Database Info

How to fix (Null, Invalid, Fake) IMEI & get Official status & OTA updats - GT-I9500

How to fix (Null, Invalid, Fake) IMEI & get Official status & OTA updats - GT-I9500
Hello guys
This thread will show you how to fix your IMEI problems and get official status on your Galaxy S4 (GT-I9500)
Its working 100%
First root your device with CF-Auto-Root-ja3g-ja3gxx-gti9500
Reboot in DOWNLOAD MODE ( Volume Down + Home + Power )
Connect your phone to PC via USP cable
Run Odin3 > click PDA or AP > Choose this file (CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5)
now click Start
Phone will reboot then its rooted
Second install TWRP Recovery
Reboot in DOWNLOAD MODE ( Volume Down + Home + Power )
Connect your phone to PC via USP cable
Run Odin3 > click PDA or AP > Choose this file (openrecovery-twrp-2.7.0.0-i9500.tar)
now click Start
Phone will reboot then you have TWRP Recovery installed
Third reboot in RECOVERY MODE ( Volume Up + Home + Power )
Tap Wipe > Format Data
Tap Wipe > Advance Wipe and select all EXCEPT External SD and USB Storage
Tap Reboot > Download Mode and flash Stock Firmware (must be same country)
Wait till finish and now you have Official status and original IMEI and receive OTA updates
If you don't know how to flash Stock Firmware this is how
Reboot in DOWNLOAD MODE ( Volume Down + Home + Power )
Connect your phone to PC via USP cable
Run Odin3 > click PDA or AP > Choose downloaded file .tar.md5
In my case its I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1.tar.md5
now click Start
Phone will reboot
you should make wipe data from stock recovery
and your done.
I hope it will be useful for some people
I made this thread because i saw many users asking about this problem

I follow your steps, but i still got custom status . How is this?
EDIT: Solved! After flash stock rom i do wipe data from stock recovery and i got official status!

:::fajri13::: said:
I follow your steps, but i still got custom status . How is this?
EDIT: Solved! After flash stock rom i do wipe data from stock recovery and i got official status!
Click to expand...
Click to collapse
Oops! sorry bro i didn't list this step because we normally make wipe data after flash stock rom

i9505
MasterMan82 said:
Hello guys
This thread will show you how to fix your IMEI problems and get official status on your Galaxy S4 (GT-I9500)
Its working 100%
First root your device with CF-Auto-Root-ja3g-ja3gxx-gti9500
Reboot in DOWNLOAD MODE ( Volume Down + Home + Power )
Connect your phone to PC via USP cable
Run Odin3 > click PDA or AP > Choose this file (CF-Auto-Root-ja3g-ja3gxx-gti9500.tar.md5)
now click Start
Phone will reboot then its rooted
Second install TWRP Recovery
Reboot in DOWNLOAD MODE ( Volume Down + Home + Power )
Connect your phone to PC via USP cable
Run Odin3 > click PDA or AP > Choose this file (openrecovery-twrp-2.7.0.0-i9500.tar)
now click Start
Phone will reboot then you have TWRP Recovery installed
Third reboot in RECOVERY MODE ( Volume Up + Home + Power )
Tap Wipe > Format Data
Tap Wipe > Advance Wipe and select all EXCEPT External SD and USB Storage
Tap Reboot > Download Mode and flash Stock Firmware (must be same country)
Wait till finish and now you have Official status and original IMEI and receive OTA updates
If you don't know how to flash Stock Firmware this is how
Reboot in DOWNLOAD MODE ( Volume Down + Home + Power )
Connect your phone to PC via USP cable
Run Odin3 > click PDA or AP > Choose downloaded file .tar.md5
In my case its I9500XXUFNB4_I9500OJVFNC1_I9500XXUFNC1.tar.md5
now click Start
Phone will reboot
you should make wipe data from stock recovery
and your done.
I hope it will be useful for some people
I made this thread because i saw many users asking about this problem
Click to expand...
Click to collapse
Could this work on a i9505?

I followed your steps but i still have uknown baseband and IMEI, plz help me.

codybank_789 said:
I followed your steps but i still have uknown baseband and IMEI, plz help me.
Click to expand...
Click to collapse
This guide is not usefull. It will not fix what you have.

Lennyz1988 said:
This guide is not usefull. It will not fix what you have.
Click to expand...
Click to collapse
i've got the same problem.. so can you tell me how to fix it? thanks

donzzz7 said:
i've got the same problem.. so can you tell me how to fix it? thanks
Click to expand...
Click to collapse
Not with this little information. It can be caused by numorous things.
Or you messed up or you got a hardware failure.

Thanks

So... there's actually no need for the device to be rooted, right?

