Succesfully compiled PAC rom for Galaxy ACE 3 LTE! It is compiled from CM11 device tree with slight modifications. Everything works like CM11, expect NFC! Rom can be used as a daily driver!
Note: PAC stands for Paranoid AOKP and CyanogenMod! It combines all the goodies in one ROM!
In my opinion it can be used as a daily driver!
Download link: https://mega.co.nz/#!F59GQLDS!ifQnca5_oRKc1VEIwcrBEbTorN024E1heQOTNOGN9vY
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
For GT-S7275R ONLY
Do not enable PAC in black feature on settings, bugs will appear
Don't forget to say thanks
PS: I am not responsible for any damage to your device
Am installing now PAC ROM so, will taste it as long as i can handle my phone in daily use. Will report back soon.
1st bug and most importance, ROM doesn't go in to deep sleep. battery drain too fast. I think is kernel problem, need reconfigure.
This is from my phone
arrostos said:
1st bug and most importance, ROM doesn't go in to deep sleep. battery drain too fast. I think is kernel problem, need reconfigure.
Click to expand...
Click to collapse
My device seems to enter deep sleep, are you sure you had battery drain? maybe it was an process
Update
New release - 20140716
Change-log
-Using custom power HAL (Should improve battery)
-CM & AOKP sources update
-Audio config improvements and cleanup
If you are already on a PAC release you don't need to wipe anything!
Download: https://mega.co.nz/#!85USyJIQ!pDku4mr5Vvk-fmZbSNsL8KvP8klPEgwqczV5CdqDVcs
kostoulhs said:
New release - 20140716
Change-log
-Using custom power HAL (Should improve battery)
-CM & AOKP sources update
-Audio config improvements and cleanup
If you are already on a PAC release you don't need to wipe anything!
Download: https://mega.co.nz/#!85USyJIQ!pDku4mr5Vvk-fmZbSNsL8KvP8klPEgwqczV5CdqDVcs
Click to expand...
Click to collapse
Very nice job, i didn't test it yet, but want to tell some bugs on preview release.
Touch sensitive is not good enough, some times need to touche twice on same place to can recognize.
Had 3-4 times crash, on Torch, wile was trying to put lite one, but after the crash is started to work okay. Same happened on GPS Location, wile switching on/off.
Some times the home button doesn't wake up the phone, navigation buttons are lighting but screen doesn't turn on.
And about Deep Sleep, yes after some restarts, now is working
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
BTW, the phones works very fast with CM, it' amazing so much improve against Touch Wiz
arrostos said:
Very nice job, i didn't test it yet, but want to tell some bugs on preview release.
Touch sensitive is not good enough, some times need to touche twice on same place to can recognize.
Had 3-4 times crash, on Torch, wile was trying to put lite one, but after the crash is started to work okay. Same happened on GPS Location, wile switching on/off.
Some times the home button doesn't wake up the phone, navigation buttons are lighting but screen doesn't turn on.
And about Deep Sleep, yes after some restarts, now is working
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
BTW, the phones works very fast with CM, it' amazing so much improve against Touch Wiz
Click to expand...
Click to collapse
Thanks for feedback :good:
The problem is on android systemui, some times when am trying to open a new application, the message popa-up "Unfortunately, the process com.android.systemui has stopped. Blame the Split Screen"
arrostos said:
The problem is on android systemui, some times when am trying to open a new application, the message popa-up "Unfortunately, the process com.android.systemui has stopped. Blame the Split Screen"
Click to expand...
Click to collapse
did you enable Pac in black? if yes disable it! it is a buggy feature
kostoulhs said:
did you enable Pac in black? if yes disable it! it is a buggy feature
Click to expand...
Click to collapse
Yes, it was enabled. I think this is response on wake up phone too.
What, about the camera, whenever i press Volume up or down, it's taking a picture and there is no zoom. It's CM camera working like that?
arrostos said:
Yes, it was enabled. I think this is response on wake up phone too.
Click to expand...
Click to collapse
Maybe, I like Pac in black, but i do not use it because of the bugs
For Gapps, we use the same as CM11, right?
Enviado desde mi GT-S7275R usando Tapatalk 2
Arcanister99 said:
For Gapps, we use the same as CM11, right?
