Database Info

[ROM] [PAC] [4.4.4] - Galaxy ACE 3 LTE [UNOFFICIAL]

Succesfully compiled PAC rom for Galaxy ACE 3 LTE! It is compiled from CM11 device tree with slight modifications. Everything works like CM11, expect NFC! Rom can be used as a daily driver!
Note: PAC stands for Paranoid AOKP and CyanogenMod! It combines all the goodies in one ROM!
In my opinion it can be used as a daily driver!
Download link: https://mega.co.nz/#!F59GQLDS!ifQnca5_oRKc1VEIwcrBEbTorN024E1heQOTNOGN9vY
INSTALLATION
1.Reboot into recovery
2.Wipe data factory reset
3.Format system
4.Flash Rom
5.Flash Gapps
6.Reboot
For GT-S7275R ONLY
Do not enable PAC in black feature on settings, bugs will appear
Don't forget to say thanks
PS: I am not responsible for any damage to your device

Am installing now PAC ROM so, will taste it as long as i can handle my phone in daily use. Will report back soon.

1st bug and most importance, ROM doesn't go in to deep sleep. battery drain too fast. I think is kernel problem, need reconfigure.

This is from my phone
arrostos said:
1st bug and most importance, ROM doesn't go in to deep sleep. battery drain too fast. I think is kernel problem, need reconfigure.
Click to expand...
Click to collapse
My device seems to enter deep sleep, are you sure you had battery drain? maybe it was an process

Update
New release - 20140716
Change-log
-Using custom power HAL (Should improve battery)
-CM & AOKP sources update
-Audio config improvements and cleanup
If you are already on a PAC release you don't need to wipe anything!
Download: https://mega.co.nz/#!85USyJIQ!pDku4mr5Vvk-fmZbSNsL8KvP8klPEgwqczV5CdqDVcs

kostoulhs said:
New release - 20140716
Change-log
-Using custom power HAL (Should improve battery)
-CM & AOKP sources update
-Audio config improvements and cleanup
If you are already on a PAC release you don't need to wipe anything!
Download: https://mega.co.nz/#!85USyJIQ!pDku4mr5Vvk-fmZbSNsL8KvP8klPEgwqczV5CdqDVcs
Click to expand...
Click to collapse
Very nice job, i didn't test it yet, but want to tell some bugs on preview release.
Touch sensitive is not good enough, some times need to touche twice on same place to can recognize.
Had 3-4 times crash, on Torch, wile was trying to put lite one, but after the crash is started to work okay. Same happened on GPS Location, wile switching on/off.
Some times the home button doesn't wake up the phone, navigation buttons are lighting but screen doesn't turn on.
And about Deep Sleep, yes after some restarts, now is working
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
BTW, the phones works very fast with CM, it' amazing so much improve against Touch Wiz

arrostos said:
Very nice job, i didn't test it yet, but want to tell some bugs on preview release.
Touch sensitive is not good enough, some times need to touche twice on same place to can recognize.
Had 3-4 times crash, on Torch, wile was trying to put lite one, but after the crash is started to work okay. Same happened on GPS Location, wile switching on/off.
Some times the home button doesn't wake up the phone, navigation buttons are lighting but screen doesn't turn on.
And about Deep Sleep, yes after some restarts, now is working
---------- Post added at 07:48 PM ---------- Previous post was at 07:43 PM ----------
BTW, the phones works very fast with CM, it' amazing so much improve against Touch Wiz
Click to expand...
Click to collapse
Thanks for feedback :good:

The problem is on android systemui, some times when am trying to open a new application, the message popa-up "Unfortunately, the process com.android.systemui has stopped. Blame the Split Screen"

arrostos said:
The problem is on android systemui, some times when am trying to open a new application, the message popa-up "Unfortunately, the process com.android.systemui has stopped. Blame the Split Screen"
Click to expand...
Click to collapse
did you enable Pac in black? if yes disable it! it is a buggy feature

kostoulhs said:
did you enable Pac in black? if yes disable it! it is a buggy feature
Click to expand...
Click to collapse
Yes, it was enabled. I think this is response on wake up phone too.
What, about the camera, whenever i press Volume up or down, it's taking a picture and there is no zoom. It's CM camera working like that?

