[Q] system update after ne5 - Sprint Galaxy S 5 Q&A, Help & Troubleshooting

Since the NE5 update, I constant have the system update notifier in status bar.... it's a circle with a check mark
If I pulled down the bar the notification says " system update....please wait..."
Anyone know how to get rid of it?

System Update Removal
bigred97 said:
Since the NE5 update, I constant have the system update notifier in status bar.... it's a circle with a check mark
If I pulled down the bar the notification says " system update....please wait..."
Anyone know how to get rid of it?
Click to expand...
Click to collapse
This is Tdunham's MOD, he is a genius! Make sure to say thanks, http://forum.xda-developers.com/showpost.php?p=53693632&postcount=301&nocache=1&z=7950310313608497

Worked awesome ! Thanks

System Update Removal
bigred97 said:
Worked awesome ! Thanks
Click to expand...
Click to collapse
Lol no prob theres a thanks button just so u know not sure if ya know, hit it for tdunham, bottom of everypost has it, hack on!

Related

[Q] Help removing OTA update notification after manual update [resolved]

I manually updated from ASUS website (using the 5/1 software) and am still receiving the OTA notification in the system bar. Is there an easy way to remove this? Is there a file on the device that I need to delete? I already deleted the ASUS folder from the micro SD card that contained the update.
Thanks
EDIT: I went ahead and tried to update and it told me that the update failed. It then told me it was going to revert to blah blah blah, which basically did nothing and then went back to the home screen. This may only work if you have the same exact version that the system is trying to update to. After accepting the failed update notice, the notification went away.
What I did was clear cache and tried to run the update. It failed and the notification went away. This was however after I rooted and installed clockworkmod.
Sent from my ADR6400L using Tapatalk
tineras said:
I manually updated from ASUS website (using the 5/1 software) and am still receiving the OTA notification in the system bar. Is there an easy way to remove this? Is there a file on the device that I need to delete? I already deleted the ASUS folder from the micro SD card that contained the update.
Thanks
Click to expand...
Click to collapse
+1 I have this as well.
if u run it it will more than liekely fail and the notif wil go away
JMQUINT00 said:
if u run it it will more than liekely fail and the notif wil go away
Click to expand...
Click to collapse
Normally I would, but I don't want to be the guinea pig when there is such a limited supply. If something get's screwed up, I may have to wait weeks to get a replacement.
EDIT: That is exactly what happened. I updated my first post and the title.

[Q] System firmware update problem.

Hi Guys,
Running the latest stock firmware here, but when I click on the system firmware update option, check update is greyed out and I'm told "There is a system firmware update for your device. Please check notifications."
Well there is no notification and I am running the latest firmware..... Is this a bug? Anyone else have this?
Ta
Paul
Hmm I assume by the lack of replies it's just me. I've tried plugging into my dock to see if that was the issue, but alas the same problem persists.
The notification is a little triangle in the status bar. It's not the most obvious icon.
Lastly, if you can download the update, you can rename it to update.zip and maybe flash it through recovery.
Mr Paul said:
Hi Guys,
Running the latest stock firmware here, but when I click on the system firmware update option, check update is greyed out and I'm told "There is a system firmware update for your device. Please check notifications."
Well there is no notification and I am running the latest firmware..... Is this a bug? Anyone else have this?
Ta
Paul
Click to expand...
Click to collapse
Ive gotten the notification recently but im on a rooted tf. when i click it, it just dissapears and nothing downloads or anything. Seems like a bug because im also on the latest firmware, even if it is the Prime rom. Plus only 2 or 3 ppl have reported it.
gee one said:
The notification is a little triangle in the status bar. It's not the most obvious icon.
Lastly, if you can download the update, you can rename it to update.zip and maybe flash it through recovery.
Click to expand...
Click to collapse
There is no notification, I have the latest firmware already installed.
Sorry, my reading comprehension was below par. I understand the issue now. Try going into Settings/Applications/Manage Applications/All. Find DMClient and hit the clear data button.
gee one said:
Sorry, my reading comprehension was below par. I understand the issue now. Try going into Settings/Applications/Manage Applications/All. Find DMClient and hit the clear data button.
Click to expand...
Click to collapse
Ok will have a go, thanks. What does the DMClient do?
Mr Paul said:
Ok will have a go, thanks. What does the DMClient do?
Click to expand...
Click to collapse
That's the file responsible for firmware update. If u are rooted, u can use titanium backup to freeze the file to stop the system from checking for and notifying of updates
Sent from my HTC Inspire 4G using XDA App
gee one said:
Sorry, my reading comprehension was below par. I understand the issue now. Try going into Settings/Applications/Manage Applications/All. Find DMClient and hit the clear data button.
Click to expand...
Click to collapse
Worked great, thanks matey
cavsoldier19d said:
That's the file responsible for firmware update. If u are rooted, u can use titanium backup to freeze the file to stop the system from checking for and notifying of updates
Sent from my HTC Inspire 4G using XDA App
Click to expand...
Click to collapse
Ta mate, I understand now.
Thanks for this --- had to Google to find this thread because a lot of people don't seem to mention it, so it must be a problem that isn't very widely spread.
I was wondering why I hadn't gotten an update since September! Finally, abnormal battery drain solved! Wooo
Clearing the data for the DMClient when the system says an update is available but has no actual notification to hit, should be added to the troubleshooting thread as a fix.
Many thanks for this tip !!!
I have the same problem but your advice doesn't work ;/
My transformer was rooted but now i have stock fw WW V8.6.5.21
My wersion is 3g B90 any idea what is wrong and i don't update my Eee Pad?

