Using RSD Lite 6.16 to flash VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml on my XT926.
All files download from links in HouseOfMoto from SamuriHL. Using RSDScriptGenerator.jar.zip generated some xml file. But in RSDLite when I open any of these XML file, even the original ones, it brings out an error message:
"...please check input file. either xml format is wrong or image files associated with it are missing"
Every files are extract from the ZIP without any error. What could be wrong here? Using Windows 7 64bit. Tried to set compatibility to WinXP, no help.
xknobi said:
Using RSD Lite 6.16 to flash VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml on my XT926.
All files download from links in HouseOfMoto from SamuriHL. Using RSDScriptGenerator.jar.zip generated some xml file. But in RSDLite when I open any of these XML file, even the original ones, it brings out an error message:
"...please check input file. either xml format is wrong or image files associated with it are missing"
Every files are extract from the ZIP without any error. What could be wrong here? Using Windows 7 64bit. Tried to set compatibility to WinXP, no help.
Click to expand...
Click to collapse
well probably more useful to post in Sams thread on droidrzr.com dontcha think??
but sounds like your doing something wrong, which means you didnt read, read, and read again....
also which of Sams fine tools are you trying?
cmh714 said:
well probably more useful to post in Sams thread on droidrzr.com dontcha think??
but sounds like your doing something wrong, which means you didnt read, read, and read again....
also which of Sams fine tools are you trying?
Click to expand...
Click to collapse
Sam's site seems to be down at the moment. I did read and searched. Not much help though.
xknobi said:
Sam's site seems to be down at the moment. I did read and searched. Not much help though.
Click to expand...
Click to collapse
not sure what site you are talking about, I am a moderator where Sam is...and I am on the site all the time...
You can find Sams house here: http://www.droidrzr.com/index.php/forum/138-samurihls-house-of-moto/
cmh714 said:
not sure what site you are talking about, I am a moderator where Sam is...and I am on the site all the time...
You can find Sams house here: http://www.droidrzr.com/index.php/forum/138-samurihls-house-of-moto/
Click to expand...
Click to collapse
that's exactly the same site I visited. I always get timeout when connecting to this site. And I am refering to this thread:
http://www.droidrzr.com/index.php/topic/45494-how-to-xt926-upgrade-to-kitkat-ota
I have to access it through google cache. Before weeks I was able to read the site without problem. And I downloaded the big VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml.zip from that thread.
xknobi said:
that's exactly the same site I visited. I always get timeout when connecting to this site. And I am refering to this thread:
http://www.droidrzr.com/index.php/topic/45494-how-to-xt926-upgrade-to-kitkat-ota
I have to access it through google cache. Before weeks I was able to read the site without problem. And I downloaded the big VZW_XT926_4.4.2-KDA20.62-10.1_CFC_1FF.xml.zip from that thread.
Click to expand...
Click to collapse
Use a different browser my friend...
Changed to another system, no error in RSD Lite, successfully flashed. And the droidrzr site access problem seems to be related to my ISP. Through another ISP I can access the site.
xknobi said:
Changed to another system, no error in RSD Lite, successfully flashed. And the droidrzr site access problem seems to be related to my ISP. Through another ISP I can access the site.
Click to expand...
Click to collapse
Glad you got it worked out!! The droidrzr.com site is down occasionally, but not that often and certainly not for very long.
Glad youre up and running
cmh714 said:
Glad you got it worked out!! The droidrzr.com site is down occasionally, but not that often and certainly not for very long.
Glad youre up and running
Click to expand...
Click to collapse
:laugh: Yeah, thanks for those who found out the new unlock/root way, it was like a cake walk.
Related
Looking for someone that could give me a backup file of a rom, stock or not that I could restore to, to possibly fix my problem in my other post
http://forum.xda-developers.com/showthread.php?t=1289265
Need a flash-able zip file, for recovery..
Anyone?
I think this should help you. It's not necessary to apply any tweaks, just follow the steps until you get a flashable ZIP.
Ianis G. Vasilev said:
I think this should help you. It's not necessary to apply any tweaks, just follow the steps until you get a flashable ZIP.
Click to expand...
Click to collapse
Thanks!
But I'm stumped at the first part..
http ://csmg.lgmobile.com:9002/csmg/b2c/client/ezlooks_model_list.jsp?model=LGP505
^I put that in and get nothing back.
Would you be able to help me with this? I'm a noob at it, but not an idiot..
Xery said:
Thanks!
But I'm stumped at the first part..
http ://csmg.lgmobile.com:9002/csmg/b2c/client/ezlooks_model_list.jsp?model=LGP505
^I put that in and get nothing back.
