Database Info

[Q] Feiteng H7100 bricked MT6577 unbrick?

Hi, I have a big problem with my new Phone Feiteng H7100! After I flashed the ROM (from needrom), nothing happens on the phone! Everything went as described until the green circle. Nothing now … when connected to the PC appears a USB / network device name: Alcatel Single RNDIS interface, nothing more happens.
Can someone help me here? Please
jemmars

Hello everyone,
can anyone help me here really? I've also, quite diligently search through the forums for possible solutions, but I have not found anything. Please, please help me with my phone ... where I still have birthday ... your help I would be today's greatest gift!

Did you tried to reflash with another ROM?
Maybe this will help you: http://forum.xda-developers.com/showthread.php?t=2186116
Please post your experience.

hi, can anyone help me, i have a feiteng h7100, totally bricked, not turn it on, the computer dont recognize, is a dead phone, i flash it with sp flashtool first time says ok, but no turn it on, so i flash it again, in the middle of flashing says error and the cpu dont recognize any more my phone, any ideas..

never flash DSP_BL and preloader. as long as the device is recognized on your PC, its not "dead" othewise you can try the "testpoint" methode, but not all motherboards have one.

[Q] Thunderbird i5 - bricked and RIP

Hi folks,
I recently bought a Thunderbird i5 dual core - mtk6577 at cect-shop.com .
As far as good, dumb as I am, I tried to flash a pure android rom of colonelzap.
Since then, the phone is completely gone. The screen is dead and I can't hear anything, that the phone is booting. When I push the power button and the phone is connected to my pc, I can see, that the usb vcom drivers are loaded properly. So I guess its still possible to flash a correct rom.
I contacted the cect-shop.com team last week and the advised me to open up a thread at chinamobiles.org - sadly no appropriate answers yet.
Does anybody have a stock or custom rom, which is supported by the Thunderbird i5?
Or better said, is someone able to help a damn noob to unbrick the phone and to bring it back to life?
I appreciate any hints.
Thanks,
Maik

I have exactly the same phone and the same problem. Can anyone help please ?

hello
geminikish said:
I have exactly the same phone and the same problem. Can anyone help please ?
Click to expand...
Click to collapse
i have samme problem i flash from this link tutorial http://forum.xda-developers.com/showthread.php?t=2239861 but i bricket my thunderbird i5 mtk6577 because my laptop turn of on the proces of 50% of the flash but i have one idea i think i must remove the battery from board and insert again like mayandjay on youtube hi cut the 2 cables the red and the black try this way and then put it again and start to flash from begining

[Q] Freelander pd10 3g bricked

hi Sir,
i have freelander pd10 3g tablet and have tried to make firmware upgrade using sp flash, and i got the green circle tells me that upgrade is completed. but the tablet never started up then, not responding at all no power up no charging no recovery mode, nothing at all, when i connect it to pc it keeps connecting and disconnecting without removing the cable.
i need your support please i heard alot about you and have seen issues that were solved by your instructions, help me please it is still new.
written on the board inside tablet yg_mg705d
it's 8 gb, 1 g ram, 2 sim cards, hdmi
waiting for you

Thank GOD
Dear All,
Since i had a problem and i tried to get these developers help without any result and they haven't responded at all, i started searching and praying to ALLAH till i got this Site : h**p://forum.etbuying.com/viewtopic.php?f=18&t=26
It solved my problem as simple as it is.//
Good luck for all:laugh:

[Q] No sound during call after connecting microusb pendrive

Hello everyone.
I'm using a Moto G (stock rom / unrooted), and everytime I connect my microusb pendrive (sandisk), I stop hearing sound during calls...(even if I remove the pendrive).
The only way to fix it, is rebooting the phone, but then, if I reconect the pendrive, the sound is gone again...
Couldn't find any case like this, but maybe I'm just searching using the worng terms... I don't know...
Anyone knows how to fix it?

Hello guys,
I tried some things to solve the problem as below:
Factory Reset
Re-install stock firmware
Changed the pendrive in the place where I bought it.
The problem still persists...
Anyone could provide any help please? Any tips?
Thank you.

[Completed] Hard Bricked in a peculiar manner

Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.

Tiks_Baralous said:
Hi xda,
So I had a soft bricked Micromax Canvas a290 which boot looped and couldnt access recovery. I flashed it with a stock ROM. Now the phone is hard bricked, and I'm thinking probably because the rom I downloaded had issues. I looked up another stock rom from xdafirmware, and am trying to follow a tutorial on youtube on flashing a hard bricked device.
The issue I have here is this:
The tutorial says the phone is supposed to connect and disconnect every 7-8 seconds (evident by the sound windows makes when usb device is connected and disconnected).
The thing is, when I connect my device windows makes the connected sound, but the device doesnt disonnect. SP flash tool cant flash my phone. I have tried any and every button combination, but they dont seem to help.
I am an tech enthusiast myself, and I have flashed a lot of mtk soft bricked devices before, but I am totally stumped here.
Can anyone help?? Any ideas whats happening? Any help is greatly appreciated. Thank you.
Click to expand...
Click to collapse
Greetings and welcome to assist. I can find very little information for your device apart from this thread which may help, can you connect to the device just using fastboot ?
https://forum.xda-developers.com/android/general/tutorial-micromax-canvas-knight-a290-t2872896
Good Luck
Sawdoctor