Enviado desde mi GT-S7275R usando Tapatalk 2
Click to expand...
Click to collapse
yes, right but you can also use lite gapps from here which are ART compatible
Link: http://forum.xda-developers.com/showthread.php?t=2608800
arrostos said:
Yes, it was enabled. I think this is response on wake up phone too.
What, about the camera, whenever i press Volume up or down, it's taking a picture and there is no zoom. It's CM camera working like that?
Click to expand...
Click to collapse
!!
arrostos said:
!!
Click to expand...
Click to collapse
For camera try using a third party app, i think CM camera app does not zoom
kostoulhs said:
For camera try using a third party app, i think CM camera app does not zoom
Click to expand...
Click to collapse
I tried to install google camera hd camera and Camera JB+, the same problem, there is no zoom function. but is ok, it's not so important problem.
One more problem with camera, when you rotating the camera is freezing especially on video recording.
New release
New build 20140720
Changelog (Same as CM)
Voip Fix
CM and PAC source Update
Kernel Sources Update
Add Dock Headset to audio policy
Download Link: https://mega.co.nz/#!cld2DbZZ!v7sbR4IHLqM5GKv2xPU-edkfTxz6BCNXHpok-tPzlUE
GT-s7272
Can you modify them to work on Gt-S7272
CartoonizedAmr said:
Can you modify them to work on Gt-S7272
Click to expand...
Click to collapse
Absolutely different chipset, impossible, for me at least
kostoulhs said:
Absolutely different chipset, impossible, for me at least
Click to expand...
Click to collapse
plz That's easy for you, and this is open source http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-S7275
Related
Q&A for [DAILY] - Stock UNOFFICIAL CM12 Builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DAILY] - Stock UNOFFICIAL CM12 Builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Freddy1X said:
Ok guys. Awesome, double tap to wake is back! Also this build working fine with the code *#*#4636#*#*. So kudos! :good::good::good:
Click to expand...
Click to collapse
Double tap is awesome on this build!
* No battery percentage here?
Tnx a lot for your work daleski75!
hoshhosh said:
Double tap is awesome on this build!
* No battery percentage here?
Tnx a lot for your work daleski75!
Click to expand...
Click to collapse
Looks like they took it out and I think it's much better that way!
Dirty flash over @bpear96 2014-11-19 build not woking
Dirty flash over @bpear96 not woking. :\
I'll try a clear tomorrow.
I need the dt2w!
Thanks
chicojfp said:
Dirty flash over @bpear96 not woking. :\
I'll try a clear tomorrow.
I need the dt2w!
Thanks
Click to expand...
Click to collapse
Do a clean installation. Just because they're all cm12 doesn't mean that it'll play nice when you go from a cm12 build to the next.
hoshhosh said:
Double tap is awesome on this build!
* No battery percentage here?
Tnx a lot for your work daleski75!
Click to expand...
Click to collapse
Download battery percentage from play store and enable it within he application.
Sent from my Nexus 6 using Tapatalk
System working
System working with clean flash install.
I will start the tests.. Where can we send feedback? in this thread?
Thanks?
chicojfp said:
System working with clean flash install.
I will start the tests.. Where can we send feedback? in this thread?
Thanks?
Click to expand...
Click to collapse
In the official thread.
Although, most of the times feedback is not required as these users are building from the source and aren't really contributing code and it is a preview build.
Sent from my Nexus 6 using Tapatalk
I'm really lost now - does anyone else have a problem with no cellular service on the Lollipop builds? I have tried three different ROMs, but none of them give me any service, sometimes I even get the "no SIM card inserted" icon in the taskbar.
Yesterday I wiped my phone completely through TWRP - wiped ROM, deleted data, and mounted the phone system to my computer - nothing was left except the folder TWRP.. Transferred the zip's, installed the CM12 build, and the same thing happened.
As soon as I install any CM11S ROMs, I get signal and LTE/3G/2G coverage as usual. I'm using "Telenor" (in Norway) as my service provider.
Is everyone else running a kernel, modem or anything else I have completely missed?
Thanks
Hardware keys stay on...
