Database Info

is my Disre S dead ?

1 Year ago I unlocked ma Deisre S and install a customer ROM
Today I wanted to try the new Cynemod out
so I just make everything like usual:
setx path /m "%PATH%;C:\Android\"
fastboot flash recovery recovery.img
wipe Desire / ...
Install rom from SD
than i wanted to reboot my phone into fastboot
and
fastboot flash boot boot.img
But it just show HTC
That the screen is on it is bright black
and nothing happen,
can i fix it ?

so many spelling errors?
you didn't use fastboot erase boot before fastboot boot boot. img?
Sent from my supercharged tank

hisname said:
so many spelling errors?
you didn't use fastboot erase boot before fastboot boot boot. img?
Sent from my supercharged tank
Click to expand...
Click to collapse
I'm sorry for the mistakes, english is not my native language.
No, I havt
In the first of Rome I did exactly the same, and it has always worked.

non-sony panel issue maybe?

ContactFront said:
non-sony panel issue maybe?
Click to expand...
Click to collapse
???

Which CyanogenMod did you flash?
say, CM10 by nk111, if your phone doesn't have sony panel. it's gonna get stuck

this one:
http://download.cyanogenmod.org/?type=stable&device=saga
cm-7.2.0-saga.zip

deltateam said:
this one:
http://download.cyanogenmod.org/?type=stable&device=saga
cm-7.2.0-saga.zip
Click to expand...
Click to collapse
ok, then that's probably something else, not panel issue

if the Phone has problem while booting, can i do somthing ?? or, not ?

wait, you said
"i wanted to reboot my phone into fastboot"
do you mean, you weren't able to go into fastboot after flashing the ROM? or you actually have done it and flash boot.img the phone couldn't boot afterwards?

do you mean, you weren't able to go into fastboot after flashing the ROM? or you actually have done it and flash boot.img the phone couldn't boot afterwards?
no i wasnt,..
i flashed the rom
than i wanted to reboot the phone and gointo flashboot and
fastboot flash boot boot.img
Click to expand...
Click to collapse
but after rebooting and it show me black screen

deltateam said:
do you mean, you weren't able to go into fastboot after flashing the ROM? or you actually have done it and flash boot.img the phone couldn't boot afterwards?
no i wasnt,..
i flashed the rom
than i wanted to reboot the phone and gointo flashboot and
but after rebooting and it show me black screen
Click to expand...
Click to collapse
connect phone to your pc, try "adb reboot bootloader"

@ContactFront you are graet!!!
thks it work thks !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
and cynomod work too!!!!
htks

deltateam said:
@ContactFront you are graet!!!
thks it work thks !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
and cynomod work too!!!!
htks
Click to expand...
Click to collapse
no problem glad it worked now enjoy your new rom:laugh:

ContactFront said:
no problem glad it worked now enjoy your new rom:laugh:
Click to expand...
Click to collapse
thks :good::good:

Xoom 4g Stuck at Red M

My Xoom is a 3g that I sent in to have the 4g upgrade. Ive been running different roms for a couple years, decided to go back to stock the other day. I followed some steps I found at xda about how to do that, It was some version of honeycomb.
Anyways, after a reboot of the xoom It is stuck at the red M. I cannot get into recovery, cannon use adb commands. However, fastboot is working. What can I try next? After spending hours googling it, this doesnt seem real uncommon. But most of the links on how to put on a new bootloader with something called avalance 1.35 seem to be broke. Any ideas?

Your Xoom does not have an OS installed, nor a recovery.
Need to fastboot the stock images.

Mjamocha said:
Your Xoom does not have an OS installed. Flash a custom ROM
Click to expand...
Click to collapse
Correct. However, I cannot get into recovery to flash a rom. I have tried pushing the Motorola default through fastboot. It says it takes it but doesnt do anything.

ArXane said:
Correct. However, I cannot get into recovery to flash a rom. I have tried pushing the Motorola default through fastboot. It says it takes it but doesnt do anything.
Click to expand...
Click to collapse
yeah, i corrected my last comment.
hmmm .... odd

Mjamocha said:
yeah, i corrected my last comment.
hmmm .... odd
Click to expand...
Click to collapse
I have done the following:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
I got the files from the Motorola Support site.
I also used the RSD Lite to try and push factory image.