arrostos said:
Yes, it was enabled. I think this is response on wake up phone too.
Click to expand...
Click to collapse
Maybe, I like Pac in black, but i do not use it because of the bugs

For Gapps, we use the same as CM11, right?
Enviado desde mi GT-S7275R usando Tapatalk 2

Arcanister99 said:
For Gapps, we use the same as CM11, right?
Enviado desde mi GT-S7275R usando Tapatalk 2
Click to expand...
Click to collapse
yes, right but you can also use lite gapps from here which are ART compatible
Link: http://forum.xda-developers.com/showthread.php?t=2608800

arrostos said:
Yes, it was enabled. I think this is response on wake up phone too.
What, about the camera, whenever i press Volume up or down, it's taking a picture and there is no zoom. It's CM camera working like that?
Click to expand...
Click to collapse
!!

arrostos said:
!!
Click to expand...
Click to collapse
For camera try using a third party app, i think CM camera app does not zoom

kostoulhs said:
For camera try using a third party app, i think CM camera app does not zoom
Click to expand...
Click to collapse
I tried to install google camera hd camera and Camera JB+, the same problem, there is no zoom function. but is ok, it's not so important problem.
One more problem with camera, when you rotating the camera is freezing especially on video recording.

New release
New build 20140720
Changelog (Same as CM)
Voip Fix
CM and PAC source Update
Kernel Sources Update
Add Dock Headset to audio policy
Download Link: https://mega.co.nz/#!cld2DbZZ!v7sbR4IHLqM5GKv2xPU-edkfTxz6BCNXHpok-tPzlUE

GT-s7272
Can you modify them to work on Gt-S7272

CartoonizedAmr said:
Can you modify them to work on Gt-S7272
Click to expand...
Click to collapse
Absolutely different chipset, impossible, for me at least

kostoulhs said:
Absolutely different chipset, impossible, for me at least
Click to expand...
Click to collapse
plz That's easy for you, and this is open source http://opensource.samsung.com/reception/receptionSub.do?method=search&searchValue=GT-S7275

[Q&A] [DAILY] - Stock UNOFFICIAL CM12 Builds

Q&A for [DAILY] - Stock UNOFFICIAL CM12 Builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [DAILY] - Stock UNOFFICIAL CM12 Builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Freddy1X said:
Ok guys. Awesome, double tap to wake is back! Also this build working fine with the code *#*#4636#*#*. So kudos! :good::good::good:
Click to expand...
Click to collapse
Double tap is awesome on this build!
* No battery percentage here?
Tnx a lot for your work daleski75!

hoshhosh said:
Double tap is awesome on this build!
* No battery percentage here?
Tnx a lot for your work daleski75!
Click to expand...
Click to collapse
Looks like they took it out and I think it's much better that way!

Dirty flash over @bpear96 2014-11-19 build not woking
Dirty flash over @bpear96 not woking. :\
I'll try a clear tomorrow.
I need the dt2w!
Thanks

chicojfp said:
Dirty flash over @bpear96 not woking. :\
I'll try a clear tomorrow.
I need the dt2w!
Thanks
Click to expand...
Click to collapse
Do a clean installation. Just because they're all cm12 doesn't mean that it'll play nice when you go from a cm12 build to the next.
hoshhosh said:
Double tap is awesome on this build!
* No battery percentage here?
Tnx a lot for your work daleski75!
Click to expand...
Click to collapse
Download battery percentage from play store and enable it within he application.
Sent from my Nexus 6 using Tapatalk

System working
System working with clean flash install.
I will start the tests.. Where can we send feedback? in this thread?
Thanks?

