To prevent new users asking the same questions again and again, i decided to write this little FAQ and introduction about ROM flashing.
To all of you who are new to ROM flashing: Don't mind to ask, we all will help you if possible, but you should understood that it is annoying when the same question is asked 20 times a week. So please first search, then ask. Thank you.
If someone finds an error please do not post it, just send me a pm and I will correct it. Additional FAQ entries will be added regulary. If someone likes me to add a question, please send the question and the answer to me via PM and i will add it asap.
Thank you to the whole community, because without all of your information, this FAQ could not be possible.
If you are new to ROM flashing, please read this thread. It will give you information about your device and a short introduction on how to flash another ROM to your phone.
Below you will find the ROM flashing FAQ and the Introduction to ROM flashing.
Please feel free to add links to this thread to your signature using the following code:
[b][url=http://forum.xda-developers.com/showthread.php?p=1790046#post1790043]ROM flashing FAQ[/url][/b]
[b][url=http://forum.xda-developers.com/showthread.php?p=1790046#post1790046]Introduction to ROM flashing[/url][/b]
Click to expand...
Click to collapse
ROM flashing FAQ
ROM flashing FAQ:
Q: What is a ROM?
A: A ROM contains the operating system and often additional software which can be “installed” to your mobile device. Most ROM’s provided by the chefs (people who create cutomized ROM’s) just contain the operating system and additional applications. Shipping ROM’s (ROM’s provided by the manufacturer or official providers) also contain a Radio ROM and a bootloader.
Please notice: A ROM can ONLY be flashed to a device it is made for.
Q: What is a bootloader?
A: A bootloader contains information about your device. It is quite similar to a computer’s BIOS. Official bootloader also have a security option called CID (Carrier-ID) which allows you just to install ROM’s from the provider of your phone. So, if you want to flash another ROM, you first have to turn off this security option by “CID-unlocking” your device. Check the flashing instructions below on how to do this.
Q: What is a Radio ROM?
A: The Radio ROM contains the drivers for the communication devices of your phone. Some ROM’s need one or more specific Radio ROM’s to work properly. Usually the chef, who created the ROM recommends a Radio ROM. But don’t mind, if your Radio Rom does not match, you can always flash another without needing to flash the ROM containing the Operating System (OS) again.
You can check the version of your Radio ROM when you click Start > Settings > System > Device Information or booting your device (there will appear three lines of red text. The Radio ROM version is the number after the R:.
You can download Radio ROM's at the xda-developers FTP-Server in the Uploads/Kaiser/Radio-Folder. Username and password are both 'xda'. To install it, download, extract and execute it. Then follow the instructions on your screen. Flashing a Radio does not delete any files on your device's ROM.
To choose the perfect Radio ROM for you check this thread.
Q: What means CID(-unlock)?
A: All known providers add a Carrier ID to their devices. This CID is added to prevent a device being flashed with a ROM which is not from the provider and/or not designed for your device. Be sure to brick your Kaiser, if you try to flash a ROM designed for a Wizard.
To flash other ROM's, you have to unlock the CID. If you flash another ROM on a CID-locked device, the new ROM will not work properly.
Q: What means SIM-Unlock?
A: Lots of providers want to bind their customers. So they add a SIM-Lock to their devices with only allows to use SIM-Cards using their networks. If you want to use a SIM-Card from another provider, you need to SIM-unlock your device. This can be done by contacting the phone's provider (paid & sometimes free), using a service like www.imei-check.com, or using Jockyw2001's Kaiser SIM Unlocker.
Q: Can I brick my phone by flashing a ROM?
A: To be true… YES. But if you follow all instructions, it is quite implausible that your device bricks.
Q: Does flashing affect the warranty of my device?
A: Yes, but, as long as your device can be flashed again, you will find some help at jcespi2005's thread where you can find dumped original ROMs.
Q: What can I do, if i gain problems with the ROM i flashed to my device?
A: First of all you should inform the creator by posting in the ROM's thread if the problem is not described yet. Then you should wait for an update/fix or, if the issue is a showstopper for you, try another ROM.
Q: Which is the best/fastest/... ROM?
A: Nobody can answer you this properly. There are nearly daily new ROM's here and everybody has different demands to a ROM. If you want to know, which fits best for you, read the ROM description and try the ROM('s). Only you can decide, which ROM is the best (for you).
