Related
Hi guys i need some help please i rooted my sgs2 gt-19100g using odin1.38 and its all work just fine but when i tried to install a rom for my devise the phone wont start on the recover mode neither downloading mode and i have an image shownc phone try to connect to pc and in the middle of the a yellow triangle
Moved to General Q&A.
DUDE u Bricked ur phone !!!
It seems u made some mistake while flashing ur ROM but dnt worry . IF u have any nanodroid backup restore it or else download any stable ROM for ur device u will find many on xda and jst get a good guide on how to flash a rom and every thing will b all right u will also need to replace ur stock recovery with CWM just search on xda "How to install CWM on ur model no "
HOPE this HELPS
PRESS THANKS PLZZ
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
try getting into recovery (vol + or - and pwr) and make a full wipe. if it will not power on, try flashing a new firmware. make sure you got the right one!
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
dewdrops said:
hey there..i need some serious help!!! my micromax a110 is not working:crying::crying: it so happened that my cell suddenly got switched off..n den when i tried to switch it on it didnt start. just the starting screen appears and then it goes dead..then again the starting screen appears and it goes dead:crying::crying::crying:..please help me!!!! someone??? anyone???
Click to expand...
Click to collapse
I think it's out of charge, just plug in the charger and see what happens..
yog12 said:
if u have cwm added then try to go to recovery n flash any custom rom of C2
if not then
Flash Stock rom using Sp tool it will Solve ur problem
Click to expand...
Click to collapse
i tried doing that but thats not working...can you please tell me the procedure?
Lets Start
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
1)Install Drivers.
2)Open SP tool
3)Select 'Android Scatter file' inside ROM folder.
4)Click Firmware->Upgrade Button.
5)Connect Phone{Switched off} to PC via USB Cable.
6If everythings right,Flashing will proceed..
7)Wait till It finishes..A green ring is displayed on completion..
8))Now Close SP tool..Remove Phone from PC..
9)Switch ON the phone...It is successfully Flashed...:laugh:
I also face same problem some time when I make Factory or DRM reset
Green Android Robo with rotating frame
Start again and again. No switch off .. No effect after remove battery..
Only 1 solution "Do flash with SP Tool"
dewdrops said:
i tried doing that but thats not working...can you please tell me the procedure?
Click to expand...
Click to collapse
Hey no worries.. just follow my dis thread 'unbrick bricked canvas 2' :thumbup:
Link: http://forum.xda-developers.com/showthread.php?t=2376667
hit thx if i helped...
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
mickeybatio said:
I cant receive and make calls after I do factory reset of my phone ....Also I get Invalid Imei when I check by *#06#...I have to go to service centre again and again to put my imei number back after every factory reset......:crying::crying::crying::crying:..Kindly tell me what to do...I have a micromax a110 canvas 2 phone
Click to expand...
Click to collapse
Those Guys out there in MMX service centre are nut xD.Okay you got your imei wiped .Its actually due to change of ur mother board.not an problem.its easy to implant it again.find ur both imei number in the packaging box .note it down in a piece of paper.now go to engineer mod and select GPRS .Choose the first sim and enter the first imei there .click write imei ---> ok , click attached--->ok ,click detached---> okay
Now repeat this for the second sim and enter the second imei.reboot the phone. Now check ur imei You can now reset your phone even for 1000 times but you have to implant it again and again every time u flash a new rom or reset
engineer mode
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
chaitu.swaroop said:
hi bro ur advice is a little bit helpfull to me, but the thing is before i've changed my ''''engineer mode > debug utils > debug level to 'user mode'. so my question is whether it should be in user mode or engineer mode. i'm asking u bcoz i am able to get into gprs but i didn't get any sim1 or sim2 option like that to follow ur previous steps. so pls guide me more clearly bcoz i'm a new beee.
my phone is showing no emie:crying:.
even one more doubt bro. eventhough i put my phone in usb debugging mode when i connected it to computer it is showing pls put ur phone in debugging enabled mode:crying::crying:. so how to overcome this problem. i'm unable to connect to pc.
pls help me
Click to expand...
