Database Info

Root checker says I have root but apps can't gain root access.

Hello I have an unusual problem. I am modifying the ROM for my Rockchip device (rk3066). I want the firmware image to flash already rooted. I have installed busy box, su binary, and Superuser.apk. When I flash the ROM then use Rootchecker, it says I have root access. However, when I use an app that requires root it cannot gain root access. Can anyone explain to me what is going wrong?
Please be very basic in any explanation as I am a super noob trying to learn.
Thanks in advance for any help given. It will be very appreciated.

Melikey said:
Hello I have an unusual problem. I am modifying the ROM for my Rockchip device (rk3066). I want the firmware image to flash already rooted. I have installed busy box, su binary, and Superuser.apk. When I flash the ROM then use Rootchecker, it says I have root access. However, when I use an app that requires root it cannot gain root access. Can anyone explain to me what is going wrong?
Please be very basic in any explanation as I am a super noob trying to learn.
Thanks in advance for any help given. It will be very appreciated.
Click to expand...
Click to collapse
There might be something wrong with the superuser app itself. Try using SuperSU.
http://forum.xda-developers.com/showthread.php?t=1538053
Does it work?

Basically you need to tick "prompt", if you had ticked "deny for all" , superuser will not prompt you for answer when an app needs root, so have it on "prompt" in super user settings, If superuser or SU icon is in apps drawer , open it and check its settings menu.
How to get Root Access?
a) Update SU Binaries, reboot
b) Check Development Option for Root Access settings or Performance settings for Superuser Settings
c) Flash Super Su Zip in Recovery
Problems that may arise in the future : Read How To SU
Check this out! Links to useful Guides and " Banned " Documentaries ​

install supersu

So I tried updating the su binary from the superuser app. It says it installed OK but then says it can't gain root access.
I also tried using Supersu app. It says that there is no su binary installed. But, it definitely is there.
I also tried simple root checker. It verified that busy box is installed.

If you have a recovery installed unroot and reflash the binary n app
Sent from my WT19i using xda app-developers app

I appreciate all the input, but I think this is going off point. I have no trouble routing my tablet with the told that are out there. I can't build it into a complete ROM. I am trying to build a custom ROM
with the root built in.
Sent from my XT912 using Tapatalk

Root not routing / tools not told

ZTE V768 (Concord) and V768G (Midnight) Development

Currently, we only have root access on these devices. I am currently working on a recovery build, and I have plans for CM7 and CM9 builds in the future. Here's how to consistently and easily get root access on the Tracfone V768G and almost certainly V768 (I have a V768G):
Root
The only functional root exploit I have found is via an obscure Chinese program called VROOT. While there is much speculation in other threads as to the nature of this program (and potential for malware), I have had success with it on multiple occasions where no other tool I tried worked. I have seen no evidence that it installs anything other than its strange app market (as an easily-removable user app!) and a superuser program called KingRoot (as a system app, where it should be). While it appears entirely benign and functional, I personally prefer to use superSU. Therefore, the below instructions will include the removal of KingRoot and installation of SuperSU in its place. It is assumed that you have ZTE's preloaded drivers installed and that you have confirmed adb is working.
Unfortunately, VROOT is a Windows-only application, though it works perfectly in a Windows virtual machine (that's how I use it!).
Download VROOT and the newest SuperSU
Install and run VROOT. It might take more than one try to succeed.
Confirm that KingRoot is installed, and uninstall the 100% Chinese app that is also present. At this point, your device is rooted. You can simply keep KingRoot, but I would advise continuing to install superSU.
Extract "common/Superuser.apk" from the downloaded SuperSU zip and install it on the device via adb or the file manager.
Open SuperSU and grant it root permissions when KingRoot prompts you. Swipe over to the settings pane and select "Switch superuser app".
Follow its instructions. After rebooting the device, simply install SuperSU again, open it, update the su binary when prompted, and select "Install SuperSU inte /system" from the settings pane. You're done!

