Hey All
Since I'm on a locked boot loader NC1 or ML1 shouldn't matter .. can i install a 4.4.4 or 4.4 rom ? i know i would have to do it thru safestrap but would it be possible ? i thought i could only flash 4.3 touchwiz nothing higher ?
Any help would be nice
Thanks
jcbjoe said:
Hey All
Since I'm on a locked boot loader NC1 or ML1 shouldn't matter .. can i install a 4.4.4 or 4.4 rom ? i know i would have to do it thru safestrap but would it be possible ? i thought i could only flash 4.3 touchwiz nothing higher ?
Any help would be nice
Thanks
Click to expand...
Click to collapse
No, you cannot flash a 4.4.4 or 4.4 ROM. If you are on 4.3 NC1 or ML1, you are restricted to running only 4.3 touchwiz based ROMs through safestrap. Ever since the 4.3 ML1 update, different components of the phone (kernel, bootloader, etc.) are signed with a key which must match in order for the phone to boot up. That is why you are restricted to 4.3 touchwiz ROMs in safestrap. They have to be able to run off the 4.3 stock kernel. A 4.4 touchwiz ROM will not have the same key signature verification as a 4.3 touchwiz ROM. And you are definitely not capable of running any kind of AOSP ROM now that your bootloader is locked.
landshark68 said:
No, you cannot flash a 4.4.4 or 4.4 ROM. If you are on 4.3 NC1 or ML1, you are restricted to running only 4.3 touchwiz based ROMs through safestrap. Ever since the 4.3 ML1 update, different components of the phone (kernel, bootloader, etc.) are signed with a key which must match in order for the phone to boot up. That is why you are restricted to 4.3 touchwiz ROMs in safestrap. They have to be able to run off the 4.3 stock kernel. A 4.4 touchwiz ROM will not have the same key signature verification as a 4.3 touchwiz ROM. And you are definitely not capable of running any kind of AOSP ROM now that your bootloader is locked.
Click to expand...
Click to collapse
Thanks for that reply I needed it.. Next question is why are there services out there that can downgrade the NC1 OR ML1 baseband? They could be scams but I'm just wondering.. Is it just the fact that a device or hacker hasn't found the correct exploit?
Thanks
jcbjoe said:
Thanks for that reply I needed it.. Next question is why are there services out there that can downgrade the NC1 OR ML1 baseband? They could be scams but I'm just wondering.. Is it just the fact that a device or hacker hasn't found the correct exploit?
Thanks
Click to expand...
Click to collapse
You are limited to TW based ROMs, they must be the same version of android. You can ODIN to stock 4.3 and take the 4.4 OTA or KIES
DigitalMD said:
You are limited to TW based ROMs, they must be the same version of android. You can ODIN to stock 4.3 and take the 4.4 OTA or KIES
Click to expand...
Click to collapse
Thanks for the reply I know I can go back to ML1 then safestrap 4.3 custom rooms.. What is the kies thing.. Will this mess up safestrap?
jcbjoe said:
Thanks for the reply I know I can go back to ML1 then safestrap 4.3 custom rooms.. What is the kies thing.. Will this mess up safestrap?
Click to expand...
Click to collapse
Kies is Samsungs desktop application for doing OTA updates.Its does the same thing as an OTA or ODIN.
If you want to use safestrap stay on 4.3 until the developers have it all worked out for 4.4 .
DigitalMD said:
Kies is Samsungs desktop application for doing OTA updates.Its does the same thing as an OTA or ODIN.
If you want to use safestrap stay on 4.3 until the developers have it all worked out for 4.4 .
Click to expand...
Click to collapse
Thanks
jcbjoe said:
Thanks for that reply I needed it.. Next question is why are there services out there that can downgrade the NC1 OR ML1 baseband? They could be scams but I'm just wondering.. Is it just the fact that a device or hacker hasn't found the correct exploit?
Thanks
Click to expand...
Click to collapse
There is a service that people claim to be able to downgrade the bootloader to 4.1 from 4.3 so you can unlock your bootloader.