chicojfp said:
System working with clean flash install.
I will start the tests.. Where can we send feedback? in this thread?
Thanks?
Click to expand...
Click to collapse
In the official thread.
Although, most of the times feedback is not required as these users are building from the source and aren't really contributing code and it is a preview build.
Sent from my Nexus 6 using Tapatalk

I'm really lost now - does anyone else have a problem with no cellular service on the Lollipop builds? I have tried three different ROMs, but none of them give me any service, sometimes I even get the "no SIM card inserted" icon in the taskbar.
Yesterday I wiped my phone completely through TWRP - wiped ROM, deleted data, and mounted the phone system to my computer - nothing was left except the folder TWRP.. Transferred the zip's, installed the CM12 build, and the same thing happened.
As soon as I install any CM11S ROMs, I get signal and LTE/3G/2G coverage as usual. I'm using "Telenor" (in Norway) as my service provider.
Is everyone else running a kernel, modem or anything else I have completely missed?
Thanks

Hardware keys stay on...
This is a great build with very little issues. However, I have noticed that after locking the screen sometimes the hardware keys stay lit.

Any idea why ambient display doesn't wake my phone when I pick it up? Boeffla kernel alpha 2

Got into a bootloop, flashed new build and now running well. Thanks
Anyone having problems with MMS, seems like I can only send and receive via Hangout. But through Google Messenger is a no go. Checked APN and everything.

Ambient display doesn´t work
How should ambient display work??
Does nothing, when picking my phone up.
OnePlus, clean install 12-20141119-unofficial bacon with 3.4.67 kernel version.
THX!

good build
What kernel works best with this rom in your personal experience?

inzaghi75 said:
Yes csn confirm that. But vlc player works.
Click to expand...
Click to collapse
inffy said:
I dirty flashed too. How do you test this music bug? Just try to play some music?
Click to expand...
Click to collapse
@inffy Just play rand'omly some mp3's, some work, some do not... Cant even use my old ringtone anymore
---------- Post added at 01:32 PM ---------- Previous post was at 01:27 PM ----------
SleemLDJ said:
That's the thing. I'm waiting for someone who has done a clean flash to confirm.
I already did a clean flash for 21st build. Don't wanna go thru set ups again...
Sad thing is I didn't test music playback on 21st build.... Did it work on that build?
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
@SleemLDJ Clean flash here and only few mp3's work, not all. Spotify works ok.

New merge
Steve is putting in new stuff like 5 mins ago

random reboots
I'm getting random reboots in instagram on a clean flash as well just to confirmed. 22nd build

luv4greenleaves said:
I've noticed if I turn off ambient display my hardware buttons stay lit even more.
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
Same here, though I can't seem to find a fix.. Only workaround is using the on-screen buttons but I'd much prefer a fix!

hardware keys stay on in first lock
When Turn the screen off the hardware buttons keep ON.
Only turning the screen ON ena OFF again the hardware keys will turn off.
Issue in 20141122 build.

I'm using Firefox and the regular hardware buttons. I've affected the menu button to see last apps but Firefox still thinks I have the menu button activated, so he doesn't shows me the button for it's menu besides the tabs button.
Any ideas ?

Vibrate on touch off issue
Turning vibrate on touch off does not seem to be working. Running 21/11/14 - NEW Evening build.

DT2W

Hey guys.
First of all, I would love to express my appreciation to those who selflessly help the army of handless and brainless users of the amazing phone which we're all united here because of.
Secondly, I would like to leave a question.
Is there any way to implement the double-tap-to-wake with XZP on the stock firmware?
I'm pretty sure this gesture is available on most FWs based on the "pure" android, which also means:
-gb DRM
-gb stock camera app
-gb nice video recording with the best stabilization
-farewell 960fps video shooting
-forget about the OTA updates
...fairly, at the same time there are many benefits, like
-gCam, RAW photo/video shooting
...xposed, Viper4Android
etc. But, still, what exactly is the problem with the XZP that it doesn't support the DT2W feature?

