Database Info

Stuck at Motorola Dual-Core? [Wifi-Only]

Hiya,
After dealing with a half-bricked Xoom, I did some research on this problem and found a solution.
If in any case, you happen to get stuck on the "Motorola Dual-Core Technology"
Solution to this (For the MZ604, One-Click rooted):
MZ604 Stock .imgs Download: http://developer.motorola.com/products/software/
*Make sure you have fastboot in the same directory as your adb for easy access*
1. Plug in your USB cord
2. Turn off your Xoom (Vol-Up + Power)
3. Boot into fastboot (Vol-Down + Power)
4. On your computer, open up a command prompt, and type the following:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
-or-
Code:
fastboot flash boot <path to boot.img>
fastboot flash system <path to system.img>
fastboot flash recovery <path torecovery.img>
fastboot flash userdata <path userdata.img>
fastboot erase cache
fastboot oem lock
5. Reboot the Xoom
Code:
fastboot reboot
6. There you go, back to stock!

On the real though, if you can get to Fastboot (or even the Moto "Android Recovery" state), you're not THAT bricked you've got to relock and go back to out-of-box; just keep a known-good boot.img around somewhere.

You just saved my life!

Thanks for sharing OP.
I take it this method is the same for 3.1?

I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Lcsglvr said:
I tried reverting back to stock using the "one click" root/unroot tool that was the first to come out for the Xoom.
Anyway, I tried the unroot process and everything was going fine, until something occurred. Now, it tries to boot up and says at the Moto Dual Core Technology screen, "Failed to boot LNX 0x0004 // Starting RSD mode 2".
Can someone help
Click to expand...
Click to collapse
Can anyone help!

Lcsglvr said:
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Can anyone help!
Click to expand...
Click to collapse
same here, anyone help ((

Lcsglvr said:
I hope this works. Although, I can't turn my xoom off. It also appears that my computer will not recognize my device when it is plugged in. In addition, I can't turn off my Xoom? It just reboots... so I can't enter fastboot mode.
I just posted this in a new thread.
Can anyone help!
Click to expand...
Click to collapse
You can still enter fastboot if you xoom won't shut off. Just hold the appropria oncete buttons as it reboot. Happened to me last night upgrading to 3.1. It. Wouldn't shut down at all. Once I got into fastboot my computer saw it and I was able to fix

Honestly, I almost went through all of this last night when my WIFI Xoom got stuck in a boot loop.
However, I noticed that when my recovery went to flash the new 3.1 file, I felt like it didn't take as long as it should have. The file was the right size and all and it even said that everything installed successfully, but it just kept boot looping regardless of trying over and over. So I went ahead and re-downloaded the 3.1 file and repeated the steps to flash it and everything worked.
So, before you spend a whole lot of time restoring your Xoom, simply re-download the files and try it one more time. It worked for me.

rebill said:
You can still enter fastboot if you xoom won't shut off. Just hold the appropria oncete buttons as it reboot. Happened to me last night upgrading to 3.1. It. Wouldn't shut down at all. Once I got into fastboot my computer saw it and I was able to fix
Click to expand...
Click to collapse
Thanks! Finally have some hope to recovering. I'll post steps I took later once I get this damn thing fixed.

hmmm... I'm in fastboot supposedly and tried to flash boot.img but it seems to be stuck at <waiting for device>
This happen to anyone else?
After search seems like a driver issue, but I have installed the drivers... I was previous rooted, so I know I have the drivers. Just to be sure, I ran the MotoHelper again. I don't understand. It's just seeing my device on the "Starting Fastboot protocol support."
help?

Lcsglvr said:
hmmm... I'm in fastboot supposedly and tried to flash boot.img but it seems to be stuck at <waiting for device>
This happen to anyone else?
After search seems like a driver issue, but I have installed the drivers... I was previous rooted, so I know I have the drivers. Just to be sure, I ran the MotoHelper again. I don't understand. It's just seeing my device on the "Starting Fastboot protocol support."
help?
Click to expand...
Click to collapse
Yes. How did I fix it? I returned the xoom and had a new one two days later.
If the screen says something like "Entering RSD 2" then you're boned. The xoom won't be recognized in either the current state or in fastboot state by the computer, so no amount of commands will help. Even having the stock images doesn't help with that. Even RSDLite can't see the xoom in that state.
There have been several reports of people just being honest to Motorola and them fixing the device under the warranty.

