Please bare with me since this is the first time having to post for an issue since I usually find an answer on your forums
So here's the situation.
I bought the photon q 4g lte from ebay and it came with the unlocked bootloader.
Needless to say it was with the stock ics and i tried to find a jellybean update because it wasn't taking the ota and ended up going with cyanogen since i had no problems before. However those phones i had before were with sim cards not cdma.
I found out i couldn't update prl or profile manually without having to do something on the pc.
So after searching left and right i found i could use rsl lite (I used 6.1.5) and eventually found the "stock" file from this post
http://forum.xda-developers.com/showthread.php?t=2095536&highlight=rsd+lite
I did the stock jellybean, got it to go through the process and it booted up with no errors.
However, when it boots into the os it pops up a force close on omadmclient_sprint_dataservice and eventually also on the process com.android.phone.
I tried putting it in airplane mode to see if the service error would go away but it didn't work for the process part crashing.
I tried re-flashing, deleting cache in recovery, doing a data/factory reset in recovery and the one time i was able to do a data factory reset within the settings menu.
I could not find anyone that said they had a rom that worked with sprint and updating prl within the rom, if anyone knows of one let me know and i will flash it through rsd.
Otherwise does anyone have an idea of what could be happening because googling the omadmclient part did not pull up anything specific and pulling up the process issue for other phones has not helped me either.
Was this a hacked GSM phone, or are you using it as CDMA?
I've never heard of people having FC issues after flashing a FXZ from RSD. Which one did you flash? Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock) ?
If you are on stock, you should be able to update the PRL within the ROM.
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
crispy6 said:
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
Click to expand...
Click to collapse
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
arrrghhh said:
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
Click to expand...
Click to collapse
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
crispy6 said:
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
Click to expand...
Click to collapse
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
arrrghhh said:
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
Click to expand...
Click to collapse
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
crispy6 said:
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
Click to expand...
Click to collapse
To downgrade to ICS, you need to remove some additional lines. See this post for more information on that.
However, you should be able to update the PRL on either stock ROM.
I think I said this before, but I will say it again. You need to do PRL updates, activate the phone, and get EVERYTHING working on stock BEFORE you flash ANY custom ROM. This is just standard practice - you don't want to put the cart before the horse! Get the phone working, then play with custom ROM's.
Related
I am sending my phone back into samsung for repair, and I want to bring it back to its stock condition. I have unlocked the bootloader, flashed CW recovery, and installed superuser with no problems, however cannot seem to figure how to go into reverse. I understand how to re-lock the bootloader. I have read on the forums through the countless amounts of people asking this. I am however trying to use the ROM for the GTJ61 build found from this thread http://forum.xda-developers.com/showthread.php?p=13478981 When I try to use Clockwork Recovery, and go to restore, it states there is a MD5 mismatch. Am I suppose to install from zip or update from SD with CWR, or should I try to flash everything back onto there? I do not know what to do. Am I even trying to use the right ROM? The GTJ61 build is the original build that came on my phone, but would another one work?
follow this thread http://forum.xda-developers.com/showthread.php?t=1033269
all you have to do is clear your data, flash the stock rom and stock recovery, and then lock the bootloader
Thank you very much. I figured it out. All I have to do now is destroy the evidence on my sd and seen my NS away.
I realize superuser is still alive and well after I did everything. How I would I get rid of it?
I just uninstalled it. it might have gotten restored when you logged in with your gmail account. did you wipe data and the cache with cwm before you flashed the rom?
edit: did the ots update to 2.3.4 install fine for you?
I am guessing you mean ota. I ended up using the 2.3.4 rom. Should I have used the 2.3.3? Yes I did clear out the cache and factory reset.
SleepyFox said:
I am guessing you mean ota. I ended up using the 2.3.4 rom. Should I have used the 2.3.3? Yes I did clear out the cache and factory reset.
Click to expand...
Click to collapse
I did mean ota lol. my bad. where'd you get a 2.3.4 rom from?
edit: if you used the 2.3.4 rom from the thread you posted, just be aware that it isn't official. i'm not sure if the link I posted has the official rom, but you can download OTA updates with it so I would assume that it's pretty damn official lol
I don't know too much on the subject, but I'm afraid that since it is a different build in the link you suggested that I will mess up my radio settings. I don't know if it would make a difference but when I did install superuser it was from CWR and not adb from the command prompt. Do think I should use the 2.3.3 rom you suggested?