Not able to install - always standard recovery menu

Hello guys.
Im struggeling to install a custom ROM at the stage of installing a CWM recovery. My S2 plus 9105p runs Android 4.2.2 and everytime I try to upload a recovery img via Odin everything works fine as expected but when I try to start (volume up, home, power) the recovery mode - it gets always into the standard Android one - not CWM recovery!!! It looks like Samsung has integrated some kind of security mechanism which keeps us from running custom ROMs...
I have realy tried maybe 5 different recovery images, but non of those worked for me.
Can you please help?
THX

try flashing the files used in this guide

karamancho said:
try flashing the files used in this guide
Click to expand...
Click to collapse
I tried exactly also this particular site and steps described on it, but didn't help... The same problem. Everything was OK, but recovery was not CWM but standard Android one.

When u have flashed ur recorvery, take ur battery out and then plug battery again. And now go to recorvery.

Now it is WORKING !
Hi guys.
I followed the step-by-step guide on this page:
http://forum.xda-developers.com/showthread.php?t=2560928
- used the CWM 6.0.4.5 and Odin3 0.7
- after successfull flash of the PDA with this recovery (manualy unset the auto-reboot option) I have pulled the battery out for a couple of seconds
- the battery came back in again and with home-volUP-Power I got directly to the new CWM recovery.
So thanx all for your support and you can lock this thread as everything is working now.
DETAILED STEPS FOR INSTALLING CWM RECOVERY IF THE PHONE AUTOMATICALLY RE_FLASHES IT:
Installation
WITH ODIN
1. Be sure, that your device is on 4.2.2 stock firmware and shut down the phone
2. Be sure that Samsung drivers are installed on your pc. Just install Kies or google for them
3. Download Odin 3.07(google it) and the CWM-Recovery image (in this case CWM 6.0.4.5 )
4. Open Odin as administrator
5. Start-up the phone by pressing Vol_DOWN + Home + Power so you get into the flash-menu.
6. After reading the disclaimer and warning stuff - simply press Vol_UP and plug the USB cable to the PC and Phone
7. In ODIN click on PDA and select the downloaded CWM-recovery (*filename*.tar.md5) . Check - "F. Reset Time" and UNCHECK!! -> "Auto Reboot"
8. Click start and wait until the blue progress bar in your device is graphicaly 100% (I also suggest to wait another minute to make things sure..)
9. Pull out the battery
10. Pull out the uSB cable from PC and phone
11. Wait abou 10-15 seconds and power up your phone to get into the recovery menu by pressing: Vol_UP + Home + Power
12. DONE

[Q] Problem in CWM

please help me
i dont know wat is version of my cwm
But it shows only six options that are as listed below:
1. Reboot
2. Apply update from ADB
3. Apply update from SDCARD
4. wipe data/factory reset
5. wipe cache partition
6. apply update from cache
when i try third option i.e. Apply update from SDCARD, it gives an error msg unknown volume for path
please help me, i want to install lollipop os on my phone or atleast kitkat rom, but not able to install
please kindly help :crying:
model no. GT-I8552
Samsung galaxy grand Quattro

Hmmm...
Are you sure this is CWM?
The options you see come from a stock recovery.
Try flashing another version of CWM.

How???
janekmuric said:
Are you sure this is CWM?
The options you see come from a stock recovery.
Try flashing another version of CWM.
Click to expand...
Click to collapse
the question arises how???
please tell procedure for flashing another version of cwm

CWM
jaskeerat11 said:
the question arises how???
please tell procedure for flashing another version of cwm
Click to expand...
Click to collapse
YOU ARE DOING EVERYHING ON YOUR OWN RISK.
I DID NOT TEST THIS.
Download Samsung drivers here: http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-USB-Driver-for-Mobile-Phones-15270.shtml
Download odin: http://d-h.st/er8
The CWM revovery itself: http://d-h.st/0Fw
1. First be sure USB Debugging is checked in ur device ( Settings>Developer Options>USB Debugging )
2. Extract the Odin file from the zip.
3. Open Odin3 (Run As Administrator).
4. Put your device in download mode. To do so, press Volume Down And Home And Power Button all together and when it vibrates release
Power Button but keep pressing left ones. You should have a triangle with an android janitor while it's saying downloading ..
VOL UP TO CONTINUE...
5. Now connect USB to PC ,you should see a blue rectangle with COM:xx and saying Added. It means that your device is ready to be flashed!
6. Go into the PDA section and select your .tar file.(CWM Recovery)
7. Dont check any option (F.reset time and Auto reboot are checked by default) So just uncheck Auto Reboot.
8. Now click Start.
9. When it's finished, it should say that "Res OK" in Odin..
10. Now remove ur USB and remove ur battery and put it back and go to Recovery Mode (Volume UP And Home And Power Button all
together and when it vibrates release Power Button but keep pressing left ones).
If you don't see Developer options go to Stettings>About phone> press Build version 10 times quickly

I dont know. problem?

