[Q] Root with stock 4.4.2 - Galaxy Note 10.1 Q&A, Help & Troubleshooting

[Q] Root with stock 4.4.2 - Galaxy Note 10.1 Q&A, Help & Troubleshooting

As the title says. How to get root running stock kit kat?
N8000XXUDNF1

pinball ' wizard said:
As the title says. How to get root running stock kit kat?
N8000XXUDNF1
Click to expand...
Click to collapse
Use CF-Auto-Root: http://autoroot.chainfire.eu/
1. Find your model on the list in the website and download the file
2. Download Odin and run it on your PC
3. Put your tablet in Download mode (while your tablet is on, press and hold the power and volume down button) and plug it in your PC
4. Load the CF-Auto-Root file as a PDA
5. Press Start in Odin and you should be good to go.

Related

[Q] cant install CWM on P3100

Hi,
I have a Samsung Note P3100. I am running 4.1.1 android. The problem is that I cant install CWM recovery to my Samsung Galaxy Tab:
I use this instructions to flash CWM through ODIN:
III. Installing CWM Recovery on Galaxy Tab 2 7.0
1. First of all, close Kies software on your PC.
2. Reboot your Galaxy Tab 2 into the download mode. You can do so by pressing and holding both Volume DOWN and Power keys together.
3. Press the Volume UP key to enter into the download mode.
4. Launch the Odin Tool on your PC by double-clicking on Odin3 v1.85.exe file.
5. Connect your tablet to your PC using the USB cable.
6. From the Odin Tool, choose PDA and then select the recovery.tar.md5 file you downloaded earlier. You will have following screen:
[ Select "PDA" option ]
7. Click on the Start button to begin flashing recovery. Your tablet will reboot when the flashing is done
Everything Goes well, I see success in ODIN. But when I goto recovery by using Volume UP and Power keys simultaneously. It shows me the Stock recovery instead of CWM Recovery. And I am not being able to root my tab either. I used superoneclick, Heimdall but to no effect. Cant root it. The Heimdall says this:
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
What does this error mean?
Can somebody help me in this?
Thanks in Advance!

raj_malhotra20042000 said:
Hi,
I have a Samsung Note P3100. I am running 4.1.1 android. The problem is that I cant install CWM recovery to my Samsung Galaxy Tab:
I use this instructions to flash CWM through ODIN:
III. Installing CWM Recovery on Galaxy Tab 2 7.0
1. First of all, close Kies software on your PC.
2. Reboot your Galaxy Tab 2 into the download mode. You can do so by pressing and holding both Volume DOWN and Power keys together.
3. Press the Volume UP key to enter into the download mode.
4. Launch the Odin Tool on your PC by double-clicking on Odin3 v1.85.exe file.
5. Connect your tablet to your PC using the USB cable.
6. From the Odin Tool, choose PDA and then select the recovery.tar.md5 file you downloaded earlier. You will have following screen:
[ Select "PDA" option ]
7. Click on the Start button to begin flashing recovery. Your tablet will reboot when the flashing is done
Everything Goes well, I see success in ODIN. But when I goto recovery by using Volume UP and Power keys simultaneously. It shows me the Stock recovery instead of CWM Recovery. And I am not being able to root my tab either. I used superoneclick, Heimdall but to no effect. Cant root it. The Heimdall says this:
Initialising connection...
Detecting device...
ERROR: Failed to access device. libusb error: -12
What does this error mean?
Can somebody help me in this?
Thanks in Advance!
Click to expand...
Click to collapse
Same issue on mine as well. im on official 4.0.4
---------- Post added at 11:05 PM ---------- Previous post was at 10:35 PM ----------
I just tried other a newer version of CWM
first go to this post
http://forum.xda-developers.com/showthread.php?t=1880010
then get P3100_CWM_RECOVERY-6.0.1.3_SUPERSU-0.96_BUSYBOX-1.20.2.tar.md5.zip
i use odin3 v3.06 to flash it in and CWM is finally working! so try it! :victory:

Try in odin to flash file again ,then uncheck autoreboot in its optiona ,then go to recovery manually by volume up+power ,if question appear as fix recovery say yes, done
Sent from my GT-I9300 using xda app-developers app

[Q] How To Root Galaxy Tab 7.7 (JB 4.1.2)???

