Hey Guys!
Yesterday I flashed the rom "Liberty S4 MAX".
Within the Aroma installation it has an option to flash radio (I believe v1.20) and I said yes as I thought it would work good with that rom.
After playing around a little I found that the rom didn't statisfy my needs and I flashed MagioROM.
MagioROM did statisfy my needs, BUT I noticed that my network wouldn't work when I booted up my phone.
The problem I have now:
Every time my phone boots up I can enter my PIN-Code and the phone will stay on "No Signal" (no network service).
I do have a Wi-Fi signal.
I can , however, get it to work: I open my phone and open the dialer. I type *#*#4636#*#* and it bring me to the "testing" configuration. I can click "Phone Information" and scroll down to the preferred network service. It says WCDMA Preferred which is good. I can click "Turn off radio" and than click on "Turn on radio" enter my PIN-Code again and BOOM! the network works.
The network is, however, not stable and sometimes I have to do this step again a few times while my phone is running.
How do I solve this problem?
I did try to flash a new radio. I flashed every radio in this link : http://forum.xda-developers.com/showthread.php?t=2419699
I did try another rom (ViperOneS) but still the same problem.
My Phone:
HTC One S (S4)
S-ON
HBOOT : 2.15.0000
RADIO : 1.15.50.05.29
Thanks in advance!
the same problem...
Fangir said:
the same problem...
Click to expand...
Click to collapse
I fixed it by superCID and S-OFF my phone.
it's not hard at all, give it a try.
i already have SuperCid i s-off :/
Info from Bootloader:
*** Unlocked ***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.35a.32.45.27
OpenDSP-v33.1.0.45.1128
eMMC-boot
ROM - Cyanogen 11 - 4.4.2
i've change rom to maximus - same problem :/
right now my phone is useless
Fangir said:
i already have SuperCid i s-off :/
Info from Bootloader:
*** Unlocked ***
VLE PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.16.0000
RADIO-1.35a.32.45.27
OpenDSP-v33.1.0.45.1128
eMMC-boot
ROM - Cyanogen 11 - 4.4.2
Click to expand...
Click to collapse
If you have S-OFF just flash another Radio from a .zip in CWM or TWRP
aint work with noew radio
i've clean up sim card and sim card plug space - for now it is ok
anyway - thanks for advice
Same problem.
I upgraded to hboot 2.16 (my radio was 1.20.50.05.16; I am S-off with a 11111111 CID) and can now no longer connect to my network.
When I did *#*#4636#*#*, I got WCDMA, which was wrong. But I've tried different versions of GSM (which is what I need), and none seem to work. Even on the phone info screen, it keeps saying 'GSM service: Emergency calls only'. Also after I do radio off/radio on, it asks me for my pincode, I enter that, it accepts it, but nothing changes.
I've also flashed another radio (1.35a.32.45.27), but I get the same problem (first it says WCDMA, but even when I change to GSM, it still doesn't work.)
I've ran various RUUs - none of them solve the problem.
And I have of course tried to remove and reinsert the sim-card - but nothing works.
Does anybody have any ideas about what might be wrong?
sdspieg said:
Same problem.
I upgraded to hboot 2.16 (my radio was 1.20.50.05.16; I am S-off with a 11111111 CID) and can now no longer connect to my network.
When I did *#*#4636#*#*, I got WCDMA, which was wrong. But I've tried different versions of GSM (which is what I need), and none seem to work. Even on the phone info screen, it keeps saying 'GSM service: Emergency calls only'. Also after I do radio off/radio on, it asks me for my pincode, I enter that, it accepts it, but nothing changes.
I've also flashed another radio (1.35a.32.45.27), but I get the same problem (first it says WCDMA, but even when I change to GSM, it still doesn't work.)
I've ran various RUUs - none of them solve the problem.
And I have of course tried to remove and reinsert the sim-card - but nothing works.
Does anybody have any ideas about what might be wrong?
Click to expand...
Click to collapse
I'm still stuck with this problem. and would still be grateful for any ideas about what the problem might be and (especially) how to solve it. Oh and to add to the mystery: when I put in my daughter's sim-card, it DOES automatically register without any problems. And I have already tried deleting all APNs and re-enter one based on the instructions given on the website of my provider (KPN), but I still can't get it to work,. There must be some other bizarre thing here...