ArXane said:
I have done the following:
Click to expand...
Click to collapse
you forgot the last command
fastboot oem lock

Mjamocha said:
you forgot the last command
fastboot oem lock
Click to expand...
Click to collapse
Sorry, I have done that one also.

are you using the correct stock images for the 4G version?

Mjamocha said:
are you using the correct stock images for the 4G version?
Click to expand...
Click to collapse
Here are the links I have tried:
http://www.randomphantasmagoria.com/firmware/xoom/trygon4g/
HLK75D
I also tried the motorola image: MZ602_HLK75D that I had to request from Motorola.

It seems that what you have tried is the correct process. I too have the 4G Xoom (USA) and have used that process myself many times. However I used the "MZ600_HRI66" images, to return to stock with no problems. I may suggest to repeat the return to stock process using the HRI66 images.

Mjamocha said:
It seems that what you have tried is the correct process. I too have the 4G Xoom (USA) and have used that process myself many times. However I used the "MZ600_HRI66" images, to return to stock with no problems. I may suggest to repeat the return to stock process using the HRI66 images.
Click to expand...
Click to collapse
WIll try, thank you. Ever heard of everest 1.5 bootloader? It looks like that may be a common fix. All the links I find are broken.

Nope.... flashing HRI66 didnt change anything. Still cannot ADB, still doesnt boot.

no never heard of it. are you on everest?
adb wont work unless usb debugging is enabled, and you can't get into
USB debugging because you can't get into the system.
try this to place a recovery;
fastboot oem unlock
fastboot reboot
Get back into fastboot then grab a recovery image;
fastboot flash recovery (your recovery.img here)
if all else fails - go here - http://forum.xda-developers.com/showthread.php?t=1468298

Mjamocha said:
no never heard of it. are you on everest?
adb wont work unless usb debugging is enabled, and you can't get into
USB debugging because you can't get into the system.
try this to place a recovery;
fastboot oem unlock
fastboot reboot
Get back into fastboot then grab a recovery image;
fastboot flash recovery (your recovery.img here)
if all else fails - go here - http://forum.xda-developers.com/showthread.php?t=1468298
Click to expand...
Click to collapse
Tried flashing recovery with the stpes agove, same deal, cannot get into recovery. WIll try the LORD tool and will let you know.

[Q] Nexus S stucked on Edge?!?

Few days ago,my alarm was ringing and i pressed volume down to shut it down,and mobile just restared ,and get to the nexus logo,and was just restarting all over again restart->nexus logo->restart...i tried everything charging it,discharging it...no matter i do it wont stop restarting,so i put official rom from google page installing everything and now everything is working except my 3g signal.My phone is alwasy on edge,2 days ago,i received a signal(3g) for 30 seconds,then back to Edge...what should i do?Change rom?Can i do something before changing roms,because i got my apps all installed?Thank you in advance!

mimi12 said:
Few days ago,my alarm was ringing and i pressed volume down to shut it down,and mobile just restared ,and get to the nexus logo,and was just restarting all over again restart->nexus logo->restart...i tried everything charging it,discharging it...no matter i do it wont stop restarting,so i put official rom from google page installing everything and now everything is working except my 3g signal.My phone is alwasy on edge,2 days ago,i received a signal(3g) for 30 seconds,then back to Edge...what should i do?Change rom?Can i do something before changing roms,because i got my apps all installed?Thank you in advance!
Click to expand...
Click to collapse
You could try checking whether the "Use 2G networks only" is on. If it is turn it on and you'll probably get connected to 3G. If it isn't then I'm not sure what the problem might be. You could try googling it.

kkricardokaka95 said:
You could try checking whether the "Use 2G networks only" is on. If it is turn it on and you'll probably get connected to 3G. If it isn't then I'm not sure what the problem might be. You could try googling it.
Click to expand...
Click to collapse
2G isn't on...some other problem must be...i am gonna try to flash new rom,but i want to be sure is there anything i can do about it before...

