I finally got Koush's Superuser manager to install, hoping that it would allow the built in superuser to activate(considering that the built in superuser is the same thing), however it doesn't manage properly. Exacting the su binary from the CM 11m8 build for bacon didn't work when manually installled. Anybody have any ideas?
And yes I've used SuperSu on it, so please don't suggest it.
Related
Hello xda! I have searched for days and have been unable to find information on how to update the su binary for cm11. I understand that Superuser app (eg. Superuser (CWM and ChainSDD) or SuperSU (Chainfire)) will update the su binary if I use that app specifically. But this is where my dilemma introduces itself. CM11 has superuser built in. I've tried using a third party app (SuperSU) and updating the binary (which was successful). I prefer the UI of the built in Superuser. So I uninstalled it. But another problem arose; every app was given permission to the SU binary without a pop-up or notification. If it is possible, how do I update the su binary or send me to where I can find more information. Thank You very much in advance.
Did you ever find out about this? I've searched for days now too.. >_<
****EDIT****
Please see http://forum.xda-developers.com/showpost.php?p=56539897&postcount=9 for the Answer
*************
Hi all ,
I'm wanting to use NowTV (like SkyGo) on my OnePlus , however they are using a type of Root check that most root hiders cannot bypass.
Therefore I'm looking for a way to temp unroot and then root back again with ease.
just wondering if there are any tools or easy to follow guides?
thanks
Disable Superuser in SuperSU settings.
zoro25 said:
Hi all ,
I'm wanting to use NowTV (like SkyGo) on my OnePlus , however they are using a type of Root check that most root hiders cannot bypass.
Therefore I'm looking for a way to temp unroot and then root back again with ease.
just wondering if there are any tools or easy to follow guides?
thanks
Click to expand...
Click to collapse
Or if you are on a Cm nightly you can turn them off in the developer option
Disabling super user doesn't work, their detection method is unknown and they check more than the su binary.
I might try the nightlies, however I need stability.
Thanks for the responses so far
Outside of the nightly wing if you want stability use the M releases, they are designed to be more stable than the nightly branch
zoro25 said:
Disabling super user doesn't work, their detection method is unknown and they check more than the su binary.
I might try the nightlies, however I need stability.
Thanks for the responses so far
Click to expand...
Click to collapse
The problem isn't really the SuperSU as such, it's CM. They flag CM as a rooted ROM, it'll even happen if you're on stock un-rooted CM11S.
Transmitted via Bacon
I'm pretty sure that I saw an xposed module that could hide superuser completely. Might want to give that a try
skyguy126 said:
I'm pretty sure that I saw an xposed module that could hide superuser completely. Might want to give that a try
Click to expand...
Click to collapse
As per my post right above yours, it isn't SU that's the problem, it's that the ROM is CM.
Transmitted via Bacon
Timmaaa is correct and that's the info I wanted, I had tried the xposed modules but none worked and now I know why.
I'll contact sky and see if I get anywhere
****EDIT****
So it seems that Timmaaa is NOT correct as there is NO CyanogenMod or any ROM check, it's all to do with the the name of your Root App
Short Version is unroot and uninstall SU app for this to work (removing SU Binary or removing Root alone is not enough)
So we need to have a new Root app with a new AppID and name , and also the SU binary to be identified as something else for this to possibly work.
I now have NOWTV working , and it's on an Unrooted One+One with no SU App installed after running full Unroot (however my SUPro app is still installed)
Note that SUPro does nothing really and just gives extra functionality when the main SU app is installed.
Thanks for everyone help and input on this.
So it seems that you would have to
1)Full UnRoot (Which also uninstalls the main SuperUser app)
2) Watch what ever you wanted to on NowTV or SkyGO
3)Go through the Rooting process again as if it were a new device. (which will again stop NOWTV/SkyGo) from working.
Do steps 1 and 2 again to watch.
This would have to be done everytime you want to watch NowTV
zoro25 said:
Timmaaa is correct and that's the info I wanted, I had tried the xposed modules but none worked and now I know why.
I'll contact sky and see if I get anywhere
****EDIT****
So it seems that Timmaaa is NOT correct as there is NO CyanogenMod or any ROM check, it's all to do with the the name of your Root App
Short Version is unroot and uninstall SU app for this to work (removing SU Binary or removing Root alone is not enough)
So we need to have a new Root app with a new AppID and name , and also the SU binary to be identified as something else for this to possibly work.
I now have NOWTV working , and it's on an Unrooted One+One with no SU App installed after running full Unroot (however my SUPro app is still installed)
Note that SUPro does nothing really and just gives extra functionality when the main SU app is installed.
Thanks for everyone help and input on this.
