Database Info

Stock Rom of LAVA IRIS 458Q

If You Have got in Trouble after Wrong Flashing of any Custom Rom.No Need to worry,Now you Can Get Back To Stock Rom With This
Link of Stock Rom:-http://www.mediafire.com/folder/w3cbtjr2g4p91/iris_458q.
Procedure to install stock rom are as following :-
STEPS:
1. Download attached files and unzip the folder in your PC.
2.Extract it to a folder & Install drivers
3. Run SP Flash tool as an Administrator.
4. Load Scatterer file
5. press F9 or firmware>upgrade on flash tool.
6. connect your mobile in switched off mode.
7. wait for the SP tool procedure.
8. Green circle pop-up and say download complete.
9. Restart your phone.. VIOLA ur phone booted. Boot loop problem solved.
and you have got your original os back.
Note :-if you find this not well explanetory then refer to this linkhttp://forum.xda-developers.com/showthread.php?t=1982587

No Rear Camera
patel_s said:
If You Have got in Trouble after Wrong Flashing of any Custom Rom.No Need to worry,Now you Can Get Back To Stock Rom With This
Link of Stock Rom:-http://www.mediafire.com/folder/w3cbtjr2g4p91/iris_458q.
Procedure to install stock rom are as following :-
STEPS:
1. Download attached files and unzip the folder in your PC.
2.Extract it to a folder & Install drivers
3. Run SP Flash tool as an Administrator.
4. Load Scatterer file
5. press F9 or firmware>upgrade on flash tool.
6. connect your mobile in switched off mode.
7. wait for the SP tool procedure.
8. Green circle pop-up and say download complete.
9. Restart your phone.. VIOLA ur phone booted. Boot loop problem solved.
and you have got your original os back.
Click to expand...
Click to collapse
I tried to restore/ flash this to my LAVA IRIS 458Q but then the camera app is gone
and when I tried to download a camera app the rear camera is gone

sorry for inconvenience
nightrobin said:
I tried to restore/ flash this to my LAVA IRIS 458Q but then the camera app is gone
and when I tried to download a camera app the rear camera is gone
Click to expand...
Click to collapse
i think you have flashed it in a wrong device,that's why happening so.make sure your device is iris458q.

@patel_s man, can u help? Do U know anything how to solve problems with Update.zip on Hp Slate 7 VoiceTab 6100en? Can u help me and many of us which been screwed by aofull HP company??? If U can, ill tell U whole problem in few sentences. Thank U!

[q] cherry mobile amethyst s610

can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:

.
im using cherry mobile amethyst s610.. i search everything in the google.. nothing happens..

How to Root and install CWM
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck

yuwishinu said:
I'm also using Cherry Mobile amethyst and i already rooted and installed CWM recovery. I'm going to teach u how to do that. but i used the ROM Manager Pro to go to the Recovery Mode.
1. You have to Root your android phone using Framaroot (Latest version) and you have to download and install the ROM Manager Pro.
Note: Warranty Void
http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276 from: alephzain
- Just click the word "Barahir" and wait for the confirmation successfully rooted and reboot your phone.
2. After That, You need to Download the "MTK Droid Tools" , "SP Flash Tools" and MTK Driver. (Search the net for Download)
-install the MTK Driver, Wait for the automatic detection of the device and Click manual install then go to downloaded drivers.
3.Open MTK Droid Tools, then wait to process the Phone Information. You have to Click the "BLOCKS MAP" and after the other window Pop-up with Block Info, Click "SCATTER FILE". This File should be save because it is very important for your device with the name "MT6572_Android_scatter_emmc.txt". Do not Close the MTK Droid Tool.
4. Open the SP Flash Tool, Click "Scatter-Loading" and search the file that you saved earlier with the name "MT6572_Android_scatter_emmc.txt" and Go to "READ BACK TAB". Click "ADD" and the file added at the bottom and Click the File and save it as "ROM_0". You should turn off your Phone. Then Connect it to USB Cable, Unplug the battery first then Click the "Read back Button" and Plug the battery to detect the device and this will be done successfully. You do have "ROM_0" File. DOnt Close SP Flash Tool.
5. Go back to MTK Droid Tools, you can now backup you phone first.Go to "root, backup, recovery" tab, Click "To Process File ROM_* from flash Tool" and select the "ROM_0" you saved earlier. Wait for the task to complete, When the message box appear "Do you want cwm automatically installed", just click "YES".
(Do it with your own Risk, Note: I am not responsible for any Damage, Lost of your data, The Process of flashing will reset your phone into factory reset or it can brick your phone when the procedure is wrong.)
6. After that you can re-flash your stock ROM.Go to SP Flash Tool Again, Then Click Again the "Scatter-Loading" and go to the MTK Droid Tool" Folder named "backup", you will see the backup file you saved a while ago when you process the "ROM_0" File. Open The Folder with the name "S610_******_backup" or "S610_******_ForFlashtoolFromReadBack", you will see the file "MT6572_Android_scatter_emmc.txt" again". after that, all the IMAGE File from your phone will appear on the bottom of SP Flash Tool, Look the name "recovery", if it has File Location, Just chage it, go to "MTK Droid Tool" Folder then open "recovery" folder, you will see the file named "S610_******__recovery_140423-203622.img" and rename it to "recovery.img".
7.Just Click the "Download" button and Unplug and Plug your battery again to detect the Phone. wait it until it done.
8. After the Process completed, Open your Device, install ROM Manager Pro, and when installation completed. Open the Application and Click Reboot into Recovery.
9. The Phone Will reboot and now go to Recovery mode
10. Goodluck
Click to expand...
Click to collapse
thanks a lot !!!!! u're such a big help!! :good:

oh yeah, i forgot.. did you boot on downloading mode or you just turn off your phone?

Help! i need stock rom for amethyst
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.

Heaven0918 said:
sr, can you up your amethyst stock rom backup,.here plsssss? im stock at boot logo,.,help plssss,., thanks,.
Click to expand...
Click to collapse
try flashing the rom again

please upload stockrom.. im on bootloop no cwm recovery yet.. huhuhuhu

please need stock rom for amethyst im in boot loop too :crying::crying::crying::crying::crying:

thread: [q] cherry mobile amethyst s610 Logged in as shield89 Image Verification
balot.ko said:
try flashing the rom again
Click to expand...
Click to collapse
what is the shortcut keys for recovery mode? you can't do it if hangups to boot logo...

balot.ko said:
can some1 tell me how to boot on recovery mode? pls tell me.. pls pls pls pls i want to install clockwerkmod thanks in advance :good:
Click to expand...
Click to collapse
mobile uncle tool po tas recovery.img po.. pag mag CWM.. )

Volume up+Powerbutton (hold) saksak mo Charger, wait.

[STOCK V3] Link And Installation Guide for A117 STOCK V3 ROM

Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON

checksum
PiyushGupta said:
Links for
1. The Stock V3 is:
https://docs.google.com/uc?id=0B74b7RoIPJyfcVJKSzAtQUM5Q0k&export=download
2. SP Tool for A117 is:
http://d-h.st/tvi
3. USB Driver For A117 is:
http://www.mediafire.com/download/e6c4j3d8j6c5ui3/MTK+Universal+Drivers.rar
to Flash STOCK V3 with SP tool... follow the guide:
1. Download Flash Tool , Stock ROM AND USB Driver From Above LINK
2. Now install SP Tool drvers. see: http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
3. NOW Create Folder IN Desktop Give It Name "FLASH"
4. Copy All Downloaded File In Recently Created Folder "FLASH"
5. Extract 'SP_Flash_Tool_v3.1304.0.119.rar' AND Also Extract Stock ROM File
6. NOW Open SP Flash Tools Folder AND Double Click ON "Flashtool.exe"
7. In Flashtool..Click On SCATTER-LOADING(FOUND IN RIGHT-SIDE) AND Select SCATTER File From STOCK ROM'S Folder
8. Flashtool Automatic Select All IMGs AND FILEs
9. NOW Completely Turn Off Your Phone
10. In Flashtool..Click On "DOWNLOAD" Button
11. Install USB Driver AND Connect Your Device To Computer
12. If Everything Is Right Then Process Will Start...Wait Till All Progress Completion
13. After All Process "GREEN CIRCLE" Appear In Center..
14. DISCONNECT PHONE AND POWER ON...THAT'S ALL
[instructions by Krunal32 and Rht555]
thats all.... enjoy
and if it helps.. PRESS THE THANKS BUTTON
Click to expand...
Click to collapse
Hi,
Thanks for sharing. What's the valid checksum of Stock V3 ROM?

Checksum for STOCK V3
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.

Checksum for STOCK V3
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
Thanks.

Drivers please help.
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.

abhishekmaha said:
Please help me install the drivers.
I'm running Windows 8.1 and my phone is not being recognized.
I've followed all the steps properly but I'm not getting the phone to even show up on the device manager. SP tools refusing to detect. Thoroughly frustrated and wasted 3 days on this.
Click to expand...
Click to collapse
Use only latest sp flash tool.

But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.

abhishekmaha said:
But I did! Still not recognizing. Nothing's happening, and no yellow bar is coming.. I downloaded the latest version of sptools, tried about 6 different versions of drivers, but my phone is not visible even as an unknown device on the device manager.
Click to expand...
Click to collapse
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help

PiyushGupta said:
Yo!!
well all the things worked properly for me as well as for another users..
soo @abhishekmaha did you installed the drivers from the given link or from any other source??
i insist you to download and install the drivers from here:
http://forum.xda-developers.com/canvas-magnus/general/install-usb-drivers-sp-tools-magnus-a117-t2705967
Try it and then let me know.
i'll always be happy to help
Click to expand...
Click to collapse
ROM File size is 900 MB !1 Is it the right file ?