SleepyFox said:
I don't know too much on the subject, but I'm afraid that since it is a different build in the link you suggested that I will mess up my radio settings. I don't know if it would make a difference but when I did install superuser it was from CWR and not adb from the command prompt. Do think I should use the 2.3.3 rom you suggested?
Click to expand...
Click to collapse
I don't know much about it either, but I would assume that you should put it on a stock rom if you're sending it back into samsung. I could be totally wrong though
I just am not sure if having super using on there would make a difference. They are suppose to do a wipe anyway. But I will contact them to make sure. It would still be nice to have superuser gone though.
SleepyFox said:
I just am not sure if having super using on there would make a difference. They are suppose to do a wipe anyway. But I will contact them to make sure. It would still be nice to have superuser gone though.
Click to expand...
Click to collapse
I would guess that superuser would be one of the first things they check for to see if you broke warranty. you could just uninstall it and wipe everything through cwm again to make sure it's gone
I managed to fix everything. I just was searching through the system folder of the 2.3.4 rom and to my surprise there was little old superuser. So I deleted the .apk and bin files. After that I restored the ROM. Fixed everything. The stress of sending in a phone with superuser is gone and I am back to being stocked
Two questions for you OP:
1. How do you have a warranty on a I9020A? Is it the subsidized version from Best Buy (i.e. "AT&T's sanctioned model")
2. Why do you need warranty repair? What broke?
Yes I got my phone from best buy. I just registered the imei with samsung and I am under the 1 year warranty. I have a problem with my battery draining 80% in 6 hours little to no use with all radios besides 2g turned off. I know that the NS has not so stellar battery life, but there is genuinely a problem with mine. It cannot even survive for half a day.
Hmm, I had that very issue with three past i9020a's (two from Amazon, one white one from Newegg). They were all the Rogers model, which is said to be identical to the one Best Buy is selling as a subsidized model.
I just bought another i9020a on eBay (no, I never learn) and hope to try some fancy methods to save on battery life (ROMs, etc). I also experienced VERY slow 3G with the i9020a on AT&T's 3G network here in the US. Like 300kbs download slow. I read that if you flash the radio to KB3 it gets very fast, like HSPA 3G should be.
I don't care about rooting and flashing because my phone will not have a warranty. I do, however, suspect that there is nothing wrong with your phone, rather the battery life is just random. One of the i9020a models I had drained a fresh charge in like 3 hrs of sitting idle w/full bars. The phone was burning hot. I restarted it, charged it up, and it lasted over 16 hrs the next time. Very erratic and strange, but that seems to be par for the course with the NS.
I would first see if the phones you bought were registered yet. You never know when you would need samsung to take care of something for you. The correct radio for the US ATT is UCKE1. You should be getting data speeds of about 3.3 megabits. My battery has been consistently low.
SleepyFox said:
The correct radio for the US ATT is UCKE1.
Click to expand...
Click to collapse
So that may explain what's different between the international (i.e. Canadian) I9020A and the "Best Buy" AT&T sanctioned I9020A...a different radio?
Is it possible to flash the KB1 radio of the Canadian I9020A to the AT&T friendly UCKE1 radio?
So I originally rooted my S3 using odin and a stock verizon software followed by using ez bootload unlock, ez recovery, and clockwork mod. I used the custom rom cyanogen mod, and eventually continued to update those roms when they rolled out the OTA updates. When the latest update came out on the 18th I noticed an issue with my contacts. Due to this I reverted to the 16th rom, but something went terribly wrong. At this time I tried re-rooting, tried different types of rooting and got my device working along with my contacts back, but it rendered my sim card useless. I tried everything I could find on the internet. I finally covered my tracks and took it to the verizon store. They replace the sim card, but it still didn't work. They replaced my device, and me being dumb I rooted it again. Same original rooting that worked the first time. It worked at first, but then the same issue occurred. I'm not sure what to do, I can't go back to verizon again. They will expect something this time. It makes no sense. The hardware is not an issue, there is some data error somewhere. PLEASE HELP!!!