[Q] delate downloaded Software update

hi
I downloaded a software update accidently on my rooted 8013 now it keeps reminding me about installing the update
how to remove the notification forever I can remove it by pressing the home button but as soon as I Connectto a Wifi it reminds me again.
To don't want an update if it will remove the root until Jellybean is out (is there a leakedJellybean for 8013UEALGB?)
I rooted using the1st Method in this thread:
http://forum.xda-developers.com/showthread.php?t=1831152
and by mistake I installed the update (same as the one I am getting now ) and it ruined every thin took ME SOM time to fiX it and now I have 2 binary counts for some reason, I think this happened after I Flashed a kernal its not that important but how do I remove the binary count and is there a
Stock UEALGB Firmware? I searched around I couldn't find
If I well understand use Triangleaway from here http://forum.xda-developers.com/showthr ... ?t=1494114 ).
hokuto34 said:
If I well understand use Triangleaway from here http://forum.xda-developers.com/showthr ... ?t=1494114 ).
Click to expand...
Click to collapse
thanks but apparently using that program has the risk of bricking My device I don't wanna risk it Over something not important
but Whats Important is the Software update notification that I wanna remove
You have the same chance of bricking your device by using ODIN to flash your tab...
ultramag69 said:
You have the same chance of bricking your device by using ODIN to flash your tab...
Click to expand...
Click to collapse
Yes i know that....but its about the level of importance the only thing i want so badly is to remove the software update notification
Where is the update downloaded before installing??
why didn't anyone answer his question? i want to remove firmware update from my tablet, 400mb is a lot of dats to loose iIm glad It was not More!
dont worry triangleway works like charm, other way is root it manually search for it delete and disable automatic updates in settings
samir_a said:
dont worry triangleway works like charm, other way is root it manually search for it delete and disable automatic updates in settings
Click to expand...
Click to collapse
I don't know Where to search for It (a filename would be great) also how do you disable the update notfication so it dosn't download the update again? what is the process called in the app task manager so i can disable, i wish there was a option so that you are never notfied again.
also there is no option to disable auto updates in settings (on ics anyway)

Constant system updates?

My sensation is telling me there is a system update every single day!!! its been going on for weeks now and it's doing my nut in. I've been updating it everyday.
Any reason for this?
Can you upload OTA screenshot?
exxeHR said:
Can you upload OTA screenshot?
Click to expand...
Click to collapse
Sorry mate, what's OTA?
it is update OverTheAir...
Can you post update message?
Btw, are you running custom rom or full stock?
It's just the update that pops up in the top left hand corner. 'A system update is available.. would you like to download the following system software update?
update: system enhancement 60.48mb
blah blah blah
i'm not sure if it always says that update, as i've never took much notice of this message in the past, i just click download
jonbaker76 said:
It's just the update that pops up in the top left hand corner. 'A system update is available.. would you like to download the following system software update?
update: system enhancement 60.48mb
blah blah blah
i'm not sure if it always says that update, as i've never took much notice of this message in the past, i just click download
Click to expand...
Click to collapse
Hi,
Does clicking "Download" actually install it?
You could just be looping every day.
You may have several downloads somewhere on your phone.
Maybe, you have to find them and click on one to actually install it.
Just in case you're not aware, even though you get the notifications the update will only actually download if you are connected to wifi

[SM-G935P] Root(ENG)+WiFi Calling (RA1)

