My phone is stuck in OnePlus One boot image..... if i try to reflash the system via Fastboot is telling me "Device not Unlocked cannot flash or erase" .... what should i do ???? Please help ...
Try
fastboot devices
And than
fastboot oem unlock
But you need to be in fastboot mode. You will enter it by holding volume up and power button.
Sent from my One using Tapatalk
i allready try several times, but with no results... its just reboot and get stuck in ONE boot image
flo musti said:
i allready try several times, but with no results... its just reboot and get stuck in ONE boot image
Click to expand...
Click to collapse
i'm having same issue
brooklynchildxbc said:
i'm having same issue
Click to expand...
Click to collapse
Fixed now.....
boober78 said:
Try
fastboot devices
And than
fastboot oem unlock
But you need to be in fastboot mode. You will enter it by holding volume up and power button.
Sent from my One using Tapatalk
Click to expand...
Click to collapse
after you get to the fastboot mode, then what do you do ? got the little android head on my screen
suprjeff said:
after you get to the fastboot mode, then what do you do ? got the little android head on my screen
Click to expand...
Click to collapse
Unlock device with "fastboot oem unlock"
Then flash rom
flo musti said:
Fixed now.....
Click to expand...
Click to collapse
how u fix it? my unit hit the same error.
yewfatt said:
how u fix it? my unit hit the same error.
Click to expand...
Click to collapse
If you unlock your bootloader try to lock back (fastboot oem lock) now try to flash via fastboot Philz Recovery ( try until is rebooting himself into recovery) .... After that put on a memory stick the new system .... You may need to mount the USB flash drive ..... That's exactly what I have done....Good Luck ...
Related
Does anyone know the fastboot command to switch the default boot mode back to regular?
slayp00n said:
Does anyone know the fastboot command to switch the default boot mode back to regular?
Click to expand...
Click to collapse
Usually it will boot in fastboot mode if you have a bad flash. What is the message when the phone boots up?
Sent from my XT925 using Tapatalk 2
danifunker said:
Usually it will boot in fastboot mode if you have a bad flash. What is the message when the phone boots up?
Sent from my XT925 using Tapatalk 2
Click to expand...
Click to collapse
stickybit factory_fastboot.
I never had a bad flash. I run cm10.1, but gps was not working someone said flashing stock then reflash cm10.1
So i used that stupid RSD LITE to flahs factory, all i did was fix the xml and erase the recovery flash. It worked fine the phone booted... Then I reflashed cm10.1 which works? Is there an oem command to kill the sticky bit?
I have tha solution!
slayp00n said:
stickybit factory_fastboot.
I never had a bad flash. I run cm10.1, but gps was not working someone said flashing stock then reflash cm10.1
So i used that stupid RSD LITE to flahs factory, all i did was fix the xml and erase the recovery flash. It worked fine the phone booted... Then I reflashed cm10.1 which works? Is there an oem command to kill the sticky bit?
Click to expand...
Click to collapse
excuse me for the next font and style, but I have a lot of time reading post forums and any track that help me to resolve this, and I found!! IN French but, no matter!!
To resolve the message and constantly booting into AP Fastboot, you need (into AP FASTBOOT MODE) put this command in your PC with fastboot
fastboot oem fb_mode_clear
Then press power and voilá... you phone boot normally...
:highfive:
:good::good::good:
alvaro_castro said:
excuse me for the next font and style, but I have a lot of time reading post forums and any track that help me to resolve this, and I found!! IN French but, no matter!!
To resolve the message and constantly booting into AP Fastboot, you need (into AP FASTBOOT MODE) put this command in your PC with fastboot
fastboot oem fb_mode_clear
Then press power and voilá... you phone boot normally...
:highfive:
Click to expand...
Click to collapse
this doesnt fix my issue with boot to bootloader.
atifsh said:
this doesnt fix my issue with boot to bootloader.
Click to expand...
Click to collapse
Well, does your fastboot screen have that message?
If not, what does it say?
killrhythm09 said:
Well, does your fastboot screen have that message?
If not, what does it say?
Click to expand...
Click to collapse
device is locked, status code 0
battery ok
.
.
.
.
,
fastboot reason: flash failure
all i tried was test to boot recovery, not flash,
fastboot boot rec.img
ok so i fastboot flashed stock recovery and it flashed fine and now im no more stuck in bootloader.
and that takes me to my second question/.....