Related
I rooted and rommed my own phone some time back without any problems, thanks to many excellent posts on this site. My boss kept moaning that his sensation kept crashing/hanging/behaving badly - so I told him that I would root and rom his phone, Which I have done. Problem is though there's no BT or WIFI. I have tried several variations on PG58IMG.ZIP but none even offer to carry out the upgrade. The phones CID is VODAP001 and the text from the HBOOT is as follows....
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012,17:33:34
I cannot seem to change the CID (I tired to superCID it). I'm fairly sure that it's the radio.img that needs to be updated - can anyone help me as to why this isn't happening. What PG58IMG.ZIP should I be using are there any additional locks that Vodafone have put on that I need to remove. The OS seems to work fine except no wifi or bluetooth. The ROM I installed is the AKOP milestone 6. Please help, my boss might sack me! :crying:
You would probably be better getting the phone to have S-OFF first.
You've not stated if the phone has gone through the HTCdev unlock mechanism. Although, I don't know what that achieves in comparison to full S-OFF.
EDIT:
In About Phone -> Software information what does it say r.e.:
Software Number
More -> Baseband version
dev unlocked and s-off. Sorry, I thought that was implied where I said "root and rom his phone, Which I have done"
Android version 4.0.4
baseband version 11.69A350400U_11.23.3504.07_M2
Kernel 3.0.16-gda3fdfc
[email protected]
Build Number IMM76I
mod ver aokp_pyramid_build-40
I've tried several PG%*IMG.zip files that appear to be the correct versions, but all they do is get as far as the Parsing... then returns me to the fastboot screen. Everything on the phone appears to work correctly except radio services (BT & Wifi) and the SD card won't mount on PC on USB mode, but I'm not bothered about that - if the Wifi works I can always network files onto the phone.
MrTitusG said:
I rooted and rommed my own phone some time back without any problems, thanks to many excellent posts on this site. My boss kept moaning that his sensation kept crashing/hanging/behaving badly - so I told him that I would root and rom his phone, Which I have done. Problem is though there's no BT or WIFI. I have tried several variations on PG58IMG.ZIP but none even offer to carry out the upgrade. The phones CID is VODAP001 and the text from the HBOOT is as follows....
PYRAMID PVT SHIP S-ON RL
HBOOT-1.27.0000
eMMC-boot
Jan 13 2012,17:33:34
I cannot seem to change the CID (I tired to superCID it). I'm fairly sure that it's the radio.img that needs to be updated - can anyone help me as to why this isn't happening. What PG58IMG.ZIP should I be using are there any additional locks that Vodafone have put on that I need to remove. The OS seems to work fine except no wifi or bluetooth. The ROM I installed is the AKOP milestone 6. Please help, my boss might sack me! :crying:
Click to expand...
Click to collapse
Hi,
According to your hboot,it says "S-ON" .
That is why no PG58IMG.zip will work
It seems that if you cannot see that,you should really not be playing with your boss's phone.
If you intend to carry on,look in my signature at the "Asskicker Thread "
That deals with s-on and flashing custom ROMS...
Hy,
I have an TMOUS HTC One S PJ40110, with the HBOOT - 2.15.000 and RADIO - 1.13.50.05.31 - Unlocked by HTCDev.
This cellphone is from US but is in Angola with the mobile provider UNITEL.
My problems are:
- When i flash a rom and insert the SIM card for the first time, I get HDSPA, but i receive a message like "privileges Changed", then i get stuck in 2g
- If i flash a rom like CM10 the cellphone cant connect to my Wimax router.
Just checked all apn settings and they are ok.
So, i try to S-OFF And Supercid to install an european RUU, i've followed step by step these tuturial (http://forum.xda-developers.com/showthread.php?p=26516911#post26516911), get no errors but still the CID doensn't change from T-Mob010.
Now i'm in official cm10. Sory for my poor english.
Best Regards
Someone could help please??
Can i supercid with HBOOT- 2.15.0000? i've tried several times, get no errors, but the cid doens't change.