Q: I own an AT&T Tilt. After flashing another ROM, my hardkeyboard does not work properly.
A: AT&T uses another keyboard layout than HTC. To fix this, install the tilt keyboard fix.cab. You can download it at Dutty's Kaiser CAB Collection.
Q: What is the difference between a hardreset and a softreset?
A: A softreset reboots your device. A hardreset sets all settings back to the ROM's defaults. All of your data, settings and additionally installed programs will be deleted.
Q: What are *.CAB-files and/or how do i use them?
A: Cab-files for WINCE-Devices are different to the files you may have seen (e.g. on your Windows Installation CD). They do not only contain files but also installation information similar like a MSI package. To install them, just copy the *.cab to your Mobile Device and run it from there. Most shipped ROMs delete cab-files after executing, most cooked do not. To be sure, check the registry. If HKLM\Software\apps\Microsoft Application Installer\nDynamicDelete = 0 (DWORD decimal), cab-Files will not be deleted after execution.
Q: I have questions which are not described in this FAQ. What shall i do?
A: First of all search the forum and the wiki (http://wiki.xda-developers.com). Maybe the question has been already answered. If you don't find an answer, create a new thread. As i know from experience, the community will always try to help you as soon as possible.
Introduction to ROM flashing
Introduction to ROM flashing
These are the steps on how to flash your device the first time:
1: CID-unlock your device by following the instructions at pof's HTC Kaiser Hard-SPL v1 - CID Unlock & Flash any ROM to your device (4 free)-thread
This needs to be done to flash a ROM to your device which is not created from your provider (or HTC if you own a device with HTC branding).
Additionally you may check persianowns Kaiser HardSPL Walkthrough Video.
If you are running in a white screen running HardSPL, please read this thread.
2: Search this forum for the ROM, you like to flash. Then download and, if needed, extract it.
3. Check, if your Radio-ROM matches the new ROM. If you don't find any information in the ROM's thread don't mind. You can update your Radio ROM later if you gain any problems.
4. Make sure, your devices battery status is NOT LESS than 50%.
5. Connect your device to your computer and wait until activesync/Windows Mobile Device Center recognizes it
6. Last chance to synchronize and/or backup files. All files and databases will be deleted after performing the next step!
(Optional: If you want to save your text messages and/or eMails, use a tool like DotFred's PIM Backup.)
7. Execute the .exe file you downloaded with the ROM.
8. Follow the instructions and DO NOT disconnect your device until flashing is finished.
9. Disconnect your device from your computer.
10. You need to delete the old activesync/Windows Mobile Device Center partnership, because it thinks, your device is not the same as before... and it is right ^^. Deleting an old partnership is only possible, if the device is not connected.
(Optional) If you want to change the name of your device, do that now by clicking Start > Settings > System > About > Device ID. Enter the new name of your device and click on Ok.
11. Connect your device to your computer, create a new partnership and synchronize. Then configure your device to your needs and if needed install additional software.
Congratulations! You succeed flashing your device!
Great FAQ....simple, concise, and informative
Well done
Excellent post bmueller77!
This should clear up a bunch of the questions that are asked.
thanks for that
its hard to find some basic info on here like this, so can we please sticky
Really Good Thank you...
Can you please make a general version of it and put it in general wiki so that it can benefit all not just kaiser guys
Although I am more interested in HTC Elf Touch version []
you could add my video to it http://www.youtube.com/watch?v=UaCt5pUn6iI
shows how to hardspl
verysmartncool said:
Really Good Thank you...
Can you please make a general version of it and put it in general wiki so that it can benefit all not just kaiser guys
Although I am more interested in HTC Elf Touch version []
Click to expand...
Click to collapse
Let's see. I am already working on a more general FAQ version including info on Windows Mobile but, to be honest, a general flashing introduction would be much more complicated and i want to make it as easy as possible for newbies.
I think it would be better, if someone grabs this thing and would edit it for another device to keep it concise. If anyone is interested, just ask me via PM and i'll send you the whole including vbCode.
persiansown said:
you could add my video to it http://www.youtube.com/watch?v=UaCt5pUn6iI
shows how to hardspl
Click to expand...
Click to collapse
Got it. Thank you.
I have made this thread a sticky upon request.
I feel that this info should be ported to the wiki so that it can be found and edited by all.
At the momnet we have FAR to many sticky's in this section which makes finding anything hard to say the least.