Would you be able to help me with this? I'm a noob at it, but not an idiot..
Click to expand...
Click to collapse
You may want to just use the tool that finds the firmware for you.
MechanicaIMan said:
You may want to just use the tool that finds the firmware for you.
Click to expand...
Click to collapse
I tried it out, It's not working.. The buttons arent working. They're blank.
I know I can fix my phone easily, just need someone to help! :c
It's not bricked or anything just stuck in cwr:/
Xery said:
I tried it out, It's not working.. The buttons arent working. They're blank./
Click to expand...
Click to collapse
Do you have .NET 4 installed? It should work fine. Read through the thread if you're having trouble with the program.
You could also find the firmware yourself by following the instructions under "How to get stock FW." It requires a P505 serial number, so I can't do it for you.
MechanicaIMan said:
Do you have .NET 4 installed? It should work fine. Read through the thread if you're having trouble with the program.
You could also find the firmware yourself by following the instructions under "How to get stock FW." It requires a P505 serial number, so I can't do it for you.
Click to expand...
Click to collapse
Yes, just installed .n4 and rebooted pc before I ran it.
I tried the model and S/N method and that didn't work either.
Unless I'm doing something wrong? I put the model where it told me too, and the s/n from my phone behind my battery where it said, and view page source. d
Xery said:
I tried the model and S/N method and that didn't work either.
Unless I'm doing something wrong? I put the model where it told me too, and the s/n from my phone behind my battery where it said, and view page source. d
Click to expand...
Click to collapse
On your phone behind the battery, the number you need will be listed as the IMEI. Use that instead of the number shown as the S/N. Append the number to the end of this link:
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=
MechanicaIMan said:
On your phone behind the battery, the number you need will be listed as the IMEI. Use that instead of the number shown as the S/N. Append the number to the end of this link:
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=
Click to expand...
Click to collapse
Thanks that's very helpful info.
Know What To Do!
Install a v10e kdz file on it, youll get weird colors, dont do nothing, use lg mobile support tool and update, worked fine, using 2.3 on p505, rooted with superoneclick and having official .35 kernel, FLASH OLD BB RECOVERY!
Ive tried everything on this forum and no luck the down grade didnt work and root tool kit isnt working. Ik im a noob but i have been on xda forums for a while (just got an account today) if anybody can give me step by step personal instructions or help would appreciate your help or anything would do p.s please dont hate post on this
I hate cats!
even about cats
more info would be super usefull such as build number, serial number ect
???
What type of a new app do you think they would make!?
Assdikes said:
What type of a new app do you think they would make!?
Click to expand...
Click to collapse
Haha, I think he's talking about rooting after updated to the latest version.
Updating razorclaw isn't as easy as you may think. A new exploit likely needs to be found which takes a lot more problem solving.
yes. I have the reacent ota update and i have the B90 version unfortunately i have an old xp so most of the ideas giving to me have been unhelp full :/
build number 8.6.5.21 US serial number b90KAS048969
Fat guy142 said:
yes. I have the reacent ota update and i have the B90 version unfortunately i have an old xp so most of the ideas giving to me have been unhelp full :/
Click to expand...
Click to collapse
There's a thread in the dev section show how to downgrade firmware and root. You don't even need a PC,
You could download all necessary files straight to the tablet.
weehooherod2 said:
Updating razorclaw isn't as easy as you may think. A new exploit likely needs to be found which takes a lot more problem solving.
Click to expand...
Click to collapse
Yeah i understand i just wish some of the alternitives would work productivly. I tried the root tool kit but nvidia download driver wouldnt work for some reason even though i was signed in as administrator ( windows xp)
also if anyone has anyway to super dumb down the downgrade to help me maybe understand what i am doing wrong i have my micro sd card in (fat32) and i place the zip for the update on root of micro card i reboot and no triangle :/
baseballfanz said:
There's a thread in the dev section show how to downgrade firmware and root. You don't even need a PC,
You could download all necessary files straight to the tablet.
Click to expand...
Click to collapse
link pleas, ill try but most seem not to work. P. S remember i have us version idk but in fact that might be my issue. Please post link for us 8.6.5.21
seriously dude? http://forum.xda-developers.com/showthread.php?t=1417006
and the reason the nvidia stuff didnt work is because you have a b90 which has sbk 2 which is not compatible with nvflash
try to take a look at this tread
http://forum.xda-developers.com/showthread.php?t=1427838
it solved my "problem" ... hope it will help you too
pippo_73 said:
try to take a look at this tread
http://forum.xda-developers.com/showthread.php?t=1427838
it solved my "problem" ... hope it will help you too
Click to expand...