1: can i fastboot flash stock recovery in the first place if im 100% stock, locked and non rooted on the latest kitkat ota
2: can i fastboot flash just the system.img like i flashed recovery and if that is possible hope towelroot will do the work????
i flshed wrong boot.img
:'(
i tryed to slove problem myself
am not professional
help me
waelharrabi said:
i flshed wrong boot.img
:'(
i tryed to slove problem myself
am not professional
help me
Click to expand...
Click to collapse
Well, relocking the device isn't a great thing to do in such a situation. You need to Flash an RUU for your device (find it in the development forum).
you can also try unlocking your phone again if you have the files needed (I don't really know how this procedure works so can't help here), or getting S-OFF, which I don't recommend for you.
if you have the unlock code.bin just use it with the fastboot command to unlock the bootloader again
fastboot flash unlocktoken Unlock_code.bin
after that choose reboot from bootloader and see if it boots
if fails then flash again the rom from recovery
by the way what boot.img did you use?
rzr86 said:
if you have the unlock code.bin just use it with the fastboot command to unlock the bootloader again
fastboot flash unlocktoken Unlock_code.bin
after that choose reboot from bootloader and see if it boots
if fails then flash again the rom from recovery
by the way what boot.img did you use?
Click to expand...
Click to collapse
.
I gave the phone to a service center. ..they said that they can do nothing...phone does not boot to recovery...just can boot to fastboot...
:'(((
waelharrabi said:
.
I gave the phone to a service center. ..they said that they can do nothing...phone does not boot to recovery...just can boot to fastboot...
:'(((
Click to expand...
Click to collapse
ddi you try also a ruu.exe before sending it to the service?
rzr86 said:
ddi you try also a ruu.exe before sending it to the service?
Click to expand...
Click to collapse
I tried it shows me error
waelharrabi said:
I tried it shows me error
Click to expand...
Click to collapse
what error exactly?
no access to recovery
I've got big problem. My One Mini is fine until I try to go into recovery. It refuses to go there.
I get fastboot and bootloader menus fine. It enters bootloader, but if I try to go into recovery, it just goes back to the main bootloader menu.
The problem started when I flashed CWMRecovery. Fastboot and adb recognise my phone, and accept commands, but when I try to fastboot flash recovery in it sends an error message. File not found.
I tried " fastboot boot recovery.img" but that just froze the machine .
When I try to get into recovery from rom manager or ROM toolbox pro, it takes me to the fastboot menu, not into recovery, and we're back to square one, as above.
Running android 4.3 Sense 5.5 software 2.12.401.1 Supercid 11111111
rooted and unlocked
To get the phone to work again, I have to hold power down for about 10 secs direct from fastboot/bootloader...may have to do this several times before it boots into Android.
If I turn power off from bootloader, it returns to bootloader when I power up again.
If I don't turn the phone off, once in main application, it's all OK.
Ho hum.
As I say , it works like a dream until I want to go into recovery.
Any ideas, please?
Thanks
Hi
Boblud said:
I tried " fastboot boot recovery.img" but that just froze the machine .
Click to expand...
Click to collapse
The correct command to flash the recovery is
Code:
fastboot flash recovery your_recovery_image.img
see also: wiki.cyanogenmod.org/w/Doc:_fastboot_intro
Booting into recovery should be possible with
Code:
adb reboot recovery
I didnt tried CWM on the Mini, but used it on my old Marvel. I'm satisfied with TWRP for the Mini.
greetings
Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.
Boblud said:
Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.
Click to expand...
Click to collapse
lock the bootloader RUU back to stock and start over ?
clsA said:
lock the bootloader RUU back to stock and start over ?
Click to expand...
Click to collapse
Thanks, will do when I can find ruu to download! Any pointers, please?
Uhm.... have u read Frequently Asked Questions by @KidCarter93 ?
KidCarter93 said:
[SIZE=+1]Q11: I have a custom recovery installed but I can't boot into it.[/SIZE]
Use the command - fastboot erase cache.
You should now be able to boot into recovery.
Click to expand...
Click to collapse
Maybe it helps.
Boblud said:
Thanks, will do when I can find ruu to download! Any pointers, please?
Click to expand...
Click to collapse
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe
clsA said:
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe
Click to expand...
Click to collapse
Thanks for help all round.