Click to collapse
first select usb debuging option in developer optiion
then in eng mod go to radio wave option and put imi no
hi brother. thanks a lot for ur reply. i've tried what u said. but i'm unable to find that radio wave option. could u pls give the exact path so that it will be helpfull to me.
pls save my phone.
even though i put my phone in debugging enabled mode my pc is showing like pls put debugging mode on. this is another problem i am having right now. to root my phone i need this debugging mode enabled in pc. i've tried framaroot, z4root, z4 zte blade root, terminal emulator all the methods without pc i've tried to root my phone, but no use.
pls help me in this issue.
thanks a lot in advance :good:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Download the imei writing tool for m a110 http://support.moulnisky.com/index.php?dir=Micromax/00_A Serie/A110/Tools/
What if i do not know the IMEI nos?
very easy, back on ur phone inside d battery place
kamalahasang said:
What if i do not know the IMEI nos?
Click to expand...
Click to collapse
hi fnd u can know ur imei very easily. it is just back of ur phone. remove d battery & u can have ur both imei no.s there.:laugh::laugh:
hit thanks bcoz u know to hit as i helped u.
no luck at send failed heeeeeeeeelp please
chaitu.swaroop said:
hi brother i got a solution for my problem from addasjii a member in xda like us. thanks a lot for him & thanks for u for giving ur valuable ideas & ur valuble time for me & my posts.
the solution he has given is below
U can get ur imei no. Back...even I have faced the same Problem..just go into the engineering mode then in the connectivity column goto cds information and then to radio information and then phone 1--- type AT+EGMR=1,7,"" within the inverted comma put ur first imei no..and hit (send at command). And similarly in phone 2 type at+egmr=1,10"" and put your second imei no.and hit send at command ...then just reboot...it works...
U can find your imei no a the back where u put ur battery. With bar code the first is for phone 1 and below that for phone 2
Sent from my Micromax A110 (Canvas 2) using xda app-developers app
Click to expand...
Click to collapse
fix it plzz
xdag700 said:
fix it plzz
Click to expand...
Click to collapse
IMEI is quite easy to fix ! Use MTK Droid tools to write ur imei or S/N Write tool. There are many tutorials browse through for how to use this tool !
Flashing stock ROM through SP should solve imei. First select format in sp and then flash ROM through sp. Then after first boot take imei backup as mentioned in this thread. And replace it every time u face problem !
http://forum.xda-developers.com/mic...artition-a110q-canvas-2-t2568182/post48447661
( See only IMEI related in this thread. Leave others )
Reset IMEI of A110
Hey! I have got the same problem in my Canvas HD. What I do is:-
1. goto dialer and type *#*#3646633#*#*
2. Goto CDS information
3. Goto Radio
4. On the command bar, type AT+ EGMR, 1,7"YOUR IMEI"
5. And send command
If it says command sent, then good but if not, remove SIM and try again .
6. Reboot
Note: For SIM 1, the command is AT+ EGMR, 1,7"YOUR IMEI" but for SIM 2 it is, AT+ EGMR, 1,10"YOUR IMEI"
I hope you got the answer! :fingers-crossed: :fingers-crossed:
my frnd was gettin this error so i told him this method
everything went well but after reboot his device showing the same error again plz help
guys I need yo serios help..I rooted my fon micromax a88 sday usin root master..by tday whil I changd th font n rebooted th fon,it gt stuk at canvas..its nt movin aftr dt..guys I tries to go to recvry mod..bt its js givin a blank screen n nt goin ahed..is my fon brikd? guys pl help me n rep me ASAP..I need yo help.
Dave18392 said:
guys I need yo serios help..I rooted my fon micromax a88 sday usin root master..by tday whil I changd th font n rebooted th fon,it gt stuk at canvas..its nt movin aftr dt..guys I tries to go to recvry mod..bt its js givin a blank screen n nt goin ahed..is my fon brikd? guys pl help me n rep me ASAP..I need yo help.
Click to expand...
Click to collapse
I'll help, but I really can't understand a word you've written...
TagEHeuer said:
I'll help, but I really can't understand a word you've written...
Click to expand...
Click to collapse
c mate...i rooted my fon day before sday using a software called rootmaster...my fon model is micromax canvas a88...it is an indian brand...
so yesterday i tried to change th font of my fon usin rom toolbox...and after changin the font,they(software ppl) asked me to reboot the fon in ordr to make the changes in affect....wen i rebooted the fon,its nt moving after th canvas screen...so i went to the recovery mod but unfortunately its nt wrkin as its showin blank screen..so wat to do...its Mediatek device..MTK6577..
Dave18392 said:
c mate...i rooted my fon day before sday using a software called rootmaster...my fon model is micromax canvas a88...it is an indian brand...
so yesterday i tried to change th font of my fon usin rom toolbox...and after changin the font,they(software ppl) asked me to reboot the fon in ordr to make the changes in affect....wen i rebooted the fon,its nt moving after th canvas screen...so i went to the recovery mod but unfortunately its nt wrkin as its showin blank screen..so wat to do...its Mediatek device..MTK6577..
