Related
good day to all
my phone lg p920 is not responding
even charging no lights or vibrate even the on/off key
even i press vol up and connect to pc
even i press vol down + end key + power on at the same time
my phone is new and i buy it new
this problema begins when i tried to upgrade it and try to restore my imei back
upgrade is ok and it work
but on the process of restoring back my imei my phone does not respond anymore after removing the battery and return it back
i brought it from holland and now in algeria
what shall i do???
please help me
Same Problem here... wanted to flash back to stock rom after flash-process was 100% my phone dont came back up stays off and dont get recognized by PC. I will try to send it to LG
Before you send it to LG tell me what you do to restore
xbsall said:
Before you send it to LG tell me what you do to restore
Click to expand...
Click to collapse
my phone is breaked too when i connect to pc no hardwares found,only omap 4430 for 3 seconds and nothing else...
ssacemilan said:
my phone is breaked too when i connect to pc no hardwares found,only omap 4430 for 3 seconds and nothing else...
Click to expand...
Click to collapse
Use the resurrection guide
4.0.4 SuperG with ACiD Audio LG-P920
For me not even OMAP device is found (
Derkaefer said:
For me not even OMAP device is found (
Click to expand...
Click to collapse
change usb cable and pc and take off the battery
xbsall said:
Before you send it to LG tell me what you do to restore
Click to expand...
Click to collapse
i try this one http://forum.xda-developers.com/showthread.php?t=1734330
at the step number 10 after putting back my battery my phone does not anymore
Use the resurrection method.
If you cant understand it ask a user who has already done it to help you.
mj_malabed said:
i try this one http://forum.xda-developers.com/showthread.php?t=1734330
at the step number 10 after putting back my battery my phone does not anymore
Click to expand...
Click to collapse
thank you to all...this time it work with http://forum.xda-developers.com/showthread.php?t=1629307
my pone already opened..but i got another problema again...
no network and no imei...
xbsall said:
use the resurrection method.
If you cant understand it ask a user who has already done it to help you.
Click to expand...
Click to collapse
plz give me link of it.thank you
My Xperia C used rom Xperia-Z-ized™ v0.94. Then I've try installed this rom http://forum.xda-developers.com/showthread.php?t=2729379. When it completed, I've restarted the phone. But it suddenly turn off, then it seems hard brick (Cannot turn it on with power key. when connected charger it has red light). I've anything in http://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/ but still the same.
Anyone can help me solve this problem ? Thanks a lot ^^!
Sorry for my bad English
yeubeo168 said:
My Xperia C used rom Xperia-Z-ized™ v0.94. Then I've try installed this rom http://forum.xda-developers.com/showthread.php?t=2729379. When it completed, I've restarted the phone. But it suddenly turn off, then it seems hard brick (Cannot turn it on with power key. when connected charger it has red light). I've anything in http://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/ but still the same.
Anyone can help me solve this problem ? Thanks a lot ^^!
Sorry for my bad English
Click to expand...
Click to collapse
there is no link for the xperia C how you flash ?? i think you flash the wrong file which causes the hard brick .. i think
lovegurulavdev said:
there is no link for the xperia C how you flash ?? i think you flash the wrong file which causes the hard brick .. i think
Click to expand...
Click to collapse
Yesterday I sent it to Sony service center for warranty
They said: you've waiting for 10-15 days until it repaired
yeubeo168 said:
Yesterday I sent it to Sony service center for warranty
They said: you've waiting for 10-15 days until it repaired
Click to expand...
Click to collapse
thats why have to read everything before trying .. as we dont have uBL and no custom kernel so we must check inside if there any inside zip
yeubeo168 said:
My Xperia C used rom Xperia-Z-ized™ v0.94. Then I've try installed this rom http://forum.xda-developers.com/showthread.php?t=2729379. When it completed, I've restarted the phone. But it suddenly turn off, then it seems hard brick (Cannot turn it on with power key. when connected charger it has red light). I've anything in http://www.informationlord.com/ultimate-guide-to-fix-bricked-xperia-c/ but still the same.
Anyone can help me solve this problem ? Thanks a lot ^^!
Sorry for my bad English
Click to expand...
Click to collapse
I think you have flashed the boot.img from that rom.its hard brick.so you have very less chances on getting it back.you can try the recovery steps posted.
Xenon1978 said:
I think you have flashed the boot.img from that rom.its hard brick.so you have very less chances on getting it back.you can try the recovery steps posted.
Click to expand...
Click to collapse
It cannot go to recovery
You can Try This :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
My Tablet was in the charger and it was turned off when i tried to power it , i found it was stuck in a boot loop
i tried to flash a stock ROM using using Odin 3.10 but still nothing changed,
i cant access the recovery mode using the power and volume up key,
but can access the download mode . please help me
Thank you
Got same problem
Ayman87 said:
My Tablet was in the charger and it was turned off when i tried to power it , i found it was stuck in a boot loop
i tried to flash a stock ROM using using Odin 3.10 but still nothing changed,
i cant access the recovery mode using the power and volume up key,
but can access the download mode . please help me
Thank you
Click to expand...