Hmm honesty. I'll give it a shot.
Sent from my ADR6300 using XDA App

Is the final OEM lock necessary? It's quite a pain as your userdata gets wiped if you unlock it...

I was stuck on bootloop, with unrecognised device, through adb was able to get back into clockwork recovery somehow at first boot, think twice down volume? Could be wrong.
I was able tto rreflash zip 3.1 over thet top again.
sry if this is different and unhelpful, bu imagine things are pretty desperate if you are considering returning the device

zerin said:
Yes. How did I fix it? I returned the xoom and had a new one two days later.
If the screen says something like "Entering RSD 2" then you're boned. The xoom won't be recognized in either the current state or in fastboot state by the computer, so no amount of commands will help. Even having the stock images doesn't help with that. Even RSDLite can't see the xoom in that state.
There have been several reports of people just being honest to Motorola and them fixing the device under the warranty.
Click to expand...
Click to collapse
You're not boned at all. I had that happen to me so I just got back into fastboot, downloaded the files in the OP put ADB, Fastboot and the adb extensions into the file I downloaded then ran the commands and got me XOOM back up and running fine.

jbartcaps said:
You're not boned at all. I had that happen to me so I just got back into fastboot, downloaded the files in the OP put ADB, Fastboot and the adb extensions into the file I downloaded then ran the commands and got me XOOM back up and running fine.
Click to expand...
Click to collapse
You were likely in RSD 3, which is recognized by the computer. RSD 2 means adb and fastboot cannot see the device at all, so no flashing images is possible.
There's several states that all look very similar. Because some success was had with one doesn't mean it works for all. Motorola recognizes and is telling users that, in this state, the device needs to be sent back to them.

Can someone help us wifi xoom. Im stuck on the motorola screen and have a lil experience. I can fast boot reboot/fastboot device and it work but cant get the files from the hwi69 to fastboot on to it. I think im entering the commands wrong. Any advice would be appreciated

TheRedDroid said:
Hiya,
After dealing with a half-bricked Xoom, I did some research on this problem and found a solution.
If in any case, you happen to get stuck on the "Motorola Dual-Core Technology"
Solution to this (For the MZ604, One-Click rooted):
MZ604 Stock .imgs Download: http://developer.motorola.com/products/software/
*Make sure you have fastboot in the same directory as your adb for easy access*
1. Plug in your USB cord
2. Turn off your Xoom (Vol-Up + Power)
3. Boot into fastboot (Vol-Down + Power)
4. On your computer, open up a command prompt, and type the following:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash userdata userdata.img
fastboot erase cache
fastboot oem lock
-or-
Code:
fastboot flash boot <path to boot.img>
fastboot flash system <path to system.img>
fastboot flash recovery <path torecovery.img>
fastboot flash userdata <path userdata.img>
fastboot erase cache
fastboot oem lock
5. Reboot the Xoom
Code:
fastboot reboot
6. There you go, back to stock!
Click to expand...
Click to collapse
Very good info to get into fastboot protocol:

Much thanks for the info. Worked like a champ. On an updated 3.2.1 XOOM I did an unlock, re-locked the wrong way, soft bricked, unbricked back to locked state. Finally followed your steps applied stock files and XOOM is re-locked and stock rocking back at 3.01. I needed to do all this to make sure I could get it back to stock in case it goes back to BB in 2 weeks. I was lucky enough to find one at a BB just not sure if I'll keep it. I plan on trying out some roms plus I heard Motorola is planning on doing an ICS push to the XOOM. ICS is very nice. It runs great on my unlocked Verizon G-Nex.. Again Thanks..

This post not only saved my half-bricked non-rooted Xoom, but also let me flash it from the Singapore firmware (bought if from Amazon, don't ask lol) to the regular USA firmware so that I can properly root it!
Thank you so very much!!