Click to collapse
Hey thanks that looks really legit but i dont understand the intructions (if there are any) ik i am probably going to regret asking and feel stupid but can you give me Step by Step noob instructions
Fat guy142 said:
Hey thanks that looks really legit but i dont understand the intructions (if there are any) ik i am probably going to regret asking and feel stupid but can you give me Step by Step noob instructions
Click to expand...
Click to collapse
downloads and instructions are here http://www.androidpolice.com/2012/01...west-firmware/
mrevankyle said:
downloads and instructions are here http://www.androidpolice.com/2012/01...west-firmware/
Click to expand...
Click to collapse
those are not specific...... like where do i put the 2 downloads
Fat guy142 said:
those are not specific...... like where do i put the 2 downloads
Click to expand...
Click to collapse
First you must have ADB setup.
Good tutorial here for that.
http://forum.xda-developers.com/showthread.php?t=1071584&highlight=adb+setup
The two files that you download goes in the in platform tools folder
Might look something like this or similar depending on how you install it on your PC
C:/android-sdk/platform-tools
Open up command window and type in the command lines
following the post
baseballfanz said:
First you must have ADB setup.
Good tutorial here for that.
http://forum.xda-developers.com/showthread.php?t=1071584&highlight=adb+setup
The two files that you download goes in the in platform tools folder
Might look something like this or similar depending on how you install it on your PC
C:/android-sdk/platform-tools
Open up command window and type in the command lines
following the post
Click to expand...
Click to collapse
Thanks at least you where more helpful and non-judge full unlike mrevankyle will report back in a doy or so on if it works Thank you everyone.
I have flashed the official ICS.bin but for some reason i am not getting any network signal. Can anybody help with this or had this problem? should i flash another baseband? Maybe the V30b baseband will work?
plus im not being able to root the phone. i tried to install the flashable zip by OS_Hacking but no luck even though it says its flashed and the adb_restore method is not working for me either. Help please
do you have IMEI:
*#06#
p-vlad said:
do you have IMEI:
*#06#
Click to expand...
Click to collapse
just checked that, shows as null. i guess i need to put the imei to get network?
naz86 said:
just checked that, shows as null. i guess i need to put the imei to get network?
Click to expand...
Click to collapse
yes. flash the KDZ version. look around the forum to see how.
p-vlad said:
yes. flash the KDZ version. look around the forum to see how.
Click to expand...
Click to collapse
ive tried the KDZ version, im unable to do that because im running windows 7 and the progam continually crashes, on 1 of the posts it says you have to run it on windows xp. i guess i could try 1 of the other tutorials to restore imei couldnt i?
naz86 said:
ive tried the KDZ version, im unable to do that because im running windows 7 and the progam continually crashes, on 1 of the posts it says you have to run it on windows xp. i guess i could try 1 of the other tutorials to restore imei couldnt i?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33958426&postcount=4
naz86 said:
ive tried the KDZ version, im unable to do that because im running windows 7 and the progam continually crashes, on 1 of the posts it says you have to run it on windows xp. i guess i could try 1 of the other tutorials to restore imei couldnt i?
Click to expand...
Click to collapse
Use this guide which is sticky post in the dev section:
http://forum.xda-developers.com/showthread.php?t=1540163
It always worked for me and definitely works for flashing the stock ICS v28b no matter your Windows version.
Perform a factory reset and it will work...
Sent from my LG-P920 using xda app-developers app
greenbat said:
Perform a factory reset and it will work...
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
i've tried that and it doesn't seem to work. I've tried the methods to flash the KDZ but when the LG update program runs it always seems to download another update rather than use the V28B KDZ. Im at my wits end with this phone!
I say you try flashing the KDZ, but you're not guaranteed to get network working as I currently wasn't able to get mine working but everyone else seems to be doing fine by flashing the KDZ. I requested help, but no one has replied.
Remove all LG drivers and all LG software and start from scratch. I've done it through Windows 7 many times in the past and yesterday tried on Windows 8, with a few issues here and there, I finally got it. If you need help or get stuck just P.M. me so I can run you through it. Maybe the KDZ will work for you even though it didn't work for me.
The easiest way of course is to use LG flash tool on XP and you'll get rid of any problem
just follow this instruction
so many questions like this already in this thread.. and really got sicked of it.
please,just do a read..
bounce606 said:
The easiest way of course is to use LG flash tool on XP and you'll get rid of any problem
just follow this instruction
so many questions like this already in this thread.. and really got sicked of it.
please,just do a read..
Click to expand...
Click to collapse
It's 2013 and many people have strayed away from using an old OS like XP, suggesting to use it is not any help to anyone.
