[Q] LG P500h with recovery issues... - General Questions and Answers

Okay, so I read and read, searched and searched. So far I'm pretty stuck.
I did a ton of research before taking my LG P500h, and flashing the ROM because I wasn't a fan of the Froyo android setup. Did everything properly, ran an nandroid backup, everything that I was told to do.
Rooted using Gingerbreak APK, custom backup using Amon_RA custom recovery. All done using the latest USB drivers LG updated me with.
I am currently with Koodo Mobile here in Canada. Pretty much an offspring of Telus Mobile. Currently I am running Cyanogen Mod 7 the 6.5.7 beta build, and the phone is not bricked, or giving me any errors or hassle.
The problem is that I cannot use the 3G network or use the Koodo network. It only defaults to Telus towers. No android market showing up anywhere either. From what I've found on here, there doesn't seem to be a bugfix solution to this, and no settings I've been able to change on the phone has helped my situation. Maybe I missed something.
So, I decided to take it back to where I began, back to Froyo 2.2.1 . This is where it all went wrong. Tried going through the Nandroid backup and restoring that, I was given an " Error : run 'nandroid-mobile.sh restore' via adb! " . Okay, I'm not exactly a Java programmer so I'm a little intimidated. I do however have Android SDK going on my laptop.
Some more searching revealed the KDZ_FW_UPD.exe flashing method. I got the right KDZ file for my Koodo phone, V10V_00.kdz and began the process. Everything checks out, good to go, started update. Wait, phone not found? WTF! My laptop recognizes it, says my phone is connected and working. No problems here, just can't find it? UGH.
So, I need someone to either give me info on getting it to flash the kdz, or get Cyanogen Mod 7 working properly on my device.
Please help, I'll fully admit I'm a noob to this, and not an expert programmer either. But, I know computers and I fully understand what I have done so far to my phone. Just not enough to fix it.

Okay, I have gotten some things working on my phone. I think I am settling into Cyanogen Mod nicely. I missed the Google apps flash zip so I have my market and stuff. Its a shame the data does not work though. Oh well I will keep updating as it gets developed.
Sent from my LG-P500 using XDA App

GOT IT! finally...
Finally got my phone recovered to OEM specs. I had to restore my computer back to before I installed all my drivers and reinstalled all my USB drivers from there. Phone connected to USB properly, ran the KDZ updater, and it sucessfully installed the V10V kdz. All is well.

finally good luck.. enjoy androiding..

When you flashed the cyanogen mod rom what program did you use to flash the phone? And how did you make a rom backup? When you reflashed the stock rom did it still have all the original bloatware?

LG Optimus P500h TELUS became dead during Upgrading
Hi everybody!
I have LG Optimus P500h Telus. I purchased from Kijiji. I don't have any papers or documents for that so i cannot claim its warranty.
I was trying to upgrade its version during upgrading my device was stuck so I disconnected and plugged out its battery and inserted again. When i tried to turn it on. It never turned on again. It never ever appeared emergency mode again. I tried for several times by pushing home, power, and volume up and down buttons, and escape buttons. Now its just like dead. It never showed any sign of life. If anybody have any idea what happened with it and how I can recover or where I should take this one for repairs. I am in toronto, canada.
Your help and suggestions will be appreciated.

HELP!
http://forums.androidcentral.com/t-lg-phoenix-thrive/127858-jobans-kernel-2-08-overclock-cm7-2-3-7-etc-gyro-fixed-60.html
My problem starts from post #600
Please.

Related

[Q] Huawei Ascend 2 - UsCellular - Bricked

So I put the wrong firmware on my phone on accident... Put the cricket firmware on my USCellular device and well its bricked.. It works, but I have no cell service, nothing. All I have is the phone that works, but no cell service at all..
So any thoughts?
Just a shameless bump for any help on this or if anyone knows how to fix it, I would greatly appreciate it.
cant you just put the correct firmware on considering the phone powers on and works? Its not really bricked considering it turns on and loads up and everything.
That's the whole thing, I don't have the firmware to place on the phone to update it. That's why its bricked right now.
So I just took it to the store, and they flashed it back to the 2.3.5 uscellular firmware and everything is fine now. Now to find an actual method of rooting this phone so that it still works
TheCox said:
So I just took it to the store, and they flashed it back to the 2.3.5 uscellular firmware and everything is fine now. Now to find an actual method of rooting this phone so that it still works
Click to expand...
Click to collapse
So they were able to flash the phone back to the original firmware??
I have a similar situation with my S2...it thinks its an at&t phone lol
the US Cellular Ascend 2 can be rooted with SDK and Super One Click. just download both programs, open SDK and let it it run in the background, open Super One Click, plug your phone in and hit root... it's that easy.
i just put Playful God's cm7 port on mine this past weekend. had to download GoSMS Pro to be able to receive MMS messages, and the play store thinks my phone is a Cricket phone. but, data, voice, and text work perfectly.
it's kinda strange though, you have to do a complete wipe before installing cm7 so you loose everything. well, i backed up my contacts usin the my contacts backup app from US Cellular, when i tried to download the app from the market using my phone, it said that it wasn't available for my carrier (remember, the market thinks mine is a cricket A2) but when i sent it to my phone via website from my home PC, it downloaded and worked great...