[Q] Bricked one

os deleted and just stuck on one+ logo can boot in to twrp or fast boot what can i do?

brooklynchildxbc said:
os deleted and just stuck on one+ logo can boot in to twrp or fast boot what can i do?
Click to expand...
Click to collapse
Push a custom rom via adb and flash in recovery or flash stock images via fastboot

acuicultor said:
Push a custom rom via adb and flash in recovery or flash stock images via fastboot
Click to expand...
Click to collapse
i tried adb won't work and fastboot not doing anything i keeping getting a error saying that bootloader locked or can't erase
what really pisses me off i didn't even brick it a dumbass friend of mine did thinking he knew what he was doing.

brooklynchildxbc said:
i tried adb won't work and fastboot not doing anything i keeping getting a error saying that bootloader locked or can't erase
what really pisses me off i didn't even brick it a dumbass friend of mine did thinking he knew what he was doing.
Click to expand...
Click to collapse
Is fastboot working? Unlock bootloader and push custom recovery there. Go to adb sideload and that should work eventually. I had an issue with HTC One M7 - someone deleted sytem, and cyanogenmod installer helped, because it pushed CWM recovery, maybe try that one as well?

boober78 said:
Is fastboot working? Unlock bootloader and push custom recovery there. Go to adb sideload and that should work eventually. I had an issue with HTC One M7 - someone deleted sytem, and cyanogenmod installer helped, because it pushed CWM recovery, maybe try that one as well?
Click to expand...
Click to collapse
thank you so much i gave up then tried what you said then all of a sudden adb connected and i sideloaded the update file and got it back

brooklynchildxbc said:
thank you so much i gave up then tried what you said then all of a sudden adb connected and i sideloaded the update file and got it back
Click to expand...
Click to collapse
No problem. I'm glad I could help
Sent from my One using Tapatalk

brooklynchildxbc said:
thank you so much i gave up then tried what you said then all of a sudden adb connected and i sideloaded the update file and got it back
Click to expand...
Click to collapse
Don't give up.... I was in the same position like you for a couple days....and now is fix by my self..... If you unlock your bootloader try to lock back (fastboot oem lock) now try to flash via fastboot Philz Recovery ( try until is rebooting himself into recovery) .... After that put on a memory stick the new system .... You may need to mount the USB flash drive ..... That's exactly what I have done....Good Luck ...

It is damn near IMPOSSIBLE to actualy, truly "brick" these devices. There are way too many safeguards in place.
Be careful before announcing that you are "bricked". Bootlooping (which is what your device was doing) is not "bricked". As long as you have fastboot, you can always reflash recovery, and then use recovery to reflash your custom ROM (or you can bypass all of that and reflash the factory images from fastboot).
Don't panic, you know more than you think you know. Just don't get freaked out, and read. You'll be fine.

Soft bricked shield tablet PLEASE HELP!

So I bought my shield tablet back in March, used it until about may I think. Was browsing the internet then it suddenly crashed and got stuck on the Nvidia boot screen. tried to reboot several times. Nothing. So I forgot about it and thought I would just google the reset option later when I had time. Now since June I have tried everything! From factory reset to fast boot and adb my pc won't even recognize my tablet. Also I never turned on usb dbugging cause I didn't even know what that was. I even gave it to the IT guys at work and they couldn't fix it. Now after reading everything there is to read on this problem and trying to fix it myself I'm stuck on the no command screen with the dead android robot. And now I hear there is a recall do to the battery, I can't even check what type I have. So if someone can please help me I would be much appreciative. Also this happened after updating to the latest OS.

okay so i was able to unlock the bootloader and start flashing but from fastboot flash recovery.img and beyond it says failed to write. any ideas of why?

Ace0169 said:
okay so i was able to unlock the bootloader and start flashing but from fastboot flash recovery.img and beyond it says failed to write. any ideas of why?
Click to expand...
Click to collapse
Can you flash twrp and boot to it?