VROOT installs a app "Superuser.apk" not Kingroot
Hi, thanks for the info.
When I install VROOT via windows, it installs an app called 'Superuser' which I suppose it is to manage root access permissions for other apps. I see no 'KingRoot' app as you mentioned. I only see this 'Superuser' app and a Chinese app.
Either way, this 'Superuser' app appears to not working properly because I am not getting any prompt to either deny or grant root acess to apps like TitaniumBackup or even Root Checker.
I can get root acess via ADB Shell with the su command, but on the phone the 'Superuser' app from VROOT is not prompting me to allow/deny root access.
Any suggestions?? Thanks!!

abmx7 said:
Hi, thanks for the info.
When I install VROOT via windows, it installs an app called 'Superuser' which I suppose it is to manage root access permissions for other apps. I see no 'KingRoot' app as you mentioned. I only see this 'Superuser' app and a Chinese app.
Either way, this 'Superuser' app appears to not working properly because I am not getting any prompt to either deny or grant root acess to apps like TitaniumBackup or even Root Checker.
I can get root acess via ADB Shell with the su command, but on the phone the 'Superuser' app from VROOT is not prompting me to allow/deny root access.
Any suggestions?? Thanks!!
Click to expand...
Click to collapse
I was working on getting a custom recovery,but then I ended up getting a Nexus 4 (and then later a nexus 5) and abandoned it. Ill take another look at it. Now that I dont need the phone its less of an issue if I brick it,so I can be a little more agressive.
Try this thread. This is what worked for my V768
http://forum.xda-developers.com/showthread.php?t=2217810

pflatlyne said:
I was working on getting a custom recovery,but then I ended up getting a Nexus 4 (and then later a nexus 5) and abandoned it. Ill take another look at it. Now that I dont need the phone its less of an issue if I brick it,so I can be a little more agressive.
Try this thread. This is what worked for my V768
http://forum.xda-developers.com/showthread.php?t=2217810
Click to expand...
Click to collapse
anything i can help with getting a recovery working?

ultravioletnanokitty said:
Currently, we only have root access on these devices. I am currently working on a recovery build, and I have plans for CM7 and CM9 builds in the future. Here's how to consistently and easily get root access on the Tracfone V768G and almost certainly V768 (I have a V768G):
Root
The only functional root exploit I have found is via an obscure Chinese program called VROOT. While there is much speculation in other threads as to the nature of this program (and potential for malware), I have had success with it on multiple occasions where no other tool I tried worked. I have seen no evidence that it installs anything other than its strange app market (as an easily-removable user app!) and a superuser program called KingRoot (as a system app, where it should be). While it appears entirely benign and functional, I personally prefer to use superSU. Therefore, the below instructions will include the removal of KingRoot and installation of SuperSU in its place. It is assumed that you have ZTE's preloaded drivers installed and that you have confirmed adb is working.
Unfortunately, VROOT is a Windows-only application, though it works perfectly in a Windows virtual machine (that's how I use it!).
Download VROOT and the newest SuperSU
Install and run VROOT. It might take more than one try to succeed.
Confirm that KingRoot is installed, and uninstall the 100% Chinese app that is also present. At this point, your device is rooted. You can simply keep KingRoot, but I would advise continuing to install superSU.
Extract "common/Superuser.apk" from the downloaded SuperSU zip and install it on the device via adb or the file manager.
Open SuperSU and grant it root permissions when KingRoot prompts you. Swipe over to the settings pane and select "Switch superuser app".
Follow its instructions. After rebooting the device, simply install SuperSU again, open it, update the su binary when prompted, and select "Install SuperSU inte /system" from the settings pane. You're done!
Click to expand...
Click to collapse
Edit: was able to root with kingoroot my bad.

i need a custom recovery for it please

replace kinguser with supersu

somebody could teach me the easiest way to replace kinguser with supersu please?

dewagame said:
somebody could teach me the easiest way to replace kinguser with supersu please?
Click to expand...
Click to collapse
Follow these simple steps:
1. Go to the Play Store and install SuperSU.
2. When SuperSU is installed, give it permission as Super User.
3. Uninstall KingUser.
4. Done.

