hello friends
I'm new to this
quieciera know if I can help
I'm not looking for the product warranty
I just want to support
psa what is this
buy a 792 Avvio installed by root
I took the bootanimation (start logo clear) and I delete and instead put another bootanimation with the same last name
which is "bootanimation.zip"
restart and run
you remove the logo light
already had my own bootanimation
after a while I wanted to change it back
I did the same process (I had to replace the one leaving with the same name
restart
but this did not work I see
stays in the logo (which you install it) and goes no
and start in recovery mode "" which has by default "" delete data and wipe
and factory reset
this is not covered by warranty for modifying computer system
but I just want you indicate me how I can fix it
Note:
download roms and other previous models but not let me install anything from the recovery that comes by default
I found the backup to restore the original system but I can not install CWM recovery because Tenco and is only possible with the recovery
I have not found a way to install CWM
because you need to have USB debugging enabled and not enabled as no longer starts
Tutorials Found
for installation or change roms are for Previous models but still nothing for this model
quiciera help me telling me how to install CWM recovery or restore the original system with the recovery that brings the default 792 Avvio
or just give me the link of the files or procedures
Thank you ...
aaa thanks to who gave me the suggestion to put the post in English
XD
Hi!
I'm afraid XDA is an English site, and all posts need to be in English.
Please translate, with Google translate or something similar. ?
Hi!
Thank you for translating....sorry I didn't see your edit right away.
Unfortunately there is nothing on XDA about your device that I can find. You can ask in our General Q&A section and maybe someone can help.....
>*Android Development and Hacking*>*Android Q&A, Help & Troubleshooting
I will tell you tho....installing CWM won't help you restore your system if you didn't have a backup made with CMW already. You may need to contact the phone maker and request your stock firmware and instruction on how to install it.
Good luck!
Related
Hi..
So to start off, I'm really desperate right now...
I had a BEE 9500 Phone with an MT6589 board, it was all working fine, until I accidently formatted the system partition, and I have no backup even... I only have a system folder backup, but is that even useful ?
When it was working, this is what MtkDroidTools showed :
i.imgur.com/hNBv1a7.png < I cant post link normally since I'm new.
Now it shows this, and mind you, the phone is stuck in boot loop and it will only show this when I'm mounting USB via CWM Recovery ONLY, It won't detect the phone normally when in boot loop (driver issue maybe) :
i.imgur.com/wY3yPFy.png
IMEI is blank ... everything is wrong... I don't know ...
(I have no idea why, but its showing the android L stuff, I have no idea whats going on...)
And I tried going into fastboot mode and using fastboot.exe to flash a system.img I created but it will keep saying <waiting for device> the whole time...
Any idea ? I think my phone is dead at this rate....
Since we do not have a forum for this device, kindly post your issue in Android Q&A, Help & Troubleshooting so that the right expert may be of help.
Sounds like wrong bootimage or incomplete system image. You may need to find Original Stock firmware.
Perseus71 said:
Since we do not have a forum for this device, kindly post your issue in Android Q&A, Help & Troubleshooting so that the right expert may be of help.
Sounds like wrong bootimage or incomplete system image. You may need to find Original Stock firmware.
Click to expand...
Click to collapse
Alright thanks, I will try posting there, but I'm afraid that no one would have the stock firmware since I looked everywhere for that, though I hope someone does :S
Hi, I accidently press make system app google photo on titanium backup then I press it to go back to user app and it stuck for like more than 10 minutes. So i stopped it, app disappear and I restarted but phone does not boot any more. I run genuine recovery and adb says unauthorized.
Any idea how to get to system and delete that app and how to see my data?
Thanks!
Sir,
Give us more details about your device/ROM.
Thanks
Umi zero stock rom.
I fixed it with backup in recovery than update with same rom and restore backup. As this kind of backup does not backup rom it fixed my problem and I lost only rom changes like 2 files...
But still it. Is good to know if there is a way to read rom partiition on stock recovery and stuck phone.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts if you have more question about:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Hi...i have a nexus 5 with custom rom + twrp...i tried to restore to factory setting and from that point everything went wrong...the phone restart and stuck on google logo...after alot of searching in the post i install adb driver and now the phone dont have operating sys..i also wipe everything.. The situation now is that i push with adb a new flash to the phone and when i try to install from the ziped flash im gething "faile" with the renarks as show on the attached picture....
I realy appreciate any help...since the phone now is stuck on google logo and i can enter to twrp menu
polipom said:
Hi...i have a nexus 5 with custom rom + twrp...i tried to restore to factory setting and from that point everything went wrong...the phone restart and stuck on google logo...after alot of searching in the post i install adb driver and now the phone dont have operating sys..i also wipe everything.. The situation now is that i push with adb a new flash to the phone and when i try to install from the ziped flash im gething "faile" with the renarks as show on the attached picture....
I realy appreciate any help...since the phone now is stuck on google logo and i can enter to twrp menu
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
Sorry to hear about your trouble but fortunately there is an XDA area dedicated to the Google Nexus 5 at http://forum.xda-developers.com/google-nexus-5 . I suggest you post your question with all relevant details in the friendly Q&A forum there at http://forum.xda-developers.com/google-nexus-5/help where the experts familiar with your device will be best able to guide you.
Good Luck!
Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.
Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck
Hey, guys good afternoon. I have a Cubot Note S which I manage quite stupidly, to brick. The phone was rooted with KingRoot and I accidentally press to update to the latest software version from the Update Center of the phone and before it managed to complete, it showed an "ERROR" message. After that, I stuck into a boot loop. I've been searching the internet for a stock firmware of the phone in a .zip file because the Cubot has something like a stock Recovery mode, which I can boot to, to factory reset my phone, to boot into bootloader or apply an update through an sdcard etc. So far I only found a rom on needrom and it is in .rar and has many other irrelevant files in it. It has instructions below how to perform a clean flash of the ROM, but something goes wrong at the process. Either the SP-DMT (Flash Tool) doesn't work properly or my computer doesn't recognize my phone and I can't find the proper drivers for it. Has anyone ever been in this situation before with a chinese phone? Please help out with this because the cell phone belongs to a dear friend of mine and I can't afford to buy a new one these days. Thank you in advance.
Hello and thank you for using XDA Assist,
please create a thread here:
Android Q&A, Help & Troubleshooting
Kind regards
Trafalgar Square
XDA Assist