You can get dt2w using the Androplus kernel. However, that requires you to unlock the bootloader.
I read that Sony just removed the feature itself. I miss that feature on the Z2 and Z5, but imo it's fine since my phone's screen kept turning on in my pocket.

iArvee said:
You can get dt2w using the Androplus kernel. However, that requires you to unlock the bootloader.
I read that Sony just removed the feature itself. I miss that feature on the Z2 and Z5, but imo it's fine since my phone's screen kept turning on in my pocket.
Click to expand...
Click to collapse
-Androplus kernel, isn't it too old by now?
-sony must be really so stupid to not be aware that they can implement the proximity sensor check on dt2w, which doesn't let the screen turn on even if the power btn is pressed while the phone is in the pocket or elsewhere when it really shouldn't turn on the screen because of an accidental activity.

saved-j said:
-Androplus kernel, isn't it too old by now?
-sony must be really so stupid to not be aware that they can implement the proximity sensor check on dt2w, which doesn't let the screen turn on even if the power btn is pressed while the phone is in the pocket or elsewhere when it really shouldn't turn on the screen because of an accidental activity.
Click to expand...
Click to collapse
No. It's constantly being updated. The thread isn't active, but Androplus is constantly updating it. https://kernel.andro.plus/yoshino.html

iArvee said:
No. It's constantly being updated. The thread isn't active, but Androplus is constantly updating it. https://kernel.andro.plus/yoshino.html
Click to expand...
Click to collapse
so, anyone can:
-unlock their bootloader
-install the androplus kernel even with the latest ***145 fw
-DRM patch - xperifix / smth els
-> install magisk, xposed, etc etc ?
do you personally prefer the stock fw, or do you use the pure android (aosp/else) ?

saved-j said:
so, anyone can:
-unlock their bootloader
-install the androplus kernel even with the latest ***145 fw
-DRM patch - xperifix / smth els
-> install magisk, xposed, etc etc ?
do you personally prefer the stock fw, or do you use the pure android (aosp/else) ?
Click to expand...
Click to collapse
Yes, basically anyone can do that.
I personally prefer the stock fw. Mostly because of the camera. AOSP doesn't use Sony's camera api, sooo the image quality won't be the same. Besides, you won't be able to use the 960 fps super-slomo either.
Even on older phones, I've always preferred stock fw. It's close to pure android anyway. I have tried AOSP builds before, and always ended up going back to stock.

iArvee said:
I personally prefer the stock fw.
Click to expand...
Click to collapse
Could you please remind me what's the last XPOSED- compatible FW build ?
...figured out: 12.75.
get it here:
https://forum.xda-developers.com/xz-premium/how-to/sony-xperia-xz-premium-firmware-t3707011

I use gravity screen app to wave above the screen to turn it on instead of double tap to wake. Has more helpful features too.

Waveup wakes the screen and is almost the same as DT2W. It has lots of positive feedback from the XZ1c thread.

http://bbs.gfan.com/android-9538931-1-1.html
If you can translate,understand and try, maybe it works.
With regard to waking up the phone with the proximity sensor it is already possible to do so with mrom

Elysiumx said:
http://bbs.gfan.com/android-9538931-1-1.html
If you can translate,understand and try, maybe it works.
With regard to waking up the phone with the proximity sensor it is already possible to do so with mrom
Click to expand...
Click to collapse
Do you have access to the files? or just that page you shared? All the files are there to download, if you can get them I will try.
@uditrawat @jianlin3062 if you have the time could you d/l the files from the link above please?