is there anyway root galaxy tab 7.7 jb 4.1.2?

xiaoakio said:
is there anyway root galaxy tab 7.7 jb 4.1.2?
Click to expand...
Click to collapse
CWM from here: http://forum.xda-developers.com/showthread.php?t=2139766 then
SuperSU from here: http://forum.xda-developers.com/showthread.php?t=1538053

Tutorial here
http://forum.xda-developers.com/showthread.php?t=1849235

Thanks
Thanks Everybody....i did it
own u all bro

xiaoakio said:
Thanks Everybody....i did it
own u all bro
Click to expand...
Click to collapse
Glad to help
Maybe click the Button so as to reflect in our Thanks Meter:angel:
Edit
Whoops, back track. I just noticed the OP request is for JB. My link is for ICS. To be safe, this needs confirmation that it works in JB. Sorry.

rebski said:
Glad to help
Maybe click the Button so as to reflect in our Thanks Meter:angel:
Edit
Whoops, back track. I just noticed the OP request is for JB. My link is for ICS. To be safe, this needs confirmation that it works in JB. Sorry.
Click to expand...
Click to collapse
Doesn't work for me. Signature verification failed.

that supersu will work on anything... you just need to flash CWM...

So it must flash cwm first, is it will get yellow triangle and binary counter?
is there temporary cwm?
Sent from my GT-P6800 using Tapatalk 2

nope... we wont have yellow triangle or binary counter count... we are not note/note2/s3/s4

Thanks. So there is no yellow triangle or binary counter effect when flashing via odin for 7.7.
Sent from my GT-P6800 using Tapatalk 2

the universal root works, got my jb4.1.2 rooted. now removing the bloatwares.

Any other way to inject cwm without using odin on pc? I'm trying to root this one but i need first to install cwm. I don't want to increase my flash counter.
| Sent from GT-P6800 using Tapatalk HD |

Well there is heimdall 1.3.1, but you still need a pc..

biopsin said:
Well there is heimdall 1.3.1, but you still need a pc..
Click to expand...
Click to collapse
I guess i have no choice then. Time to say Goodbye to my warranty.
UPDATE:
My custom binary download is still "NO". I think it will start counting when you flashed a full custom rom using odin3 on pc. I'm gonna use mobile odin pro now.

Fulaeetoy said:
I guess i have no choice then. Time to say Goodbye to my warranty.
UPDATE:
My custom binary download is still "NO". I think it will start counting when you flashed a full custom rom using odin3 on pc. I'm gonna use mobile odin pro now.
Click to expand...
Click to collapse
i forgot how many times i had flash my device... the counter still said no... so it wont increase... and i had sent my device in its root condition due to hardware failure... twice... the service centre dont even care... :highfive: i flash the latest jb around 7 times already as i experimenting some other device mod that might be compatible with the tab... (yup i'm lazy to do nandroid backup) and several times more as i am perfecting the damn script for making my new deodexed slim version of current jb release... the counter still NO... so dont worry... flash awayyyy...

edan1979 said:
i forgot how many times i had flash my device... the counter still said no... so it wont increase... and i had sent my device in its root condition due to hardware failure... twice... the service centre dont even care... :highfive: i flash the latest jb around 7 times already as i experimenting some other device mod that might be compatible with the tab... (yup i'm lazy to do nandroid backup) and several times more as i am perfecting the damn script for making my new deodexed slim version of current jb release... the counter still NO... so dont worry... flash awayyyy...
Click to expand...
Click to collapse
True. We're in the same scenario and i thought they didn't care at all about users installing custom roms. One time, i go to their shop to service my unit because of software issues. I was surprised that they recommend me to flash my own unit using odin, even my unit is still under warranty. I think they are too lazy to flash a unit that is still under warranty because it covers it all (No pay). Another day i visit their store and i noticed their 2 tabs has Supersu on it. LOL.
This is is my 1st time to use odin pc to my tab. I frequently used mobile odin pro on my android devices. That's right! Flash to the max!
| Sent from GT-P6800 using Tapatalk HD |

Can someone describe how to root the P6800 with Stock JB in detail? I have tried following the links in the earlier posts, but with no success. I had it rooted with 4.0.4, and need root to get a higher volume.. cwm-6.0.3.0-p6800.tar did not work with Odin. isn't there a zip file so I can root from standard recovery?

