Anyone can show me how to repair boot of my lenovo A850? Many thanks!
Hello,
I have Lenovo a850L with 8GB memory. I try to install this row rom http://www.needrom.com/mobile/a850-r...0303-official/
Everthing was be ok, When a green circle appears i reset and power phone but phone can not power and nothing happened! He is break. I can not put in recovery mode and i can not turn phone.
hungtrauvang said:
Anyone can show me how to repair boot of my lenovo A850? Many thanks!
Click to expand...
Click to collapse
To repair sth you should know the problem... if you know what may be boken search in google how to fix it.
The easiest you can do is flash a new rom. Follow a a850 rom flashing video. Mind that you will lose every data in the phone...
Joomlar said:
Hello,
I have Lenovo a850L with 8GB memory. I try to install this row rom http://www.needrom.com/mobile/a850-r...0303-official/
Everthing was be ok, When a green circle appears i reset and power phone but phone can not power and nothing happened! He is break. I can not put in recovery mode and i can not turn phone.
Click to expand...
Click to collapse
I can't be sure that this is an a850 rom (since the link is broken) but it seems so... If that is an a850 rom, you shouldn't flash it in the first place (unless you was sure that it will work).
I also think the you own an a850i and not a850L phone.
...and stop spamming the forum (copy-pasting your problem under other topics).
Conclusion: Try to flash a new rom for a850i. If you don't have one, contact your seller.
Sorry about spam.
Yes, i this is a850i version. I found on XDA that A850 and a850i used the same ROM versions.
Related
Is there a way to update my Alcatel One Touch Pop C5 phone to Android 4.4 ?
I've got another problem .... i Tryed to port 4.4 for the phone, but the phone is now bricked. Is there a way to unbrick it ?
danibosev said:
I've got another problem .... i Tryed to port 4.4 for the phone, but the phone is now bricked. Is there a way to unbrick it ?
Click to expand...
Click to collapse
Sorry to hear you've bricked your phone. Perhaps you may try volume up plus power on button to enter recovery and to see if it turns on, if it turns on there is a chance, if doesnt, bad luck then...
mladenks said:
Sorry to hear you've bricked your phone. Perhaps you may try volume up plus power on button to enter recovery and to see if it turns on, if it turns on there is a chance, if doesnt, bad luck then...
Click to expand...
Click to collapse
IF is soft Brick Flash the original rom...you must have a backup rom to flash it whit sp flash toll chek the web for more info
danibosev said:
I've got another problem .... i Tryed to port 4.4 for the phone, but the phone is now bricked. Is there a way to unbrick it ?
Click to expand...
Click to collapse
try this Mobile Upgrade
Hi peeps...
I got a situation here with my a850. Before, I'd just bricked my phone after done flashing some roms from needrom.com. then my phone just dead & cant even to switch it on. Later I managed to get it fix by flashing this rom A850_S203_140208 and turn out to be ok. Get it rooted with Framaroot & get back my imei with Mtk Droid Tools also get rid out of Chinese bloatwares & apps with that software.
Now when I try to flash another rom, it get stuck with A850_S203_140208 Chinese logo. Then I had to restore it back to where it was.
Is there someone willing to help me out?
I guess you have to flash to s121 as most ROMs are based on it
a850 rom are not suitable for a850i . thats why. find the one for a850i .
What do you mean? Is S121 ROW is compatible with this S203 CN? I wanna try it if yes...
Who come here because want to fix phone won't turn on and pc won't detect is easy..
First, remove battery and connect your phone then press Power + Volume Up + Volume Down.
Then, your PC should detect your phone but wait.. you can't install them yet..
After that, find your stock firmware compatible with your phone (if you don't know, you should find it, or you can download all files about Lenovo A850 then test one by one)
Crap, disconnect your phone from. Then, load scatter file then untick all except PRELOADER, choose Download Only then it will flash. Connect your phone then press as it mentioned..
After that, you are done at fix PC not recognize the phone... after this settled.. flash the rom as well.. use the compatible only!! if you use the same.. the same things will happens..GOOD LUCK
[ROM][6.0] CyanogenMod 13.0 [ALPHA] have bricked some XPERIA L devices. So this thread is to help those people who are facing the problem. I came across some methods to recover their Xperia L. Although, I am not sure it will work because I haven't tried it myself (Can't risk bricking my phone on purpose just to check this method which may or may not fix it ). But please go ahead and try it.
It's better to try than to cry!
Click to expand...
Click to collapse
METHOD 1
Remove Battery, press power button for around 10-12 seconds..then press and hold volume up, a Insert the battery , fash tft file using flastool
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by KãyRá S.s)
METHOD 2
Disconnect the phone from PC if connected Remove the battery Press and hold the power button for 15-20 seconds Re-insert battery Flash latest FW using flashtool..
Source: https://www.youtube.com/watch?v=lycyxdkNlz8 (Comment by BEST FULLAPPS)
If anyone know a better method or a suggestion please post it...
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Hard Brick......
Flashing_Expert said:
you can't fix in any way broken partition table, only with jtag and similiar, this all should work for semibricked devices...