So it seems that you would have to
1)Full UnRoot (Which also uninstalls the main SuperUser app)
2) Watch what ever you wanted to on NowTV or SkyGO
3)Go through the Rooting process again as if it were a new device. (which will again stop NOWTV/SkyGo) from working.
Do steps 1 and 2 again to watch.
This would have to be done everytime you want to watch NowTV
Click to expand...
Click to collapse
This is just a theory... may be wrong:
Can't you move the SuperSU app into /system/app instead of /data/app. Or does the NOWTV app have perms to check the integrity of /system also. Or can you change the app id of the SuperSU app with a simple decompile tool.
I did that while using cm11s. But still had problems trying to watch skygo. In the end I had alter my buildprop to a phone which supports skygo as at the time it didn't support oneplus one. Then full unroot etc to watch then root back to get root access again.
Hey all,
Just purchased a LG U2 and now trying to make it work in the way i want it.
All informations here seem very old, so I wanted to open an update thread, with all what is possible on th lgu2, while
I found only very outdated informations...:crying:
So far:
First I setup the watch with AW2.0, after that flashed twrp 3.1.1.0 and supersu wear 2.82
I managed to get busybox installed and wanted further add Xposed.
There my problem starts, flashing xposed didn't work out.
So right after that, I switchd to Magisk root, to try work with the modules supplied.
(Steps -> use script UnSU, after that flash boot.img again, than flash MAgisk through twrp)
But after that the same with the modules. I try to install busybox, magisk tell me its no magisk module (i've downloaded the module and pushed it on the sd through adb, while the download button isn't reachable in magisk dialogue menu)
in twrp the module tells me there is no magisk installed.
so how can we go on from here? is there a way to make it all work?
did somebody try to change dpi and download the module directly through magisk? does it work?
also if somebody could help with an updated list of sideload able full android apps?
would need an email that can handle at least two accounts directly on the watch (please not advice outlook, its working from the phone i know)
thanks to all in advance
sebj84 said:
Hey all,
Just purchased a LG U2 and now trying to make it work in the way i want it.
All informations here seem very old, so I wanted to open an update thread, with all what is possible on th lgu2, while
I found only very outdated informations...:crying:
So far:
First I setup the watch with AW2.0, after that flashed twrp 3.1.1.0 and supersu wear 2.82
I managed to get busybox installed and wanted further add Xposed.
There my problem starts, flashing xposed didn't work out.
So right after that, I switchd to Magisk root, to try work with the modules supplied.
(Steps -> use script UnSU, after that flash boot.img again, than flash MAgisk through twrp)
But after that the same with the modules. I try to install busybox, magisk tell me its no magisk module (i've downloaded the module and pushed it on the sd through adb, while the download button isn't reachable in magisk dialogue menu)
in twrp the module tells me there is no magisk installed.
so how can we go on from here? is there a way to make it all work?
did somebody try to change dpi and download the module directly through magisk? does it work?
also if somebody could help with an updated list of sideload able full android apps?
would need an email that can handle at least two accounts directly on the watch (please not advice outlook, its working from the phone i know)
thanks to all in advance
Click to expand...
Click to collapse
Ok i did a fresh flash.
i see my fault was to install busybox the first time after installing supersu.
did it this time without and mgisk works so far fine. granting access for total commander no problem.
but now another thing. i installed now busybox from the repos in magisk, he say installation successful, but the module isn't there after reboot?
anyone got the same?
sebj84 said:
Ok i did a fresh flash.
i see my fault was to install busybox the first time after installing supersu.
did it this time without and mgisk works so far fine. granting access for total commander no problem.
but now another thing. i installed now busybox from the repos in magisk, he say installation successful, but the module isn't there after reboot?
anyone got the same?
Click to expand...
Click to collapse
another try. i switched back to supersu wear 2.82, installed stericsons busybox. works.
installed xposed sdk25 via twrp, says success, but after reboot xposed installer says no active framework.
i used a systemless framework... will search for the link again.
anybody got it done this way?
I was able to use Kingoroot for PC to root my Fire HD 10. Updated to the newest Firmware. It would say it was rooted. But, Trying to give permissions and checking with root checker was not successful and said there was no root. I installed SuperSU apk it says the binary is occupied. So I Uninstalled the superuser apk. that was installed by Kingoroot and tried to change the build prop with a root browser text editor and it was successful so apparently it roots but superuser is not working to grant or deny permissions. It automatically grants permissions does not even open up superuser so its kinda dangerous but it is rooted and working. My experience is that kingoroot superuser must be Uninstalled for root to work. I used twrp manager to backup my recovery img., and boot img. I am going to try to build a recovery for it but I'm not In a hurry plus I'm not sure if it will flash afterwards anyways but if you want root, Kingoroot for pc and Uninstalled the kingoroot superuser apk it installs and you will have it
Installed magisk manager installed zip direct (recommended) it bricked the fire. And then I adb sideloaded the update and now I'm back in business reasonably easy to do but I do not recommend magisk at this time .