ИΘΘK¡€ said:
Follow these simple steps:
1. Go to the Play Store and install SuperSU.
2. When SuperSU is installed, give it permission as Super User.
3. Uninstall KingUser.
4. Done.
Click to expand...
Click to collapse
hI! I try on my HUAWEI ASCEND G6 and... dont work ... is possibel that an update that Kinguser had done make it impossibel?????
I root with RootGenius_en, was ok, kinguser ask for a update, done. But Now i whant to change do SuperSu and dont work. I had permissions and every thing...
Help! :crying:

Me too
I'm trying to do this too, but I aint sure how to do it. I mean I guess if its not super necessary I can leave it the way it is. Tried this method and its a no go. I don't think the KingUser SU is letting superSU update its binaries. I already have twrp, but not sure what next. If its not necessary I'll leave it alone, but I was just wondering if theres any reason to change over or if it could even be done.
P.S This way never worked for me as superSU can't get past trying to install the binaries. I got twrp so I'm wondering if I'd have to flash it. Nothings wrong on my end are anything, but I just assumed having superSU would be better then kinguser but not really sure.

many people have this problem.
first of all, kinguser is great to root the G6, and in most cases the only working method without custom recovery,
but because it flashes kinguser.apk as system app you can't uninstall it the normal way.
the solution is to flash supersu.zip and then uninstall kinguser. this way supersu will be your systemapp.
find the files and tutorials you need on our facebook group,
we have 1500+ members, CWM + TWRP, android 4.3 + 4.4, we can root your g6 and unlock your bootloader.
but we still don't have a subforum on XDA....
https://www.facebook.com/groups/328261053999820

Must vary from device to device cause I've did all that, and it gives the message "Installing Please wait..." and then after it fails it says " Installation Failed! Please reboot and try again" and if kinguser is removed in superSU when trying to update/install the binaries it says "There is no SU binary installed, and SuperSU cannot install it. This is a problem! If just upgraded to Android 4.3 you need to manually re-root- consult the relevant forums for your device."
This aint the g6 though but this thread is the kinguser replace with superSU thread. So I thought I'd post in it.
washichi said:
many people have this problem.
first of all, kinguser is great to root the G6, and in most cases the only working method without custom recovery,
but because it flashes kinguser.apk as system app you can't uninstall it the normal way.
the solution is to flash supersu.zip and then uninstall kinguser. this way supersu will be your systemapp.
find the files and tutorials you need on our facebook group,
we have 1500+ members, CWM + TWRP, android 4.3 + 4.4, we can root your g6 and unlock your bootloader.
but we still don't have a subforum on XDA....
https://www.facebook.com/groups/328261053999820
Click to expand...
Click to collapse

Install SuperSu rom magazin play.
Then instal rom lite box.
Open the app, and uninstall kinguser
easy, and it`s working.I just deleted kinguser 2 mins ago

Hum
@andruala Never worked for me that way, anytime I remove king user root gets removed. Never was able to flash superSU rom correctly because binaries couldn't get updated from superSU because root was removed once king user was uninstalled. I've heard people mention it working the way you suggested, but I've also read posts where people have a hard time getting it replaced with superSU because root gets removed when king user is replaced, which doesn't allow superSU to install the binaries correctly. Most people probably can't get the binaries installed correctly from superSU which is the same problem I had so they end up just leaving it king user. I could try whats suggested here but I very much doubt its going to work as explained from my conflict that when king user is removed, root is removed and whether you flash a SU zip or not root still aint enabled because SU binaries are nt installed correctly. So until I actually can confirm this works myself I'm gonna prob say its a no-go for me. Could be device specific but I did all this to a tee and still had problems. There was a post on freak tab where someone had the same problem. I might still try this, I just dont see it working like as said.