jorkus said:
Can someone describe how to root the P6800 with Stock JB in detail? I have tried following the links in the earlier posts, but with no success. I had it rooted with 4.0.4, and need root to get a higher volume.. cwm-6.0.3.0-p6800.tar did not work with Odin. isn't there a zip file so I can root from standard recovery?
Click to expand...
Click to collapse
Below are the instructions i put together for myself when going to ICS, it should work for JB too. This is a link to my dropbox folder with all the files https://www.dropbox.com/sh/ncr4cya5mx8ieje/NKlP1C5naD It may be that your cwm file is corrupt so try downloading again.
Flash the "Root_SuperSU.0.95.Only-signed.zip" directly in stock recovery 3e, no need to cwm:
How to do that?
- Download the Root_SuperSU.0.95.Only-signed.zip
- I will create Universal Root folder (Optional)
- Put the created folder at your External Micro SDcard
- Boot to recovery (Hold Power+Volume Up)
In official stock recovery 3e:
- Use Volume button to navigate to apply update from external storage. > View Image <
- After you choose apply update from external storage
- Press Power button to enter
- Volume button to navigate to the Universal Root folder. > View Image <
- Choose Root_SuperSU.0.95.Only-signed.zip > View Image <
- Press Power button
- Flashing begin >View Image<
Once done
- Navigate to ../ and press Power button
- navigate again to ../ and press power button
- and reboot system now
Your device will be rebooted and enjoy your rooted ICS. No cwm recovery
To install CWM Recovery using Mobile Odin.
- Download Locerra's cwm recovery. Im using Locerra's recovery v5.5.0.4: HERE
- Once download, extract it and it will be recovery.img
- Put it in Internal or External SDcard (Up to you, which convenience for you)
- Launch Mobile Odin
- Choose Open file and choose the location where you put it earlier
- Choose the recovery.img
- Flash firmware
Note: There will be POP UP window indicated
CONTINUE AT YOUR ON RISK - Click Countinue
- Done
To install CWM using PC odin:
Power OFF your device
Boot into download mode by pressing and holding ‘volume down’ + ‘Power’ buttons until your device’s screen displays an yellow warning alert.
Press ‘volume up’ to confirm the download mode boot. Now, an Android logo with the ‘downloading’ text will appear.
Launch Odin executable on your PC.
After Odin launches successfully you need to connect the device to your computer via USB cable.
In Odin you should see the text ‘added’ displayed, which means that all drivers have been installed and you are free to move to the next step.
Go to Odin and click the button that says ‘PDA’. Browse for the CWM recovery .tar file
Next, press the ‘Start’ button and Odin will start to install ‘clockworkmod recovery’ on your device
When the install is finished, your device should restart and when the Samsung loading logo appears you need to disconnect the device from your PC. Odin will now say ‘PASS’ and that would be all. Your phone is now running the CWM Recovery image.