This is a great build with very little issues. However, I have noticed that after locking the screen sometimes the hardware keys stay lit.
Any idea why ambient display doesn't wake my phone when I pick it up? Boeffla kernel alpha 2
Got into a bootloop, flashed new build and now running well. Thanks
Anyone having problems with MMS, seems like I can only send and receive via Hangout. But through Google Messenger is a no go. Checked APN and everything.
Ambient display doesn´t work
How should ambient display work??
Does nothing, when picking my phone up.
OnePlus, clean install 12-20141119-unofficial bacon with 3.4.67 kernel version.
THX!
good build
What kernel works best with this rom in your personal experience?
inzaghi75 said:
Yes csn confirm that. But vlc player works.
Click to expand...
Click to collapse
inffy said:
I dirty flashed too. How do you test this music bug? Just try to play some music?
Click to expand...
Click to collapse
@inffy Just play rand'omly some mp3's, some work, some do not... Cant even use my old ringtone anymore
---------- Post added at 01:32 PM ---------- Previous post was at 01:27 PM ----------
SleemLDJ said:
That's the thing. I'm waiting for someone who has done a clean flash to confirm.
I already did a clean flash for 21st build. Don't wanna go thru set ups again...
Sad thing is I didn't test music playback on 21st build.... Did it work on that build?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
@SleemLDJ Clean flash here and only few mp3's work, not all. Spotify works ok.
New merge
Steve is putting in new stuff like 5 mins ago
random reboots
I'm getting random reboots in instagram on a clean flash as well just to confirmed. 22nd build
luv4greenleaves said:
I've noticed if I turn off ambient display my hardware buttons stay lit even more.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Same here, though I can't seem to find a fix.. Only workaround is using the on-screen buttons but I'd much prefer a fix!
hardware keys stay on in first lock
When Turn the screen off the hardware buttons keep ON.
Only turning the screen ON ena OFF again the hardware keys will turn off.
Issue in 20141122 build.
I'm using Firefox and the regular hardware buttons. I've affected the menu button to see last apps but Firefox still thinks I have the menu button activated, so he doesn't shows me the button for it's menu besides the tabs button.
Any ideas ?
Vibrate on touch off issue
Turning vibrate on touch off does not seem to be working. Running 21/11/14 - NEW Evening build.
VanirAOSP is a project coded by professional level developers and supported by the open source community that focus on bringing in improved versions of common features and improvements found in open source while focusing on writing new improvements and original coding with the highest standards
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
To Enable Alarm:
1. you can try going in sound setting, turn off and then on the link ringtone & notification vol. setting
2. go in the interruptions menu and turn off and then turn on the event & reminders setting
when it did not work for me, I performed these steps and after it worked. special thanks to @cappoccia for steps
CHANGES LOG
01/24/2015: compiled and booted without problems.
01/25/2015: released as initial build.
01/26/2015: read how to fix Superuser issue to run all application that required root.
01/30/2015: compile and upload the exodus for both i9105p.
04/01/2015:download VanirAOSP 5.1 source code.
04/05/2015:recompile it many times and got rom worked fine.
05/10/2015: updated to Android 5.1.1 R1 and everything works fine.
Click to expand...
Click to collapse
DOWNLOADS:
click here to download it.
10/05/2015: click here.
-Use 5.1's GAPPS.
Working:
Calls and data.
Audio (Playback & Recording).
Video (Playback & Recording).
Playback .
recording audio and video.
Mic.
Bluetooth.
Wifi.
AOSP Keyboard.
CM Theme Chooser.
All Display & Lights features (check the screenshot).
Vanir's options.
Not working
I didn't fetch any critical bug or features missed or doesn't working.
Instalaltion
Download rom, gapps then ChaiFire SuperSu then put into sdcard.
Reboot into twrp recovery.
Choose Wipe and select cache, system, data and swap to wipe.
Click on Install and add rom then select the gapps then add ChainFire root with the latest version that's compatible with Android Lollipop 5.0.2 that you can download from attacched files.
Install the packages, reboot.
Wait a few seconds to update the apps.
Enjoy
Click to expand...
Click to collapse
How To Install Root on 5.1:
Download UPDATE-SuperSU-v2.46.zip and copy to sdcard from attacched file.