Still nothing,flashed rom to CM 10.1.2 and still no 3g...what could be the problem?
Please help!
Ty

I tried to put another provider(tmobile/vodafone) and still the same thing...still nexus is on Edge...somewhere into mobile settings 3g is blocked? But where?!?!?
Please help i am getting desperate!
Sent from my Nexus S using Tapatalk 2

mimi12 said:
I tried to put another provider(tmobile/vodafone) and still the same thing...still nexus is on Edge...somewhere into mobile settings 3g is blocked? But where?!?!?
Please help i am getting desperate!
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
I have never used 3G on my Nexus S so can't really provide much help. You could try the HSPA/HSDPA tweak which is located somewhere on our beloved forum(can't provide the link sorry I'm in bit of a rush. Will provide it later if I find the time)

http://forum.xda-developers.com/showthread.php?t=1116884&highlight=hspa
There. Try this.
Disclaimer: I DID NOT read it. Use those tweaks at your own discretion. If your phone does not boot do not shoot me.

kkricardokaka95 said:
I have never used 3G on my Nexus S so can't really provide much help. You could try the HSPA/HSDPA tweak which is located somewhere on our beloved forum(can't provide the link sorry I'm in bit of a rush. Will provide it later if I find the time)
Click to expand...
Click to collapse
Hello,tnx for help,i tried everything...i changed roms more than socks in my life...then i downloaded ICS,flashed it,and installed application build.prop(for HSPA/HSDPA tweak,because i couldnt connect it trough cmd),then i changed the parameters,reboot it few times,and still nothig,then i managed to download Official Google Image(from google site), Android 4.1.2 (JZO54K),flashed it and now it works like a charm...:victory:
I guess it was a problem in first rome i flashed,maybe he left some setting behing,and that was dragging along all the way...and i think i erased it somewhere within(erase boot,cache,recovery,system)...
P.S.
Need to notice that i didnt flashed Android 4.1.2 (JZO54K) trough mobile,recovery,mounted storage...etc,etc.(like i used too...)
I did it all trough cmd...
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Note: Do not close the CMD window.
Flash the bootloader Type:
fastboot flash bootloader bootloader-crespo-i9020xxlc2.img
Reboot bootloader mode (This is necessary):
fastboot reboot-bootloader
Flash the Radio (baseband) . Type:
fastboot flash radio radio-crespo-i9020xxki1.img
Reboot bootloader mode again. Type:
fastboot reboot-bootloader
Flash the ROM image:
fastboot -w update image-soju-jzo54k.zip

mimi12 said:
Hello,tnx for help,i tried everything...i changed roms more than socks in my life...then i downloaded ICS,flashed it,and installed application build.prop(for HSPA/HSDPA tweak,because i couldnt connect it trough cmd),then i changed the parameters,reboot it few times,and still nothig,then i managed to download Official Google Image(from google site), Android 4.1.2 (JZO54K),flashed it and now it works like a charm...:victory:
I guess it was a problem in first rome i flashed,maybe he left some setting behing,and that was dragging along all the way...and i think i erased it somewhere within(erase boot,cache,recovery,system)...
P.S.
Need to notice that i didnt flashed Android 4.1.2 (JZO54K) trough mobile,recovery,mounted storage...etc,etc.(like i used too...)
I did it all trough cmd...
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Note: Do not close the CMD window.
Flash the bootloader Type:
fastboot flash bootloader bootloader-crespo-i9020xxlc2.img
Reboot bootloader mode (This is necessary):
fastboot reboot-bootloader
Flash the Radio (baseband) . Type:
fastboot flash radio radio-crespo-i9020xxki1.img
Reboot bootloader mode again. Type:
fastboot reboot-bootloader
Flash the ROM image:
fastboot -w update image-soju-jzo54k.zip
Click to expand...
Click to collapse
So if you're hell bent on using a custom ROM now flash Cyanogenmod or whatever you want, but just wipe data. Don't format everything.

