Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
same issue
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Ces123 said:
Hi
I cannot get my Samsung Galaxy Tab 7.0 Plus (GT-P6200) to boot in recovery mode.
I tried the following:
1) Switch off the Tab.
2) Press the Power + Volume Up buttons simultaneously until I see the "Samsung Galaxy Tab 7.0 Plus" screen, then release the Power button and keep pressing the Volume Up button. The tab then get's stuck on the Samsung screen, even if I release the Volume Up button. It stays on this screen indefinitely, only option is to reboot by keeping the power button pressed for 5 seconds.
Any help will be appreciated.
Thanks!
Click to expand...
Click to collapse
Same problem
any help ???
On which verison thar ur on???? have u tried to wiping data in stock recovery
??
same problem I'm having with my Samsung Gt-p6200, it just boot-loops to the "samsung galaxy tab 7.0" boot loading screen and hangs.. these happened after i flashed my firmware from stock honeycomb to jellybean(the austria firmware, i think that's been posted in this forum).
here's what happened before the problem:
-I flash the stock honeycomb firmware with the jellybean one that i found here..
-after i flashed using ODIN, the new firmware works great, i was even informed that i have free 50GB worth of dropbox space,
the file was named P6200XXMC3_P6200OXAMC3_ATO
- I have used it for a day, until the battery drains and i have to charge, but when i opened it again, it already does this "boot loop" problem
- i have tried flashing CWM with ODIN(as i've read here somewhere that it might help) and do that wipe cache and factory reset thing but that didnt help solved the problem.
hope anyone could help me, im also thinking flashing it back to it's original stock firmware but I dont have a backup of that and I dont know where to get one, I've been searching the net for two days for that stock rom but all i found are the new jellybean ones and some old ones but is uploaded to hotfile which is now deleted or locked.
I hope you guys could help me out and thanks in advance!
try flashing a new , latest firmware on odin
just try it.
ovox0 said:
I am having the same issue as well. My tab gets stuck on the "Samsung Galaxy Tab 7.0 Plus" screen and does not move on from that. When i try to boot in recovery mode the screen is just black and slightly illuminated. Please help
Click to expand...
Click to collapse
Hello guys! Im also having this same issue.
*Using the same firmware that was posted here in xda because i was having trouble downloading those official jellybean firmwares
*The battery got drained
then if i charge it, it will remain in a "blank slightly illuminated screen"
* after a few munutes, the tab gets really warm.
*but if i dont charge it, it will get drained again because it keeps on turning on itself back to this time to the "galaxy tab plus screen"
I cant access recovery mode.
I can access odin mode and can flash successfully with cwm or the same firmware back but the problem still persist.
I havent tried other firmwares though.
4 days passed already and i cant figure this out
Please help
So I had this happen to me yesterday, where it rebooted randomly on me, only to freeze on the Galaxy Tab 7.0 Plus screen. I had custom recovery (TWRP) don't know if that matters, but I was able to access it by holding Power+UpVol but keep it held. It would freeze on the same spot but since I was still holding the keys it reboots a second time and this time it would go into recovery.
I then wipes cache and dalvik, no go. Sadly did a full wipe. Still no going past the tab plus text. So I flash MF1 official 4.1.2 firmware (I was previously on 4.1.2 UK official) still no go. Put in latest 2.8 TWRP and booted into it still with some trouble as I mentioned above. Did another wipe and it then hung on blank screen or so I thought. Took a long time to boot and after a long time, and the Android is upgrading message, by some weird chance I was on the MF1 official rom but all my apps settings everything was saved.
Working 100% now and I still don't really know what the hell happened. But if this helps anyone then all the better!
My samsung p6200 is woking almost fine but i am not able to go into the download mode when i press volume down button and power the screen is at samsung logo it stays for a while and then it restarts from there,its the stock rom that's messd up i belive any help how to go into downlod mose other way would b apriciated
My rooted samsung galaxy tab 2 P3100 stuck at battery loading logo (see Image). I was restoring my nandroid backup from ClockWorkMod recovery. My device was having CyanogenMod 10.1 rom installed. When i was restoring nandroid backup, boot.img is successfully restored. But when it comes to system.img, it fails. After that bettery gets over an device get switched off. Now, when I am trying to start device on charging or without charging, it is not responding to any key press or any key combination (like Power button + Volume Up/down). the only thing it shows is battery loading ( see Image)
Hope I'll get help.. N thankss in advance.
Do you have any charge lwdr on the battery? If so unplug a thw cord from thw tablet. Then press and hold the power key. If the tablet cuts off after holding the power for what seems like an eternity. Then try holding the buttons for recovery while repeating the power button from before. I had a problem when I first ran cyanogen and had to the above method to start over. Once in recovery do a full wipe and reinstall the rom and you should be good to go. Hope this helps
Sent from my SCH-I605 using xda app-developers app
My daughters s3 mini has stopped working.
When you hold down the power button it gives a tiny vibration and the samsung logo comes on the screen, after that it goes black and then goes through the same process again (small vibration, s3 logo and model, then clack again)...
It seems to just loop on this over and over again...
I cannot get into the boot menu but can get into the download menu so have followed instructions and rooted it in odin... however, although that was successful) it still wont boot.
I am thinking there is an issue with the boot sequesnce?
I would love if someone has any other suggestions?
Thank you.
Seems like you got a bootloop..
Try flashing the official firmware again using ODIN.
All the firmwares van be found here : http://www.sammobile.com/firmwares/
Sent from my Nexus 4 using xda-developers app
lydanial said:
My daughters s3 mini has stopped working.
When you hold down the power button it gives a tiny vibration and the samsung logo comes on the screen, after that it goes black and then goes through the same process again (small vibration, s3 logo and model, then clack again)...
It seems to just loop on this over and over again...
I cannot get into the boot menu but can get into the download menu so have followed instructions and rooted it in odin... however, although that was successful) it still wont boot.
I am thinking there is an issue with the boot sequesnce?
I would love if someone has any other suggestions?
Thank you.
Click to expand...
Click to collapse
Quick thing to try. When you hold down the vol down to go into download mode and it asks if you're sure you want to go into download mode, choose CANCEL instead and see if it boots. That sometimes knocks it out of the loop.
Bill
I have galaxy tab p6200. I had flashed the 4.4 omni rom available on XDA forums for p6200. It worked fine for about a month. Then one fine day, my tab did not boot up. I pressed the power button for about 60 sec, but still refuses to switch ON. I tried going to recovery and also to download mode, but the tab doesnt boot in either of these options.
But when I plugged the tab to my charger it showes the charging symbol and then when i go into recovery mode it boots up. But screen flicers and dies.
PLS Help me.....
I was following this the Cyanogen install directions for the p5110. When I to the section on downloading the recovery image, I headed to Clockworkmod but didn't scroll down far enough. The end result, I've installed the recovery for the Samsung Galaxy Tab _1_ 10.1 (wifi) onto my Galaxy Tab _2_ 10.1 (GT-P5100).
It's now stuck in a boot loop. Holding down power reboots to the Tab 2 10.1 screen, but holding the volume down/up buttons in various timings with the power button doesn't get me back into Download mode, it just comes back to the same Tab 2 10.1 screen over and over. I cannot get the device to power off completely, it just boots to the 10.1 screen again.
Is there any way to recover my device or have I bricked it?
After trying repeatedly to get back into download mode, I gave up for a few hours and came back once the battery had died.
After charging the battery for a while on a wall plug I tried to boot into download mode. This caused the same problem as before.
I thought I'd check to see if the USB was even visible within Linux on a PC so attached the USB cable and powered on. Magically, after a few iterations, it booted to the OS.