Please need some help here
doesn't matter which hboot you are. if you're S-OFF you can do in fastboot mode "fastboot oem writecid 11111111"
I have the same problem with the cid not changing and my radio is half flashed and I cant flash an ruu untill someone finds a way to change the cid again.
Im not s-off
I'm not S-Off. The s-off thread says that i need to be superCid to S-off. But i can't get supercid.
I just keep reading threads about Stuck in 2g and can't find a way to fix this error.
I believe that this is not the radio frequencies, because when i insert a new sim card, it get's 4g like 5 seconds. then a message shows and i get stuck on 2g.
JoelEstrela said:
I'm not S-Off. The s-off thread says that i need to be superCid to S-off. But i can't get supercid.
I just keep reading threads about Stuck in 2g and can't find a way to fix this error.
I believe that this is not the radio frequencies, because when i insert a new sim card, it get's 4g like 5 seconds. then a message shows and i get stuck on 2g.
Click to expand...
Click to collapse
Do you know what the message says? Try going into the dialer and pressing *#*#4636#*#* and forcing WCDMA Only.
It's not possible to get scid, and S-off on OTA updated JB devece, the partition is WRITE-protectet . We need to wait for new metod to write s-cid.
Fanagoreca said:
It's not possible to get scid, and S-off on OTA updated JB devece, the partition is WRITE-protectet . We need to wait for new metod to write s-cid.
Click to expand...
Click to collapse
I took the JB OTA and it worked fine. Same goes for most other people. And also, the S-OFF exploit was released after the JB update.
usaff22 said:
I took the JB OTA and it worked fine. Same goes for most other people. And also, the S-OFF exploit was released after the JB update.
Click to expand...
Click to collapse
I can't get this on mine, and another people sayng "is not possible to write s-cid" , in s-off tread...
A'm goin to tray now, and will report back.
I don't know exactly the message i get, but is something like "restricted access changed".
Then i lose the signal, and get stuck on 2g.
JoelEstrela said:
I don't know exactly the message i get, but is something like "restricted access changed".
Then i lose the signal, and get stuck on 2g.
Click to expand...
Click to collapse
Have you tried the changing the network mode as I suggested? Also try reseating the SIM.
Hey everyone, My Motorola DEFY has just broken (the charging connectors in the micro USB port have completely broken, so I have got an old HTC Sensation out.
I've done S-OFF, Root, and installed CM10.1 (The latest build).
The problem is, I can't get any Unsimlock method to work..
I can use my phone without the request for the pin popping up, but otherwise I have no signal or connection.
My network is Giffgaff (UK) which uses O2 signal.
I have no connection to the network at all (for example to send messages or initiate calls/receive calls), never mind data.
I've tried the following:
Method 1 (The date showed up, so I can't unsimlock this way)
Method 2 (This one didn't work because I have 1.27 Hboot)
This method (This sort of works, I can use my phone without having to enter the network unlock pin, but I have no connection to the network).
No network connection image. This is clean CM10.1 install. S58 data has successfully cleared, but my Giffgaff sim doesn't work
Any help would be very much appreciated, thank you.
pk92 said:
Hey everyone, My Motorola DEFY has just broken (the charging connectors in the micro USB port have completely broken, so I have got an old HTC Sensation out.
I've done S-OFF, Root, and installed CM10.1 (The latest build).
The problem is, I can't get any Unsimlock method to work..
I can use my phone without the request for the pin popping up, but otherwise I have no signal or connection.
My network is Giffgaff (UK) which uses O2 signal.
I have no connection to the network at all (for example to send messages or initiate calls/receive calls), never mind data.
I've tried the following:
Method 1 (The date showed up, so I can't unsimlock this way)
Method 2 (This one didn't work because I have 1.27 Hboot)
This method (This sort of works, I can use my phone without having to enter the network unlock pin, but I have no connection to the network).
Any help would be very much appreciated, thank you.
Click to expand...
Click to collapse
You'll have to use method 2 BUT first downgrade your firmware to 1.17/18 and then flash the file. As soon as you've done that you just upgrade back to the latest firmware and voila, sim unlocked!
sy224048 said:
You'll have to use method 2 BUT first downgrade your firmware to 1.17/18 and then flash the file. As soon as you've done that you just upgrade back to the latest firmware and voila, sim unlocked!