mimi12 said:
Hello,tnx for help,i tried everything...i changed roms more than socks in my life...then i downloaded ICS,flashed it,and installed application build.prop(for HSPA/HSDPA tweak,because i couldnt connect it trough cmd),then i changed the parameters,reboot it few times,and still nothig,then i managed to download Official Google Image(from google site), Android 4.1.2 (JZO54K),flashed it and now it works like a charm...:victory:
I guess it was a problem in first rome i flashed,maybe he left some setting behing,and that was dragging along all the way...and i think i erased it somewhere within(erase boot,cache,recovery,system)...
P.S.
Need to notice that i didnt flashed Android 4.1.2 (JZO54K) trough mobile,recovery,mounted storage...etc,etc.(like i used too...)
I did it all trough cmd...
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
Note: Do not close the CMD window.
Flash the bootloader Type:
fastboot flash bootloader bootloader-crespo-i9020xxlc2.img
Reboot bootloader mode (This is necessary):
fastboot reboot-bootloader
Flash the Radio (baseband) . Type:
fastboot flash radio radio-crespo-i9020xxki1.img
Reboot bootloader mode again. Type:
fastboot reboot-bootloader
Flash the ROM image:
fastboot -w update image-soju-jzo54k.zip
Click to expand...
Click to collapse
Thank you for your detailed help,i had the same problem and i resoleved like you did...Thank you!!!

[Q] Where has recovery gone?

no access to recovery
I've got big problem. My One Mini is fine until I try to go into recovery. It refuses to go there.
I get fastboot and bootloader menus fine. It enters bootloader, but if I try to go into recovery, it just goes back to the main bootloader menu.
The problem started when I flashed CWMRecovery. Fastboot and adb recognise my phone, and accept commands, but when I try to fastboot flash recovery in it sends an error message. File not found.
I tried " fastboot boot recovery.img" but that just froze the machine .
When I try to get into recovery from rom manager or ROM toolbox pro, it takes me to the fastboot menu, not into recovery, and we're back to square one, as above.
Running android 4.3 Sense 5.5 software 2.12.401.1 Supercid 11111111
rooted and unlocked
To get the phone to work again, I have to hold power down for about 10 secs direct from fastboot/bootloader...may have to do this several times before it boots into Android.
If I turn power off from bootloader, it returns to bootloader when I power up again.
If I don't turn the phone off, once in main application, it's all OK.
Ho hum.
As I say , it works like a dream until I want to go into recovery.
Any ideas, please?
Thanks

Hi
Boblud said:
I tried " fastboot boot recovery.img" but that just froze the machine .
Click to expand...
Click to collapse
The correct command to flash the recovery is
Code:
fastboot flash recovery your_recovery_image.img
see also: wiki.cyanogenmod.org/w/Doc:_fastboot_intro
Booting into recovery should be possible with
Code:
adb reboot recovery
I didnt tried CWM on the Mini, but used it on my old Marvel. I'm satisfied with TWRP for the Mini.
greetings

Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.

Boblud said:
Yes, thanks. I know the commands should work...but that's the trouble..they don't!
I can get into the recovery menu...HBOOT /FASTBOOT / RECOVERY and so on, but selecting "RECOVERY" simply sends me back to HBOOT menu.
I can't flash anything under FASTBOOT, either. I've been doing this sort of thing for several years without trouble....until now!
So come on chaps..thinking caps on , please.
Click to expand...
Click to collapse
lock the bootloader RUU back to stock and start over ?

clsA said:
lock the bootloader RUU back to stock and start over ?
Click to expand...
Click to collapse
Thanks, will do when I can find ruu to download! Any pointers, please?

Uhm.... have u read Frequently Asked Questions by @KidCarter93 ?
KidCarter93 said:
[SIZE=+1]Q11: I have a custom recovery installed but I can't boot into it.[/SIZE]
Use the command - fastboot erase cache.
You should now be able to boot into recovery.​
Click to expand...
Click to collapse
Maybe it helps.

Boblud said:
Thanks, will do when I can find ruu to download! Any pointers, please?
Click to expand...
Click to collapse
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe

clsA said:
here's the RUU
http://www.androidruu.com/getdownlo...14_10.20.40.4408L_release_333483_signed_2.exe
Click to expand...
Click to collapse
Thanks for help all round.
The RUU wouldn't run: it reported an unknown error, but having done so, it must have done something, as when I rebooted, I had access to recovery once again...briefly! Then it went again.
Anyway, I re locked / unlocked , locked a few times, and hey presto, it's sprung back into life!