Ace0169 said:
okay so i was able to unlock the bootloader and start flashing but from fastboot flash recovery.img and beyond it says failed to write. any ideas of why?
Click to expand...
Click to collapse
Hello,
Did you use "Fastboot flash recovery.img" as your command line??
I believe it is "Fastboot flash recovery recovery.img"
If you were able to unlock bootloader you're on the right track.
Sent from a Locked Bootloader

Yes I used "fastboot flash recovery recovery.img" but every command after that keeps telling me "failed to write file"

danjull said:
Can you flash twrp and boot to it?
Click to expand...
Click to collapse
I'm a complete noob when it comes to this stuff, what is twrp? Haha

Ace0169 said:
I'm a complete noob when it comes to this stuff, what is twrp? Haha
Click to expand...
Click to collapse
TWRP (Team Win Recovery Project) is a custom recovery that you can flash on your device. You can flash it like the stock recovery over fastboot. With TWRP you can make full system backups, installing roms or other stuff, wipe partitions and more. Keep trying to install the drivers on your pc. Try to use another usb slot or boot your pc into test mode to install the driver. If you can still access the bootloader, you have really good chances to rescue your device.

Okay will try that. Thanks man.

Ace0169 said:
Okay will try that. Thanks man.
Click to expand...
Click to collapse
I see what your doing wrong. You probably don't even have the recovery img to flash. That's why it's giving you a write error.
There is a tutorial in the general section, that should have all the files and links, etc etc that you'll need to flash TWRP/CWM recovery and root the device if you want
Here is the link:
http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
Sent from my Nexus 5

Mojar7070 said:
I see what your doing wrong. You probably don't even have the recovery img to flash. That's why it's giving you a write error.
There is a tutorial in the general section, that should have all the files and links, etc etc that you'll need to flash TWRP/CWM recovery and root the device if you want
Here is the link:
http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
Sent from my Nexus 5
Click to expand...
Click to collapse
If your referring to the recovery images from Nvidia website I have dowloaded that, also the correct drivers. Maybe there is something else I'm missing?

Ace0169 said:
If your referring to the recovery images from Nvidia website I have dowloaded that, also the correct drivers. Maybe there is something else I'm missing?
Click to expand...
Click to collapse
First off, let me ask, what is your end result for the tablet?? Are you trying to just go a Complete stock tablet or are you trying to do anything custom (ex. Custom rom, recovery etc etc)
I'm assuming that since you unlocked your Bootloader, your trying to do something custom.
Sent from a Locked Bootloader

Ace0169 said:
If your referring to the recovery images from Nvidia website I have dowloaded that, also the correct drivers. Maybe there is something else I'm missing?
Click to expand...
Click to collapse
Those official nVidia recovery images come with smaller .img files such as recovery.img, system.img, etc. You'll need to flash those one by one ("fastboot flash recovery recovery.img", then run "fastboot flash system system.img", etc. etc.) or you can just run the flashall script that I think is included in the nVidia images.
Otherwise, if you want to flash TWRP, you'll need to download the TWRP recovery (you can rename it to "twrp-recovery.zip"). Then you'll need to "fastboot flash twrp-recovery.zip" in order to flash the twrp recovery to your tablet.

Mojar7070 said:
First off, let me ask, what is your end result for the tablet?? Are you trying to just go a Complete stock tablet or are you trying to do anything custom (ex. Custom rom, recovery etc etc)
I'm assuming that since you unlocked your Bootloader, your trying to do something custom.
Sent from a Locked Bootloader
Click to expand...
Click to collapse
I want my tablet to boot again, it's completely unusable in its condition I've heard re flashing will fix it.

Ace0169 said:
I want my tablet to boot again, it's completely unusable in its condition I've heard re flashing will fix it.
Click to expand...
Click to collapse
OK. Then the link I gave earlier should help flash stock software onto your tablet.
However, that guide is only to go back to factory "state" Operating System wise. It may not help with hardware. Once your flash everything correctly but device still doesn't boot, its probably not software related.
Sent from my Nexus 5

Mojar7070 said:
OK. Then the link I gave earlier should help flash stock software onto your tablet.
However, that guide is only to go back to factory "state" Operating System wise. It may not help with hardware. Once your flash everything correctly but device still doesn't boot, its probably not software related.
Sent from my Nexus 5
Click to expand...
Click to collapse
so ive followed the steps in the link, and ive executed all the commands but when i get to fasboot flash system system.img it says write failed. also all the commands beyond that one. ive got to be missing something. i have the image from nvidia developer, all the drivers, and my fastboot recognizes my device. has anyone encountered this before?