I think mobile tech videos does it, and if they offer it then it wouldn't be a scam. Just not sure how much it would cost, or if it'd be worth it to you.
Sent from my HTC6525LVW using Tapatalk
Related
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
buhohitr said:
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
Click to expand...
Click to collapse
4.3
bennyboy2120 said:
4.3
Click to expand...
Click to collapse
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
Are you the same user that just posted in the Xposed framework thread about not being able to install Xposed?
Sent from my SCH-I535 using Tapatalk 4
Unfortunate. This confirms what I was worried about. :/
Sent from my Ñ£×Ú$ 5
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
naikoo said:
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
Click to expand...
Click to collapse
You're stuck on 4.3 now, your bootloader is locked. Using Odin to load a stock 4.3 firmware is the exact same thing.
You should've odin'd a stock 4.1.2 firmware, but it's too late now.
Sent from my SCH-I535 using Tapatalk 2
Safestrap Help
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Ahartless3 said:
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Click to expand...
Click to collapse
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
S3 Safestrap
buhohitr said:
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
Click to expand...
Click to collapse
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
I hear good word from users on old&slow tw rom over on Android development section
Sent from my unknown using Tapatalk
Ahartless3 said:
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
Click to expand...
Click to collapse
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
landshark68 said:
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
Click to expand...
Click to collapse
Perfect! Thanks for the info! I'm downloading Wicked Sensations for ML1 right now. Hopefully that works out.
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
android-incredible said:
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
Click to expand...
Click to collapse
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
SlimSnoopOS said:
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
Click to expand...
Click to collapse
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
android-incredible said:
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
Click to expand...
Click to collapse
Great. Now if they accidentally or intentionally take the 4.3 VRUCML1 OTA, using EZ Unlock will cause a bootloader hard brick. Please make sure your friend understands this.
Sent from my SCH-I535 using Tapatalk 4
Does anyone know if the s4 ROMs work like the play edition if not what does and do I need I specific safestrap?
Also just I side question: Can I downgrade using Odin to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
bennyboy2120 said:
Does anyone know if the s4 ROMs work like the play edition if not what does and do I need I specific safestrap?
Also just I side question: Can I downgrade using Odin to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Do not flash any rom not meant for the Verizon S3 (d2vzw aka SCH-I535). Am I right to assume you are on the VRUCML1 4.3 OTA? It has a locked bootloader and prevents you from Odin flashing any firmware that pre-dates 4.3 VRUCML1. Flashing anything in Odin will lead to a hard brick unless it is explicitly the VRUCML1 4.3 stock image. Do not use anything to unlock your bootloader, you will also hardbrick. You should get the idea by now that you can flash one thing in Odin and that is the VRUCML1 4.3 stock image.
If you are on the VRUCML1 update, you need to use Saferoot to gain root access. Then Safestrap to be able to flash VRUCML1 4.3 based custom roms. Only VRUCML1 or "ML1" roms are compatible with Safestrap. AOSP is incompatible with Safestrap, there is no timetable or even the hint of future compatibility. Also, if you want working wifi then you need to flash the VRUCML1 kernel modules after each clean flash of a VRUCML1 rom. These kernel modules are linked in the Safestrap thread as well. Good luck and have fun reading up.
From what I have been able to tell, it is not possible to downgrade from the 4.3 update to 4.1.2 I would just like to confirm that is the case? Is it possible to downgrade from 4.3 to an earlier version?
I would like to buy a Galaxy S3 SCH-I535 to use on Pageplus, and be able to flash ROMs etc. If I understand correctly, if the phone has already taken the 4.3 update then the bootloader is locked and flashing is not possible.
joelshort said:
From what I have been able to tell, it is not possible to downgrade from the 4.3 update to 4.1.2 I would just like to confirm that is the case? Is it possible to downgrade from 4.3 to an earlier version?
I would like to buy a Galaxy S3 SCH-I535 to use on Pageplus, and be able to flash ROMs etc. If I understand correctly, if the phone has already taken the 4.3 update then the bootloader is locked and flashing is not possible.
Click to expand...
