Related
probably, i dowgrade my kaiser with lower version...(everything passed(unlock,flash)without problem and error...
after flash phone dead... nothing happen when try to power on,reset,boot,anything...try,almost 4 hour, everything what can find here, but still no luck...
no power, no bootloader, even i can't do anything with mtty couse i run Vista, and have prob to stop activesync working... everything what i got is
ZTE diagnosstics interface 6000 cdma 1x(com5)
zte nmea device cdma 1x (com6)
in my control panel/device manager,
that talking maybe phone is not totaly damage...
anyone help, any idea...this will be long long night...
I'm not sure what you mean exactly but I also had a dead Kaiser. It did not happen after flashing but my phone suddenly turned off and could never be turned on again. I first thought it was a battery issue but no.
Finally I returned it to HTC and they replaced the motherboard under warranty.
yes but my kaiser is not in warranty, customer buy it in Italy... and I kill him, sad but true...
well i might not be correct, bu it looks like you wiped the nand on the phone... i think if you look up the steps in the frankenkaiser thread it should help you out
but i can't go in bootloader mode....
if you look you dont have to enter bootloader mode..: http://forum.xda-developers.com/showthread.php?t=394584
ok, first , from now i'm on XP...
but always same... when attach in any button combination to the pc, it was always see the same, look on the pic
and in MTTY, i have the port from 1 to 10 &usb. on usb cannot connect, with the error "usb port can not open"
btw forgot to write, device is brand new, no hw damage
i make connection between kaiser and MTTY, over diagnostics port, but when try to type command(or Enter) nothing happens. how to use MTTY
as i see my kaiser stuck in download mode... (see in QPST & QMAT)... how to flash it or to restore it to normal mode(phone no power on, no going to boot mode)... i read emi&sbi, if it can help some...
if you look here from step 3 down i think this should walk you thru the process... http://forum.xda-developers.com/showthread.php?t=393337
if you look at the part right below step 2 it says to lower your com port for the diagnostic interface below 10, i think i saw that yours is set to 53...
i try on 3 differnet pc. try all comm port. mtty is my problem(one of them). when run mmty(choose connection base on diagnostic port), i can type anything, any command, enter,etc... nothing on screen, nothing happen after enter...
can someone explane how to flash kaiser via jtag...
someone who allready do it...
or send me to pm
Sorry no idea!
Hi mobilend,
i just saw your message... no idea about that!
Don't know if anybody already traced the testpoints.
You also would need some software tools to access the MSM chip.
Maybe i'm wrong but i read some threads about this kind of brick and maybe your able to recover without JTAG.
Perhaps the kaiser cracks could help you out
Regards,
scholbert
i do nothing since today...
if somebody have idea how to unbrick kaiser with jtag, write here or i may send device to him...
Problem
Hi excuse you have succeeded there?
I have yours same problem.
This is my fear, for this reason I have not had the courage to update my ROM.
I do not understand, the videos appear to be so simple, but at the same time, to read topics like these, I am in panic ...
Will I still be aware and courageous enough to update my ROM?
jonastamborin said:
This is my fear, for this reason I have not had the courage to update my ROM.
I do not understand, the videos appear to be so simple, but at the same time, to read topics like these, I am in panic ...
Will I still be aware and courageous enough to update my ROM?
Click to expand...
Click to collapse
Most of the problems come from not reading the information...
If you look at the number of users on here that have managed to upgrade their phone you will see that it way outways the number of people who have truly bricked thier phone. (A lot of the people who have upgraded thier phone have little knowledge about what unlocking means as well, so don't worry if it's a bit overwelming).
If you want to get started click "KAIS: Getting started" in my sig for a step by step guide by mskip. mskip, myself and some other members will help out with any questions you post in that thread. Also check out the info on the HTC Kaiser wiki page on the xda-developers wiki page.
Ta
Dave
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
I think you have been bricked your device...
dineshkumaar said:
Hi...
I was trying to Upgrade my O2 XDA Exec Rom with Windows Mobile 6.5 by explode. The process went successfully till 99% and after that it ended up with Error. Then I unplugged my pda from the pc and tried to restart the device. I was surprised that the device did not respond to any of the following
Soft Reset
Hard Rest
Boot Loader mode Start (Bulb + Power + Reset)
It is totally blank screen whatever you do.
When I connected the device to the pc with usb cable, a Red Light is shown for 2 seconds and then goes off and a message comes up on the pc that "USB DEVICE NOT RECOGNIZED".
Then I tried to Remove battery from the device for a whole night and the next day morning i did all the above procedures again to get no results.
Kindly Help me out
Thanks
Dinesh Kumaar
Click to expand...