Moto G3 boots into recovery every time I power on device

I have unlocked my bootloader. Every time I power on my Motorola Moto G3, it boots into the recovery screen. It isn't really a problem, it's more of an annoyance. I have to use the power / volume buttons to choose start and then it boots into the OS fine.
Any help would be greatly appreciated, thanks.

ItsWoffles said:
I have unlocked my bootloader. Every time I power on my Motorola Moto G3, it boots into the recovery screen. It isn't really a problem, it's more of an annoyance. I have to use the power / volume buttons to choose start and then it boots into the OS fine.
Any help would be greatly appreciated, thanks.
Click to expand...
Click to collapse
Look at this thread
https://forum.xda-developers.com/2015-moto-g/help/reboot-bootloader-mode-t3653547

melp57 said:
Look at this thread
https://forum.xda-developers.com/2015-moto-g/help/reboot-bootloader-mode-t3653547
Click to expand...
Click to collapse
Do I need to type in fastboot oem fb_mode_clear while re flashing stock firmware again like I would to relock the bootloader?

ItsWoffles said:
Do I need to type in fastboot oem fb_mode_clear while re flashing stock firmware again like I would to relock the bootloader?
Click to expand...
Click to collapse
Actually it's not an issue, the command
Code:
fastboot oem fb_mode_set
makes the phone boot into bootloader mode instead of starting android. To undo this, you'll just have to type in-
Code:
fastboot oem fb_mode_clear
. No need to flash the whole firmware again if this is the only problem.
Broadcasted from Zeta Reticuli

Gravemind2015 said:
Actually it's not an issue, the command
Code:
fastboot oem fb_mode_set
makes the phone boot into bootloader mode instead of starting android. To undo this, you'll just have to type in-
Code:
fastboot oem fb_mode_clear
. No need to flash the whole firmware again if this is the only problem.
Broadcasted from Zeta Reticuli
Click to expand...
Click to collapse
Where do I type this command in? Using ABD and fastboot? Do I just go into the bootloader and plug my phone into my PC, then open up ABD and fastboot and type in that command or what do I do? Is that the only command I need to type in? Sorry, I'm a noob to this kinda stuff!

ItsWoffles said:
Where do I type this command in? Using ABD and fastboot? Do I just go into the bootloader and plug my phone into my PC, then open up ABD and fastboot and type in that command or what do I do? Is that the only command I need to type in? Sorry, I'm a noob to this kinda stuff!
Click to expand...
Click to collapse
Reboot the phone into bootloader mode. To do this, power off the phone, press and hold power+volume down button till it shows up.
Plug the phone into PC, open command prompt from the folder where adb.exe and fastboot.exe are present, and type that command (only that one is needed). Disconnect the phone and try rebooting to see if it boots correctly.
Broadcasted from Zeta Reticuli

ItsWoffles said:
I have unlocked my bootloader. Every time I power on my Motorola Moto G3, it boots into the recovery screen. It isn't really a problem, it's more of an annoyance. I have to use the power / volume buttons to choose start and then it boots into the OS fine.
Any help would be greatly appreciated, thanks.
Click to expand...
Click to collapse
I think u flashed recovery to boot..

mg_jishad said:
I think u flashed recovery to boot..
Click to expand...
Click to collapse
If that was the case, you could never boot the phone into Android... the OP stated that he can select continue and start the device normally. It is most likely stuck in fastboot fb_mode like @Gravemind2015 stated.

Excuse any possible miss posting of My question.
Moto G 3 factory rom and rooted
Problem: Motorola security update action causes Moto to keep booting into twrp recovery loop.
Have tried to break the looping, but there is something I am missing or not doing correctly any help thanks.....