Reboot into TWRP Recovery.
Click on Install.
Choose UPDATE-SuperSU-v2.46.zip.
Swipe to start flashing.
Reboot and install SuperSu's Chainfire application and run the script to
complete installation.
Click to expand...
Click to collapse
Installation Guide of i9105:
Take same rom.
extract updater-script in meta-inf and rename all s2vep to s2ve.
remove old updater-script and replace edited one.
Flash the rom then NFC Destroyer, enjoy.
Click to expand...
Click to collapse
Contributors
@haky86
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-01-04
Last Updated 2015-05-10
Reserved
Good to see that S2 plus's development has got a great pace.
Keep doing great work guys. :good:
Good job keep it up.
Very nice rom , no lagging , and batery life is nice ^^
naskodeuces said:
Very nice rom , no lagging , and batery life is nice ^^
Click to expand...
Click to collapse
so no lagging like CM12?sound good, that's why i love AOSP based roms instead of CM. more roms will be available next days
haky 86 said:
so no lagging like CM12?sound good, that's why i love AOSP based roms instead of CM. more roms will be available next days
Click to expand...
Click to collapse
Good work... What is exodus? Waiting for it and what is the roms that we can expect?
Good job Hakam!
cracker12 said:
Good work... What is exodus? Waiting for it and what is the roms that we can expect?
Click to expand...
Click to collapse
exodus have exodus panel and based on pure source and may have the stock launcher.
haky 86 said:
so no lagging like CM12?sound good, that's why i love AOSP based roms instead of CM. more roms will be available next days
Click to expand...
Click to collapse
No , for me not , it is really smooth, no problem with sound like in RR , or wifi problems , like i said battery is awesome , it was 100% at 6:00, and now is 63% ( 14:34) and my wifi is on all the time + music, whatsapp and facebook ?? Good work keep it up ??
naskodeuces said:
No , for me not , it is really smooth, no problem with sound like in RR , or wifi problems , like i said battery is awesome , it was 100% at 6:00, and now is 63% ( 14:34) and my wifi is on all the time + music, whatsapp and facebook Good work keep it up
Click to expand...
Click to collapse
is data connection works?
haky 86 said:
is data connection works?
Click to expand...
Click to collapse
Like a charm
naskodeuces said:
Like a charm
Click to expand...
Click to collapse
strange someone told me stop after switching to wifi any way, since you say is work, i can stay in peace xD, u tesed on i9105 or P?i need confirm for booting on i9105 guys.
haky 86 said:
strange someone told me stop after switching to wifi any way, since you say is work, i can stay in peace xD, u tesed on i9105 or P?i need confirm for booting on i9105 guys.
Click to expand...
Click to collapse
For me it is working , i tested it on P
Try to disable it a while then turn it back on
, lemme know if its still work
naskodeuces said:
No , for me not , it is really smooth, no problem with sound like in RR , or wifi problems , like i said battery is awesome , it was 100% at 6:00, and now is 63% ( 14:34) and my wifi is on all the time + music, whatsapp and facebook ?? Good work keep it up ??
Click to expand...
Click to collapse
What about the music in bluetooth headset is it have bug like rr ???
SH1M4BD3 said:
Try to disable it a while then turn it back on
, lemme know if its still work
Click to expand...
Click to collapse
Pls answer my qouestion in RR thread ?
---------- Post added at 05:36 PM ---------- Previous post was at 05:35 PM ----------
BECKHAM 7 said:
What about the music in bluetooth headset is it have bug like rr ???
Click to expand...
Click to collapse
Sry i dont have any Bluetooth headset :/
strange. data did not work for me.
i got 1905p. I check apn and it is ok but still no data connection.
Guys, flash Nebula kernel and test after.
guys about bugs i said are same of cm12
Sent from my VanirAOSP 5.0.2 GT-I9105P using XDA Free mobile app
NX (Nexus Experience) Rom is Marshmallow based on Cyanogenmod 13 which provides you great features on top of CM Features & other side make rom more Battery Friendly & Giving best Performance with Stock Nexus like Experience.