Click to expand...
Click to collapse
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
You had to install the latest package.. if u didn't only then u would've got hard bricked... cm13 is now tested by too many people and it runs without bugs.. so it may be the fault with the version of cm13 you used..
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
oh damn another one guy same happened to me with same rom ...
sorry but this means your phone is dead like mine, your bootloader is corrupted so device is unable to boot to kernel nor to system
no flashmode or fastboot mode, you can see it only in device manager (with proper drivers) as qhusb dload 9008
sadly we don't have proper files for QPST software so nobody unbricked his XL to this date
only chance is motherboard replacement
udaykapoor97 said:
Sir plz help me out i have bricked my device. When i connect it to a charger it shows a greenish light for a second and the it fades out. No detection my pc. It says that it is an unidentified device. actually it happened after i flashed cm13 by olivier. It booted up fine. I then just shut it down to install gapps. But it didnt respond any more.
Click to expand...
Click to collapse
btw you had 2 partitions on your microsd? I need to know...
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
xleng said:
Hi, is it possible to have some more information on the situations with cm13 that have caused a hard-brick? I understood that that the features such as link2sd and app2sd are potentially dangerous? Is this understanding correct? If yes, could you please explain why and under which circumstances this could create troubles?
Do you have any further suggestions on what to avoid?
Many thanks in advance for your expert advice.
I wanted to try cm13 on my spare xperia l, but would like to avoid a hard brick...
Cheers,
Hennng
Click to expand...
Click to collapse
Its already been fixed in newer builds, also, the developer has stopped the development. But you can surely use CM13 Based ROMs since they also have better editing options.
I really cant wait for cm13. It really pleases me If rom get fixes
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
way2aware said:
Problem: You have purchased a China Lenovo S856 smartphone and tried to flash ROW ('Rest of World') firmware to it for whatever reason. You now have a softbricked phone that won't boot past the Lenovo screen.
Solution: Download the following files, which are a little tutorial with pictures, as well as the correct China firmware for your s856 and the Flashing tool to use....https://drive.google.com/open?id=0B6knvSQRiKPzQTMtaXFXZEFNbHc https://drive.google.com/open?id=0B6knvSQRiKPzRTk4ZTB3c1VDdzA https://drive.google.com/open?id=0B6knvSQRiKPzWVA2UENuY1NYTkk
All the solutions I have seen so far were sketchy at best and very difficult to comprehend, let alone use to unbrick your phone. This is what worked for me, and my attempt to help anyone else with the above problem.
That is all, and good day to you.
Click to expand...
Click to collapse
Prajiro said:
Thanks for your help, but my problem looks very difficult now, because the system cannot recognize the phone and the phone refuse to boot on. What do you advice?
Click to expand...
Click to collapse
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
way2aware said:
Hello...
My system did not recognize my phone, either. Nor would it boot up... it was bricked. This tutorial is for people who are exactly in your situation. I would suggest downloading the files I have uploaded, and reading the tutorial.
Click to expand...
Click to collapse
Finally got the process started,...but after 7s I got and error message Reached the end of the file.(0x80070026: Receiving hello packet)
Could it be my PC (win 10 32 bit) problem or what do you think?
This happened to me as well, the first and second time I tried the flash. There is a trick which worked for me... I pulled the battery out and put it back in and while holding the volume 'up' button, I plugged my phone into my computer usb port and let windows install the driver. It took a few seconds and then I clicked 'refresh' on the Miflash window, which I had left on. At this point the 'flash' button became available and I clicked on it. This time the flash was successful. Try it.
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
BoonmaC said:
Hi All,
Can anyone help me.
My oppo phone has recently giving me problem when doing Power On. The phone stuck at OPPO logo forever. I need to do a hard reset everytime to restart the phone. A normal restart will not work whereby it stuck at displaying OPPO logo. Sometimes a normal restart will jump to another screen whereby I need to enter a password to use Android. Is there a password for Android? Please guide me how I can solve the problem and where can I download a newer firmware for my phone. Thnak You
Oppo phone model : R9s Plus
Android version : 6.0.1
Version: CPH1611EX_11_A.20_180803
Click to expand...
Click to collapse
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Venkata Lochan Nune said:
Check this link out Root and install TWRP
Then try googling for custom ROMs or just get the stock ROM itself and reflash it.
The problem you are facing is called bootloop. Is it booting to safe mode? Try checking that out too.
Click to expand...
Click to collapse
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
BoonmaC said:
Root and Install TWRP is for chinese edition only. No it is not booting to safe mode. Can you kindly help me. Thank you
Click to expand...
Click to collapse
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Venkata Lochan Nune said:
Doing anything is (almost) impossible without TWRP. Is there no version that supports yours? If none, you might just have 2 options : get a new phone or Develop them yourself(Takes time but that's a lot of fun, frustration and fear combined when done for the first time). Which one do you choose?
Click to expand...
Click to collapse
Or wait a sec, is your phone powered by mediatek? And is it booting to recovery? If yes, attach an image of the recovery.