Going to try xposed next
Couldn't get it to install says it's arm device tries to install and says it's an arm64 device. Plus has to be flashed in recovery and one hasn't been built yet
You can't manage Kingoroot su binary using SuperSU.
If you not install SuperSU su binary, SuperSU apk does not working.
Try this method to install SuperSU su binary.
https://forum.xda-developers.com/showpost.php?p=75242414&postcount=99
erono said:
You can't manage Kingoroot su binary using SuperSU.
If you not install SuperSU su binary, SuperSU apk does not working.
Try this method to install SuperSU su binary.
https://forum.xda-developers.com/showpost.php?p=75242414&postcount=99
Click to expand...
Click to collapse
I installed supersu to find out if it was rooted since the root checker said it was not. the binary error was a confirmation that it was in fact rooted and it doesn't matter what superuser is used it will not allow pop up or apps to draw over other apps so when it's rooted with kingoroot it automatically grants root without a confirmation,as long as the kingoroot super user app is not installed and if SuperSU is kept installed default permission has to be set to grant for root to work. I in fact installed the SuperSU binary through an older version of the apk and it installed but still has no control over denying or granting permissions. Thanks for the advice though. I appreciate your willingness to help me
Joker1716 said:
I was able to use Kingoroot for PC to root my Fire HD 10. Updated to the newest Firmware. It would say it was rooted. But, Trying to give permissions and checking with root checker was not successful and said there was no root. I installed SuperSU apk it says the binary is occupied. So I Uninstalled the superuser apk. that was installed by Kingoroot and tried to change the build prop with a root browser text editor and it was successful so apparently it roots but superuser is not working to grant or deny permissions. It automatically grants permissions does not even open up superuser so its kinda dangerous but it is rooted and working. My experience is that superuser must be Uninstalled for root to work. I used twrp manager to backup my recovery img., and boot img. I am going to try to build a recovery for it but I'm not In a hurry plus I'm not sure if it will flash afterwards anyways but if you want root, Kingoroot for pc and Uninstalled the superuser apk it installs and you will have it
Installed magisk manager installed zip direct (recommended) it bricked the fire. And then I adb sideloaded the update and now I'm back in business reasonably easy to do but I do not recommend magisk at this time .
Going to try xposed next
Click to expand...
Click to collapse
Not trying to insult your intelligence or anything here, but you said newest firmware? Newest Fire firmware? Newest firmware isn't rootable from my understanding.
What firmware were you on when you started the root process?
Also, are you making sure that the Kingoroot "install our extra junk" box isn't checked (not sure that would prevent root success)?
It wouldn't open superuser. superuser should be set to "grant" because of how the Fire works, which it sounds like you are aware of based on your last post. I wouldn't say it's dangerous, per se.
I've followed this guide nearly a dozen times now and I've not run into the issue(s) you're having.
smam1338 said:
Not trying to insult your intelligence or anything here, but you said newest firmware? Newest Fire firmware? Newest firmware isn't rootable from my understanding.
What firmware were you on when you started the root process?
Also, are you making sure that the Kingoroot "install our extra junk" box isn't checked (not sure that would prevent root success)?
It wouldn't open superuser. superuser should be set to "grant" because of how the Fire works, which it sounds like you are aware of based on your last post. I wouldn't say it's dangerous, per se.
I've followed this guide nearly a dozen times now and I've not run into the issue(s) you're having.
Click to expand...
Click to collapse
Prompt dialog not working in amazon fire devices.
erono said:
Prompt dialog not working in amazon fire devices.
Click to expand...
Click to collapse
Set prompt to grant and fixed.
yes. mind doesnt pop up supersu granting notification too
my fire hd 10 is on 5.6.1.0
someone told me it's amazon's own security measure
stevenchun said:
yes. mind doesnt pop up supersu granting notification too
my fire hd 10 is on 5.6.1.0
someone told me it's amazon's own security measure
Click to expand...
Click to collapse
One can try this improvement :
SuperSU access workaround for Fire devices
https://forum.xda-developers.com/hd8-hd10/general/supersu-access-workaround-fire-devices-t3738269
When I try to start Nethunter it says it needs root access, which I've granted with SuperSU. I definitely have the SU binary installed. It also says I need Busybox installed, which I do. The only thing is that it says Busybox needs to be installed in system/xbin. How would I make sure of this? I went into recovery to move it, but couldn't find such a location. I just re-flashed lineage because I was going to attempt to use Magisk, but kept having issues despite having my stock ROM installed, but I wasn't facing this issue, although it still wouldn't let me use Nethunter to install chroot. What do I need to do here? Any suggestions would be greatly appreciated.