Click to collapse
Correct, downgrade not possible. Flashing custom TW 4.3 ROMs is possible using safestrap
I know it's possible through Odin. You will most likely lose your data.
Here, I found this video for you. Looks promising. Odin files are in description! http://m.youtube.com/watch?v=hnBjJ7c1IAI
Sent from my HTCONE using xda app-developers app
<<< Please say thanks if I was of help!
aarongillion63 said:
I know it's possible through Odin.
Click to expand...
Click to collapse
No, it isn't. The OP's statement:
"if the phone has already taken the 4.3 update then the bootloader is locked and flashing is not possible."
Is correct, although you can use safestrap as DigitalMD says to run other 4.3 Touchwiz ROMs.
DigitalMD said:
Correct, downgrade not possible. Flashing custom TW 4.3 ROMs is possible using safestrap
Click to expand...
Click to collapse
So just to be clear I can flash 4.3 roms? I gather that rooting/flashing/recovery is a bit "easier" and less risky without the 4.3 update. I have flashed an old phone before (HTC Incredible 2) so I have some experience, but if there is significantly more risk involved with a 4.3 phone then I'll probably look for a phone that hasn't taken the update yet.
Moved to Q&A.
joelshort said:
So just to be clear I can flash 4.3 roms? I gather that rooting/flashing/recovery is a bit "easier" and less risky without the 4.3 update. I have flashed an old phone before (HTC Incredible 2) so I have some experience, but if there is significantly more risk involved with a 4.3 phone then I'll probably look for a phone that hasn't taken the update yet.
Click to expand...
Click to collapse
Mostly correct, TouchWiz 4.3 roms only, not aosp 4.3 roms, it's a big difference.
Read everything here:
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my HTC6525LVW using Tapatalk
I found a link to install TWRP recovery onto my phone but first I have to unlock my bootloader. I bricked 2 identical phones in the past using EZ Unlock to unlock the bootloader. Both times as soon as I rebooted my phone...they never worked again. My question is how do I safely unlock my bootloader without this happening again? I also want to know once my bootloader is unlocked, and TWRP recovery is safely on my phone, will I then be able to freely install custom roms? Or will I still need to install safestrap and safestrap compatible roms or touchwiz roms only?
ronnieshane1 said:
I found a link to install TWRP recovery onto my phone but first I have to unlock my bootloader. I bricked 2 identical phones in the past using EZ Unlock to unlock the bootloader. Both times as soon as I rebooted my phone...they never worked again. My question is how do I safely unlock my bootloader without this happening again? I also want to know once my bootloader is unlocked, and TWRP recovery is safely on my phone, will I then be able to freely install custom roms? Or will I still need to install safestrap and safestrap compatible roms or touchwiz roms only?
Click to expand...
Click to collapse
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
landshark68 said:
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there any custom recoveries I can use? How about online nandroid?
ronnieshane1 said:
Is there any custom recoveries I can use? How about online nandroid?
Click to expand...
Click to collapse
There is no custom recovery that us compatible with either the VRUCML1 or VRUCNC1 TouchWiz OTAs. Safestrap is the closest you will get to a "custom recovery" from TW 4.3+.
More info below. It states everything that Landshark has already posted btw:
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my SCH-I535 using Tapatalk 4
Custom Roms
landshark68 said:
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What are some custom 4.3 touchwiz roms for NC1?
[GUIDE][ML1/NC1] TW 4.3 Sticky Roll-Up Thread (5-24-14) - http://forum.xda-developers.com/showthread.php?t=2639337
Here is a lit of rome or 4.3 touchwiz roms
Custom Roms
AllianceRom
Wicked Sensations Rom
MOAR
CleanROM 8.2 Core Edition
Samstock
Slapnuts
I535 Mostly Stock
Stock Rooted ML1 Rom
Yet when you go into the rom it self they all are on the old ML1 rom none say anything about NC1
Question is .. if i use safestrap on my locked boot loader with NC1 since i will be creating a new rom slot will i be able to flash the ML1 roms via safestrap or am i totally hosed or are there roms out there for 4.3 touchwiz for NC1 ?