Check Post #593 about WiFi Calling.
-------------------------------------------------------------------------------------------------------------------------------------------​Thanks to all these amazing members for their contributions and insight.
// @Chainfire @jrkruse @princecomsy @Debuffer @zhuhang @colormedroid @Soooperstar @joedaddyoo @Araltd @Goongydin @jtash01 @izzibew26 @radink @Mast3rZero @YMNDLZ @Supermav \\​-------------------------------------------------------------------------------------------------------------------------------------------
Root SM-G935P
Version G935PVPS5BRA1/G935PSPT5BRA1
----------------------------------
Before these steps, make sure USB Debugging is ON & Verify apps via USB is OFF in Developer Options.
Backup your device before making any changes/apply root. I am not responsible for damages.
Clear CACHE using [Volume Up + Home + Power] before this process and applying firmware.
----------------------------------
Stock Firmware
(Not necessary to DL if on current firmware RA1)
Download current firmware using SamFirm
Run .exe as Administrator and use SM-G935P for Model, SPR for region. Check Auto tab then click Check Update.
Once version appears on top right, click download.
Or you can download from HERE
To apply this firmware, use ODIN in download mode and apply BL,AP,CP,CSC (extracted from zip) to each designated slot.
Use HOME_CSC in CSC slot if you want to keep your settings/files.
(Currently uploading latest firmware to my database for a faster DL)
​STEP ONE
-Download/Buy Package Disabler Pro + PD Plugin Engine from app store or install apks.
-Open PDP and insert this xml file to disable needed apps for root.
Link > HERE
STEP TWO
-Turn off phone into Download Mode (Volume Down + Home + Power)
-Connect device to PC and open ODIN(Administrator).
Link > HERE
ODIN v3.13 (patched) @realbbb
Link > HERE
-Click (AP) Slot and insert Eng Boot file.
Link > HERE
-Press Start & Device will reboot.
@JUSMEJOSE @jrkruse [Eng Boot]
-Change or add these strings below to your current build.prop in /system/ folder using a file explorer & text editor:
ro.characterisitics=Sprint
ro.telephony.default_network=10
ro.cdma.default_numeric=310120
ro.cdma.default_alpha=Sprint
ro.cdma.home.operator.alpha=Sprint
^--Status Bar String--^
Can be changed to your liking.
(Save build.prop file with permissions Read-Only)
STEP THREE
-Once Device is registered on computer/appears on your drive,
Run root.bat (extracted from SuperSU[2.82]RA1+WiFiCalling.zip)
Link > HERE
-Follow instructions and leave device connected. Don't interrupt process.
DEVICE will reboot once after removal of any previous lockscreen/fingerprints/settings.
Final reboot will occur after installaing SuperSu,Flashfire,& planting su.img into device's system.
All Done!
Thanks for these threads that helped me acquire root for Nougat.
(Outdated)
https://forum.xda-developers.com/sprint-s7-edge/how-to/root-t3410424
https://forum.xda-developers.com/sprint-s7-edge/how-to/root-pk1-lte-voice-mms-hotspot-t3557218
https://forum.xda-developers.com/sp...w-to-root-g935p-bootloader-4-pj2-pk1-t3534613​
Love the walkthrough style. Thanks for writing this up.
Taking the dive later this week, I have been missing root since moving to QAA. I will try to update over the weekend.
Worked!
Everything worked like a charm. I was already on nougat. followed instructions from step 2 and everything is working. I did have to run root.bat twice to get supersu app to show up, but it was already stated in directions which helped greatly for me not to freak out at that point lol. Anyways as i stated it worked like a charm and anyone on the fence if you rooted before you will be able to do this for sure. Once again thank you very much good sir!
Thanks for the root method I have been waiting for something to come out can't wait to try.
And just a heads up it is frowned upon on XDA to share paid apps.
About to attempt, will post results
How is it running? Smooth? hot?
izzibew26 said:
Love the walkthrough style. Thanks for writing this up.
Click to expand...
Click to collapse
Thank you, that feels good. Good luck if you try to root!
Whentheworldends said:
Taking the dive later this week, I have been missing root since moving to QAA. I will try to update over the weekend.
Click to expand...
Click to collapse
It isn't hard, just have to be careful. I messed up so many times idk how many times I've had to flash stock img. Let me know what happens.
danweb66 said:
Everything worked like a charm. I was already on nougat. followed instructions from step 2 and everything is working. I did have to run root.bat twice to get supersu app to show up, but it was already stated in directions which helped greatly for me not to freak out at that point lol. Anyways as i stated it worked like a charm and anyone on the fence if you rooted before you will be able to do this for sure. Once again thank you very much good sir!
Click to expand...
Click to collapse
Awesome. You're welcome, glad it worked. Yea SuperSU is tricky and can be interferred with easily. Keep me posted of anything good or bad please. Have fun.