Help installing twrp sm-g920f 7.0

I try to install twrp through odin but after the process is done it says in the recovery "no command" then go to the android recovery.

1. Download TWRP: https://eu.dl.twrp.me/zeroflte/
2. Start Odin as Admin
3. Boot Device into Download Mode
4. Connect your S6 to PC (Odin should show "Com 1" for example)
5. Click on "AP" and then choose twrp
6. Deactivate Auto reboot in odin
7. Flash it
8. When its done, hold Volume Down + power
9. Directly after screen goes black, make volume up + homebutton + Power
10. Now it should be flashed

thankyou
Sconny said:
1. Download TWRP:
2. Start Odin as Admin
3. Boot Device into Download Mode
4. Connect your S6 to PC (Odin should show "Com 1" for example)
5. Click on "AP" and then choose twrp
6. Deactivate Auto reboot in odin
7. Flash it
8. When its done, hold Volume Down + power
9. Directly after screen goes black, make volume up + homebutton + Power
10. Now it should be flashed
Click to expand...
Click to collapse
thanks! it worked in order to flash a custom rom I need to root?

MasterDucky2 said:
thanks! it worked in order to flash a custom rom I need to root?
Click to expand...
Click to collapse
Root is not needed. You can download any rom, Noble Experience for example, and then you go into recovery. But make a nandroid backup. Then choose the rom, follow aroma installer instructions. After that, you can flash a custom kernel like noxx. For root, use Magisk. You can find everything here in xda

Root (as a Magisk) will be depends because that's will be at Stuck of Only Recovery anyway in without Magisk... - Beside of "Auto Reboot" or Not: Doesn't be have a difference.

Backup is require or not

Is there anyway to flash TWRP without ODIN or root , as I have no access to a PC?

How To Root Samsung GALAXY J2 (SM-J200/G/H/F/M) UPDATED!

Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125

Peeran said:
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
Will this twrp works on j23g? I don't think so..

Yes,of course.

Is it working on all type of j2?

Samial said:
Is it working on all type of j2?
Click to expand...
Click to collapse
Nope

here`s the twrp for j23g
https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
and for root Just use magisk, it works on almost all smartphones and has much more features.

problems faced and solns found
1. During twrp flashing using odin, my stock recovery kept patching the twrp after reboots. So i couldn't install twrp succesfully. To fix this I unchecked "reboot" option in odin (thanks to another xda rooting guide)and switched off device manually after flashing. Then booted into recovery by pressing "home+vol up+power". this time stock rom was gone and twrp was there to welcome me.
2. i ended up in a bootloop after flashing the aforementioned superuser zip file. Instead i flashed BETA-SuperSU-v2.74-2-20160519174328.zip and fixed the bootloop.
Note- My device is Samsung Galaxy j200-G.
Here are some links to go through(as i did) ,if you face same problems:
1. https://twrp.me/samsung/samsunggalaxyj2.html
2. https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. https://www.androidinfotech.com/2016/07/root-samsung-galaxy-j2-sm-j200g-511.html

How I can unlock bootloader permanently??
SM-J200G

Will this work on SAMSUNG J200GU?

But unable to access twrp 2nd time it show custom recovery blocked by frp lock

abhi91ar said:
But unable to access twrp 2nd time it show custom recovery blocked by frp lock
Click to expand...
Click to collapse
Turn on Oem unlock in developer options.

§Ani§ said:
Turn on Oem unlock in developer options.
Click to expand...
Click to collapse
Already turned on but problem still exists. What to do now? Help me?

Ok i will try

I s there any best ROM with higher version for Samsung SM-J200H

Rooting samsung j200gu
abinashdash17 said:
1. During twrp flashing using odin, my stock recovery kept patching the twrp after reboots. So i couldn't install twrp succesfully. To fix this I unchecked "reboot" option in odin (thanks to another xda rooting guide)and switched off device manually after flashing. Then booted into recovery by pressing "home+vol up+power". this time stock rom was gone and twrp was there to welcome me.
2. i ended up in a bootloop after flashing the aforementioned superuser zip file. Instead i flashed BETA-SuperSU-v2.74-2-20160519174328.zip and fixed the bootloop.
Note- My device is Samsung Galaxy j200-G.
Here are some links to go through(as i did) ,if you face same problems:
1. https://twrp.me/samsung/samsunggalaxyj2.html
2. https://forum.xda-developers.com/ga...p-3-0-2-1-samsung-galaxy-j2-sm-j200h-t3486994
3. https://www.androidinfotech.com/2016/07/root-samsung-galaxy-j2-sm-j200g-511.html
Click to expand...
Click to collapse
Wow thank you so much bro I now have rooted my phone!! (Samsung J200GU):good: :laugh:
Note: I flashed SR5-SuperSU-v2.78-SR5-20161130091551 instead of the 2.74 mentioned above?

abhi91ar said:
Already turned on but problem still exists. What to do now? Help me
Click to expand...
Click to collapse
Turn off auto reboot in odin and then flash.