Click to collapse
I got same boot loop problem a week ago after installing a game. I couldn't get into recovery mode but I do have download mode. I have tried flash stock ROM multiple times and it always failed. Today, I brought my device to samsung service center. But guess what, even them couldn't help resolve the issue!!!
I hope someone here are able to help.
wiien said:
I got same boot loop problem a week ago after installing a game. I couldn't get into recovery mode but I do have download mode. I have tried flash stock ROM multiple times and it always failed. Today, I brought my device to samsung service center. But guess what, even them couldn't help resolve the issue!!!
I hope someone here are able to help.
Click to expand...
Click to collapse
Could they even identify the problem ?
Can you access Bootloader? And any custom recovery?
SuperMan(Alex) said:
Can you access Bootloader? And any custom recovery?
Click to expand...
Click to collapse
No i did n`t try , can u please refer to me a link , or explain to me what should i do exactly ?
Ayman87 said:
No i did n`t try , can u please refer to me a link , or explain to me what should i do exactly ?
Click to expand...
Click to collapse
and i cant use " USB Debugging"
http://forum.xda-developers.com/showthread.php?t=2102677
i tried this custom recovery but still looping
same here . i suggest trying different stock firmwares , if i get the fix for this problem i will tell u here
ameer3adel said:
same here . i suggest trying different stock firmwares , if i get the fix for this problem i will tell u here
Click to expand...
Click to collapse
Thank you
Ayman87 said:
Could they even identify the problem ?
Click to expand...
Click to collapse
Well, they said it hit the IC memory (cost around $200). so expensive :crying:
I've tried stock kitkat but still no luck
Ugh guys I'm having the same issues my tablet won't go pass Samsung Galaxy note 10.1 splash screen and can't stay on twrp recovery with out rebooting again. I tried to reflash twrp tar and stock firmware but it always fails and then my PC would say my USB driver or port is unrecognizable or malfunction so I bought another USB charging wire and tried it today and still get the same issues I hope someone can help me and us out asap!!
same here
Hi guys!
same here! my note was charging and I've found it stucked in samsung logo without any reason. I've tried to install almost every version available of stock rom also from different country but no way. I can install also custom recovery but unfortunately I don't have any custom rom to try to install in my sd card. At the current time I really thinking to move to new note 10.1 2014...I'm afraid is some kinda hardware malfunctions. Any update from you guys with same issue?
Andrea
afarnedi said:
Hi guys!
same here! my note was charging and I've found it stucked in samsung logo without any reason. I've tried to install almost every version available of stock rom also from different country but no way. I can install also custom recovery but unfortunately I don't have any custom rom to try to install in my sd card. At the current time I really thinking to move to new note 10.1 2014...I'm afraid is some kinda hardware malfunctions. Any update from you guys with same issue?
Andrea
Click to expand...
Click to collapse
Wow now I'm really start to think it is a Samsung and hardware issue I think these tablets weren't made to be usable for more than 2 years smh is anyone else with this issue running lollipop roms? Jc
The same here, My friend just conntect me, that SAMSUNG does not want to cover charges, due to bootloader says SYSTEM STATUS: custom.
And he never did anything with his tablet.
He got angry and Samsung check the hardware and they find that some chip is broken. But still don't want to fix it due to custom issue.
Hi guys its the 3rd time that i post here in the forum hopping to restore my "dead" Moto G3 XT1543 1GB RAM Snapdragon 410 (MSM8916).
Some days ago I've unlock my phone bootloader in order to install CM14.1 and i did it with success! but my sim card wasn't working, so, I tried to look for a solution. And I found a video on youtube that showed the supost fix for this issue, but i was wrong. I've flashed the file which broke my phone immediately and now my phone doesn't do ANYTHING!! Well, at least it shows on my computer as QDLoader 9008 but for now on I dont know what I have to do! I know that the easiest way to fix it is buying another motherboard, but I think that still hope for someone to find the way to fix it! Well, if the pc recognizes the processor so there's something to be done right?
I had searched all over the internet during this week, and I found some interesting possible ways to fix it, but im not a developer so I need help and opinions from other people.
1)The first way was to change the mode to 9006 aka diag mode though some files wich in theory allows you to acces eMMC partition and restore all the 29 inside partition and recover your phone. The problem is: I don't know how to change it to diag mode, but yea i have the needed files, and i don't have the tool to acces the eMMC of the phone and i dont have a backup of the partitions to write over the corrupted ones.
