Hello. I flashed my phone following these instructions. http://forum.xda-developers.com/showthread.php?t=2681166 Everything works great except for data. I have tried the stock verizon rom 4.3 and 4.4.2 with no success. I have tried Cyanogenmod with no luck as well. I am stuck with 1x. I have tried resetting my esn. I have reflashed the rom onto the phone 3 times. Reprogrammed OTA countless times and still can not get 3g to work. I have done some digging and have yet to come up with a solution. I need a direction to go on this. I have attached my screen shots of DFS tools. Thank you for your help!
Interestingly enough I can get it to now show that there is 3g but only when I am connected to my wireless home network. As soon as I disconnect it then it reverts back to 1x.
Fixed.....
I am not sure exactly why this didn't work before. Retried installing 4.3 and did my changes again in DFS. Rebooted my phone and everything is working great. Verified procedure with second moto g.
I am having the exact same issue. How did you fix it?
Related
Okay, so I read and read, searched and searched. So far I'm pretty stuck.
I did a ton of research before taking my LG P500h, and flashing the ROM because I wasn't a fan of the Froyo android setup. Did everything properly, ran an nandroid backup, everything that I was told to do.
Rooted using Gingerbreak APK, custom backup using Amon_RA custom recovery. All done using the latest USB drivers LG updated me with.
I am currently with Koodo Mobile here in Canada. Pretty much an offspring of Telus Mobile. Currently I am running Cyanogen Mod 7 the 6.5.7 beta build, and the phone is not bricked, or giving me any errors or hassle.
The problem is that I cannot use the 3G network or use the Koodo network. It only defaults to Telus towers. No android market showing up anywhere either. From what I've found on here, there doesn't seem to be a bugfix solution to this, and no settings I've been able to change on the phone has helped my situation. Maybe I missed something.
So, I decided to take it back to where I began, back to Froyo 2.2.1 . This is where it all went wrong. Tried going through the Nandroid backup and restoring that, I was given an " Error : run 'nandroid-mobile.sh restore' via adb! " . Okay, I'm not exactly a Java programmer so I'm a little intimidated. I do however have Android SDK going on my laptop.
Some more searching revealed the KDZ_FW_UPD.exe flashing method. I got the right KDZ file for my Koodo phone, V10V_00.kdz and began the process. Everything checks out, good to go, started update. Wait, phone not found? WTF! My laptop recognizes it, says my phone is connected and working. No problems here, just can't find it? UGH.
So, I need someone to either give me info on getting it to flash the kdz, or get Cyanogen Mod 7 working properly on my device.
Please help, I'll fully admit I'm a noob to this, and not an expert programmer either. But, I know computers and I fully understand what I have done so far to my phone. Just not enough to fix it.
Okay, I have gotten some things working on my phone. I think I am settling into Cyanogen Mod nicely. I missed the Google apps flash zip so I have my market and stuff. Its a shame the data does not work though. Oh well I will keep updating as it gets developed.
Sent from my LG-P500 using XDA App
GOT IT! finally...
Finally got my phone recovered to OEM specs. I had to restore my computer back to before I installed all my drivers and reinstalled all my USB drivers from there. Phone connected to USB properly, ran the KDZ updater, and it sucessfully installed the V10V kdz. All is well.
finally good luck.. enjoy androiding..
When you flashed the cyanogen mod rom what program did you use to flash the phone? And how did you make a rom backup? When you reflashed the stock rom did it still have all the original bloatware?
LG Optimus P500h TELUS became dead during Upgrading
Hi everybody!
I have LG Optimus P500h Telus. I purchased from Kijiji. I don't have any papers or documents for that so i cannot claim its warranty.
I was trying to upgrade its version during upgrading my device was stuck so I disconnected and plugged out its battery and inserted again. When i tried to turn it on. It never turned on again. It never ever appeared emergency mode again. I tried for several times by pushing home, power, and volume up and down buttons, and escape buttons. Now its just like dead. It never showed any sign of life. If anybody have any idea what happened with it and how I can recover or where I should take this one for repairs. I am in toronto, canada.