Download Error
PiyushGupta said:
Checksum is [ed2c00354eb7a6d0d080453574e91b42]
enjoy.
Click to expand...
Click to collapse
I tried to download this several times, but it fails at nearly 800MB. Please help.

@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.

Network Error
PiyushGupta said:
@rubenhardy
Yes this is the Right file..
Dont worry it's checked by me and other users too.
@Myanju
No download error cuz of the link..
there may be some problem with you system or network..
you can see the screenshot about the successful download.
Click to expand...
Click to collapse
Hi,
I have attached screen shot of what i faced. please look into this and let me know what actions i should take.

Use IDM or some other downloder

Hi..
what are the features of stock v3.
does it mean kernal version
pls help
---------- Post added at 06:46 AM ---------- Previous post was at 06:39 AM ----------
what are its features....

Emergency calls only problem
HI there , firstly there was problem for invalid IMEI, i got it resolved by flashing sec_ro file again. but now its showing emergency calls only. my phone is able to detect SIM card but showing emergency calls only.
is there any modem patch that can help.
pls help.:crying:

[Guide] How To Flash Stock Rom Using SP Flash Tool.

Here i am presenting the easy method how to flash stock rom by using SP flash tool
Recommendation :-
1. PC with installed USB Drivers
2. SP Flashtool herehttps://drive.google.com/file/d/0B-0BFYGPDi0YcWpNOE90a216enM/view?usp=sharing
Procedure :-
1. Download And Install USB drivers On Your Computer In Case of Already Installed skip this Step.
2. Power off your android smart phone and remove the battery.
3. download the STOCK ROM and extract on your PC.
4. also extract the SP Flash tool and Open ' Flash Tool exe"
5. Once the Flash tool is Launched click on "download"
6. After click on "scatter loading File" Tab.
7. Locate the "Scatter.txt" location in Which U can extract Your stock rom.
8. NOW,click on "DOWNLOAD" Tab.
9. Connect Your Computer By Using Data cable without battery
10. IN some micromax mobiles Tool will start To download without battery.
BUT, in some mobiles like my KARBONN TITANIUM S5 ULTRA Device Download will start After insert the Battery.
So, please kindly note this step.
11. Congratulation U Can successfully flash your STOCK ROM.
Kip Mind,
[SIZE=''3"] 1. The following steps are works only the stock and custom rom which comes with the scatter file.
2. please, full Backup your Device through stock or custom recovery.
3. This backup will helps to recover your IMEI.
4. In case of lost IMEI Restore previous Backup.
[/SIZE]
Credits:-
shubham shahu .
Hit thankx If u Like my Work :good:

After flashing with splash tool phone dead

http://i.imgur.com/oAnHl76.jpg
http://i.imgur.com/sIZo0Hc.jpg
I downloaded the program SP_Flash_Tool_by_LG_v10c from 4PDA- , after flashing the phone fell into the boot lop.Keksik - member his program, sent me another scaterr file in which preloader, but after flashing him my phone is 100% dead Computer recognize the phone, but I can make a scatter file because MTK droid tools do not recognize the phone .To me need somebody make me a scatter file with files that must be because we splash tool ejects this in both cases when I pick scatter file,How I return phone did know somebody?
http://i.imgur.com/wRDeZZO.jpg with scatter in program
http://i.imgur.com/Vgkw0H2.jpg with cecond scatter
http://i.imgur.com/oxp4d5u.jpg without preloader
http://i.imgur.com/JiDhsxR.jpg with preloader
http://i.imgur.com/7x0g8XK.jpg from program and scatter in program
http://i.imgur.com/32DPkoR.jpg try format with second scatte

You should to flash with original d335_20c and lg flash tool.
I had the same problem and was trying to solve it within week

He is been original but for Kit Kat ,but phone be on Lollipop 5.0.2 .Keksik made program with splash toll ,then send me another scatter file and splash toll ejest error from then my phone is dead.Need scatter file for files which needs and I think phone return, because pc regognaize,splash tool same .

dejanxxxx said:
He is been original but for Kit Kat ,but phone be on Lollipop 5.0.2 .Keksik made program with splash toll ,then send me another scatter file and splash toll ejest error from then my phone is dead.Need scatter file for files which needs and I think phone return, because pc regognaize,splash tool same .
Click to expand...
Click to collapse
I sent you my scatter file in private messages
You should to flash all images without preloader and nvram
After that download v20c firmware and flash it via lg flash tool

Ok thanks you should know that only MTK drivers I see in device menager , else I dont. Ok without preloader i nvram.Did I must special splash toll I mean on version?