nutley said:
Below are the instructions i put together for myself when going to ICS, it should work for JB too. This is a link to my dropbox folder with all the files https://www.dropbox.com/sh/ncr4cya5mx8ieje/NKlP1C5naD It may be that your cwm file is corrupt so try downloading again.
Flash the "Root_SuperSU.0.95.Only-signed.zip" directly in stock recovery 3e, no need to cwm:
How to do that?
- Download the Root_SuperSU.0.95.Only-signed.zip
- I will create Universal Root folder (Optional)
- Put the created folder at your External Micro SDcard
- Boot to recovery (Hold Power+Volume Up)
In official stock recovery 3e:
- Use Volume button to navigate to apply update from external storage. > View Image <
- After you choose apply update from external storage
- Press Power button to enter
- Volume button to navigate to the Universal Root folder. > View Image <
- Choose Root_SuperSU.0.95.Only-signed.zip > View Image <
- Press Power button
- Flashing begin >View Image<
Once done
- Navigate to ../ and press Power button
- navigate again to ../ and press power button
- and reboot system now
Your device will be rebooted and enjoy your rooted ICS. No cwm recovery
To install CWM Recovery using Mobile Odin.
- Download Locerra's cwm recovery. Im using Locerra's recovery v5.5.0.4: HERE
- Once download, extract it and it will be recovery.img
- Put it in Internal or External SDcard (Up to you, which convenience for you)
- Launch Mobile Odin
- Choose Open file and choose the location where you put it earlier
- Choose the recovery.img
- Flash firmware
Note: There will be POP UP window indicated
CONTINUE AT YOUR ON RISK - Click Countinue
- Done
To install CWM using PC odin:
Power OFF your device
Boot into download mode by pressing and holding ‘volume down’ + ‘Power’ buttons until your device’s screen displays an yellow warning alert.
Press ‘volume up’ to confirm the download mode boot. Now, an Android logo with the ‘downloading’ text will appear.
Launch Odin executable on your PC.
After Odin launches successfully you need to connect the device to your computer via USB cable.
In Odin you should see the text ‘added’ displayed, which means that all drivers have been installed and you are free to move to the next step.
Go to Odin and click the button that says ‘PDA’. Browse for the CWM recovery .tar file
Next, press the ‘Start’ button and Odin will start to install ‘clockworkmod recovery’ on your device
When the install is finished, your device should restart and when the Samsung loading logo appears you need to disconnect the device from your PC. Odin will now say ‘PASS’ and that would be all. Your phone is now running the CWM Recovery image.
Click to expand...
Click to collapse
Thank's for your quick help, and for sharing your files! But... When trying to apply the root_super_su from recovery I get signature verification failed

I've added some newer version of the file, give try those a try.
Also take a look here http://forum.xda-developers.com/showthread.php?t=1746794 It is a very comprehensive guide that shouldnt be any different to the 7.7

[Q] galaxy y cdma (i905) dead please help

hello, i couldnt find a custom rom for galaxy y cdma so i just flashed the one for normal galaxy y now it wont start not even in recovery or download mode please help

z3balawi said:
hello, i couldnt find a custom rom for galaxy y cdma so i just flashed the one for normal galaxy y now it wont start not even in recovery or download mode please help
Click to expand...
Click to collapse
flashed a rom form a different phone. welcome to Bricked.

Trozzul said:
flashed a rom form a different phone. welcome to Bricked.
Click to expand...
Click to collapse
im an idiot can you help me?

z3balawi said:
im an idiot can you help me?
Click to expand...
Click to collapse
Its dead it gone unless you pay for JTAG service or know how to do it yourself.

galaxy y cdma (i905) dead please help
Process to restore or recover galaxy y but before to do this need some items to restore it:
1. Data cable
2. Odin tool (you can download it from http://www.mediafire.com/download/ihzidk2uga9t8uh/Odin_Multi_Downloader_v4.42.exe)
3. Cooper OPS (Download it from here http://www.mediafire.com/download/t88vdo96ogwdsto/Cooper_v1.0.ops)
4. Official Android 2.3 Gingerbread (download it from here http://www.mediafire.com/download/cszr782vqgnfdcq/S5830DDKQ8_S5830ODDKQ7_INU.zip)
Now come to process:
1. Extract the official Android 2.3 Gingerbread zip file.
2. Run the downloaded Odin tool as administrator.
3. Check One Package, Auto Reboot and Protect OPS checkbox in Odin Tool
4. Click on OPS and select the Cooper OPS
5. Click on One Package and select the Official Android ZIP md5 that you extracted in Step 1
6. Do not change other options and keep ODIN on your PC running
7. Switch off your Galaxy Y and reboot in Recovery mode by pressing Home button, Volume Down button and Power button together
8. Connect your Phone to your Computer via USB as soon as Recovery mode starts up
9. ODIN should show up your Galaxy Y connected
10. When ODIN shows connected, Click Start and wait for around 10 minutes to see the message PASS
11. On your Galaxy Y, enter into Recovery Mode again (holding Home+Power together this time)
12. You can browse using Vol up/down keys. Select Wipe Data/Factory Data and then Wipe Cache Partition
13. Reboot your Phone. Your phone should be restored back to Normal
Best of luck! Gives thums-up to my post!