Your help and suggestions will be appreciated.
HELP!
http://forums.androidcentral.com/t-lg-phoenix-thrive/127858-jobans-kernel-2-08-overclock-cm7-2-3-7-etc-gyro-fixed-60.html
My problem starts from post #600
Please.
Please bare with me since this is the first time having to post for an issue since I usually find an answer on your forums
So here's the situation.
I bought the photon q 4g lte from ebay and it came with the unlocked bootloader.
Needless to say it was with the stock ics and i tried to find a jellybean update because it wasn't taking the ota and ended up going with cyanogen since i had no problems before. However those phones i had before were with sim cards not cdma.
I found out i couldn't update prl or profile manually without having to do something on the pc.
So after searching left and right i found i could use rsl lite (I used 6.1.5) and eventually found the "stock" file from this post
http://forum.xda-developers.com/showthread.php?t=2095536&highlight=rsd+lite
I did the stock jellybean, got it to go through the process and it booted up with no errors.
However, when it boots into the os it pops up a force close on omadmclient_sprint_dataservice and eventually also on the process com.android.phone.
I tried putting it in airplane mode to see if the service error would go away but it didn't work for the process part crashing.
I tried re-flashing, deleting cache in recovery, doing a data/factory reset in recovery and the one time i was able to do a data factory reset within the settings menu.
I could not find anyone that said they had a rom that worked with sprint and updating prl within the rom, if anyone knows of one let me know and i will flash it through rsd.
Otherwise does anyone have an idea of what could be happening because googling the omadmclient part did not pull up anything specific and pulling up the process issue for other phones has not helped me either.
Was this a hacked GSM phone, or are you using it as CDMA?
I've never heard of people having FC issues after flashing a FXZ from RSD. Which one did you flash? Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock) ?
If you are on stock, you should be able to update the PRL within the ROM.
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
crispy6 said:
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
Click to expand...
Click to collapse
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
arrrghhh said:
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
Click to expand...
Click to collapse
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
crispy6 said:
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
Click to expand...
Click to collapse
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
arrrghhh said:
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
Click to expand...
Click to collapse
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
crispy6 said:
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
Click to expand...
Click to collapse
To downgrade to ICS, you need to remove some additional lines. See this post for more information on that.
However, you should be able to update the PRL on either stock ROM.
I think I said this before, but I will say it again. You need to do PRL updates, activate the phone, and get EVERYTHING working on stock BEFORE you flash ANY custom ROM. This is just standard practice - you don't want to put the cart before the horse! Get the phone working, then play with custom ROM's.
Hello peoples, hoping for a little help here.
TLDR; After downgrading firmware (big mistake) from 629, i reflashed back to 629 only to discover that my wifi will either connect and work intermittently, or (as is the case ATM) my wifi will connect and immediately disconnect, everytime it connects. I would like some guidance on how to get wifi working consistently, regardless of what firmware i need to be on, or what rom I need to flash. If i can get a rom that has wifi and camera that would be a plus. I searched and found one or two threads on the issue but related to earlier OTA upgrades.
More details;
Accidentally phsically destroyed my SG S3 a week ago or so, which meant I had to go back to using my wifes Motorola Droid 2 Global
Decided that since I was stuck on Gingerbread, and that since Verizon doesnt care about D2G anymore, I was going to root and upgrade, so I started researching and experimenting. That was my first mistake
So I;
- Tried to downgrade to 2.4.330 firmware per the (wiki.cyanogenmod.org/w/Install_CM_for_droid2we) Cyanogenmod wiki instructions for droid 2 global, which "soft bricked" my device (stuck in bootloader with a "service req'd" message). From doing a bunch of searching online and reading, I'm guessing its because the phone was previously on the latest version of android pushed to the droid 2 global, namely, 4.5.629.