Totally bricked!!

Hi guys,
Well it just happened the unwanted.
After an unsuccessful upgrade to 20E I'm left with a bricked phone.
My phone is an European version (p920). I've tried all procedure described on this forum about how to get him back to live but all ended into a failure. The bin methode gave a partial "success" but at the end it made things worst cause it messed up my baseband and now it doesn't have a GSM network and there's no IMEI.
Well I tell you how all these happend.
A couple a days ago I was having 21A installed which I ended up rooting it in order to try some custom roms. I have tried a couple of them but at the end I was having some troubles with my wifi connection so I decided to revert back to 21A or just install another once using the kdz update method.
It was while upgrading to 21D that I got a connection fault and I had to detach and attach the phone. First I though it would be a cable though I changed it and I started all over with the provided cable from LG but always with the same results. As a result the phone didn't power up. I founded later that it powers up only when the wall charger is attached.
After many tries and after reading how to solve this issue I gave it a try trough flashtool with a bin file of 20E I downloaded here in the forum. I tried several times but after 95 seconds the upgrade just fail, well it never really got further. I also tried to flash a GB baseband and I remember once it got up untill 75 seconds of progress and the I got and ERROR. I remember the same happened when the first leaked GB rom came out and you had to flash the baseband separately using these method.
I can't get the phone into recovery mode. I ran out of button combination don't work. I read that some other people were having the same issue and they haven't found a fix yet.
Sorry for the large story but I wanted to be clear with it.
Can someone point me out how to solve this or just come with some ideas.
I really thank you in advance
Lucio
Have you tried this method?
http://forum.xda-developers.com/showthread.php?t=1186460
It worked for me for about 3 different types of bricking, even though it's very tricky and frustrating to get it to enter emergency mode correctly. However, when it does, it feels like a better way to flash a rom in my opinion. I prefer this method when installing a new rom.
Using V20E in mine right now.
Works just fine.
download this
http://forum.xda-developers.com/attachment.php?attachmentid=887870&d=1328537753
if your phone doesnt start put it in download mode like Trekfan422991 does in here
and then just watch this video i have uploaded the procedure here
xbsall said:
Using V20E in mine right now.
Works just fine.
download this
http://forum.xda-developers.com/attachment.php?attachmentid=887870&d=1328537753
if your phone doesnt start put it in download mode like Trekfan422991 does in here
and then just watch this video i have uploaded the procedure here
Click to expand...
Click to collapse
HI XBALL,
Thanks for the links man. I was using old driver and that was causing the constantly connection failure. I download the new USB driver trough the LG Updater app ( Recovery Phone) and installed them. I disabled the LG Android USB moden and started the upgrade procedure with a full success.
I've crazy for about three days. Now time for a bier.
Thanks

[q] major screw up. Helpppp!!!