brookeaidan said:
Process to restore or recover galaxy y but before to do this need some items to restore it:
1. Data cable
2. Odin tool (you can download it from http://www.mediafire.com/download/ihzidk2uga9t8uh/Odin_Multi_Downloader_v4.42.exe)
3. Cooper OPS (Download it from here http://www.mediafire.com/download/t88vdo96ogwdsto/Cooper_v1.0.ops)
4. Official Android 2.3 Gingerbread (download it from here http://www.mediafire.com/download/cszr782vqgnfdcq/S5830DDKQ8_S5830ODDKQ7_INU.zip)
Now come to process:
1. Extract the official Android 2.3 Gingerbread zip file.
2. Run the downloaded Odin tool as administrator.
3. Check One Package, Auto Reboot and Protect OPS checkbox in Odin Tool
4. Click on OPS and select the Cooper OPS
5. Click on One Package and select the Official Android ZIP md5 that you extracted in Step 1
6. Do not change other options and keep ODIN on your PC running
7. Switch off your Galaxy Y and reboot in Recovery mode by pressing Home button, Volume Down button and Power button together
8. Connect your Phone to your Computer via USB as soon as Recovery mode starts up
9. ODIN should show up your Galaxy Y connected
10. When ODIN shows connected, Click Start and wait for around 10 minutes to see the message PASS
11. On your Galaxy Y, enter into Recovery Mode again (holding Home+Power together this time)
12. You can browse using Vol up/down keys. Select Wipe Data/Factory Data and then Wipe Cache Partition
13. Reboot your Phone. Your phone should be restored back to Normal
Best of luck! Gives thums-up to my post!
Click to expand...
Click to collapse
OP said he can't boot into recover or download mode

[Marshmallow][official] Android 6.0 official update for sparkle v

OTA links are already there on xda, but here was no specific thread for sparkle v so i am writing one
Google has released the OTA files for sparkle v and other android one devices.
NOTE: To update your phone using OTA files your phone should be running Stock lollipop or atleast stock recovery
If you are running a custom rom or custom recovery then before proceeding to this guide you must revert back to stock lollipop using sp flash tool
Pre-requisites: 1.Your phone should be atleast 60% charged
2. Back up all important data (just to be safe)
3. Make sure you have the stock lollipop rom so that you can get your phone back if anything goes wrong.
GUIDE-
Sparkle V users can easily update their device by following these steps:
Step 1: Download the official Marshmallow OTA file from here https://android.googleapis.com/packages/ota/google_sparklevsprout_sparklev/d1178816334e0c160d435ab0a88f78a5005053c0.signed-sprout-karbonn-ota-2280749-omit-oem.zip
Step 2: Connect your smartphone to computer using the original USB cable.
Step 3: Copy and paste the OTA zip files to phone's storage and make a note of its location.
Step 4: Boot your smartphone into recovery mode or stock recovery: Disconnect the phone from computer, and then turn it off.
Press and hold both the Volume and the Power buttons until the display turns on and enters bootloader mode.
Hit the volume button to open the Recovery menu and then press the power button to select it. Your phone should now boot into recovery mode.
At this moment, a dead Android with an exclamation mark should appear on the screen. Now press and hold Power button for three seconds and then hit the Volume up button once to progress into recovery mode.
Step 5: Return to the main recovery screen and choose 'install update from sdcard'.
Step 6: Then select the OTA zip file using the volume buttons for navigation and the Power button to select any file or open a folder. After you select the zip file, confirm its installation and the update should start installing on your device.
Step 7: Once the installation is done, return to main screen of recovery. Choose Reboot system now to restart the phone and boot into the newly installed Android 6.0 Marshmallow OTA update from Google.
Voila!! You are running official Android 6.0
I found this on ibtimes. I HAVE JUST COPY PASTED the guide for convenience. Hit thanks if helped.

How to Root Note Edge (SM-N915T) with Marshmallow 6.0.1?