Click to collapse
if it's not recognized, remove the SIM card, the SD card, and on the PC open activesync and disable usb connections. for more info open this link
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
what if the device is bricked
Thanks for your quick reply
Kindly let me know what could be done with the bricked device. Can it be repaired again.
Thanks again
Dinesh Kumaar
dineshkumaar said:
Thanks for your quick reply
Kindly let me know what could be done with the bricked device. Can it be repaired again.
Thanks again
Dinesh Kumaar
Click to expand...
Click to collapse
you have to find another rom and try to flash it to your PDA.
ARE YOU RUNNING windows XP on your PC?
Yes ! I have Windows XP SP2 and Active Sync Version 4.5.0 (Build 5096)
Thanks
dineshkumaar said:
Yes ! I have Windows XP SP2 and Active Sync Version 4.5.0 (Build 5096)
Thanks
Click to expand...
Click to collapse
have you tried to upgrade another ROM, and if you did, is your PDA now working?
I cannot update my rom as my pc cannot recognize my device. is there any other way to update rom?
dineshkumaar said:
I cannot update my rom as my pc cannot recognize my device. is there any other way to update rom?
Click to expand...
Click to collapse
Have you read here?
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Try to reflash with another ROM
Hope it helped
And don´t forget to vote!
I had already done those steps to get no results.
its my badluck.
If you cannot get into bootloader and you have done the steps above, then you cannot flash to another rom.......it would seem you now have a paperweight im afraid
I am still not able to revive my device. I know that it is just due to corrupt bootloader but don't know how to repair it.
If anybody ever has solution for this... kindly let me know.
Regards
Have you tested mtty?
I would recommend to PM a chef on Universal forum
Good luck,
Mtty is not detecting my device
it says can't open usb port
One More thing I have noted is that when I keep the device connected with the pc, at a certain interval of about 10-15 mintues my device's Led shows RED Light for few seconds and then turns off followed by the the "USB device not recognized" on my pc.
I hope this can be used as a hint towards reviving my device.
Regards
have you followed orbs advise above and pm a chef on that section, they maybe able to help. From my knowledge (limited on that device) i ddont think there is any recovery proceedure that you have not tried. Have u downloaded offical wm5 rom and tried it. I know and appreciate that it will probably not work due to corrupt bootloader, but what else is there to do??
To understand more, what did you do PRIOR to trying to flash to 6.5.
Did you hardspl correctly? Had you already flashed to another rom and just felt like flashing to another new rom?? Give us more detail.
Thanks for your reply
I dont know how to PM Chef.
I had used 3 other Rom versions of WM6.1 on my device. They ran very much fine on my device. But When i found WM6.5 xplode, I wished to try that too. But the rom update procedure went successfully till 99% and after that it showed an error that upgrade was not successfull. I pulled out the device and tried to restart if by all methods but I wasnt able to power on at all.
Thanks
Regards
ok, goto the thread that you got the rom off, click the chefs name and you will get a menu there to send pm, do it, he might have seen a similar problem or know how to correct bootloader.
good luck
noup really no...
Is bricked
my bro has bricked an Universal and the same led turns red no power off no bootloar no power it means the flash chip is dead!
Sorry to heard that.
He waits too long for the upgrade it tooks at least 40 minutes
then ERROR... but you know... the batt was died in middle process ( th batt was ****ed up, it say full charged but no! it was on 60 or 50%) then the stupid thing is make a hardreset.. i told him dont hR your device... justa simple reste and reinit the process... and huh! its bricked.
if you are interested on sell your parts
maybe my bro want some parts.
my advice(similar to other people):
1. Charge your batery somehow (in other device or anything else)
2. put your devce in bootloader mode and connect it to pc - it wll be detected like microsoft usb sync
3. use mtty try difrend versions becuse sometimes 1.42 does not detect it properly - read here for what to do with mtty
IMO this may be battery problem or nand chip problem - in both cases it is hardware fail
i cant believe i did this but i have a sprint tp2 and i accidentally install the wrong rom, i installed 1.8b_Sense_2.5_2012_Full, and after the update the phone wont turn on so i cant even do the bootloader. and hard reset either, nothing is responding. is there any way i can get out of this with a working phone?? would the people at sprint be able to help? and please no smart ass comments im really bummed out about this right now
It should be ok if you only install a gsm rom. If you installed a gsm unlocker than it is bricked. Just push the bootloader buttons with the phone off. If it doesn't go to bootloader it is bricked.
i installed the rom but i think the damn thing CAME with the radio unlocker inside the rom. i cant get into bootloader...
please help
If you can't get into bootloader and it wont turn on it is bricked.
Not to hijack the thread, but on the subject of bricking the phone...
I tried to install Hard SPL using SSPL Manual (downloaded from a link on ppcgeeks.com). I ran it from the phone, and the screen blanked as normal, but no USB device was detected after doing so and the manual Hard SPL would not work either.