Join Google + Community For Instant Updates :: NX Roms Google + Community
Lead Developer :: Anderson Aragao (now also a part of Forever Alone Party = F.A.P.)
Most Imp. Features .:[/CENTER]
Android 6.0.1 R10 merged
Ambient Display :cyclops:
Ambient Display with Hand Wave & Pocket Mode
Install Motorola Apps Directly From Play Store [i.e. Moto Camera, Moto Gallery] :highfive:
Dark Theme
Lockscreen Shortcut
CM Theme Engine
Proximitiy Check before Waking Up [phone will not wake in pocket when accidental touch happens]
Other Useful Features .:
Wakelock Blocker
Notification Quick Pull Down
Hide Power Menu on Lock Screen
Double Tap 2 Sleep on Navigation bar
Battery Saver
Expanded Desktop
LCD Desnity
& Many More ........ Kernel Features are also Coming Soon .....
Bugs
None
_: Read Before Flashing :_
1) inbuilt super user works, just enable in Setting > Developer Options
2) If you flash any custom kernel then default D2W will not work.
3.) you can use any gapps or you can install NX Gapps Standard.
Flashing Info
UPGRADE FROM NX 10.x WORKS FINE! DO A FULL BACKUP BEFORE FLASH!
YOU CAN UPGRADE FROM NX LOLLIPOP! DO A FULL BACKUP BEFORE! If you get any issue or bootloop, do a clean install!
ROM is already Rooted and this is integrated with Privacy Guard and comes enabled by default.
I'm not responsible if you brick your device.
BEFORE PROCEED, DO A FULL BACKUP OF YOUR DEVICE!
Install instructions:
First install: Put ROM and NX GAPPS 1.2 for Marshmallow zips in Internal Storage, go to recovery, wipe System, Dalvik and Cache. Flash ROM + GAPPS and reboot. To avoid issues, I recommend wipe Data too but you can try a dirty flash. ROM is already rooted but you can download from Play Store or flash SuperSU too.
Upgrade install from R10.x: Put ROM and NX GAPPS 1.2 for Marshmallow zips in Internal Storage, go to recovery and flash ROM + GAPPS then reboot.
Upgrade install from R9.x: You can try to update from R9.8.x but if you get any issue, do a clean install.
If you prefer SuperSU over integrated ROOT, completely disable root access in Settings / Developer options, then flash SuperSU.
Downloads :
Changelog ::
*Welcome Dark theme
*Bring back some QS tiles
*Bring back Variable size pattern lockscreen
*Bring Lock screen shotcuts
*Bring Advanced IME settings
*Bring SystemUI Tuner
*Option to display headset icon when headphone is plugged
*Fix Power end call switch
*Some fixes and improvements in system
Download ::
Visit Website :: https://nxrom.us/motog.html
Rom/Kernel Source :: https://github.com/aragaoanderson
LOL. Shincan. One question. This ROM will nightly or weekly?
Sent from my Moto G using Tapatalk
indrasatrya said:
LOL. Shincan. One question. This ROM will nightly or weekly?
Sent from my Moto G using Tapatalk
Click to expand...
Click to collapse
Weekely
Good work thanks
Really nice rom.no issue till.
Just request to add more qs tile options.
Pls screenshot or video review
drgopi1234 said:
Pls screenshot or video review
Click to expand...
Click to collapse
Only if i had gf
drgopi1234 said:
Pls screenshot or video review
Click to expand...
Click to collapse
Video review wil be coming tomorrow #falcon reviews
Sent from my Moto G using Tapatalk
Any major bug pls reply I want to flash this build.
I have low data usage so want to confirm about rom
drgopi1234 said:
Any major bug pls reply I want to flash this build.
I have low data usage so want to confirm about rom
Click to expand...
Click to collapse
Here you go #falcon reviews
https://youtu.be/aR3HEOX7IkM
Sent from my Moto G using Tapatalk
drgopi1234 said:
Pls screenshot or video review
Click to expand...
Click to collapse
here's another poor screen record.
https://www.youtube.com/watch?v=jFCFfvC4WaM
---------- Post added at 06:32 PM ---------- Previous post was at 06:27 PM ----------
[/COLOR]
BhavikRB said:
Only if i had gf
Click to expand...