Does this work on Sm-J200h? Trying to root my device but I am doing a little research before I do.

Peeran said:
Hi Guys,
I Am Going To Guide You How To Root Your Samsung Galaxy J2 (All 2015 Variants).
I AM NOT RESPONSIBLE FOR ANY DAMAGE OR ANY HARM OCCURRED WITH YOU DURING THE PROCESS !
GUYS, FOLLOW EACH STEP CORRECTLY FOR THE PERFECT SOLUTION.
Your Samsung Galaxy J2 May Be Have Latest Or Lowest Version Of Firmware, It Doesn't Matter.
STEP 1: UNLOCKING THE BOOTLOADER :-
Switch ON Your Phone.
Goto >>SETTINGS >>ABOUT DEVICE>>TAP THE BUILD NUMBER 3 TO 5 TIMES.
Get Back To SETTINGS And Goto >>DEVELOPER OPTIONS>>TURN "ON" OEM UNLOCK.
This Will Unlock Your BOOTLOADER.
STEP 2: DOWNLOADING THE TWRP RECOVERY (CUSTOM RECOVERY) :-
Visit TWRP Homepage.
Download The File "twrp-3.1.1-0-j2lte.img.tar"
(The Latest Version Of TWRP Recovery For Galaxy J2)
OR Just Google It, You Will Find It Easily.
STEP 3: DOWNLOADING SAMSUNG ANDROID USB DRIVERS SETUP AND ODIN TOOL :-
Visit Samsung Support Files And Download Latest Android USB Drivers For Samsung.
And Also Download Latest Version Of ODIN Tool.
(These Both Files Can Be Found Very Easily By Google)
STEP 4: FLASHING THE TWRP RECOVERY.
Make Sure You Have Installed The Latest USB Drivers For Samsung And Have Latest Version Of ODIN Tool.
Switch OFF Your Phone. (To Make Sure It Is Switched Off, Remove Battery And Re - Insert It)
Boot Your Phone Into Download Mode. (This Can Be Easily Done By Holding The "VOLUME DOWN + HOME + POWER" Buttons At A Same Time.)
Now Your Phone's Screen Shows Download Mode.
Open The "ODIN.EXE" File (After The Extracting The ODIN.ZIP).
Click On "PDA" OR "AP" Then Browse And Select The "twrp-3.1.1-0-j2lte.img.tar" File.
Now, Connect Your Phone To The PC With The USB Cable. (Make Sure That Your Cable Is Not Damaged And It is At It's Peak Performance.)
Wait Until You See The "Added" Message In The Log Section Of ODIN Tool.
Now, Click On "START" To Begin The Flashing Process.
Wait Until The Process Is Completed And Then ODIN Shows The "PASS" OR "RESET" Message.
Disconnect The Phone From The PC And Let It To Power ON Itself.
STEP 5: DOWNLOADING SUPERSU FILE AND FLASHING IT WITH TWRP RECOVERY :-
Search The File "EXPERIMENTAL-BETA-SuperSU-v2.66-20160103015024.Zip" And Download It.
Put It Into Your Internal Or External Storage.
Switch OFF Your Phone.
Boot Your Into Recover Mode. (This Can Be Easily Done By Holding The "VOLUME UP + HOME + POWER" Buttons At A Same Time.)
Now Instead Of Stock Recovery, You Will See The TWRP Recovery.
At The First Time It Will Ask For Mount System.
Swipe And Give Permissions To Mount The System.
Now, Click On "INSTALL" And Browse Your Downloaded SUPERSU.Zip And Swipe To Flash It.
Wait Till The Flash Is Completed And Then Click On "REBOOT SYSTEM".
The Phone Will Reboots Itself. (It Will Reboot For Two Times, Don't Worry ; Let It To Boot Completely And Don't Interrupt The Process.
After The Successful Boot Up, It Will Show Android Is Upgrading And Takes You To The Home Launcher ; Launch Your App Drawer To See Your SUPERSU App Installed.
STEP 6: ROOT VERIFICATION :-
Goto Play Store And Download Root Checker Basic App.
Launch It And Verify Yourself.
KEEP SMILING!!!
DOWNLOAD LINKS :-
1. Samsung Android USB Drivers :
http://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
2. ODIN Tool :
http://odindownload.com/mobile/
3. TWRP Recovery :
https://dl.twrp.me/j2lte/
4. SUPERSU :
https://forum.xda-developers.com/showpost.php?p=64161125
Click to expand...
Click to collapse
whether after I take the steps above my data will be lost ?

Phones bricked now....
you dog my phones bricked should of mentioned to make a backup u fuk wit

Nice Tutorials
Hey i m ramcharan thanks nice guide how to root samsung J200G