogenmod_rom.zip /sdcard/" - the data location (/sdcard/ in this example) might vary depending on your device
4) Wipe Cache
5) Install Zip from sdcard and choose your new_rom.zip
Hi
I have a had bricked HTC One S I i was flashing recovery when all went wrong) The phone will not turn on at all and is only recognized in windows as QHSUSB_DLOAD. So i saw the thread on using linux to recover bricked phones http://forum.xda-developers.com/showthread.php?t=1990043&highlight=device
The problem i have is i can find the device ID ok and issue the command to recover but when the command resets the phone it comes back with a different device id the same bus but the old ID plus one
Any body out there any ideas
Thanks
Unfortunately that's a hard brick. Look for a jtag service is the only hope.
Sent from my HTC One S using XDA Free mobile app
Since Xiaomi and Micro$oft released a public ROM of Windows 10 Mobile for Mi4, the curiosity drives me to try it. But I felt so uncomfortable after successfully installed win10 on my mi4.
So I decided go back to Android roms. But sh*t happened - my mi4 got bricked during the flashing.
Phone won't boot with black screen and no boot options. Holding any buttons (including power button + volume down more than 2 minutes) won't work.
The pc can not recognize a USB device after it is plugged in (in both Windows XP and Windows 8.1).
Then I plug it into my Mac OS X with a VirtualBox of Windows 7 OS inside.
The USB devices shows a unknown device of id 05C6:F006.
I did a lot of googling of 05c6:f006 which seems to be 05c6:9008 and something Qualcomm related.
And the most important thing is to make my computer to recognize it.
So things I need to figure out:
Is my phone hardware damaged or software damaged (hard bricked or soft bricked)?
Do I need to disassemble it?
How can I make my pc to recognize it ?
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
My phone was recognized as a USB input device, VID_05C6&PID_F006, seems to be Qualcomm_QHSUSB 9008 related
I have exacly the same probleme here, do you have find any solution ?
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
xiaomi mi4 lte not turn on
darkmaster566 said:
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
Click to expand...
Click to collapse
Good evening. I have a problem with my Xiaomi 4 lte, after trying to return from 6 to android 4.4 android after this tutorial : ]Now the phone does not start, if you stick to connect to PC loaded or red LED flashes once and the computer sounds like something I plugged in but not afiseaja nimicc device. He is charged for 24 hours and not start and MIFLASH program is not found
Mi4w hard brick
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
Hey! I had bymistakely flashed wrong partition and tried flash in miii 6.3.3 ROM....
Now my device is bricked....Whenever i connect to charger the red light blinks....And when connected to pc....The red light comes.....But no drivers come on my pc...Means its to recognising.....Can you help me please????
Hello.
I know, that there are many posts about bricked LG-D331 devices and I want to apologize first for posting another topic for a bricked one, but I tried many solutions and really nothing worked so far.
The problem is, that the device shows nothing on the screen when i try to start it, but as soon, as I plug in the USB-cable the Windows Device Manager shows "USB Serial Device (COM11)" and disappears after a second, or two.
Is there any way to boot the phone and flash it again? Is there any test point or can I flash it with a particular software or repair box?
What would you suggest?
Thank you for your answers.
Kind regards!