Thanks
jcbjoe said:
What are some custom 4.3 touchwiz roms for NC1 ?
[GUIDE][ML1/NC1] TW 4.3 Sticky Roll-Up Thread (5-24-14) - http://forum.xda-developers.com/showthread.php?t=2639337
Here is a lit of rome or 4.3 touchwiz roms
Custom Roms
AllianceRom
Wicked Sensations Rom
MOAR
CleanROM 8.2 Core Edition
Samstock
Slapnuts
I535 Mostly Stock
Stock Rooted ML1 Rom
Yet when you go into the rom it self they all are on the old ML1 rom none say anything about NC1
Question is .. if i use safestrap on my locked boot loader with NC1 since i will be creating a new rom slot will i be able to flash the ML1 roms via safestrap or am i totally hosed or are there roms out there for 4.3 touchwiz for NC1 ?
Thanks
Click to expand...
Click to collapse
There are no 4.3 Touchwiz ROMs for NC1. If you want to have fully functioning ROMs (meaning have working WiFi) through safestrap you have to ODIN flash back to ML1, then root, load safestrap, and flash an ML1 based 4.3 TW ROM, then the kernel module from the safestrap thread. Another user in these forums was talking about posting an NC1 kernel module, but I haven't seen any results on that. If you take the OTA upgrade or ODIN flash up to NE1 4.4.2, safestrap is not yet available for that.
Another question
landshark68 said:
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
landshark68 said:
There are no 4.3 Touchwiz ROMs for NC1. If you want to have fully functioning ROMs (meaning have working WiFi) through safestrap you have to ODIN flash back to ML1, then root, load safestrap, and flash an ML1 based 4.3 TW ROM, then the kernel module from the safestrap thread. Another user in these forums was talking about posting an NC1 kernel module, but I haven't seen any results on that. If you take the OTA upgrade or ODIN flash up to NE1 4.4.2, safestrap is not yet available for that.
Click to expand...
Click to collapse
Thanks for the reply
So if I'm on NC1 i have to go back to ML1 .. will i be able to if my boot loader is locked and looks like this
ODIN MODE:
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS OFFICAL
QUALCOM SECREBOOT ENABLE
WARRANTY BIT: 0
BOOTLOADERAP SWREV: 1
Thanks
jcbjoe said:
Thanks for the reply
So if I'm on NC1 i have to go back to ML1 .. will i be able to if my boot loader is locked and looks like this
ODIN MODE:
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS OFFICAL
QUALCOM SECREBOOT ENABLE
WARRANTY BIT: 0
BOOTLOADERAP SWREV: 1
Thanks
Click to expand...
Click to collapse
Yes. ML1 and NC1 are both 4.3 so you can go to ML1 No problem.
Sent from my SCH-I535 using Tapatalk
697
Sandman-007 said:
Yes. ML1 and NC1 are both 4.3 so you can go to ML1 No problem.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thanks
Sandman-007 said:
Yes. ML1 and NC1 are both 4.3 so you can go to ML1 No problem.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Wow you guys are awesome .. i odined back to ML1 rooted then safestraped and now I'm on a custom 4.3 touchwiz Rom
Sent from my SCH-I535 using XDA Free mobile app
jcbjoe said:
Wow you guys are awesome .. i odined back to ML1 rooted then safestraped and now I'm on a custom 4.3 touchwiz Rom
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Glad to see you are all set up again :good:
Sent from my SCH-I535 using Tapatalk
Hey guys, just did a ton of searching but can't find much on rooting the S3 whiile its on 4.3 with NC1. Could anyone here help me out or get me in the right direction? Thanks in advance.
will.bates94 said:
Hey guys, just did a ton of searching but can't find much on rooting the S3 whiile its on 4.3 with NC1. Could anyone here help me out or get me in the right direction? Thanks in advance.
Click to expand...
Click to collapse
Easiest way right now would be to Odin back to ml1.
ThePagel said:
Easiest way right now would be to Odin back to ml1.
Click to expand...