So I originally rooted my S3 using odin and a stock verizon software followed by using ez bootload unlock, ez recovery, and clockwork mod. I used the custom rom cyanogen mod, and eventually continued to update those roms when they rolled out the OTA updates. When the latest update came out on the 18th I noticed an issue with my contacts. Due to this I reverted to the 16th rom, but something went terribly wrong. At this time I tried re-rooting, tried different types of rooting and got my device working along with my contacts back, but it rendered my sim card useless. I tried everything I could find on the internet. I finally covered my tracks and took it to the verizon store. They replace the sim card, but it still didn't work. They replaced my device, and me being dumb I rooted it again. Same original rooting that worked the first time. It worked at first, but then the same issue occurred. I'm not sure what to do, I can't go back to verizon again. They will expect something this time. It makes no sense. The hardware is not an issue, there is some data error somewhere. PLEASE HELP!!!
TLDR; Crazy weird data issue maybe? Whoever can solve this will be the House of Android rooting.
a.p.mahaney said:
So I originally rooted my S3 using odin and a stock verizon software followed by using ez bootload unlock, ez recovery, and clockwork mod. I used the custom rom cyanogen mod, and eventually continued to update those roms when they rolled out the OTA updates. When the latest update came out on the 18th I noticed an issue with my contacts. Due to this I reverted to the 16th rom, but something went terribly wrong. At this time I tried re-rooting, tried different types of rooting and got my device working along with my contacts back, but it rendered my sim card useless. I tried everything I could find on the internet. I finally covered my tracks and took it to the verizon store. They replace the sim card, but it still didn't work. They replaced my device, and me being dumb I rooted it again. Same original rooting that worked the first time. It worked at first, but then the same issue occurred. I'm not sure what to do, I can't go back to verizon again. They will expect something this time. It makes no sense. The hardware is not an issue, there is some data error somewhere. PLEASE HELP!!!
TLDR; Crazy weird data issue maybe? Whoever can solve this will be the House of Android rooting.
Click to expand...
Click to collapse
Why don't you try to Odin a pre-rooted Verizon stock can be found here http://forum.xda-developers.com/showthread.php?t=1984436 to see if it addressed both our your issues?
I just had some major issues with this as well. There is something wrong with the nightly versions of CM 10.1.
Like you - I flashed CM 10.1 12/18 and found that my data was not working. I then searched this forum and found that other users were having the no data issue as well. I decided that I would do the same and flash back to an earlier CM 10 release from December, but the update did not go as expected. Due to going 10.1 to 10 I had to wipe data/cache/dalvik. At this point I got CM 10 reinstalled, but the phone came up with NO cell coverage. I went to System Settings -> About -> Status and found that the phone was no longer registering my cellular network (Verizon) or phone number. My IMEI data was dead.
Luckily in my case I had already made backups of my IMEI data per this post: http://forum.xda-developers.com/showthread.php?t=1852255
I restored my IMEI and reflashed CM 10 12/16. Everything is now working as expected. Your issue sounds identical to mine - I just spent half the day fighting with the exact same issue. I definitely learned my lesson about staying so current with the NIGHTLY builds for day-to-day non-dev use. I knew it before, it just never bit me like this.
Anyways, I hope this information helps you somewhat. Good luck!
a.p.mahaney said:
So I originally rooted my S3 using odin and a stock verizon software followed by using ez bootload unlock, ez recovery, and clockwork mod. I used the custom rom cyanogen mod, and eventually continued to update those roms when they rolled out the OTA updates. When the latest update came out on the 18th I noticed an issue with my contacts. Due to this I reverted to the 16th rom, but something went terribly wrong. At this time I tried re-rooting, tried different types of rooting and got my device working along with my contacts back, but it rendered my sim card useless. I tried everything I could find on the internet. I finally covered my tracks and took it to the verizon store. They replace the sim card, but it still didn't work. They replaced my device, and me being dumb I rooted it again. Same original rooting that worked the first time. It worked at first, but then the same issue occurred. I'm not sure what to do, I can't go back to verizon again. They will expect something this time. It makes no sense. The hardware is not an issue, there is some data error somewhere. PLEASE HELP!!!
TLDR; Crazy weird data issue maybe? Whoever can solve this will be the House of Android rooting.
Click to expand...
Click to collapse
You most likely lost you imei/min or something, you can check in settings>about phone>status. Easy way to correct it is to flash a older stock ICS image and use the reprovision code. Flash this in odin then type this in the dialer *2767*3855# and that should fix ya back up. Flashing anything carries a risk of dropping your imei but it happens much more on AOSP roms.

[Q] need help please. can't grt phone to activare still

I got my one SV k2_cl from boost a little over a month ago and got the bootloader unlocked and rooted, working fine until one morning it wouldn'tmake calls or texts. I tried to factory reset and when I tried to boot got stuck at the HTC logo. Took me 2 weeks to get it to even flash a Rom on here that will somewhat work. I've got WiFi and partial 3g 4g connectivity but no voice at all. When I try to use the phones its activation tool-error, tried manually programming phone- nothing. I'm stumped. Can someone please help me out here. Don't want to have to buy another phone if I can help it. The only guess I've got at the moment is that if I could get a stock original rom to flash I'd be good to go probably and just hold out on doing anything else to it until after the kitkat ota is launched. The few stock roms I've tried either wouldn't download for some reason or just won't flash right. Thanks in advance for any help guys. I've always been more of a hardware geek more so than software but I can usually muddle through following guides of course.
I'm not much into boost, but did you try to flash the available RUU?
help...
As a matter of fact I have tried that and unfortunetly the installer locked up on a reboot of the phone because the phone wants to do the "Android is upgrading # of #" on every boot. That was why I was thinking since adb/fastboot and the HTC One Toolkit all sorta work that if I could get ahold of a working stock rom to flash on there and I have a stock CWM backup still on my laptop from when I first got the phone rooted and everything working. But of course thanks for the tip anyway. I wish that would work. It seems to be the easiest way to install back to stock.