Click to collapse
sir, u did a amazing work I told ur previous threat. but I want to tell u about just one bug that I got. while phone ringing/vibrating (incoming call) the swipe to answer/reject does not works sometimes. its got stuck on incoming call screen.
network speed meter.... nt found in setting......
d2w non responsive sometime.anyone facing issue.
how i can removed google now launcher.when i tried to remove google app/now launcher causes bootloop.
I installed the ROM and have a display issue. The max dpi allowed to me is just 200. Any way to fix it?
chopradiv said:
I installed the ROM and have a display issue. The max dpi allowed to me is just 200. Any way to fix it?
Click to expand...
Click to collapse
I too faced this issue. I changed DPI first in build prop & then through display setting
mangesh511 said:
d2w non responsive sometime.anyone facing issue.
how i can removed google now launcher.when i tried to remove google app/now launcher causes bootloop.
Click to expand...
Click to collapse
it will work after few seconds of display off.
guys how to enable network traffic meter... in this rom... or any app....
love.thakur3 said:
guys how to enable network traffic meter... in this rom... or any app....
Click to expand...
Click to collapse
use gravitybox to customize the rom, You have tons of mods including the network traffic meter
I have nothing to do with this project or the development but I thought it may be helpful for people to be aware of this device being officially supported!!!
http://get.aospa.co/official/kugo
Use this thread to report your findings with this ROM.
1 hour I try this ROM all functions work perfect. And I love 3 finger swipe down to take screenshot.
how is the camera quality? Same as stock rom? Thanks
d_fens said:
how is the camera quality? Same as stock rom? Thanks
Click to expand...
Click to collapse
sorry mate i never use stock rom and camera in this rom work fine but it seem to take 2-3 sec. to save after take picture.
Does the fingerprint work in this rom???
chanti548 said:
Does the fingerprint work in this rom???
Click to expand...
Click to collapse
yes it's work.
anyone tested this rom? whats are the features? there seems to be nothing in the official site.
please post some screenshots
I've found self turn off and random restart now.
Muz Suriwong said:
I've found self turn off and random restart now.
Click to expand...
Click to collapse
Same here. Are you using it with Magisk at all?
Kianush said:
anyone tested this rom? whats are the features? there seems to be nothing in the official site.
please post some screenshots
Click to expand...
Click to collapse
this rom same as rom in this topic
https://forum.xda-developers.com/oneplus-3/oneplus-3--3t-cross-device-development/paranoid-android-7-0-2-aospa-oneplus-3t-t3615015
and here is reviews from androidpolice.com
http://www.androidpolice.com/2017/05/31/aospa-review-back-dead-thrilled/
---------- Post added at 11:17 AM ---------- Previous post was at 11:11 AM ----------
chadgauth said:
Same here. Are you using it with Magisk at all?
Click to expand...
Click to collapse
yes i use this rom with Magisk and with out it.Still self turn off same i've try many time.
chadgauth said:
Same here. Are you using it with Magisk at all?
Click to expand...
Click to collapse
I have them too (or at least, the phone seems to freeze pretty often, and then I need to force reboot). I don't use magisk but did install supersu zip from twrp.
I need my phone stable the next couple of weeks so I'm switching back to stock, but after that I am willing to debug if somebody knows how to.
Sorry about this noob question, after installing this rom, is there anyway to get back to stock sony rom and receive updates from sony??
I'm unable to use the fingerprint in this rom, the fingerprint option disappeared from the security menu,
chanti548 said:
I'm unable to use the fingerprint in this rom, the fingerprint option disappeared from the security menu,
Click to expand...
Click to collapse
Search in the OmniROM thread. A solution to this issue was discussed there.
https://forum.xda-developers.com/x-...om-omnirom-t3568559/post72495856#post72495856
What about photos quality and Hi Res Audio?
@chanti548 You can flash a firmware ftf-file:
https://easy-firmware.com/index.php?a=browse&b=category&id=18656
With the FlashTool:
https://developer.sonymobile.com/open-devices/flash-tool/use-the-flash-tool-for-xperia-devices/
But I don't know if you'll receive OTA updates again. Also I think the bootloader remains unlocked (although I could be wrong about this)
andTab said:
I have nothing to do with this project or the development but I thought it may be helpful for people to be aware of this device being officially supported!!!
http://get.aospa.co/official/kugo
Use this thread to report your findings with this ROM.
