Database Info

[Completed] [Q] Am I Bricked/SoftBricked , lose my Rom? Help please.

Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......

Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

Thank you. Thread closed.

[Completed] [q] no os installed on android phone.

HI i recently looked at this website through google and nothing get better then this website anyhow im here asking to restore my phone to any condition so its working .
I lost my OS while installin and messing with ROM on my supersu android . Now the phone wont move from the starting screen and i can only use recovery mode .
Since i lost everything recovery mode doesnt have custom rom i trasnfered , so i tried to trasfer rom using ADB but my phone comes offline in cmd manager and cant trasnfer files even tried in fastboot mode on the phone that didnt make any difference.
I tried using sd card to install rom from but they need to be formated so i used my pc to format but its write protected so my sd card doesnt detect in recovery mode neitehr i can use on pc to transfer files onto it. I Dont know any way to get my phone started again please help it would be great if i get it started Thanks alot help be truly appreciated .

Hi there,
About what device are we talking about?
Thanks

R_a_z_v_a_n said:
Hi there,
About what device are we talking about?
Thanks
Click to expand...
Click to collapse
thing is my device isnt so popular maybe thats why iam struggling . its Micromax nitro a311 .
I put my phone in fastboot mode to see if that helps in adb . but device doesnt show up but if i just start it and let it hang by main screen it detects it but then its offline bit of confusing stuff. lol

elson0092 said:
thing is my device isnt so popular maybe thats why iam struggling . its Micromax nitro a311 .
I put my phone in fastboot mode to see if that helps in adb . but device doesnt show up but if i just start it and let it hang by main screen it detects it but then its offline bit of confusing stuff. lol
Click to expand...
Click to collapse
Your right.
I'm sorry but I can't find anything related to your question/device except this thread: [Q] Need To Root micromax Nitro A311
Please post that in the forum bellow for more answers from the experts, but first register an account on XDA:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Broken fastboot & recovery

Hello there,
I'm new here but I really need help with my phone, I broke the recovery by flashing the wrong version of the recovery, and I did the big mistake of rebooting before flashing a good version on top of it.
Now I can't access either fastboot or recovery, and the flash_image program that can be used by adb does not work and tells me that there was an error searching partitions...
I can boot in the installed rom just fine, so if adb is needed I can use it, but I don't have anything else than that. The phone is a Huawei G510-0100 (u8951)
I don't know what to do anymore...
EDIT: after using the application ROM Installer from here: http://forum.xda-developers.com/showthread.php?t=2480034 I was able to get a usable recovery but with corrupted screen and in that recovery I flashed the right version so everything is back to order.

Hi,
This is all I could find.... There's really no feedback on the thread, so flash anything at your own risk as always...
> General discussion > Upgrading, Modifying and Unlocking > reverting your huawei g510-200 back to factory stock
If you need help, you can try asking in that thread.... Otherwise for this or any other questions, you will need to ask here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Stuck on bootloop and can't access recovery mode!

PLEASE HELP ME!
My device is Lenovo A690. Just check the specs in the net, however i will say now to you it's an old device.
So my problem started when i tried to click Tools>Patch to Android>Remove patch to services.jar in Lucky Patcher. I did that because i want to remove the patch i did to be able to install apk files with different signatures whatsoever.
Now im in a bootloop. I can access interface for a second or two but after that, it hangs and reboots endlessly! The worst of this is i dont know what is the hell happening in my recovery since i cant access it. I know the right combination of keys, i see lenovos logo flashing to white indicating that it goes to recovery, but after that it just repeats and recovery wont open.
Please help on what should i do to fix this. Im willing to wait for some people to answer this thread. :'(

kylextrm546 said:
PLEASE HELP ME!
My device is Lenovo A690. Just check the specs in the net, however i will say now to you it's an old device.
So my problem started when i tried to click Tools>Patch to Android>Remove patch to services.jar in Lucky Patcher. I did that because i want to remove the patch i did to be able to install apk files with different signatures whatsoever.
Now im in a bootloop. I can access interface for a second or two but after that, it hangs and reboots endlessly! The worst of this is i dont know what is the hell happening in my recovery since i cant access it. I know the right combination of keys, i see lenovos logo flashing to white indicating that it goes to recovery, but after that it just repeats and recovery wont open.
Please help on what should i do to fix this. Im willing to wait for some people to answer this thread. :'(
Click to expand...
Click to collapse
Hello and thank you for using XDA Assist.
We cannot provide technical support nor can other members reply to your posts here on XDA Assist. There is no forum specifically for the lenoco A690 at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help. That's a good place to start where members familiar with your device might be able to advise you.
Good luck!

[Completed] Lenovo Tablet S6000L

Hi everybody;
I'm having big problems with a Lenovo S6000L tablet which became a brick for a while and came to (half) life again because I can get into recovery or fastboot but it won't turn on again further than that after a factory reset. I used SP Flash Tool with (stock, I suppose) rom "S6000_A442_001_025_131017_ww_wifi" which takes me to a "Please button to set the Country Code" again and again to select the Country option but afterwards it will show a time "Timeout Failed".
Before it went wrong I had made a backup of the previous rom using Clockworkmod and the problem is that, after the factory reset, I have lost that CWM recovery and can´t install CWM back again from the rom backup which was ok because SP Flash Tool doesn't seem to install it. Installing CWM would solve my problem but I am scared about flashing the wrong files and get a brick again. Of course , part of the problem is that I can't use MTK Droid Tools to install CWM because apparently Debugging is off and MTK DT doesn't recognize the tablet when connected, which SP Flash Tool does.
So could anybody, please, give a hand to make this half-brick work again?
Thank you.

Hi,
Thanks for writing to us at XDA Assist.
There is no dedicated forum for your device at this time but you may want to ask your question with all relevant details in the friendly general Android Q&A, Help & Troubleshooting forum at http://forum.xda-developers.com/android/help.
Since your device is relatively uncommon, please be patient and give the experts plenty of time to respond.
Good luck