Ace0169 said:
so ive followed the steps in the link, and ive executed all the commands but when i get to fasboot flash system system.img it says write failed. also all the commands beyond that one. ive got to be missing something. i have the image from nvidia developer, all the drivers, and my fastboot recognizes my device. has anyone encountered this before?
Click to expand...
Click to collapse
After you unlocked the device but before trying to flash anything else on the device, try putting the shield into Fastboot mode. At the bootloader, select fastboot using the volume buttons.

koop1955 said:
After you unlocked the device but before trying to flash anything else on the device, try putting the shield into Fastboot mode. At the bootloader, select fastboot using the volume buttons.
Click to expand...
Click to collapse
Select "fastboot protocol"? Is that correct?

Ace0169 said:
Select "fastboot protocol"? Is that correct?
Click to expand...
Click to collapse
So i selected "fastboot protocol" it blipped for a second then brought me back to the bootloader. tried flashing again and once i reached the fastboot flash system system.img it said write failed again. did it not engage the "fastboot protocol"?

Bringing you back to the bootloader was expected behavior. The "write fail" is a mystery to me. Sorry, that is all that I can offer.

koop1955 said:
Bringing you back to the bootloader was expected behavior. The "write fail" is a mystery to me. Sorry, that is all that I can offer.
Click to expand...
Click to collapse
@Ace0169 Same, not sure what else to tell you. Sorry sir.
Sent from a Locked Bootloader

Trying to flash TRWP Moto Z recovery - not working

Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork

spacezork said:
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
Click to expand...
Click to collapse
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar

the ljubich said:
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
Click to expand...
Click to collapse
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork

spacezork said:
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
Click to expand...
Click to collapse
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.

the ljubich said:
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
Click to expand...
Click to collapse
Sorry for my confusion with adb/sideload - from what I understand I need both to be able to connect to my device (correct me if im wrong). In the bootloader menu I see "flashing_unlocked" which I believe confirms my bootloader being unlocked, but then at the top of the text right under the dead android guy I see "AP Fastboot Flash Mode (Secure)" could that be an issue?
I can retry downloading the recovery from the TWRP site, but I know I'm downloading the official one already, just can't put my finger on why I'm getting that error message if others are doing it successfully.
thanks for helping :good:

Do you have the Verizon model?

samwathegreat said:
Do you have the Verizon model?
Click to expand...
Click to collapse
I have the canadian BELL model XT1650-03

spacezork said:
I have the canadian BELL model XT1650-03
Click to expand...
Click to collapse
You're at the bootloader, it says Flashing Unlock so yes your bootloader is unlocked and you should be able to flash TWRP no problem.
Did you recently install this .45 firmware? Are you sure that TWRP wasnt actually flashed? I see lots of errors like this from the bootloader and its usually just rubbish.

The twrp does not show the actual memory value of my cell phone and does not let me paste ROM backup, from insufficient memory? how to support it?

I updated my phone to .45 when I bought the phone I believe 1-2 weeks ago, it's definitely NOT flashed as the flashing process runs for 0.2 seconds and fails. I can even boot in the stock recovery afterwards confirming that nothing flashed. I wish I knew what I was doing wrong? possibility of drivers not installed properly?
Before I try and flash recovery I check USB debugging, OEM is unlocked, don't verify ADB files and accept Unknown sources. Is there anything I'm missing?

What if fastboot boot twrpname.img
It's really weird anyway...

enetec said:
What if fastboot boot twrpname.img
It's really weird anyway...
Click to expand...
Click to collapse
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.

spacezork said:
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
Click to expand...
Click to collapse
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...

enetec said:
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
Click to expand...
Click to collapse
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.

spacezork said:
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
Click to expand...
Click to collapse
Right, bootloader screen. Enter on it by key-comb... not by command...
Even the real flash take same time... Sending seems to work, is something on verify that doesn't "like" it...
Try to download again recovery and/or check its MD5...

if reading correctly (and what I told you yesterday) command is
fastboot flash recovery recovery.img
and not
fastboot flash recovery.img

hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????

Troll amiga said:
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Click to expand...
Click to collapse
try following this instructions: http://forum.xda-developers.com/showpost.php?p=69065373&postcount=14
and download eu rom from here: https://mirrors.lolinet.com/firmware/moto/griffin/official/RETEU/
i don't know from which ROM you are coming, don't know if downgrading works, but this was onl RETEU ROM i could find.