freestilesteve said:
@andruala Never worked for me that way, anytime I remove king user root gets removed. Never was able to flash superSU rom correctly because binaries couldn't get updated from superSU because root was removed once king user was uninstalled. I've heard people mention it working the way you suggested, but I've also read posts where people have a hard time getting it replaced with superSU because root gets removed when king user is replaced, which doesn't allow superSU to install the binaries correctly. Most people probably can't get the binaries installed correctly from superSU which is the same problem I had so they end up just leaving it king user. I could try whats suggested here but I very much doubt its going to work as explained from my conflict that when king user is removed, root is removed and whether you flash a SU zip or not root still aint enabled because SU binaries are nt installed correctly. So until I actually can confirm this works myself I'm gonna prob say its a no-go for me. Could be device specific but I did all this to a tee and still had problems. There was a post on freak tab where someone had the same problem. I might still try this, I just dont see it working like as said.
Click to expand...
Click to collapse
Yes...i`m really sorry.For me wit worked before i restarted the phone...
After de restart i`ve seen that the root is not working anymore...
Sorry for my bad.

No worries bro. Probably varies depending on how you root from device to device.
Its not your fault. No worries. I'm just thinking it varies from device to device and how you actually go about rooting . I'm also thinking that maybe if I rooted with another app/prog that it would have been easier to switch from king user to superSU. I use lookout premium security on my phone and kingroot and king user have never been flagged with any viruses so I've just left it on and running the way it is and so far so good. Other then the two errors I mentioned in the previous post king user/kingroot has been working good. I'm sure if I did a whole restore/wipe/clean and root with another program there might be a possibility to remove king user and replace with superSU but in the end I just decided to roll with king user/kingroot as I didn't feel like doing al that and its been doing its job fine.
QUOTE=andruala;58880236]Yes...i`m really sorry.For me wit worked before i restarted the phone...
After de restart i`ve seen that the root is not working anymore...
Sorry for my bad.[/QUOTE]

Well I thought about leaving kinguser sitting there on my system too until one day I installed network monitor stuff and noticed kinguser sure likes to make HTTP connections every time the Internet is available. Imagine that. Also have a look, there are /system/bin/.usr/.ku etc. hiding all over your system.

The earlier versions of Kingo Root were much better
jidanni said:
Well I thought about leaving kinguser sitting there on my system too until one day I installed network monitor stuff and noticed kinguser sure likes to make HTTP connections every time the Internet is available. Imagine that. Also have a look, there are /system/bin/.usr/.ku etc. hiding all over your system.
Click to expand...
Click to collapse
Those earlier versions were putting SuperSU binaries into the root. But now they are putting on this King User crap. Reason I say it's crap is exactly what you mentioned. As soon as I root a phone with Kingo Root, Google Search immediately tells me that it will not allow me to search for anything because "your computer or network may be sending automated queries. To protect our users, we can't process your request right now"
Good God! What the heck is Kingo Root putting onto these phones now? It sure isn't putting just su binaries in there.

Indeed. What is needed is for someone to take a vanilla phone into a cleanroom, install the mess, and report back on exactly what ended up getting put where, in order for somebody to make a "kinguser detox/.antidote" APP and/or shell scripts that would clean the mess totally back off.

don't know if it's gonna help you ( have alcatel onetouch idol 2 mini s):
i also couldn't update binaries su and had kinguser.
then i downloaded the beta version of supersu (on xda) and flashed it with my cwm. after that when supersu asked if i wanted to update, i said yes and choose normal update (not the cwm/t... one) it than updates and asked if i wanted to remove the external root apps (ie: kinguser) and voila!
(sorry English isn't my language, so don't know if i explained myself well^^)

satine01black said:
don't know if it's gonna help you ( have alcatel onetouch idol 2 mini s):
i also couldn't update binaries su and had kinguser.
then i downloaded the beta version of supersu (on xda) and flashed it with my cwm. after that when supersu asked if i wanted to update, i said yes and choose normal update (not the cwm/t... one) it than updates and asked if i wanted to remove the external root apps (ie: kinguser) and voila!
(sorry English isn't my language, so don't know if i explained myself well^^)
Click to expand...
Click to collapse
Why did you need to root with kingo if you have custom recovery?!