Beetle84 said:
Do you have access to the files? or just that page you shared? All the files are there to download, if you can get them I will try.
@uditrawat @jianlin3062 if you have the time could you d/l the files from the link above please?
Click to expand...
Click to collapse
I will reupload for u, give me 10 minutes

Elysiumx said:
I will reupload for u, give me 10 minutes
Click to expand...
Click to collapse
Thanks mate
I have tampermonkey add-ons in chrome so I can download from pan.baidu but now they have put a login request before downloading that I can't beat haha

Beetle84 said:
Thanks mate
I have tampermonkey add-ons in chrome so I can download from pan.baidu but now they have put a login request before downloading that I can't beat haha
Click to expand...
Click to collapse
https://drive.google.com/file/d/10kHlLqTPRNszOKClHcTMW5vG7xIOchRK/view?usp=sharing
Here it is!
Sorry, link is working now

Elysiumx said:
https://drive.google.com/open?id=10kHlLqTPRNszOKClHcTMW5vG7xIOchRK
Here it is!
Click to expand...
Click to collapse
Its private mate, I sent a request for access.
Edit
Got it, will let you know how it goes.

any guy have these files for download??
F-ever ROM http://bbs.gfan.com/android-9536412-1-1.html
and
phill navigation http://bbs.gfan.com/android-9525759-1-1.html

megaxp said:
any guy have these files for download??
F-ever ROM http://bbs.gfan.com/android-9536412-1-1.html
and
phill navigation http://bbs.gfan.com/android-9525759-1-1.html
Click to expand...
Click to collapse
The rom is too heavy for me to upload (****ty internet)
Second link :
https://drive.google.com/file/d/1Vu7Bz6K_6Y4_6cDdPq2o1KFHW7n9F6ml/view?usp=sharing

Elysiumx said:
The rom is too heavy for me to upload (****ty internet)
Second link :
https://drive.google.com/file/d/1Vu7Bz6K_6Y4_6cDdPq2o1KFHW7n9F6ml/view?usp=sharing
Click to expand...
Click to collapse
thanks!!
i share new link download f-rom https://f-ever.cn/download/rom/xzp/XZP_FeverMod_MY_47.2.A.4.41.zip

MiUI 10 for Cool 1 Dual v8.7.26 STABLE

Note:- Since it is my first post, links have been disabled my XDA TEAM, so please copy paste in your browser to open. Thank You for understanding
Hi guys!! Whats up. This is Shwetank here from Tech Stuff. Most of you might know me. For the ones who don't know me, please search on YouTube as "Tech Stuff".
This ROM is a port from Xiaomi Redmi Note 3 Pro(Kenzo)'s MiUI 10 V8.7.26 Chinese Alpha. And that's why there are only 5 languages in this ROM including English, Mandarin.......
I want to thank @ycjeson for his various libs to make the ROM run at a very stable condition.
Since this ROM was Chinese, it took me a lot of time to remove all the Chinese Bloatware and add Google Apps in it.
What's Working:---
1) EVERYTHING
Bugs:-----
1) VoLTE is not working VoLTE working in new version. Check here
2) GPS is not very accurate ( I'm working to fix that) ISSUE FIXED
Just Open the compass app and rotate your phone several times in all the directions along its axis. And restart your phone. GPS will work fine.
3) Brightness Issue (Completely dark in lowest level, Not too bright at Highest level. Solution to this issue is using Boot Shell method which can be found on my YouTube Channel.
Just disable auto brightness to get stock ROM like brightness
If you get any other issues, comment down below....
Download Link:--https://androidfilehost.com/?w=files&flid=279792
Donation:--
If you liked my work and if you want to donate, then that will be highly appreciated
Pay pal eMail- [email protected]
UPI address- [email protected]
Note:-- I'll not be responsible if anything wrong happens to your device during the process.
Installation Video- https://youtu.be/08YRFj_FtsI

:good:...cool bro

Fix
First fix all the bugs then i will definitely donate you.

andruha10010 said:
:good:...cool bro
Click to expand...
Click to collapse
Thanks. Hope you've liked the ROM ?

amitb3669 said:
First fix all the bugs then i will definitely donate you.
Click to expand...
Click to collapse
Fixed GPS and highest brightness issue.
Only VoLTE needs to be tested.
Everything is working fine.