- I then found (rootzwiki.com/topic/23207-how-to-sbf-unbricking-root-d2g-629/"official 629 sbf) and reflashed my device with that (the link at the top of the thread)
- I dont remember everything I did next (or if i even tested wifi at that point), but i know the device booted and "looked normal". I know I then rooted with framaroot, and installed bootstrap mod (1.0.0.5), and did a bootstrap recovery (im guessing this is synonymous with installing clockwork mod??)
- Found and flashed (installed?) CM9-D2-01032013.zip (cant post links, sorry new user restriction) -- rootzwiki.com/topic/28082-d2d2gdx-cm9-build-thread/page-90
- The rom installed fine, but when I booted up, and tried to use wifi, the wifi would connect, but the internet wouldnt work (no response from any website).
- I downloaded some kind of "wizard" bootloader, that had a wifi fix (sorry I cant find the link). I rebooted into the bootloader, ran the wi-fi fix, and then rebooted. No luck (no change).
- I figured it was an issue with the ROM, so I flashed liquid_droid2we-ics-v1.62.zip
- Unfortunately, the same issue persisted.
- I then reflashed BACK to 4.5.629, using the --(cant post links apparently since im a new user) (rootzwiki.com/topic/23207-how-to-sbf-unbricking-root-d2g-629) -- "official 629 sbf"
- Wifi STILL does not work. At first it connected, and was responding, and then it stopped responding.
- Wiped cache partition
- Wiped data/factory reset
- wifi now connects, then disconnects immediately.
I'm at a loss here. I am on 4.5.629 using the official ROM, I tried a factory reset after a cache clear. I even found some suggestions about turning battery saver mode off, which I did. WTH am I doing wrong?
EDIT 9/19: Just discovered that I can connect to insecure networks just fine. I've read about changing my router settings as a possible fix, but I cant do that for any router thats not my own. In addition the wifi was working on my router before, with the same settings, so the phone broke somewhere along the way.
I was able to resolve the wifi issues I was having by simply unplugging my modem and router (though just rebooting the router would have probably fixed it). I don't know exactly what caused the issues, but it was probably multiple factors, including having a droid2 and droid2global right next to each other trying wifi, flashing multiple roms, and having dd-wrt firmware on my router (or all of the above). In anycase, doing a reboot of the router, caused wifi to work again consistently on both my droids.
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Sonic-NKT said:
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=47978878#post47978878
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Also this talks about GSM Data problem, i cant even do phonecalls/sms, its not even asking for my sim code..
I then tried to flash back to stock but now RSD Lite 6.1.5 wont show my device... (all drivers installed).
Im really getting frustrated.
EDIT:
ok tried another PC with Win7 (mine runs 8.1) and now RSD Lite seems to work
Update: Now back to stock... GSM Works fine after i activated it... i now try to reflash cm10.2 and see what happens
Ok its working now
everything out of the box...
i dont know what went wrong the first time cause i did exactly the same as far as i know...
Sonic-NKT said:
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Click to expand...
Click to collapse
Indeed this line was likely the relevant one
If missing just add it.
Somehow I ****ed up and now my phone cannot receive cellular signal at all. In about phone, IEMI number is unknown and in SIM card info, everything is unknown. What I did was this.
1. Flash CSC Selector on my existing ROM selecting ATT CSC. Everything was fine (aside from no voice/wi-fi calling)
2. Wanted to update to latest stock PDA/radio/bootloader so I did (through Odin.) Everything still good.
THIS IS WHERE **** HIT THE FAN
3. Flashed TWRP.
4. Formated data, flashed CSC selector selecting ATT, flashed Makisk, flash Makisk-PHH rot.
After that, no cellular signal at all.
Can someone help please? I really need this phone for work and if I can't get it working tonight, I'm going to have to go to AT&T store and ask for the cheapest phone they got until I can get this fixed...
BTW I already tried re-flashing everything to stock through Odin and it did not help.
http://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516
Follow the instructions. Faced the same problem took hours to figure the **** out.