Click to expand...
Click to collapse
I loved this rom until it started to reboot randomly. I didn't even make it through the setup screen...
It is quite sad because I love AOSPA but I guess my G. Trend plus will be making a comeback with MIUI 7...
New build is up:
http://get.aospa.co/official/kugo
Sadly still with random reboots. I've noticed the reboots are more frequent when I play music (with the screen off), though I have not been able to cache a reboot when a logcat is running.
Also: The fingerprint sensor seems to be working only partially. When I unlock the phone using the fingerprint sensor, I need to put in considerable effort to get my finger recognized, whereas with the stock rom it gets recognized instantly. My banking app does not work with the fingerprint sensor either on this rom. I've noticed this behaviour on ALL non-stock roms I've tested (which is pretty much all of them).
edit: setting selinux to permissive does not circumvent random reboots...
Just installed. Some notes:
- Fingerprint sensor does not work for me
(Default) Camera:
- (16:9) Resolution is limited to 15.9MP
- Continuous shot crashes the camera, but:
- UbiFocus captures the pictures very quickly
- Image capture seems to be ACTUALLY INSTANTANEOUS! I mean right on press! I've never seen this before on this phone. Not on the stock camera, not on custom software. Holy crap, that's nice.
- Video capture stops right after trying to start it. No resolution seems to work. Might be the encoder configuration, but that is not available in this app.
- There are no manual settings other than exposure compensation and white balance
- There is no toggle for Camera2. Does this still use Camera 1?
I have not checked the actualy image quality yet, but the blazingly fast image capture is what will probably keep me on this ROM. The camera app coming with it seems to be a very good starting point for further development.
According to users from Xperia X, disable pocket detection could resolve the reboot prpblem. Anyone try that?
source: https://forum.xda-developers.com/showpost.php?p=73192234&postcount=16
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
What's working
Mostly everything except for those mentioned in not working list.
What's not working
Video recording (working but laggy if you want to watch it)
SELinux
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Changelog
Code:
[B]lineage-15.1-20180722-UNOFFICIAL-eagle.zip[/B]
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180707-UNOFFICIAL-eagle.zip[/B]
Fix low volume
Fix livedisplay
Fix kernel local version
Sync with latest LineageOS sources
Some other device and kernel stuff
[B]lineage-15.1-20180624-UNOFFICIAL-eagle.zip[/B]
Initial release
Troubleshooting
Video recording
Video recording is broken in stock camera, just install
https://play.google.com/store/apps/details?id=com.simplemobiletools.camera
as workaround for now.
Playstore show not certified
Try to clean app data and cache first, if its not working for any reason read this
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Low RAM Configuration
Add the four lines into your build.prop with any rootexplorer you want, save it and restart your phone to activate them.
Code:
# Low memory device
ro.config.low_ram=true
# Force high-end graphics in low ram mode
persist.sys.force_highendgfx=true
If you need more information read this
https://source.android.com/devices/tech/perf/low-ram#intro
sgspluss said:
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Information
This are unofficial builds made by myself, will fix things, resync and rebuild it if i'll find some free time.
What's working
Mostly everything.
How to install
1. Wipe system, data and both cache partitions
2. Install the ROM + GApps
3. Wipe again both cache partitions
4. Now you can boot to the system
Download
Unofficial LineageOS 15.1
sgspluss-gapps
Sources
github.com/sgspluss
Credits and Thanks
@sgspluss @Konstantinosj77 @galaxyfreak
Click to expand...
Click to collapse
did you fix some problems in this version?
i mean is there any different from the rom BETA 2?
and what abut laging? did you fix it?
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
sgspluss said:
Telephone works now, also timekeeping seems to work and not many lags faced yet.
Please try it on yourself, did not have much time to test every build because of my little family and work.
Every feedback is welcome!
Click to expand...
Click to collapse
great news..iam ready for start testing..i will report if i found somthing
hooooossamq said:
thank you by the way to complete bulding this rom.what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.