I rooted first then found the cwm for my phone?

satine01black said:
I rooted first then found the cwm for my phone?
Click to expand...
Click to collapse
Oh. I wasn't angry at you Was just asking.

it took me like a year to root my phone then i couldn't make it work well with kinguser, and i wanted supersu anyway, so i found that i could install manually the app with cwm .
anyway, i don't now if you can use cwm without a root?

satine01black said:
it took me like a year to root my phone then i couldn't make it work well with kinguser, and i wanted supersu anyway, so i found that i could install manually the app with cwm .
anyway, i don't now if you can use cwm without a root?
Click to expand...
Click to collapse
You can, but it doesn't really make much sense to.

Use Eroot, then try superSU installation
CVAngelo said:
Those earlier versions were putting SuperSU binaries into the root. But now they are putting on this King User crap. Reason I say it's crap is exactly what you mentioned. As soon as I root a phone with Kingo Root, Google Search immediately tells me that it will not allow me to search for anything because "your computer or network may be sending automated queries. To protect our users, we can't process your request right now"
Good God! What the heck is Kingo Root putting onto these phones now? It sure isn't putting just su binaries in there.
Click to expand...
Click to collapse
I had the same issue with my mobile, (Sony Ericsson Xperia Ray (ST18i)), I then rooted my phone with EROOT Software which installed a superuser app, then i got the .apk file of SuperSU via Bluetooth from a friend and installed it. one has to grant permission when it asks for superuser rights, then updating binary files is no longer a problem. It also asks for removal of the Superuser-app that was pushed through the EROOT software, you do that. Then I installed link2SD and link2sd pro key from google play store and converted the SuperSU app into a system-app. Now SuperSU is working perfectly again.
You both should try it!!

[Resolved] How to Root BLU Life One 2015

Here is how to root the new BLU Life One, there are probably many ways to do it but this was the best way that I could find.
Note that I tried to root with framaroot, towelroot, and iroot and their apps have failed.
Try this of your own free will, I am not responsible for anything happening to your device (it worked for me so it should work for you).
What you will need:
kingoroot, supersu, busybox, root checker, and titanium backup.
First things first,
Go into settings and check the box next to "Unknown sources".
Next open up the internet tab and search for Kingoroot (kingorootapp dot com)
Click the download button for android (not the windows one)
When it finishes downloading, click in the drop down menu and install the apk.
Open the kingo root app, and click root circle.
After the app is finished rooting your device, you can download Root checker in the play store to ensure that your device is indeed rooted.
Now, I personally don't like kingo root, so the next steps are optional.
In the play store download three apps, SuperSU ( i use chainfire), busybox, and titanium backup (i suggest buying the paid version, it is well worth the money).
Next open up SuperSU (KingoUser should ask to grant SuperSU root access, allow it), and install the SU binary. Do not reboot system.
Next open titanium backup, click the middle tab, then scroll down until you see SuperSU. Long press, and then press install to system apps. (you can do this manually by using ES file explorer and copying the SuperSU.apk file [may need to download it from the internet] in to the/system/app folder.
Now restart your device.
When the device boots back up, check and make sure that your device is still rooted by using root checker again.
If it is still rooted, open SuperSU and make sure you dont have to install the binarys again (you shouldnt have to).
Next uninstall the kingo root app (it will not let you uninstall the kingouser app, for this you must use titanium backup)
Now go into your system, applications and then disable kingouser app.
After doing so, check and see if your device is still rooted (it should be)
If it is still rooted, proceed to use titanium backup to uninstall kingouser app.
Lastly install busy box. If you get an error saying "unable to install choose another location" simply click on where it says "/system/xbin" and change it to "system/bin".
And there you should have a freshly rooted device with no kingoroot. Not saying Kingoroot is bad, i just have always used SuperSU
Credits:
To the developers of kingoroot, supersu, busybox, root checker, and titanium backup!