Serious Issues (Phone Un-Usable)

Here's my situation. I got an LG G2 (D800) for my birthday last December. I was super excited to finally have an Android phone again, I had been using an iPhone 4S for a few months, so naturally I went straight into customization. I tried to flash a ROM (I don't remember which one) got loki set up right, installed TWRP. Got all that done. Selected my ROM, which had versions for different carriers(D800,D801,D802) kernels included. So I accidentally flashed the D802 ROM onto my D800,(In system settings it identifies as a D802). Now I didn't think to flash the kernel for it... I think that may be my problem. Now in me head I can just boot back into recovery, flash the right ROM and kernel, and I'm good to go. Not so much.. For some reason, TWRP was removed. I also cannot barely navigate anything. My touches are off and completely random, it will auto reboot after about 1-5 minutes of use. I have tried to get into system settings countless times and turn on USB debugging to try to get loki and TWRP back in it. But the touches are so off and inaccurate that I cannot even click on PC Connections to turn it on. I am at a ****ing wall. I have no earthly idea as to what I can do... At the moment I have no phone to use, I need one for my job. I beg for any help or advice, I will try anything at this point.
Thanks.
Please do tell me if you think its hopeless, I can take brutal honesty.
LG G2 Bricked Phone Fix :This Works !!
Villisca23 said:
Here's my situation. I got an LG G2 (D800) for my birthday last December. I was super excited to finally have an Android phone again, I had been using an iPhone 4S for a few months, so naturally I went straight into customization. I tried to flash a ROM (I don't remember which one) got loki set up right, installed TWRP. Got all that done. Selected my ROM, which had versions for different carriers(D800,D801,D802) kernels included. So I accidentally flashed the D802 ROM onto my D800,(In system settings it identifies as a D802). Now I didn't think to flash the kernel for it... I think that may be my problem. Now in me head I can just boot back into recovery, flash the right ROM and kernel, and I'm good to go. Not so much.. For some reason, TWRP was removed. I also cannot barely navigate anything. My touches are off and completely random, it will auto reboot after about 1-5 minutes of use. I have tried to get into system settings countless times and turn on USB debugging to try to get loki and TWRP back in it. But the touches are so off and inaccurate that I cannot even click on PC Connections to turn it on. I am at a ****ing wall. I have no earthly idea as to what I can do... At the moment I have no phone to use, I need one for my job. I beg for any help or advice, I will try anything at this point.
Thanks.
Click to expand...
Click to collapse
take your phone to a metro pc store or a cricket wireles store pay to have it flashed to their service then flash it back as you normally would the jtag machine they use can fix all models every cell phone store has one but good luck getting the major 4 to flash it Sprint , AT&T, Verizon, T-Mobile, thats why i said Metro PCS Or Cricket Wireless, it worked for me cause you cant get anyone to respond on here and youtube is full of liars that wanna brick your phone on purpose. I had a LG G2 D800 That i Accidently wiped everything including os and sd card with all Files of roms root the whole 9 yards
so all i had was Just Clockwork mod !! took it to the METRO PCS store and paid as if i was wanting their service they flashed it and Boom working Again, then took it home IORooted it with that Method found on here and flashed G2 Stock rom using G2 flash tool. Then flashed it again from TRWP Using G3 cloudy Rom. I hope this helps
Isn't metro pcs a cdma network?? Will flashing a gsm phone (att d800) to cdma even work??
Sent from my LG-D800 using XDA Free mobile app
shadow2483 said:
take your phone to a metro pc store or a cricket wireles store pay to have it flashed to their service then flash it back as you normally would the jtag machine they use can fix all models every cell phone store has one but good luck getting the major 4 to flash it Sprint , AT&T, Verizon, T-Mobile, thats why i said Metro PCS Or Cricket Wireless, it worked for me cause you cant get anyone to respond on here and youtube is full of liars that wanna brick your phone on purpose. I had a LG G2 D800 That i Accidently wiped everything including os and sd card with all Files of roms root the whole 9 yards
so all i had was Just Clockwork mod !! took it to the METRO PCS store and paid as if i was wanting their service they flashed it and Boom working Again, then took it home IORooted it with that Method found on here and flashed G2 Stock rom using G2 flash tool. Then flashed it again from TRWP Using G3 cloudy Rom. I hope this helps
Click to expand...
Click to collapse