TLDR; Crazy weird data issue maybe? Whoever can solve this will be the House of Android rooting.
a.p.mahaney said:
So I originally rooted my S3 using odin and a stock verizon software followed by using ez bootload unlock, ez recovery, and clockwork mod. I used the custom rom cyanogen mod, and eventually continued to update those roms when they rolled out the OTA updates. When the latest update came out on the 18th I noticed an issue with my contacts. Due to this I reverted to the 16th rom, but something went terribly wrong. At this time I tried re-rooting, tried different types of rooting and got my device working along with my contacts back, but it rendered my sim card useless. I tried everything I could find on the internet. I finally covered my tracks and took it to the verizon store. They replace the sim card, but it still didn't work. They replaced my device, and me being dumb I rooted it again. Same original rooting that worked the first time. It worked at first, but then the same issue occurred. I'm not sure what to do, I can't go back to verizon again. They will expect something this time. It makes no sense. The hardware is not an issue, there is some data error somewhere. PLEASE HELP!!!
TLDR; Crazy weird data issue maybe? Whoever can solve this will be the House of Android rooting.
Click to expand...
Click to collapse
Why don't you try to Odin a pre-rooted Verizon stock can be found here http://forum.xda-developers.com/showthread.php?t=1984436 to see if it addressed both our your issues?
I just had some major issues with this as well. There is something wrong with the nightly versions of CM 10.1.
Like you - I flashed CM 10.1 12/18 and found that my data was not working. I then searched this forum and found that other users were having the no data issue as well. I decided that I would do the same and flash back to an earlier CM 10 release from December, but the update did not go as expected. Due to going 10.1 to 10 I had to wipe data/cache/dalvik. At this point I got CM 10 reinstalled, but the phone came up with NO cell coverage. I went to System Settings -> About -> Status and found that the phone was no longer registering my cellular network (Verizon) or phone number. My IMEI data was dead.
Luckily in my case I had already made backups of my IMEI data per this post: http://forum.xda-developers.com/showthread.php?t=1852255
I restored my IMEI and reflashed CM 10 12/16. Everything is now working as expected. Your issue sounds identical to mine - I just spent half the day fighting with the exact same issue. I definitely learned my lesson about staying so current with the NIGHTLY builds for day-to-day non-dev use. I knew it before, it just never bit me like this.
Anyways, I hope this information helps you somewhat. Good luck!
a.p.mahaney said:
So I originally rooted my S3 using odin and a stock verizon software followed by using ez bootload unlock, ez recovery, and clockwork mod. I used the custom rom cyanogen mod, and eventually continued to update those roms when they rolled out the OTA updates. When the latest update came out on the 18th I noticed an issue with my contacts. Due to this I reverted to the 16th rom, but something went terribly wrong. At this time I tried re-rooting, tried different types of rooting and got my device working along with my contacts back, but it rendered my sim card useless. I tried everything I could find on the internet. I finally covered my tracks and took it to the verizon store. They replace the sim card, but it still didn't work. They replaced my device, and me being dumb I rooted it again. Same original rooting that worked the first time. It worked at first, but then the same issue occurred. I'm not sure what to do, I can't go back to verizon again. They will expect something this time. It makes no sense. The hardware is not an issue, there is some data error somewhere. PLEASE HELP!!!
TLDR; Crazy weird data issue maybe? Whoever can solve this will be the House of Android rooting.
Click to expand...
Click to collapse
You most likely lost you imei/min or something, you can check in settings>about phone>status. Easy way to correct it is to flash a older stock ICS image and use the reprovision code. Flash this in odin then type this in the dialer *2767*3855# and that should fix ya back up. Flashing anything carries a risk of dropping your imei but it happens much more on AOSP roms.
Hello, this is my first time posting on the forums here.
Recently I flashed the latest version of MIUI on my Verizon Galaxy s3. I decided that I preferred my previous rom; Jelly Bean's Build 10, and I restored it to my phone. After restoring the rom, I got a message saying that I was roaming, even though I am still in the same area where service has been working flawlessly. The first thing I tried to do was change the network type under network settings to LTE/CDMA but that choice was already selected. Thinking that I had no other options, I restored the stock rom that I had backed up on my device and I got the same issue. Thinking I could just send the phone back to Verizon, I unrooted the phone using the built in unroot tool in SuperSu Pro. I am now unrooted, but forgot to reflash the stock recovery (I am still using TWRP). I am just wondering what I should do about the issue, and if I were to send it back to verizon, would they be able to tell that I have a custom recovery. Sorry for being a noob and any help would be much appreciated.