Click to expand...
Click to collapse
snap is better because it uses newer drivers and open source (like the rom itself). and there is no point if you add sony camera because it is an AOSP rom, it meant to be pure android (except lineage tweaks)
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
hooooossamq said:
what abt adding sony m2 stock cam app? from kitkat 4.4.4 maybe because its better than cam in v 5.1
Click to expand...
Click to collapse
Thats not that easy as you think, because need to port this app to the api, but apart of this i want to stay close as possible to lineage.
hooooossamq said:
Also @sgspluss , is this rom deodexed? if not, can you make it deodexed, it will make customisation easier
Click to expand...
Click to collapse
Afaik there will be no odex files, if there are one i will change it in next update. To be honest, did not check it.
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Hrustus said:
Very nice to see new build But unfortunately I'll have time to play with it in this or next weekend :/
@sgspluss do you know why Magisk don't work on previous builds? M2 is no longer supported by Magisk or it's just fixable in the next builds?
Click to expand...
Click to collapse
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
hooooossamq said:
after a test i notice these bugs:
1- laging so much after installing opera mini and es file Explorer.
2- over heating in charging bluged and using net for 10 minute.
3- in the screen setting / style/ auto day and night. itsnot working.
4- the lightbar not working even if i enable the light settings.
Click to expand...
Click to collapse
Are they also present in builds befor?
Sent from my athene using XDA Labs
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Click to expand...
Click to collapse
Unfortunately no, but maybe somebody else remember version. Hmmm... Actually I am not sure that Magisc was working on LineageOS or on Ressurection ROM...
sgspluss said:
Sadly its not fixed, just test it now on myself and magisk not working, do you know any version where its working befor?
Are they also present in builds befor?
Sent from my athene using XDA Labs
Click to expand...
Click to collapse
the lag is much more in your bulid..light bar was working in BEAT 2.
style day and night bug was present in BETA 2..
i was test ALPHA 4 before.every thing working of the bug i say before expact the light bar.and its the most smoth version.. its lagy.. but most smother than all
About problem with magisk, we are also unable to install the magisk manager will look into it whats the reason.
About lags and bugs its strange because i am using same sources, as you can read.
If Something not working logs are helpfull otherwise it takes more time to figure out whats wrong.
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Sent from my athene using XDA Labs
sgspluss said:
What you can do about lags, install supersu from lingeage 14.1 (currently the one from lineage 15.1 and magisk are broken), go into your build.prop, search ro.config.low_ram=true, remove this line and safe build.prop, now restart your phone and test if lags are better.
Click to expand...
Click to collapse
and here goes my report (very early report, i will add more information)
1-) without gapps, there is some frame dropping in animations and recent apps section (with or without android go mode) but it is same as beta 2, but a bit slower than 8.0 versions. i wonder is there a huge change under the hood between two versions
2-) no lag present in bootanimation, that's unexpected
3-) front camera video works
4-) dark mode works just fine
summary: our device can't handle gapps, that's what i see here. there are minimal frame droppings. also rom is odexed sadly
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Sent from my athene using XDA Labs
sgspluss said:
Just invest some minutes about the magisk problem, seems that we are not compatible yet or never was. But you can send the developer logs, he will look into it, it has nothing to do with rom, lucky me at this point.
About the .odex files that seems to be normal, also can be found on other devices, so there i can not do anything.
Also flashed Alpha4 doesnt be smoother its just uses more animations and some more graphic things related to not using go optimization, also takes more ram, because of not using go optimization so this will be preserved also in the future.
Click to expand...
Click to collapse
go optimization is better for our device for sure, but this recent apps lag holds me back. but without go and using microg, rom holds up pretty good actually.
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Sent from my athene using XDA Labs
sgspluss said:
As written bevor try to remove ro.config.low_ram=true from build.prop and tell me if this problems you faced will be fixed. All other go optimizations are not changeable manually.
If this will solve the problem, will remove it for future builds, thats fixed for all.
Click to expand...
Click to collapse
as i said before, i am using rom with low_ram=false, and there is less lag compared to go enabled mode.
hello
Me too "low_ram=false" make my m2 less laggy
Thank you for your work