Click to collapse
Okay, and then I would be able to root ml1 and install safestrap? I thought you couldnt odin back to older basebands?
will.bates94 said:
Okay, and then I would be able to roost ml1 and install safestrap? I thought you couldnt odin back to older basebands?
Click to expand...
Click to collapse
I think its because ml1 and nc1 are almost the exact same build.
ThePagel said:
I think its because ml1 and nc1 are almost the exact same build.
Click to expand...
Click to collapse
Apparently you cant get the ml1 file anymore from what I read? Any ideas?
will.bates94 said:
Okay, and then I would be able to root ml1 and install safestrap? I thought you couldnt odin back to older basebands?
Click to expand...
Click to collapse
You simply cannot Odin flash back to pre-4.3 firmware. 4.3 to 4.3 is fine like @ThePagel posted.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
You simply cannot Odin flash back to pre-4.3 firmware. 4.3 to 4.3 is fine like @ThePagel posted.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
will.bates94 said:
Apparently you cant get the ml1 file anymore from what I read? Any ideas?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2589314
---------- Post added at 12:53 PM ---------- Previous post was at 12:48 PM ----------
will.bates94 said:
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
Click to expand...
Click to collapse
The kernel has been changed so saferoot will not work. I'm sure there are root methods for after the update but they won't be one click root. When I get home tonight I'll make a custom tar pre rooted for people who want to be on the newest build.
will.bates94 said:
Apparently you cant get the ml1 file anymore from what I read? Any ideas?
Click to expand...
Click to collapse
So I do not confuse you, you're referring to another file that is for those of us who have an unlocked bootloader. It is the VRUCML1 modem-ONLY zip, this is something that is useless to you on 4.3 but is useful to those of us with an unlocked bootloader.
Edit: this modem-ONLY zip is roughly 20 MBs in size. Completely different thing than what ThePagel has supplied with a link. Basically, forget what you read about VRUCML1 being unavailable because the specific file is of no use to you.
ThePagel posted the Odin flashable, stock image tar that is readily available. That has always been available and will continue to be so. That 1.2+ GB tar file is to return to fresh, out of the box factory settings.
will.bates94 said:
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
Click to expand...
Click to collapse
Yes, they are the same. I was simply agreeing with ThePagel. VRUCML1 and VRUCNC1 are both 4.3. You can not flash anything pre-4.3, so nothing that starts with VRA** or VRB***. Those are off limits for you.
will.bates94 said:
Isn't ml1 4.3 then since he said they're so close to being the same? What are my options then?
Click to expand...
Click to collapse
Since you are already locked into 4.3, once you ODIN back to ML1, your only options are saferoot, safestrap, and safestrap compliant ROMs which are pretty much all the 4.3 touchwiz ROMs. You can read all about them in these threads:
http://forum.xda-developers.com/showthread.php?t=2639337
http://forum.xda-developers.com/showthread.php?t=2605648
landshark68 said:
Since you are already locked into 4.3, once you ODIN back to ML1, your only options are saferoot, safestrap, and safestrap compliant ROMs which are pretty much all the 4.3 touchwiz ROMs. You can read all about them in these threads:
http://forum.xda-developers.com/showthread.php?t=2639337
http://forum.xda-developers.com/showthread.php?t=2605648
Click to expand...
Click to collapse
Does it matter what version of odin I use?
@ThePagel Rooted on ml1, any rom suggestions since hyperdrive is a 4.1.2 based rom? which breaks my heart
will.bates94 said:
@ThePagel Rooted on ml1, any rom suggestions since hyperdrive is a 4.1.2 based rom? which breaks my heart
Click to expand...
Click to collapse
Old and slows ROM is probably the cleanest most stable 4.3 tw rom out there.
ThePagel said:
Old and slows ROM is probably the cleanest most stable 4.3 tw rom out there.
Click to expand...
Click to collapse
I don't see old and slows rom. http://forum.xda-developers.com/showthread.php?p=30640131 checked that index and I also did a search. Any pointers? Im normally pretty good with finding **** like this lol.
Here's a 4.3 specific list
http://forum.xda-developers.com/showthread.php?t=2653902