Update: I rolled back to my rooted stock ROM and I used triangle away to reset the custom flash counter. I have also reflashed the stock recovery onto my device. Even though my phone appears to be unmodified I still have the same issue.
Sent from my SCH-I535 using xda app-developers app
there are SOOO many threads about how to fix the roaming issue it's not even funny....
^^^^^what he said!
This happened to me and what I had to do was ODIN to stock ICS rom and enter the code to reprovision sim. Google/forum search is your friend.
This is why Verizon locks down their phones! People who are not willing to search for a way to fix something that they screwed up is unacceptable. The bad thing is this phone is completely fixable with very little effort! Some people should not be allowed to flash anything!
I've dealing with so many issues ever since the DroidX so if there is one thing I've learned is there is ALWAYS a fix you may just need to do a little search if you can't find the resources your looking for on any of forums a simple google search will help you out.
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Sonic-NKT said:
Hi,
i tried to flash cm 10.2 on my photon Q today.
I had the latest official rom working for half a year but i was missing some features i couldnt get with stock.
Anyway its a simcard modded unit i use in germany i was running stock jellybean (rooted, motochopper method) until today.
First i unlocked the boatloader, flashed latest open recovery and then flashed CM10.2 latest nightly (GSM) + gapps, after that i did a factory reset with open recovery.
After i configured the new firmware i noticed that i had no gsm, it didnt even ask for the pin of my locked card. I tried to switch from CDMA to GSM but with no effect. I also tried several reboots but i couldnt change the mobile network or get gsm to work.
I then tried to flash the latest cm snapshot but it doesnt work as well, the only difference is that the phone service always crashes when i try to change the network method.
Doesn anyone else have a idea? The thing is currently useless to me...
Thanks in advance.
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?p=47978878#post47978878
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Also this talks about GSM Data problem, i cant even do phonecalls/sms, its not even asking for my sim code..
I then tried to flash back to stock but now RSD Lite 6.1.5 wont show my device... (all drivers installed).
Im really getting frustrated.
EDIT:
ok tried another PC with Win7 (mine runs 8.1) and now RSD Lite seems to work
Update: Now back to stock... GSM Works fine after i activated it... i now try to reflash cm10.2 and see what happens
Ok its working now
everything out of the box...
i dont know what went wrong the first time cause i did exactly the same as far as i know...
Sonic-NKT said:
i looked at the build.prop and those options except:
ro.telephony.default_network=3
dont appear in the file...
Click to expand...
Click to collapse
Indeed this line was likely the relevant one
If missing just add it.
Kind of long, but it's just a difficult explanation, please read and try to help me. Thank you.
Okay, so I have a really weird problem, and I can't seem to fix it at all. I unlocked the bootloader and rooted my Sprint Motorola Photon Q, and had no problem with data loss, then I flashed PAC Man Rom, and everything went fine and it flashed but then I noticed that I had no data. No 3G, 4G, or 4G LTE, the phone lost network signal, but what was weird is that I could still receive texts and phone calls.
So, then I read that wiping the Dalvik and the regular cache would fix it, and it didn't. Then, I also tried flashing a different ROM which also didn't fix it. I RSD back to stock firmware and the problem was gone. I even tried rerooting and just installing a different ROM but, it still had the same issue, so I just went back to stock again.
Can someone please help me fix this? I've looked everywhere and I can't really find anything to help me out with this.
Thank you in advance.
Is your provider Sprint as well...?
I'm not sure, data works here on custom ROM's... which version are you flashing? Have you tried CM11?
There's some new device unification going on, the newest KK builds are going to be under the "moto_msm8960" device instead of xt897...
No I haven't tried CM11. Where do I find the IMG for it at?
I have Flash Wireless, which is Sprint prepaid. I have tried CM11 and still nothing. I don't understand what is going on....I'm getting real frustrated because I want to put a good custom ROM on my phone....
thebizerker2014 said:
I have Flash Wireless, which is Sprint prepaid. I have tried CM11 and still nothing. I don't understand what is going on....I'm getting real frustrated because I want to put a good custom ROM on my phone....
Click to expand...
Click to collapse
Perhaps that's the issue. Did you check your APN settings? Is it using Sprint's network?