Click to expand...
Click to collapse
restore the phones system backup
jime1 said:
restore the phones system backup
Click to expand...
Click to collapse
hw to do it wn my fon s bootlokd n nt swichin on?
TagEHeuer said:
I'll help, but I really can't understand a word you've written...
Click to expand...
Click to collapse
pl help me mate..
anyway for me to get th stock rom for micromax a88
Dave18392 said:
hw to do it wn my fon s bootlokd n nt swichin on?
Click to expand...
Click to collapse
boot into recovery by pressing VOL UP + VOL DOWN + POWER to get into recovery mode
Dave18392 said:
pl help me mate..
anyway for me to get th stock rom for micromax a88
Click to expand...
Click to collapse
Check this link....
http://skyneel.blogspot.com/2013/06/Stock-Rom-V1-for-Micromax-A88-Canvas-Music.html
guys need a next help from u all...i did evrything as you told and now my phone isnt showing range and is sayin hat the IMEI is invalid...wat to do ??
And thanks for the previous helps..
Due to no range i cant niether cal nor reciev calls..so help me pleas.
Dave18392 said:
guys need a next help from u all...i did evrything as you told and now my phone isnt showing range and is sayin hat the IMEI is invalid...wat to do ??
And thanks for the previous helps..
Due to no range i cant niether cal nor reciev calls..so help me pleas.
Click to expand...
Click to collapse
Have You flashed stock rom?
Sent from my Explorer A310e using xda app-developers app
yes dude,...instaled it.
I flashed the stock rom and its getting switched on now...but it shows invalid IMEI and no range is coming..i gues i dont ve th back up also..
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Will this method work for micromax a88 for validating the IMEI after flashing th stock rom?
Dave18392 said:
1. Go to Engineering Mode with this code * # * # 3646633 # * # *
2. Type it on call pad
3. Engineering Mode show on your phone screen
4. Go to CDS info
5. Go to Radio info
6. then go to Phone1 (For the first IMEI No)
7. At the top there is a command line which begins "AT+" just type there "AT +EGMR=1,7,"IMEI_1" (Instead of IMEI_1 put your first IMEI No)
8. Hit send command
9. If you done just reboot the phone
10. If you change the second IMEI No then go to step 2 and select "Phone2"
11. And enter the code "AT +EGMR=1,10,"IMEI_2" (Instead of IMEI_2 put your second IMEI No)
12. Hit send command
13. Reboot your phone
Will this method work for micromax a88 for validating the IMEI after flashing th stock rom?
Click to expand...
Click to collapse
First of all .. use Quote ("REPLY) button to specify with whom you are having this conversation!
now ..where did you get the above list of 13? give me the link..
Solution: its a similar link and it should work!
http://skyneel.blogspot.com/2013/08...-IMEI-no-in-Micromax-and-other-MTK-phone.html
jime1 said:
First of all .. use Quote ("REPLY) button to specify with whom you are having this conversation!
now ..where did you get the above list of 13? give me the link..
Solution: its a similar link and it should work!
http://skyneel.blogspot.com/2013/08...-IMEI-no-in-Micromax-and-other-MTK-phone.html
Click to expand...
Click to collapse
I asked that question in general and i ve done it..evrythin is working fine now...thought a of u can help me out.thats y asked
If the problem/issue is solved.. Then rename your (this) thread /post as SOLVED.. So that from Now on it can help others.
Also give a suitable title to this issue related thread rather than just [Q]..:beer:
Sent from my Explorer A310e using xda app-developers app
Guys I kinda noob so if u can tell me step by step it will b a gr8 help I read all most al d post but need to knw wht ROOT n ROM is n hw I can enhace d sound on my xperia c handset cause its sound realy sucks n I have a problm with my radio too I cant connect to any of d radio stations. I bought my handset fr dubai
Ty n plz do help me
itsvjsingh said:
Guys I kinda noob so if u can tell me step by step it will b a gr8 help I read all most al d post but need to knw wht ROOT n ROM is n hw I can enhace d sound on my xperia c handset cause its sound realy sucks n I have a problm with my radio too I cant connect to any of d radio stations. I bought my handset fr dubai
Ty n plz do help me
Click to expand...