Okay, thank you. About how much did it cost you? Also, since I have my phone locked to AT&T wouldn't they make it so only their SIM cards work in the phone, making my AT&T SIM worthless? I like AT&T's service, I don't want to drop them.
LG G2 D800 AT&T Metro PCS / Cricket Wireless
Villisca23 said:
Okay, thank you. About how much did it cost you? Also, since I have my phone locked to AT&T wouldn't they make it so only their SIM cards work in the phone, making my AT&T SIM worthless? I like AT&T's service, I don't want to drop them.
Click to expand...
Click to collapse
I
In response to everyones question yes they would charge you for their service but this is a last resort if you have no help from anyone on here, .. Now here the thing, As i stated in my previous reply, i did this cause i accidently wiped my whole phone and only had just CWM aka clock work mod that was it and nobody has done a tutorial on this a fix or nothing for this model i had no way to adb push or sideload cause it couldnt recognize the model to push or latch on to my device. so I took it to my friend at the local Metro PCS store and told them i want service and I paid for their service they flashed it i took it home flashed IoRooted it , then G2 Flashed it to AT&T Stock rom, once back on my stock rom i then Used TWRP and made a full back up using TWRP and flashed the G3 Cloudy Rom , then Boom I was back in the saddle again !! , now I really hope that the XDA Developers could take a moment if they could to find a fix for people like me and anyone else who accidently wipes everything Toatl Os and all even SD and external and the only thing they have is CWM or TWRP, . but the fix would make it so we couldnt erase all data without being warned or some type of emergency fix or patch for this sorta thing, im just a noob but I respect everyone on the site and their work and they are good at what they do , so if the message reaches one of the master Pros id be gratefully appreciative , and im sure all others will as well , sorry for the late response ive been working 3rd shift and not much sleep. hope i answered all your questions , have a great day
---------- Post added at 10:45 AM ---------- Previous post was at 10:39 AM ----------
shadow2483 said:
I
In response to everyones question yes they would charge you for their service but this is a last resort if you have no help from anyone on here, .. Now here the thing, As i stated in my previous reply, i did this cause i accidently wiped my whole phone and only had just CWM aka clock work mod that was it and nobody has done a tutorial on this a fix or nothing for this model i had no way to adb push or sideload cause it couldnt recognize the model to push or latch on to my device. so I took it to my friend at the local Metro PCS store and told them i want service and I paid for their service they flashed it i took it home flashed IoRooted it , then G2 Flashed it to AT&T Stock rom, once back on my stock rom i then Used TWRP and made a full back up using TWRP and flashed the G3 Cloudy Rom , then Boom I was back in the saddle again !! , now I really hope that the XDA Developers could take a moment if they could to find a fix for people like me and anyone else who accidently wipes everything Toatl Os and all even SD and external and the only thing they have is CWM or TWRP, . but the fix would make it so we couldnt erase all data without being warned or some type of emergency fix or patch for this sorta thing, im just a noob but I respect everyone on the site and their work and they are good at what they do , so if the message reaches one of the master Pros id be gratefully appreciative , and im sure all others will as well , sorry for the late response ive been working 3rd shift and not much sleep. hope i answered all your questions , have a great day
Click to expand...
Click to collapse
To my Understanding I was told at the Metro PCS that it is owned now by AT&T as well as Cricket , but don't quote me , but I do know that their stores have Sim Cards now instead of just CDMA only .
Here is the best possible fix I could think of for you, and it is guaranteed to work because I've softbricked my D800 in many different circumstances trying to play around with options and settings I shouldn't have just to see what they were. This process is somewhat tedious, but nonetheless is works and will reset your device back to the absolute first rom ever released for the D800, which is 4.2.2 JB. After you are completely done with this, you can go to your settings>about phone>software update and keep updating it until you get to 4.4.2 KK. I think you have to do the software update 4 times to get to 4.4.2 so it might take a little time. Here is the video, follow it step by step and if you have any questions just post them here. https://www.youtube.com/watch?v=kqw_LFuyHbE&index=1&list=FLgk5eWpB4S7cI8MUlrRa67A

Categories

Resources