I tried to reset and remove the battery. The phone will not turn on, will not enter boot loader mode, nothing! EXCEPT for one thing, when I plug in USB now, it is detected as a Qualcomm CDMA Technologies MSM. No driver though (Win 7 or Win XP).
Is there any way to recover from this?
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
ted2001 said:
Hi!
Download and install this:
_ftp://up.ppcgeeks.com/Touch%20Pro%202/Stock%20ROMs/RUU_Rhodium_W_Sprint_WWE_1.21.651.3_RS_1.96WF_NV_SPCS_1.42_0430_PRL60652_Ship.exe
I think it help you.
Click to expand...
Click to collapse
Hi, I have the exact same issue as the member above. I tryed to go to the ftp site you reccomended, but can't download. Can you please help! I cant sleep or think of anything else. Can't believe I did that to my phone.
go here and then to touch pro 2 stock roms. ftp://up.ppcgeeks.com/
Thanks for the replies.
I can't load the stock ROM since the phone is not recognized by ActiveSync. While you can see it when you connect USB, it isn't actually usuable as there is no driver loaded for it. And many drivers I've tried for it do not work either.
I did try [to install the ROM] though just to make sure there was no magic going on behind the scenes, but no go.
EDIT: Grammer fix
After countless of weeks trying to figure out what's wrong and how to fix it, I might as well ask help from the masters,
I bought this phone in a non-working condition and was only told it just needed charging.
Here's what I know about it so far:
Z560e
PJ40200
so it's an S3
the phone does not boot up
I cannot get into hboot
the phone shows an amber light when connected to a power source, so I'm assuming it's charging.
sometimes gets detected by the computer as qhsusb_dload but I can't seem to reproduce the condition that it does get detected.
I have taken the phone apart, connected it without the battery to see if qhsusb_dload is detected to no avail
I don't know how it got into this situation and haven't tried any of the methods to fix this as it might worsten the situation.
i have tried to get this checked by a local shop to get it jtagged but he failed and I'm not entirely sure if he put any effort it
I wanna know what's wrong with it and if or how I can fix it?
Any help would be greatly appreciated :highfive:
Is the mode displayed qhusb or qhusb_dload on PC?
it's displayed as qhsusb_dload.
what are the differences exactly? Just so I'd know so I could help out others.
Qhusb is totally bricked and can only be repaired with jtag. Normally qhusb happens by flashing wrong hoot, or recovery etc.
Qhusb_dload can be repaired with PC. Most of the time.
Did you used unlimited.io tool?
Ps I live in Germany, so I won't respond anymore today. Too late here .
wew, well that's a relief. :cyclops:
I haven't yet but I'll try unlimited.io's solution, see if that fixes it.
thanx for your time, it's 5am where I'm from right now and I'll keep working on this till i pass out. :victory:
update: tried unlimited.io's QHSUSB_DLOAD fix but to no avail either, any other suggestions?
No no. Don't try it . Oh damn... Now it's definitely bricked...
I asked if you used it not tried to use it.
Don't wanted you to use it.
hm.. so, what do I do now?
Replied on pm
ok.. so just charge it until Monday?
Yes
@tecardo
my one s s3 too is also bricked like agili, i tried to update to jellybean via OTA and the phone suddenly shutsdown. and now it is bricked. pls help me thanks
Still report back on Monday.
alright, monday is here. what's next?
I would need one of your One S. The reason i had you wait: The battery discharges in this state. If it's empty it's hard to repair.
So someone of you needs to check this: Run a RUU. When Phone is connected.
i ran the ruu, i get an error 170?
so uh, where do i send the phone?
also, would you like me remove the battery so it doesn't discharge on the way there? ill also have it disassembled to save you the trouble
same here tecardo, pls also tell me where i will send my phone im kinda desperate. thanks.
I only need 1 device to look if I can fix it
Strangest "Bricked" Oneplus One: No recovery, locked OS, can't unlock bootloader
Hi there, I've come in to the possession of the most stubbornly bricked phone that I've ever seen . Bought a OPO off Craigslist, someone cracked the screen and sold it for cheap instead of fixing it. It had been remote wiped but still has some strange difficult software. Posted this problem to the Oneplus Forum but have had no response, thought XDA would be more qualified!
From what I can tell it's a Oneplus One that was sold through a re-seller that replaced all the software on the phone with a high-security version of Android. It's called EncroChat and from their website (encrochat.network or encrochatsure.com) it looks like it removes the recovery from the phone and replaces it with an EncroChat OS (some kind of Cyanogen) that you can boot to in addition to the Android OS.