If you're sick of it don't come around. I've had my share of issues where quite a few people have helped me around here. That's what the community is for. I've personally read and followed everything to the dot, and still I don't have any network just like the OP. If the answer's around here then lead me to it, because I must not be reading correctly.
naz86 said:
i've tried that and it doesn't seem to work. I've tried the methods to flash the KDZ but when the LG update program runs it always seems to download another update rather than use the V28B KDZ. Im at my wits end with this phone!
Click to expand...
Click to collapse
If the LG update downloads another update instead of using the v28b.kdz then you've probably didn't setup the http server and the hosts file correctly.
Check the link to the guide I posted on the first page and make sure you follow all its steps.
to everybody who is trying to help resolve this issue it is very much appreciated. Nobody likes to run into problems when flashing etc but like one of the other members posted thats what this community is for. I might try get hold of a machine or laptop running XP or create a partition and install it on my laptop and see if thats work but before i do that i will give the server method a try again from the beginning and see if that works. Thanks people and i'll report back on what i do and if it works
look at link in my post before. work for win7 too
just download xbsall rooted v28b zip and flash with lg flash tool and if your on windows 7 make sure you run lg flash tool in xp sp3 compataility mode it should work for you then.
here is the link for downloads read carefully before flashing http://forum.xda-developers.com/showthread.php?t=1963847
I'm with the same problem. I changed baseband and I did not succeed ...
Sent from my LG-P920 using xda app-developers app
yehison said:
I'm with the same problem. I changed baseband and I did not succeed ...
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
try what i wrote in last post
oblivion786 said:
try what i wrote in last post
Click to expand...
Click to collapse
i haven't tried flashtool in xp mode so i'll give that try when i get back from work. Hopefully it works
I get the wrong busybox error. I have read several posts about the MB865 and reflashing the stock ATT ICS, but what should I do to fix the error on the ME865? Thanks.
jeffelzy said:
I get the wrong busybox error. I have read several posts about the MB865 and reflashing the stock ATT ICS, but what should I do to fix the error on the ME865? Thanks.
Click to expand...
Click to collapse
The solution is the same but with a different FXZ.
Thanks. I assume I should use Asian, since mine is Asian model?
jeffelzy said:
Thanks. I assume I should use Chinese, since mine is Chinese model?
Click to expand...
Click to collapse
Never mind. I just matched with my phone. Thanks again.
Blur_Version.67.220.3.ME865.Retail.en.05
Ok, so I downloaded my firmware (67.220.3.ME865.Retail.en.05) from here, http://sbf.droid-developers.org/phone.php?device=17, and it is in tar.gz format. I can extract the files, run RSD Lite choosing "default_flash.xml", in RSD Lite it shows the whole process as being completed, but zero changes are made. I have yet to fin anything in zip format, if it matters. As a noob I assume i am still doing something wrong. So, for now I just flashed the ATT 67.21.125.MB865.ATT.en.us to it to get CM11 on. It worked fine with no issues. Currently setup as multiboot.
FYI I've read all of the guides and also searched in different forums. I can't seem to flash back to stock. I"ve updated the drivers of my computer, downloaded different tools and the end result is the same. It says flash complete 1s the turns green but the phone stays the same. Any ideas or help is welcomed.
tozymil said:
FYI I've read all of the guides and also searched in different forums. I can't seem to flash back to stock. I"ve updated the drivers of my computer, downloaded different tools and the end result is the same. It says flash complete 1s the turns green but the phone stays the same. Any ideas or help is welcomed.
Click to expand...
Click to collapse
Have you tried using fastboot to do that?
Slim K said:
Have you tried using fastboot to do that?
Click to expand...
Click to collapse
Yeah I have
tozymil said:
Yeah I have
Click to expand...
Click to collapse
Maybe you misunderstood what I meant. I meant Not using any kind of tool. I have answered the method in this thread. Use the flash_all script, if some error appears, post it here and maybe some could help you. Remember, Those tools are unofficial and highly unreliable
Slim K said:
Maybe you misunderstood what I meant. I meant Not using any kind of tool. I have answered the method in this thread. Use the flash_all script, if some error appears, post it here and maybe some could help you. Remember, Those tools are unofficial and highly unreliable
Click to expand...
Click to collapse
--erased--
Hi. Can someone help me on how to remove the error with my phone which is the process.android.com has stopped. I've tried flashing the firmware but it can't be completed. I cannot go to the settings of the phone to instead try another solution for the error won't go away. I cannot touch any buttons. Any ideas to help me sort these things out? Any response would be highly appreciated. Thanks.