Marshmallow?
Is this Marshmallow?
IR blaster working?
SLR working?
Installation instructions?

zekedran said:
Is this Marshmallow?
IR blaster working?
SLR working?
Installation instructions?
Click to expand...
Click to collapse
Yes. It's marshmallow. No SLR camera.
Install it over Android 6. Wipe everything except internal storage> flash it

you can read more about the installation please. Installed the firmware and the system does not boot, just reboots into the recovery. What to do?

romanov.zheka13 said:
you can read more about the installation please. Installed the firmware and the system does not boot, just reboots into the recovery. What to do?
Click to expand...
Click to collapse
Did you install this over Jui??

techstuff_18 said:
Did you install this over Jui??
Click to expand...
Click to collapse
no, of course, on EUI.

romanov.zheka13 said:
no, of course, on EUI.
Click to expand...
Click to collapse
Wipe everything and try flashing again.
Because for most of us, this process worked.
If you're stuck at mi logo, then press the power button for 10 seconds to boot again

Google Contact has issued
I cant sync google contacts. How to fix that.

Multiscreen?
Does this have the multi screen option?

bonsoljoshua said:
Does this have the multi screen option?
Click to expand...
Click to collapse
yes

Hi, rom looks great but I have brightness problem.
Disabled auto brightness, slider to max but still very dark.
c106 model

mulyono24 said:
I cant sync google contacts. How to fix that.
Click to expand...
Click to collapse
Hello, I've released a new version which has contacts sync. Please download and use that
https://forum.xda-developers.com/android/general/miui-10-v8-8-7-volte-cool-1-dual-t3828523

Pls halp me to install magisk in this room pls halp

Cool 1 camera
Please tell me how to install cool 1 camera in this miui 10

is the camera app in this rom has the slow motion and 4K support ??

Hi,
Is this ROM for the LeEco Cool 1 C103 or for the LeEco Cool 1 C106?
Thank you

Best Camera App (/mod) for Lineage OS 15.1 Oreo 8.1?

Hi, i've installed the last update of Lineage OS (8.1), but the camera app is too bad. I tried with some porting of Google Camera etc, but most of them crash for different reasons and I did't find a good solution.
Is there a camera app, or a zip mod that I can install by recovery, to get a better shot (or at least, like the stock app of the Samsung Experience)?

i'm using gcam mod from this thread : https://forum.xda-developers.com/showthread.php?p=77595226
Sent from my SM-G935F using Tapatalk

dhio.sc said:
i'm using gcam mod from this thread : https://forum.xda-developers.com/showthread.php?p=77595226
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Which version do you use? the last one?

Storm937 said:
Which version do you use? the last one?
Click to expand...
Click to collapse
I'm using : GCam_5.1.018.177470874.41362666_N6_1.8.apk (IDan, 2018-09-12, exynos, changelog)
so far have no problem with regular photos (just potrait photos/selfie), without any changes on option.
Sent from my SM-G935F using Tapatalk

dhio.sc said:
I'm using : GCam_5.1.018.177470874.41362666_N6_1.8.apk (IDan, 2018-09-12, exynos, changelog)
so far have no problem with regular photos (just potrait photos/selfie), without any changes on option.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
there's no portrait mode in this version :/
edit: not true, lol, is there

I use this version from miniuser:
https://drive.google.com/file/d/1xH3yLwrt5ZIkcTqGg-xxepHHMd5W8YfF/view?usp=sharing
Works great for me. Make sure the gcam is set to Nexus 6 Hdr+ auto ( settings-> advanced-> config camera hdr+).
For video recording you will have to select camcorder.h265 in developer settings (settings -> developer settings)
Here is a pdf from IDan with info about the gcam:
https://drive.google.com/file/d/13AmdLB0E3z-e7ZFhFnm97-LYgc_63cCC/view?usp=sharing