Well I assume during the remote wipe something went wrong with the software and the phone no longer really functions. It boots up fine but can't connect to Wifi, cellular, not detected when connected to my PC, and has no real apps to speak of. I think most of the device's drivers are missing. Trying to boot to recovery instead boots to their EncroChat OS which is locked behind a password that neither I nor the person I bought it from knows.
I can get to fastboot and my PC will detect the phone then but running the bootloader unlock command doesn't work, the phone just reboots into the locked EncroChat OS. My idea now is to try and hardbrick the phone and then re-do everything on the phone over again, but I can't figure out how to do that. Does anyone else have any ideas?
Contacting EncroChat
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
evronetwork said:
Had one GOOD soft brick in the past, I've used coloros rom(from the Chinese OnePlus One) and fix my phone ...it deleted all media of course but manage to unbrick the phone. Don't ask me how to, it's been a while, google it
It would fix even the most stubborn soft bricks you'll see. Before that I tried everything that was available at the time, no boot as well only fastboot(not even recovery)
Click to expand...
Click to collapse
broccolicakes said:
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
Click to expand...
Click to collapse
For your phone to be recognized in your PC as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008, you need to install proper drivers. follow this guide
http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
let me know, if I can help you furthermore.
broccolicakes said:
Tried contacting EncroChat via email form, twitter, and reddit. No luck! Still stuck with this. I want to try this unbrick guide: http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732 for hardbricks but I can't get my phone to show as QHSUSB_BULK or Qualcomm HS-USB QDLoader 9008. Any idea how I can do that? This guy seems to have done it:
Click to expand...
Click to collapse
Hello dude,
While it was quite some time when I did this unbrick, it was successful ...expect ALL data to be deleted from phone. Google is your friend and I did get all the files from somewhere
You use a special software from the phone, it's coloros software and with provided files it recognise the phone and flash it(2-3 seperate flashes through the software if I remember correctly) - don't worry as long as the phone turns on(mine was turning on but did nothing ...blank, only way to turn it off was to hold power button and hold it(forced turn off))
P.S. The phone wasn't recognised by the OS ...only from this app(cool? ..weird if you ask me - I'm a computer repair tech guy and find this hard to believe if it didn't happen and see it with my own eyes - on the other hand it could be somewhere hidden in the system and recognised like something else so I won't put my hand in fire to verify this )
Thanks!
evronetwork said:
Hello dude,
While it was quite some time when I did this unbrick, it was successful ...expect ALL data to be deleted from phone. Google is your friend and I did get all the files from somewhere
You use a special software from the phone, it's coloros software and with provided files it recognise the phone and flash it(2-3 seperate flashes through the software if I remember correctly) - don't worry as long as the phone turns on(mine was turning on but did nothing ...blank, only way to turn it off was to hold power button and hold it(forced turn off))
P.S. The phone wasn't recognised by the OS ...only from this app(cool? ..weird if you ask me - I'm a computer repair tech guy and find this hard to believe if it didn't happen and see it with my own eyes - on the other hand it could be somewhere hidden in the system and recognised like something else so I won't put my hand in fire to verify this )
Click to expand...
Click to collapse
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
broccolicakes said:
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
Click to expand...
Click to collapse
I read just the other day that someone needs the 64gb image instead of the 16gb image. You did so well so far, I'm sure you'll figure this one out. Congrats! "Encrochat Beware!"
The mention of the 64gb vs 16gb image is here:
https://forums.oneplus.net/threads/solution-recover-from-hard-bricked-oneplus-one.104943/
He links to the images here:
http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541
help
broccolicakes said:
I figured it out, thanks ! Now I'm stuck with a more minor problem of only having 16gb visible on my 64gb phone. Can't write the userdata_64G image to my phone. Still trying some stuff out and I'll probably just make a new post if I can't get it to work. Thanks again!
Click to expand...
Click to collapse
Hi broccolicakes, cane you please tell me how you figured it out. Because Am at your same position with an Oneplus x ??
please tell me how you did it????
redi.c said:
Hi broccolicakes, cane you please tell me how you figured it out. Because Am at your same position with an Oneplus x ??
please tell me how you did it????
Click to expand...
Click to collapse
Hi there, sorry in advance this might not be very helpful in your situation. I ended up using the ColorOS repair tool for Oneplus One that I mentioned earlier in the post. It turned out I just didn't have the correct drivers so once I sorted those out the tool was able to bypass all the software and replace everything on the phone so that I could then install my own OS.
I guess the trick would be to find a version of this tool for OneplusX. I'm not sure if there is one available, I haven't looked. Maybe make a separate post about that? The ColorOS tool I'm talking about is from here: http://forum.xda-developers.com/showpost.php?p=55024864&postcount=136 and it just looks directly for the Qualcomm chip and writes to that. I'm not sure where that tool came from, if it made its way out of Oneplus directly or if someone created it afterwards...