Have a look at the BA section (in my signature) to see what I mean.
Aright, will add a general version to the wiki at the weekend.
Thank You but still have a question
Hi, I just got my HTC TyTn 2 as a present from my dad he got it from orange and got it sim unlocked for me. But I don't like it because Orange has their crappy stuff on it I wont the original stuff from HTC on it like HTC Home etc. I've got my phones detail in my signature can some one plz help i jus want to know if i can use it on my rom n radio version. Thanks.
thx
Super! Thank you!
this thread is awesome...it really help a newbie like me
the wiki is also very helpful
keep up the good work
I've been flashing ROMs for a long time. There is one thing I don't know. Does anyone know what is the reason behind stopping flashing RadioROMs at 95%? Whatever RadioROM I want to flash to my Vario III (keeping the standard T-Mobile ROM) it stops. In the RadioROM thread, there were several cases like mine. Can it be that for being able to flash another RadioROM you have to flash a custom ROM like Dutty or Schaps before flashing the Radio? I cannot recall such problems with Hermes.
Thanks for the guide. Also am not new to this I haven't done this in a while. ROM Flash went without a hitch. Keep up the good work.
haamedullah said:
Hi, I just got my HTC TyTn 2 as a present from my dad he got it from orange and got it sim unlocked for me. But I don't like it because Orange has their crappy stuff on it I wont the original stuff from HTC on it like HTC Home etc. I've got my phones detail in my signature can some one plz help i jus want to know if i can use it on my rom n radio version. Thanks.
Click to expand...
Click to collapse
So long as your phone is SIM unlocked as in you can use any sim card in it then you flash it exactly the same as described in this thread. I flashed mine no problems. Does that answer your question or are you just wanting the home screen without flashing? If so Im not sure if thats possible, I heard some people say that you can enable it on orange phones but I flashed mine before I ever tried it.
Excellent FAQ!
Now i can get my hands dirty with that so called "ROM flashing" .
noobie question, but how do i install a cab file? thanks
I'm now very familier with changing my desired ROM for another but when I see the settings for Swapper in the thread I then get a little lost.
How should I setup Swapper? There are loads of settings!
Does the size of the SD card make a difference?
Does the fact I've used the format utility in RAv 1.2.1G recovery ROM make any difference?
Currently I'm testing JACxHEROski v1.7r2 32B.
Thanks for any help!
try posting this in the apps section since it has nothing to do with development you might get more answers there
hey johnny blaze . You live in ep?
Considering the fact that I could copy all files from my phone to my computer, zip it with the correct parameters, cook with the Android Kitchen, and flash, will this work?
There are some phone manufacturers who don't, and will never release updates (minor manufacturers you have never heard of before, believe me).
Looking for the correct custom recovery won't be a problem, since some boards between some devices are similar, or even the same.
Thanks in advance for replies
Moved to Q&A section
Hi,
This is question for Mikel.Canovas and his thread [GPS FIX] GPS Fix for all* roms. For some reason I have not permission to post in his thread.
I apologize for being so naive in this matter, I've read your instructions in the 1st page but I don’t understand clearly how can I install you fix application into my phone.
My phone is a H7300 Hero also known as HD7. I still have the original ROM because I couldn’t find any compatible ROM for my model in CyanogenMod.
Now. When I reboot my phone in recovery mode, these are the options available.
Reboot system now
Apply update from SD card
Wipe data/factory reset
Wipe cache partition
Backup user data
Restore user data
I don’t quite understand which one is for installing your app.
Thanks a lot for all your work and patience.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Hey son2salu go to eten-users.eu you ll find custom roms n stuff
Sent from my HD7 Pro using Tapatalk
So I decided to make a kernel a few week back and it has been going really well. But lately I have had the issue that the default value of scaling_max_freq is a value above stock when the device has booted. This is not great since it can lead to some devices miscalculating and crashing I immediately after booting, but I can't find a way to do it, preferably without modifying the system partition. Any ideas?
opensourcefreak said:
So I decided to make a kernel a few week back and it has been going really well. But lately I have had the issue that the default value of scaling_max_freq is a value above stock when the device has booted. This is not great since it can lead to some devices miscalculating and crashing I immediately after booting, but I can't find a way to do it, preferably without modifying the system partition. Any ideas?
Click to expand...
Click to collapse
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com