2)The second way was to use this tutorial *http://www.droidsavvy.com/unbrick-qualcomm-mobiles/* that i still havent tried since my phone isn't with me right now. So, in this supose way we can contact the phone through a tool called QFIL and try to "Inject" the bootloader or whatever, in the phone to foce him into a bootloop and so enabling the fastboot mode which allows you to install a rom later on. well the problem for this one is, i dont know if it works on your moto g3 but i gonna try. (if you try this option tell me and i gonna upload the needed files because the folder avaliable in the link contais files for the processor Snapdragon 610 and Moto G3 processor is a 410)
3) The third way is a Jtag repair in a authorized store, but i dont think Moto G3 have a jtag fix (im posting this possibility because i could be wrong)
4) In this way could be a updated Blank Flash actually used to hard unbrick the Moto G1 and I Guess the G2? But im not a developer and I dont know too much about programing, but i'm sure someone out there is a pro
5) Use the QPST which is kinda the same thing as use a eMMC tool? ( again im not a dev ) and from what i got, is used to config all your phone from scratch. would be good if there's a tuto out there
6) Sit and wait till Motorola release the MBM-CI 5.0 which from what i got is used like the Blank Flash or used to make a Blank Flash idk
AGAIN!!! IM NOT A DEV, THIS IS JUST SOME WAYS THAT I FOUND OUT THERE ON THE INTERNET WHICH COULD BE USED TO FIX YOUR BELOVED MOTO G3!! SO, I'M SHARING ALL MY RESEACH WITH YOU GUYS BECAUSE IS A SHAME HAVE TO DUMP MY DEVICE LIKE THAT OR HAVE TO EXPEND LIKE R$ 500 IN A NEW MOTHER BOARD WHICH IN DOLLAR ITS LIKE 1600 U$D (this is Brazil guys yea it's a horrible country T_T ) SO I HOPE THAT THIS POST HELPS SOMEBODY AND IF YOU GOT SOME INFO SHARE TO HELP US TRY TO FIX THE PHONE!
hey you got successful??? in unbricking your phone?
[email protected] said:
hey you got successful??? in unbricking your phone?
Click to expand...
Click to collapse
not yet, i send my phone to an authorized i hope they can fix it via programming box
IkkyShad said:
not yet, i send my phone to an authorized i hope they can fix it via programming box
Click to expand...
Click to collapse
Ohhkay
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
siredux said:
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
Click to expand...
Click to collapse
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
IkkyShad said:
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
Click to expand...
Click to collapse
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
[email protected] said:
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
Click to expand...
Click to collapse
yeah, you can try but the models are different and also the partitions inside the phone... try it out and if it works you can post here
No u can't try the Moto g2 firmware..... As Moto g2 is also waiting for MBM CI 5 file for lollipop and Motorola is not releasing those file needed for blankflash
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Jaysin365 said:
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Click to expand...
Click to collapse
No... And just like previous Moto devices, it is unlikely we will ever get the necessary files.
Same situation, any updates?
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Click to expand...
Click to collapse
I appreciate any help!
gibarsin said:
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
I appreciate any help!
Click to expand...
Click to collapse
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
Thanks for the quick reply, I will post my results here whether it's successful or not.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
+1 on this.
The only other thing I would do is take it apart and detach one wire from battery and short that lose wire to the other wire (short the phone, NOT the battery!) for 15 sec or so and reconnect wire to battery and put phone back together and try boot to bootloader (power plus vol-dn). If no go, at that point if it were worth it I would give it to ATT to fix, or toss it in the drawer for parts.
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Durga teja said:
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Click to expand...
Click to collapse
Tell us how you bricked it?
KrisM22 said:
Tell us how you bricked it?
Click to expand...
Click to collapse
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
beyond my knowledge. Hopefully someone will jump in.
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
If there is no bootloader and the only thing that can be seen on the computer is QdLoader mode, it's done... Send it to Moto for repair or send it to the recycler, there is no fix we can do.
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
f_magsi said:
Hi
Please help me my Techno Pop 5 LTE smartphone stuck at this logo, (picture attached), I 've tried all methods but even unable to Hard Reset through recovery menu (failed to start through buttons POWER+VOL UP), I 've tried a lot, if there is any other method kindly let me know.
Click to expand...
Click to collapse
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
thanks brother, it worked.
f_magsi said:
thanks brother, it worked.
Click to expand...
Click to collapse
I'm glad to see your device is working again. Please post the screenshot here.
mvikrant97 said:
If it is a software issue you may need to flash the phone fimrware. Please watch this video here and if you need help with files required, feel free to reply back.
Flash File
Download it from here
SP Flash Tool Modfied
Credits:
GSM Phone Repair
Click to expand...
Click to collapse
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
f_magsi said:
I was trying to hard reset the phone, and recovery menu appeared previously it was not working, any way set restored successfully and every thing was working fine, but then i restarted the mobile to make sure, it was ok, but same problem happened again, stuck at logo, now again i am failed to find the recovery menu, by pressing Vol_Up + Power_Butn, and cannot turn off/switch off the mobile, it is a loop and auto restart, when i try to turn it off, now i want to flash the new software, please guide me.
Click to expand...
Click to collapse
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
mvikrant97 said:
Download this firmware if it BD4
Tecno POP BD4 Firmware
Does your phone have SPD/Uniscon chipset?
Click to expand...
Click to collapse
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
w1n73rf3ll said:
hello i have almost same issue with tecno pop 5 LTE i try to restore the NVRAM now i try to reflash and and the phone its stuck at fastboot mode how can i fix this ... i try to download the file you posted so i can rewrite again i try sometimes with sp flash and i can write with that the only way i can flash is with chimera tools thats the weird part i need some help
Click to expand...
Click to collapse
I don't have Chimera tool to test.
Why do you need the chimera tool?
its a phone repair program ... i tried with others tools and no luck