Josephigloe said:
Thanks for the root method I have been waiting for something to come out can't wait to try.
And just a heads up it is frowned upon on XDA to share paid apps.
Click to expand...
Click to collapse
Dont rush it. Take your time, and i wasn't sharing paid apks i was showing the play store where you can buy it. Good luck dude!
golpeen420 said:
About to attempt, will post results
Click to expand...
Click to collapse
You can dooooo it!
radink said:
How is it running? Smooth? hot?
Click to expand...
Click to collapse
Its smooth and fast but i ran into a problem. Somehow knox got enabled and my volume up button is prevented from security policy. Im going to look into it when im not working.
godpowerrr said:
Its smooth and fast but i ran into a problem. Somehow knox got enabled and my volume up button is prevented from security policy. Im going to look into it when im not working.
Click to expand...
Click to collapse
Thanks for the work! But not sure what you mean here. Are you saying Knox was tripped? And you cant use volume up when adjusting volume?
ryan2202 said:
Thanks for the work! But not sure what you mean here. Are you saying Knox was tripped? And you cant use volume up when adjusting volume?
Click to expand...
Click to collapse
Im guessing its a package i disabled or didn't disable so it will take a bit to sort out. Its no biggie i might need to reroot. I can still raise the volume if i press volume down and move the slider. This is the only minor problem I've seen.
Does anyone know where I can find the nougat firmware? Trying to start fresh after a not successful root. Thanks
stuckintheskull said:
Does anyone know where I can find the nougat firmware? Trying to start fresh after a not successful root. Thanks
Click to expand...
Click to collapse
Yes downgrade back then you'll get the nougat update then install it. Then you'll have it lol
Sent from my LGLS996 using XDA Free mobile app
Son Rise said:
Yes downgrade back then you'll get the nougat update then install it. Then you'll have it lol
Click to expand...
Click to collapse
Didn't know I could downgrade.
godpowerrr said:
Power On. It might seem laggy at first but let it load. Check and see if everything is working BT/HotSpot/Voice/MMS. Shouldnt have to edit any APN's or anything.
Click to expand...
Click to collapse
Okay, but what if there is no data? Then what?
Worked great buddy. No issues here. Runs just as smooth for me as stock did.
99thRangernick said:
Okay, but what if there is no data? Then what?
Click to expand...
Click to collapse
If that's the case I would suggest starting over...But just data? Can you call or text? Bluetooth?Hotspot? Is there an LTE symbol in notification bar with no data? Or is it just bars with no service completely? Double check your package disabler.
izzibew26 said:
Worked great buddy. No issues here. Runs just as smooth for me as stock did.
Click to expand...
Click to collapse
Congrats. I appreciate it.
godpowerrr said:
Congrats. I appreciate it.
Click to expand...
Click to collapse
I imported your XML files for the disabled packages and attempted root. I had an error where it would take a few minutes for an app to update after downloading, do you know how to fix this?
godpowerrr said:
If that's the case I would suggest starting over...But just data? Can you call or text? Bluetooth?Hotspot? Is there an LTE symbol in notification bar with no data? Or is it just bars with no service completely? Double check your package disabler.
Click to expand...
Click to collapse
I actually completely restarted the process by reflashing back to stock with the file you linked at the beginning and just followed the process again and got it working this time. Cheers for this tutorial. :good:
YMNDLZ said:
I imported your XML files for the disabled packages and attempted root. I had an error where it would take a few minutes for an app to update after downloading, do you know how to fix this?
Click to expand...
Click to collapse
Try clearing google play store and google play services cache, if there is little cache then clear data and reenter your gmail. Youre talking about when updating in play store right? If not try only disabling these below instead [from goongydin's thread] and flash engineer. Or manually disabling from list(dont import). But once we disable these apps and flash boot img, these apps aren't supposed to change status which would mean repetitive testing. My honest answer is always going to be try from beginning again.
Bootagent
Carrier Setup Wizzard
Chameleon
Com.android.carrierconfig
MobileInstaller
SAE
Setup Wizzard
securityLogAgent
99thRangernick said:
I actually completely restarted the process by reflashing back to stock with the file you linked at the beginning and just followed the process again and got it working this time. Cheers for this tutorial. :good:
Click to expand...
Click to collapse
There you go. Its always the second time isn't it... No problem gj

Categories

Resources