The RUU wouldn't run: it reported an unknown error, but having done so, it must have done something, as when I rebooted, I had access to recovery once again...briefly! Then it went again.
Anyway, I re locked / unlocked , locked a few times, and hey presto, it's sprung back into life!
I was trying to get the latest twrp '2.8.7.2'. I downloaded it and flashed the img to recovery and nothing seemed to happen so I tried flashing it to boot then I tried to reboot the system. Now when I try to turn it on I get stuck on the Google like it is turning but it just gets stuck. I tried Charging it now when I charge it I get stuck on the battery logo. When I try booting it Booting it into recovery(twrp) I get a black screen. I can tell the Screen is on because of the dim glow it gives off but it is not doing anything. Note: I am some what of a noob when it comes to this stuff, My nexus 5 was running Marshmallow, and I was running the Xtra smooth rom (it is very close to stock). Plz help. I have also just found out that the reason im getting the bootloop is I flashed the wrong version of TWRP need a fix PLZ HELP.
Did you try flashing stock recovery or twrp 2.8.7.1?
audit13 said:
Did you try flashing stock recovery or twrp 2.8.7.1?
Click to expand...
Click to collapse
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Judah04 said:
I cant flash anything because it is stuck. If you can tell me how to do that it would be great. also I gave you the thanks thing.
Click to expand...
Click to collapse
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
When i boot into recovery mode the screen is on but it is black.
asawoszc said:
All you have to do is boot into your bootloader (Power + Volume Up + Volume Down at the same time) and flash the stock recovery.
fastboot flash recovery recovery.img
Chances are you flashed an incorrect version of TWRP meant for another phone hence the boot loop.
Click to expand...
Click to collapse
Also yes i do think I flashed the wrong TWRP. how do I flash the correct TWRP when I can't even get back into a tool to flash it?
Judah04 said:
When i boot into recovery mode the screen is on but it is black.
Click to expand...
Click to collapse
You dont need recovery, you need bootloader.
telep said:
You dont need recovery, you need bootloader.
Click to expand...
Click to collapse
Can you please explain to me exactly what to do. thank you. also my bootloader is unlocked. I also can get to fastboot so what is the diffrence between bootloader and fastboot.
Hold down the volume +, volume -, and power button. You'll be taken to a screen with the word START at the top. Now, connect the phone to your Windows computer using the USB cable, open a command prompt and type "fastboot flash recovery nameof twrpfile.img", press the enter key, use the volume button to select recovery, use the power button to enter recovery, press the power button, press volume + button, and you should enter TWRP.
Thank you but I do not own a windows computer
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
wangdaning said:
Then look up the respective commands. You flashed twrp over your kernel, you need to flash a proper boot.img (kernel) if you want the phone to boot. Fastboot is ran through bootloader. Flash the proper kernel in bootloader using fastboot.
Click to expand...
Click to collapse
Thank you this sounds like it will work. But can you put it in more simple terms and give me links? plz. thx in advance.
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
audit13 said:
Do you have a computer?
Click to expand...
Click to collapse
I have a macbok air running mac os x 10.5.8.
audit13 said:
Do you have access to a Windows computer to flash the commands? How did you flash TWRP?
Click to expand...
Click to collapse
I flashed TWRP using the TWRP app it installed TWRP 2.8.7.1 I also unlocked the bootloader with a similar app.
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
Just cheked it out I tried it and it didn't work but thx anyway. btw I am running android 6.0.
audit13 said:
This might help: http://forum.xda-developers.com/goo...olkit-root-twrp-recovery-unroot-11-6-t2515640
Click to expand...
Click to collapse
It might not have been working because I did not enable USB Debuging. :crying:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
audit13 said:
USB debugging is required for adb commands. With fastboot mode, debugging isn't necessary.
Click to expand...
Click to collapse
Can you please walk me through this i am some what of a beginner when it comes to some of these things. I can try the tool kits agin but need help.
Hello, my OnePlus is stuck in fastboot mode. When you try to restart in the recovery menu or turn it off, it still returns to fastboot
yumabs said:
Hello, my OnePlus is stuck in fastboot mode. When you try to restart in the recovery menu or turn it off, it still returns to fastboot
Click to expand...
Click to collapse
If you could explain what happened that lead to this maybe you could get a little proper help.
mattie_49 said:
If you could explain what happened that lead to this maybe you could get a little proper help.
Click to expand...
Click to collapse
I was trying to install a custom recovery.