Click to expand...
Click to collapse
That's what I tried with the 'third' method on my OP.
Install Firmware 1.17 (Firmware 1.17 Universal)
Install nbh file (PG58DIAG.nbh from here)
Install Firmware 3.32 (Firmware 3.32 Universal (Non-TMOUS))
Also tried "Firmware 3.32 unlocked hboot http://www.mediafire.com/download.php?mrynwif8cznhhvx"
I've checked the Giffgaff APN settings here and they are correct on my phone too.
Have I done anything wrong? or is there anything more I need to do?
Here's what my BL says at the moment (I've tried 3.33, didn't work :/ )
-Firmware-3.33-
PYRAMID PVT SHIP S-OFF RL
HBOOT-1.27.1100
RADIO-11.24A.3504.31_M
OpenADSP-v05.6.0.2226.00.0418
eMMC-boot​
It may not be an un-sim-lock problem, but a radio problem perhaps?
Unlocked and S-OFF Verizon Incredible 4G LTE. I unlocked it with Rumrunner's tool, flashed TWRP (from their page), and flash CM10.2. No cell service. I tried a few things like reflashing/updating radios, etc no change. I tried a PacMan ROM. Same result. Tried a Viper ROM. Same result. Then I flash the stock rooted and deodexed ROM and I still have no service. Just sits in roaming.
Here's info from my Bootloader screen:
Currently show this on bootloader:
TAMPERED
UNLOCKED
FIREBALL PVT SHIP S-OFF RL
CID-VZW_001
HBOOT-1.15.0000
RADIO-1.53.06.1009
OpenDSP-v29.1.0.45.0622
eMMC-boot
Aug 1 2012, 12:05:25
I don't care what ROM I use at this point. I'll even relock everything and put it back stock. Just want it to work. Help!
EDIT: EDIT: I have since relocked my phone and loaded up the stock RUU 2.17 Verizon ROM, per this walkthrough. Everything went smoothly. My bootloader now says "RELOCKED". Still no cell service. I tried dialing *228, but as soon as I hit call an alert pops up "A Verizon Wireless SIM card has activated your service and updated your phone's roaming capabilities." Well, still no service.... Dialing *22899 does the same thing.
(ignore my sig)
Hi all, here's my problem, any help would be greatly appreciated
I've had an M8 for about 6 months now, but in my attempt to fix the sim slot (hardware issue) I destroyed the ZIF connector for the screen display (DOH!). The M8 has been one of my favorite phones so far, so I just ordered a new(ish) one from SoonerSoft on ebay. Unfortunately, now that it's arrived, it refuses to recognize my MetroPCS sim card. I get no status bar icon, but when I reboot the device I get an error message that says "Non-Verizon Sim" and I have NO SERVICE WHATSOEVER. From what I've read, this device should be factory SIM unlocked but I have no talk, no text, no data connection. I've been going round and round in circles trying to resolve the issue on my own so I figured I would reach out for some help.
Here are the fixes I've already attempted:
Flashed TWRP and CMod 13
Flashed back to stock KitKat with RUU method
Attempted SIEEMPI SimUnlock method
Manually changed my CID to SuperCID (11111111)
Now that I've done RUU, I can't flash another ROM, and I'm unwilling to S-ON again in case I end up with a non-updatable version of KitKat 1.55.
Note: When I go into data settings, it will not let me select any GSM only networks as my Preferred Network, and I can't access any GSM Settings either in the data menu or the call menu. The phone doesn't even recognize the SIM as a MetroPCS chip. Please help!
Device Info:
M_WLV PVT SHIP S-OFF
CID-11111111
HBOOT-3.16.0.0000
RADIO-0.89.20.0321
OpenDSP-v38.2.2-00542-M8974.0311
OS-1.55.605.2
eMMC-boot 2048MB
Apr 1 2014,00:26:53.0
EDIT: Just FYI, my old VZW M8 had no problem recognizing the sim card, I just couldn't maintain contact between the pins and the sim for very long.
Having the same issue with my Verizon M8. Sim is not detected, tried many methods found on the internet and here on xda as well, but no luck.