Hello,
XDA, would it be possible to look into rooting a Samsung Note Edge (SM-N915T) with Marshmallow 6.0.1. I've tried different things, but there doesn't seem to be a process for this phone with that OS.
Let me know.
Thanks,
Whirlpool14

whirlpool14 said:
Hello,
XDA, would it be possible to look into rooting a Samsung Note Edge (SM-N915T) with Marshmallow 6.0.1. I've tried different things, but there doesn't seem to be a process for this phone with that OS.
Let me know.
Thanks,
Whirlpool14
Click to expand...
Click to collapse
you should flash via Odin for CWM and pull out battery method if notified FAIL, also cautioned about the SUPERSU must be 2.76 which patched the Samsung security updated, i was success rooted my Sprint 915P FW6.0.1 dueto this way

I rooted my phone following this procedure (the FY version of the Note Edge but should work for any other)
You need the following tools:
Samsung drivers:
https://www.dropbox.com/s/3d61st8zaxas4pt/SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe?dl=0
Odin 3:09:
https://www.dropbox.com/s/ua0sqizz1m6558d/Odin3_v3.09.zip?dl=0
SuperSU 2.74:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
and CWM for the T version of the Note (from this thread):
http://forum.xda-developers.com/not...15s-n9150-cwm-based-recovery-6-0-5-1-t2954960
Move all files to a folder on the PC.
Copy the SuperSU your Cell (SD card int/ext).
Install the drivers for the phone.
Then go with the phone in the DL (download) mode.
Start Odin, connect the phone to the PC.
If Odin recognizes the cell phone continue.
Some side notes:
To get in DL (download) mode use key combination <VOL DOWN + HOME + POWER>.
To get in recovery mode use key combination <UP VOL + HOME + POWER>.
Press these buttons simultaneously.
You flash CWM in DL mode via Odin (in "AP" insert CWM) to the mobile phone.
It is important that you previously deactivate "Auto Reboot" in Odin.
When the flash process is finished, you just wait one minute after you have pressed the "Start", pull the cable from the phone and remove the battery.
Wait a couple seconds, and put the battery back inside.
Now, and this is important, you have to come directly into recovery mode.
If the phone starts normally into the system, CWM is overwritten with the standard recovery.
If you're in CWM, you go to "Install zip" and select the SuperSU to install.
ATTENTION: if CWM asks you to install root or SuperSU, answer with NO, else you get a bootloop!
Now you can Restart, normal into the system.
That's it already, if you're in the system, you install this app from Play Store:
https://play.google.com/store/apps/details?id=com.jrummyapps.rootchecker
When you got root just update SuperSU and install busybox and you are good to go

help
btotaku said:
I rooted my phone following this procedure (the FY version of the Note Edge but should work for any other)
You need the following tools:
Samsung drivers:
https://www.dropbox.com/s/3d61st8zaxas4pt/SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe?dl=0
Odin 3:09:
https://www.dropbox.com/s/ua0sqizz1m6558d/Odin3_v3.09.zip?dl=0
SuperSU 2.74:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
and CWM for the T version of the Note (from this thread):
http://forum.xda-developers.com/not...15s-n9150-cwm-based-recovery-6-0-5-1-t2954960
Move all files to a folder on the PC.
Copy the SuperSU your Cell (SD card int/ext).
Install the drivers for the phone.
Then go with the phone in the DL (download) mode.
Start Odin, connect the phone to the PC.
If Odin recognizes the cell phone continue.
Some side notes:
To get in DL (download) mode use key combination <VOL DOWN + HOME + POWER>.
To get in recovery mode use key combination <UP VOL + HOME + POWER>.
Press these buttons simultaneously.
You flash CWM in DL mode via Odin (in "AP" insert CWM) to the mobile phone.
It is important that you previously deactivate "Auto Reboot" in Odin.
When the flash process is finished, you just wait one minute after you have pressed the "Start", pull the cable from the phone and remove the battery.
Wait a couple seconds, and put the battery back inside.
Now, and this is important, you have to come directly into recovery mode.
If the phone starts normally into the system, CWM is overwritten with the standard recovery.
If you're in CWM, you go to "Install zip" and select the SuperSU to install.
ATTENTION: if CWM asks you to install root or SuperSU, answer with NO, else you get a bootloop!
Now you can Restart, normal into the system.
That's it already, if you're in the system, you install this app from Play Store:
https://play.google.com/store/apps/details?id=com.jrummyapps.rootchecker
When you got root just update SuperSU and install busybox and you are good to go
Click to expand...
Click to collapse
i have the fy version can you help me retrieve the file for that model ??