BarryPooter said:
I use this version from miniuser:
https://drive.google.com/file/d/1xH3yLwrt5ZIkcTqGg-xxepHHMd5W8YfF/view?usp=sharing
Works great for me. Make sure the gcam is set to Nexus 6 Hdr+ auto ( settings-> advanced-> config camera hdr+).
For video recording you will have to select camcorder.h265 in developer settings (settings -> developer settings)
Here is a pdf from IDan with info about the gcam:
https://drive.google.com/file/d/13AmdLB0E3z-e7ZFhFnm97-LYgc_63cCC/view?usp=sharing
Click to expand...
Click to collapse
When I tap on switch camera, the app crashes. is there a fix?

Can't seem to find one that will open
Hi
I yesterday installed lineage 15.1 on my s7 Edge.. What a fantastic rom. It feels so much faster and smoother to me than stock oreo.
I have installed it with no gapps and have rooted . I wanted to use Google camera as a replacement but every one I have tried force closes immediately (must have tried 20 or more based on recommendations here, in reddit and elsewhere).
Any suggestions on how to get this working? What puzzles me is that others seem to have it working. Maybe because I haven't flashed gapps?
Thanks in advance

Whatsapp and Instagram camera issue - bad quality
Semi OT: is there a fix for the bad processing and quality of the Whatsapp and Instagram (specially with the Stories) camera?

With android oreo you need to have the "google service framework" apk installed for google apps. You can install the attached app or you can search for it on apkmirror. After installation you can freeze the app with titanium backup.
Boo222444666 said:
Hi
I yesterday installed lineage 15.1 on my s7 Edge.. What a fantastic rom. It feels so much faster and smoother to me than stock oreo.
I have installed it with no gapps and have rooted . I wanted to use Google camera as a replacement but every one I have tried force closes immediately (must have tried 20 or more based on recommendations here, in reddit and elsewhere).
Any suggestions on how to get this working? What puzzles me is that others seem to have it working. Maybe because I haven't flashed gapps?
Thanks in advance
Click to expand...
Click to collapse

Storm937 said:
Semi OT: is there a fix for the bad processing and quality of the Whatsapp and Instagram (specially with the Stories) camera?
Click to expand...
Click to collapse
I think not, as of for now, but the dev had already found the problem and made some improvement, but still in progress, hopefully in the next LOS update there will be good news for camera.
-update-
The update for LOS is done already, you might wanna try do dirty flash over existing build. and update here for the result (i can't update right now).
Sent from my SM-G935F using Tapatalk

Use this Mod, everything is working, including lens blur, portrait and slowmo:
https://forum.xda-developers.com/ga...eras-ports-t3778837/post77512040#post77512040

How's the battery life compared to stock?

No updates?
Which version gcam will work on Lineage 16? (I have a black screen or FC with links here)
patsonator said:
How's the battery life compared to stock?
Click to expand...
Click to collapse
I wouldn't say that there is a very big difference. ( 30+ minutes on lineage)

BatZzn said:
Use this Mod, everything is working, including lens blur, portrait and slowmo:
https://forum.xda-developers.com/ga...eras-ports-t3778837/post77512040#post77512040
Click to expand...
Click to collapse
It is discountinued

Boo222444666 said:
Hi
I yesterday installed lineage 15.1 on my s7 Edge.. What a fantastic rom. It feels so much faster and smoother to me than stock oreo.
I have installed it with no gapps and have rooted . I wanted to use Google camera as a replacement but every one I have tried force closes immediately (must have tried 20 or more based on recommendations here, in reddit and elsewhere).
Any suggestions on how to get this working? What puzzles me is that others seem to have it working. Maybe because I haven't flashed gapps?
Thanks in advance
Click to expand...
Click to collapse
I don't think that's the problem, I flashed gapps and there isn't any camera app in app drawer. So, I am not able to use camera app and flashlight.