Uncle Waldo said:
Excuse any possible miss posting of My question.
Moto G 3 factory rom and rooted
Problem: Motorola security update action causes Moto to keep booting into twrp recovery loop.
Have tried to break the looping, but there is something I am missing or not doing correctly any help thanks.....
Click to expand...
Click to collapse
Now this sounds like you flashed TWRP in your boot image... Reflash the stock boot image with fastboot

acejavelin said:
Now this sounds like you flashed TWRP in your boot image... Reflash the stock boot image with fastboot
Click to expand...
Click to collapse
Shouldn't that make the phone stay at bootlogo as the kernel and ramdisk are overwritten by TWRP code? @Uncle Waldo stated that the phone is looping into TWRP after *moto update action*. So what I am able to figure out is that this is a OTA-on-stock-rom-with-custom-recovery situation. I am a litte doubtful though as google says the phone boots into kernel from recovery (which is evident here) instead of kernel from boot partiton (source), so you may be 100% correct here too
@Uncle Waldo : If that is indeed the case (i.e moto issued an update and since rebooting the phone it's just looping into TWRP and giving an error) then I'd recommend that-
Flash stock boot.img as @acejavelin suggested
Flash stock recovery.img (as TWRP can't nstall stock ROM updates)
This is assuming that the /system partition was never modified in any way. If the update still fails in stock revovery, I'd guess that the whole system has to be restored to a non-modified state (i.e flashing the full firmware). You can try flashing all without doing the 'fastboot erase' part though, but i'd recommend you to backup your files using TWRP when you can.
links-
Link to the flashing guide is here
Link to the firmware index is here
command to install recovery -
Code:
fastboot flash recovery recovery.img
command to flash boot.img-
Code:
fastboot flash boot boot.img

Uncle Waldo said:
Excuse any possible miss posting of My question.
Moto G 3 factory rom and rooted
Problem: Motorola security update action causes Moto to keep booting into twrp recovery loop.
Have tried to break the looping, but there is something I am missing or not doing correctly any help thanks.....
Click to expand...
Click to collapse
If it is because of an update, you can't accept it while on TWRP... If you did, try to access the TWRP menu and if you can't boot TWRP from.fadtboot (not flash) and wipe caches... It should boot normally after that.

ACE; moto has been operating for sometime now fine
acejavelin said:
Now this sounds like you flashed TWRP in your boot image... Reflash the stock boot image with fastboot
Click to expand...
Click to collapse
You believe this could be my problem as the moto boots just fine and it's only started this problem when I installed the following update.
Motorola > android security updates version 24.211.14.en.US
After this install and reboot it appears to work just fine and then shortly reboots into TWRP from here the only correcting action that stops the reboot loop is "RESTORE".
After restoring and reboot the moto is back to operating as before and at some point I get the same message to install the security updates and the dance begins anew.
If reflashing the stock boot image via fastboot could correct my problem > then I am all ears Ace, as it's been sometime since I ventured into android ville and any help in this matter thanks...

Uncle Waldo said:
You believe this could be my problem as the moto boots just fine and it's only started this problem when I installed the following update.
Motorola > android security updates version 24.211.14.en.US
After this install and reboot it appears to work just fine and then shortly reboots into TWRP from here the only correcting action that stops the reboot loop is "RESTORE".
After restoring and reboot the moto is back to operating as before and at some point I get the same message to install the security updates and the dance begins anew.
If reflashing the stock boot image via fastboot could correct my problem > then I am all ears Ace, as it's been sometime since I ventured into android ville and any help in this matter thanks...
Click to expand...
Click to collapse
You edited the original question after I replied... Read my follow-up answer. You can't take an OTA with TWRP installed, just start TWRP and wipe caches and then don't accept any further OTA.

Ace; I missed that one
acejavelin said:
You edited the original question after I replied... Read my follow-up answer. You can't take an OTA with TWRP installed, just start TWRP and wipe caches and then don't accept any further OTA.
Click to expand...
Click to collapse
Your correct I missed that one, a BC moment (before coffee) sorry.
Okay in the fog of my memory I do now remember the OTA prohibition as I said it's been a piece of time.
I've done as instructed and all is well again, but will this nag screen appear again as it has done.
Question > How do I shut the motorolia OTA update off, so I don't get their stupid never ending nag screen everytime that I look at phone?
Thanks for your help...
---------- Post added at 05:13 PM ---------- Previous post was at 04:33 PM ----------
Ace I figured it out thanks for all your help...