I have the exact same phone and I've upgraded to Nougat but I got my TWRP working. You need an unlocked bootloader and after upgrading to nougat, the option "unlock OEM" need to be enabled again.
I've used this TWRP : https://dl.twrp.me/griffin/twrp-3.0.2-0-griffin.img.html
Also I tried to only boot on it at first with the command fastboot boot twrp.img then I saw it was working, I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.

cilk said:
...I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
Click to expand...
Click to collapse
Yeessss... I don't know how could I forgot it!!! :silly:
The message (I forgot I received too...) is *only* to indicate that recovery is not signed! But before there is a clear "Done" confirming the flash!
Just boot on it!

Stuck in Bootloader (Solved)

So i recently tried flashing a new kernel and for whatever reason my pixel 2 did not like that at all. Upon reboot after flashing it now just goes into the download mode where i have the option to reboot bootloader go into recovery and go into download mode. Normally not a big issue at all but this time when i go to load into recovery or load into Download mode its says Operation Denied. Upon a reboot or trying to reboot into safe mode it says ERROR: Slot unbootable: Load Error. Will ADB still work to flash this? not really sure what to do at this moment.
EDIT: Solved it by using Fastboot and flashing the stock firmware without the -w so far everything is back to normal....know to get that dern kernel again

gears177 said:
So i recently tried flashing a new kernel and for whatever reason my pixel 2 did not like that at all. Upon reboot after flashing it now just goes into the download mode where i have the option to reboot bootloader go into recovery and go into download mode. Normally not a big issue at all but this time when i go to load into recovery or load into Download mode its says Operation Denied. Upon a reboot or trying to reboot into safe mode it says ERROR: Slot unbootable: Load Error. Will ADB still work to flash this? not really sure what to do at this moment.
Click to expand...
Click to collapse
First off, does fastboot recognize the device?

DuckRuckus said:
First off, does fastboot recognize the device?
Click to expand...
Click to collapse
It does not under adb devices nothing shows up. In device manager it does show up as Android bootloader interface

gears177 said:
It does not under adb devices nothing shows up. In device manager it does show up as Android bootloader interface
Click to expand...
Click to collapse
ADB=system. Fastboot=boot. You can't boot your phone, so you're not in android, thus no ADB devices. Type "fastboot devices" and see if it's recognized.

DuckRuckus said:
ADB=system. Fastboot=boot. You can't boot your phone, so you're not in android, thus no ADB devices. Type "fastboot devices" and see if it's recognized.
Click to expand...
Click to collapse
Ah nice didnt even realize its recognized under fastboot ive tried flashing the stock recovery but it just gives me an error

gears177 said:
Ah nice didnt even realize its recognized under fastboot
Click to expand...
Click to collapse
Good news! So, your best bet at this point would be to re-flash your current factory image, with /w removed. If you still want that same kernel, flash it before Magisk.
Just out of curiosity, what method did you use to flash it in the first place?

DuckRuckus said:
Good news! So, your best bet at this point would be to re-flash your current factory image, with /w removed. If you still want that same kernel, flash it before Magisk.
Just out of curiosity, what method did you use to flash it in the first place?
Click to expand...
Click to collapse
Flashed it through twrp aroma installer.
What does the -w do in the fastboot command just curious
Nevermind got it flag responsible for deleting userdata thanks alot for the help appreciate your time

gears177 said:
Flashed it through twrp aroma installer.
What does the -w do in the fastboot command just curious
Click to expand...
Click to collapse
It wipes all your data, that's why you remove it from the flash-all.bat script, unless you need to perform a full wipe. Telperion has an excellent guide for installing the lastest software, if you haven't already read it.
I've heard users having back luck flashing kernels in TWRP, as the kernel has something to do with recovery. I always use the method of booting the TWRP image in fastboot, use ADB to push the files to /tmp, and then do an ADB shell TWRP install of those files. TWRP, kernel, then magisk, in that order. I always reinstall all three, just to be on the safe side, and have never had any issues. Takes a little while, but not as long as redoing the whole freaking thing:silly:
Looks like you figured it out, before I finished my reply