edoluck90 said:
i have the fy version can you help me retrieve the file for that model ??
Click to expand...
Click to collapse
Go with the CWM for the F version here, this will work with FY as well, i did it myself > http://forum.xda-developers.com/attachment.php?attachmentid=3037310&d=1417138979

btotaku said:
Go with the CWM for the F version here, this will work with FY as well, i did it myself > http://forum.xda-developers.com/attachment.php?attachmentid=3037310&d=1417138979
Click to expand...
Click to collapse
OK .i feel more secure if anyone can give me a tutorial because is the first time I root a new gen phone, the last phone I root is a galaxy 2. Thanks for your time

edoluck90 said:
OK .i feel more secure if anyone can give me a tutorial because is the first time I root a new gen phone, the last phone I root is a galaxy 2. Thanks for your time
Click to expand...
Click to collapse
You can follow my instruction step by step, i did it exactly the same way. You can check handy-faq forum as well, i got the instructions there and just replaced TWRP with CWM, just read in german here > http://www.handy-faq.de/forum/galaxy-note-edge-root-cwm-based-recovery-6-0-5-1-t313111/?page=3

btotaku said:
I rooted my phone following this procedure (the FY version of the Note Edge but should work for any other)
You need the following tools:
Samsung drivers:
https://www.dropbox.com/s/3d61st8zaxas4pt/SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe?dl=0
Odin 3:09:
https://www.dropbox.com/s/ua0sqizz1m6558d/Odin3_v3.09.zip?dl=0
SuperSU 2.74:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
and CWM for the T version of the Note (from this thread):
http://forum.xda-developers.com/not...15s-n9150-cwm-based-recovery-6-0-5-1-t2954960
Move all files to a folder on the PC.
Copy the SuperSU your Cell (SD card int/ext).
Install the drivers for the phone.
Then go with the phone in the DL (download) mode.
Start Odin, connect the phone to the PC.
If Odin recognizes the cell phone continue.
Some side notes:
To get in DL (download) mode use key combination <VOL DOWN + HOME + POWER>.
To get in recovery mode use key combination <UP VOL + HOME + POWER>.
Press these buttons simultaneously.
You flash CWM in DL mode via Odin (in "AP" insert CWM) to the mobile phone.
It is important that you previously deactivate "Auto Reboot" in Odin.
When the flash process is finished, you just wait one minute after you have pressed the "Start", pull the cable from the phone and remove the battery.
Wait a couple seconds, and put the battery back inside.
Now, and this is important, you have to come directly into recovery mode.
If the phone starts normally into the system, CWM is overwritten with the standard recovery.
If you're in CWM, you go to "Install zip" and select the SuperSU to install.
ATTENTION: if CWM asks you to install root or SuperSU, answer with NO, else you get a bootloop!
Now you can Restart, normal into the system.
That's it already, if you're in the system, you install this app from Play Store:
https://play.google.com/store/apps/details?id=com.jrummyapps.rootchecker
When you got root just update SuperSU and install busybox and you are good to go
Click to expand...
Click to collapse
THANKS btotaku! Just reporting back that this method works on T-Mobile's SM-N915T on 6.0.1 N915TUBU2DPG2. You generous information is highly appreciated! :good::good::good:

thanks alottttttttttttttt man it works on my N915T MM 6.0.1
btotaku said:
I rooted my phone following this procedure (the FY version of the Note Edge but should work for any other)
You need the following tools:
Samsung drivers:
https://www.dropbox.com/s/3d61st8zaxas4pt/SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe?dl=0
Odin 3:09:
https://www.dropbox.com/s/ua0sqizz1m6558d/Odin3_v3.09.zip?dl=0
SuperSU 2.74:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
and CWM for the T version of the Note (from this thread):
http://forum.xda-developers.com/not...15s-n9150-cwm-based-recovery-6-0-5-1-t2954960
Move all files to a folder on the PC.
Copy the SuperSU your Cell (SD card int/ext).
Install the drivers for the phone.
Then go with the phone in the DL (download) mode.
Start Odin, connect the phone to the PC.
If Odin recognizes the cell phone continue.
Some side notes:
To get in DL (download) mode use key combination <VOL DOWN + HOME + POWER>.
To get in recovery mode use key combination <UP VOL + HOME + POWER>.
Press these buttons simultaneously.
You flash CWM in DL mode via Odin (in "AP" insert CWM) to the mobile phone.
It is important that you previously deactivate "Auto Reboot" in Odin.
When the flash process is finished, you just wait one minute after you have pressed the "Start", pull the cable from the phone and remove the battery.
Wait a couple seconds, and put the battery back inside.
Now, and this is important, you have to come directly into recovery mode.
If the phone starts normally into the system, CWM is overwritten with the standard recovery.
If you're in CWM, you go to "Install zip" and select the SuperSU to install.
ATTENTION: if CWM asks you to install root or SuperSU, answer with NO, else you get a bootloop!
Now you can Restart, normal into the system.
That's it already, if you're in the system, you install this app from Play Store:
https://play.google.com/store/apps/details?id=com.jrummyapps.rootchecker
When you got root just update SuperSU and install busybox and you are good to go
Click to expand...
Click to collapse
thumbs up bro ...ages ago i was trying to root my note edge T-Mobiles and now finally i found here the solution and i followed your mentioned steps and rooted N915T MM 6.0.1
thanks again!! keeep sharing and helping! :good:

this did not work for me, I think my bootloader is locked, how can I unlock it?

delson55 said:
this did not work for me, I think my bootloader is locked, how can I unlock it?
Click to expand...
Click to collapse
Which version have you got?

If we already have recovery do we still need to step backwards and install cwm, also do we just not let supersu update to 2.79 and leave it at 2.74 or 2.76?
I appear to only have partial root, none of the app's are [rompting me to grant or deny supersu.

Will this thing work is twrp latest recovery installed??

btotaku said:
I rooted my phone following this procedure (the FY version of the Note Edge but should work for any other)
You need the following tools:
Samsung drivers:
https://www.dropbox.com/s/3d61st8zaxas4pt/SAMSUNG_USB_Driver_for_Mobile_Phones_1_5_6_0.exe?dl=0
Odin 3:09:
https://www.dropbox.com/s/ua0sqizz1m6558d/Odin3_v3.09.zip?dl=0
SuperSU 2.74:
https://download.chainfire.eu/964/SuperSU/BETA-SuperSU-v2.74-2-20160519174328.zip?retrieve_file=1
and CWM for the T version of the Note (from this thread):
http://forum.xda-developers.com/not...15s-n9150-cwm-based-recovery-6-0-5-1-t2954960
Move all files to a folder on the PC.
Copy the SuperSU your Cell (SD card int/ext).
Install the drivers for the phone.
Then go with the phone in the DL (download) mode.
Start Odin, connect the phone to the PC.
If Odin recognizes the cell phone continue.
Some side notes:
To get in DL (download) mode use key combination <VOL DOWN + HOME + POWER>.
To get in recovery mode use key combination <UP VOL + HOME + POWER>.
Press these buttons simultaneously.
You flash CWM in DL mode via Odin (in "AP" insert CWM) to the mobile phone.
It is important that you previously deactivate "Auto Reboot" in Odin.
When the flash process is finished, you just wait one minute after you have pressed the "Start", pull the cable from the phone and remove the battery.
Wait a couple seconds, and put the battery back inside.
Now, and this is important, you have to come directly into recovery mode.
If the phone starts normally into the system, CWM is overwritten with the standard recovery.
If you're in CWM, you go to "Install zip" and select the SuperSU to install.
ATTENTION: if CWM asks you to install root or SuperSU, answer with NO, else you get a bootloop!
Now you can Restart, normal into the system.
That's it already, if you're in the system, you install this app from Play Store:
https://play.google.com/store/apps/details?id=com.jrummyapps.rootchecker
When you got root just update SuperSU and install busybox and you are good to go
Click to expand...
Click to collapse
Anyone can confirm this method still works for the T-mobile SM-N915T Note Edge running 6.0.1. Thanks.

Thanks for the very clear instructions especially your warning on cwm boot loop. I was able to root my note edge sm-n915f without problems.

The links for the files to download seems to have expired. Can someone post them again? Thanks!

mrcds08 said:
The links for the files to download seems to have expired. Can someone post them again? Thanks!
Click to expand...
Click to collapse
Just google the stuff you don't have and you can find it

princehpk said:
Will this thing work is twrp latest recovery installed??
Click to expand...
Click to collapse
it works for me, just update superSU

Will this work on a Note Edge SM-N915T, N915US2DQG1. Thanks in advance....

Database Info

welcome