ikpb said:
Here is how to root the new BLU Life One, there are probably many ways to do it but this was the best way that I could find.
Note that I tried to root with framaroot, towelroot, and iroot and their apps have failed.
Try this of your own free will, I am not responsible for anything happening to your device (it worked for me so it should work for you).
What you will need:
kingoroot, supersu, busybox, root checker, and titanium backup.
First things first,
Go into settings and check the box next to "Unknown sources".
Next open up the internet tab and search for Kingoroot (kingorootapp dot com)
Click the download button for android (not the windows one)
When it finishes downloading, click in the drop down menu and install the apk.
Open the kingo root app, and click root circle.
After the app is finished rooting your device, you can download Root checker in the play store to ensure that your device is indeed rooted.
Now, I personally don't like kingo root, so the next steps are optional.
In the play store download three apps, SuperSU ( i use chainfire), busybox, and titanium backup (i suggest buying the paid version, it is well worth the money).
Next open up SuperSU (KingoUser should ask to grant SuperSU root access, allow it), and install the SU binary. Do not reboot system.
Next open titanium backup, click the middle tab, then scroll down until you see SuperSU. Long press, and then press install to system apps. (you can do this manually by using ES file explorer and copying the SuperSU.apk file [may need to download it from the internet] in to the/system/app folder.
Now restart your device.
When the device boots back up, check and make sure that your device is still rooted by using root checker again.
If it is still rooted, open SuperSU and make sure you dont have to install the binarys again (you shouldnt have to).
Next uninstall the kingo root app (it will not let you uninstall the kingouser app, for this you must use titanium backup)
Now go into your system, applications and then disable kingouser app.
After doing so, check and see if your device is still rooted (it should be)
If it is still rooted, proceed to use titanium backup to uninstall kingouser app.
Lastly install busy box. If you get an error saying "unable to install choose another location" simply click on where it says "/system/xbin" and change it to "system/bin".
And there you should have a freshly rooted device with no kingoroot. Not saying Kingoroot is bad, i just have always used SuperSU
Credits:
To the developers of kingoroot, supersu, busybox, root checker, and titanium backup!
Click to expand...
Click to collapse
Hi, thanks for this info, works for me. You should publish this info in the official Blu Life One thread. Thanks again for this.

if someone here has a working blu life one 2015, could you do a rom dump. a bunch of us have soft bricked phones and can't get them working. Blu doesn't have the stock rom available

Hey thanks for this guide! I have one problem I'm hoping you could shed some light on. I've followed your steps and when I try to update the SU binaries it fails every time. The kingroot worked and the kingroot su asked if I wanted SuperSu to have root access and I selected yes. Each time it fails to update it suggest I reboot and try again, but I haven't yet.
Thanks again
Robert

Busybox and root checker report device not rooted...? Am using root req's apps

Unlocked bootloader. Installed twrp successfully. Flashed majisk successfully yet busybox will not install and root checker reports root not obtained... Huh?
Is this because root checker and busybox look for supersu to be in a certain place and when they can't find it they report no root?
If majisk is essentially root then why does it fail the checks? I am able to install and use apps that require root... What gives? (Sorry for being dumb)

kerryh420 said:
Unlocked bootloader. Installed twrp successfully. Flashed majisk successfully yet busybox will not install and root checker reports root not obtained... Huh?
Is this because root checker and busybox look for supersu to be in a certain place and when they can't find it they report no root?
If majisk is essentially root then why does it fail the checks? I am able to install and use apps that require root... What gives? (Sorry for being dumb)
Click to expand...
Click to collapse
IDK about the root situation, but the way I usually install busybox on the pixel is goto the play store and search busybox and pick the one by meefik. Then open it and change the install location from system/xbin to just system/bin (so remove the x)

kerryh420 said:
Unlocked bootloader. Installed twrp successfully. Flashed majisk successfully yet busybox will not install and root checker reports root not obtained... Huh?
Is this because root checker and busybox look for supersu to be in a certain place and when they can't find it they report no root?
If majisk is essentially root then why does it fail the checks? I am able to install and use apps that require root... What gives? (Sorry for being dumb)
Click to expand...
Click to collapse
This is the best BusyBox installer in my opinion.
From this thread. Works for system or systemless installations.
Flash in TWRP.