Click to collapse
Root your device using this guide
http://forum.xda-developers.com/sony-xperia-c/help/how-to-root-android-device-easiest-t2837947
iSiddharth said:
Root your device using this guide
http://forum.xda-developers.com/sony-xperia-c/help/how-to-root-android-device-easiest-t2837947
Click to expand...
Click to collapse
Ty so much fr link bro can u hep me a little more after rootin my device hw can I Instal viber4 or any other sound inhancing app to increase its sound.
itsvjsingh said:
Ty so much fr link bro can u hep me a little more after rootin my device hw can I Instal viber4 or any other sound inhancing app to increase its sound.
Click to expand...
Click to collapse
Try these links
http://forum.xda-developers.com/showthread.php?t=2155192
http://forum.xda-developers.com/xperia-z/themes-apps/mod-extra-volume-boost-increase-t2302748
sidd!!
thing is tht i rooted my xperia c using frme root so tht i can put xperia z1 or z2 rom d problm im facing is when im rr-booting my phn in touch cwm mode its showing an error with android sign "no command". I need to take back up of my phn 1st n fr tht i installled mkt tool frm play n recovery.img
can u plz guide me hw to get rom installed n take my current back too.
how to take d backup of my phn and instal d rom??
itsvjsingh said:
how to take d backup of my phn and instal d rom??
Click to expand...
Click to collapse
Install CWM (i.e. clockworkmod recovery) on your phone using this guide
http://forum.xda-developers.com/showthread.php?t=2696987
Then in CWM you will find an option of "Backup and Restore">> In that option you will find "Backup">> Select this option and backup will be made
Backup of your phone will be made in the SD Card.
---------- Post added at 02:11 PM ---------- Previous post was at 02:03 PM ----------
itsvjsingh said:
sidd!!
thing is tht i rooted my xperia c using frme root so tht i can put xperia z1 or z2 rom d problm im facing is when im rr-booting my phn in touch cwm mode its showing an error with android sign "no command". I need to take back up of my phn 1st n fr tht i installled mkt tool frm play n recovery.img
can u plz guide me hw to get rom installed n take my current back too.
Click to expand...
Click to collapse
make sure that you install a ROM which is made for Xperia C as it has locked bootloader and will only install those ROMS
There are currently 3 ROMs available for Xperia C (which are posted on XDA-Forums)
1) Xperia-Z-ized ROM : http://forum.xda-developers.com/showthread.php?t=2705091
2) Dark Xperia Z2 ROM : http://forum.xda-developers.com/showthread.php?t=2739724
3) Me! ROM : http://forum.xda-developers.com/showthread.php?t=2729350
4) I am working on the next rom !
how to boot ur phone in clive touch recovery as d image shown
4.Boot into recovery (turn off your xperia properly, now press "power" + "volume down" untill u boot into revcery)
when im doing dis in getting an error as no command
itsvjsingh said:
how to boot ur phone in clive touch recovery as d image shown
4.Boot into recovery (turn off your xperia properly, now press "power" + "volume down" untill u boot into revcery)
when im doing dis in getting an error as no command
Click to expand...
Click to collapse
I would say that you use CWM... It is best recovery ever :good:
**Root your device (Link provided above)
**Download "recovery.img" (attached below) and then place it in your internal memory
**Install "MobileUncleTools" (attached below) and install it
**In MobileUncleTools go to "recovery update" and select the recovery.img
**Wait for some time and your device will automatically restart and CWM will be started
( if you are on 16.0.B.2.16 then you have to do this process 2-3 times, I don't know why this is happens)
If later you want to open recovery then use the method : press "power" + "volume down" until u boot into recovery
Sidd
In tht recovery update im getting lot of cwm files which 1 to select
Sidd!!!
1 last question after Putin z1 rom an rootin my device wil I get updates fr Sony fr d system n fr d other apps installed??
Ty fr elpin me loads of love
itsvjsingh said:
Sidd!!!
1 last question after Putin z1 rom an rootin my device wil I get updates fr Sony fr d system n fr d other apps installed??
Ty fr elpin me loads of love
Click to expand...
Click to collapse
Installing ROMs, Rooting the device and unlocking the bootloader are considered under the rooting and hence void your warranty. After doing any of these you will not receive system updates from the Settings>>About Phone>>Software Update menu. But you can update your device using "Sony PC Companion" And apps will be updated from Google Play Store so it is no problem, you will receive updates for the apps installed.
And you may ask as many questions as you want there is no problem... This forum is made for this only :good: