Database Info

[Q] how to check if my bootloader is unlockeed if not how do i

i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx

bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)

buhohitr said:
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
Click to expand...
Click to collapse
4.3

bennyboy2120 said:
4.3
Click to expand...
Click to collapse
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2

bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
Are you the same user that just posted in the Xposed framework thread about not being able to install Xposed?
Sent from my SCH-I535 using Tapatalk 4

Unfortunate. This confirms what I was worried about. :/
Sent from my Ñ£×Ú$ 5

BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.

naikoo said:
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
Click to expand...
Click to collapse
You're stuck on 4.3 now, your bootloader is locked. Using Odin to load a stock 4.3 firmware is the exact same thing.
You should've odin'd a stock 4.1.2 firmware, but it's too late now.
Sent from my SCH-I535 using Tapatalk 2

Safestrap Help
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.

Ahartless3 said:
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Click to expand...
Click to collapse
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648

S3 Safestrap
buhohitr said:
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
Click to expand...
Click to collapse
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.

I hear good word from users on old&slow tw rom over on Android development section
Sent from my unknown using Tapatalk

Ahartless3 said:
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
Click to expand...
Click to collapse
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development

landshark68 said:
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
Click to expand...
Click to collapse
Perfect! Thanks for the info! I'm downloading Wicked Sensations for ML1 right now. Hopefully that works out.

A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2

android-incredible said:
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
Click to expand...
Click to collapse
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.

SlimSnoopOS said:
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
Click to expand...
Click to collapse
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2

android-incredible said:
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
Click to expand...
Click to collapse
Great. Now if they accidentally or intentionally take the 4.3 VRUCML1 OTA, using EZ Unlock will cause a bootloader hard brick. Please make sure your friend understands this.
Sent from my SCH-I535 using Tapatalk 4

Safestrap for s3? Any ROMs I can get I don't know which ones work

Does anyone know if the s4 ROMs work like the play edition if not what does and do I need I specific safestrap?
Also just I side question: Can I downgrade using Odin to 4.1.2?
Sent from my SCH-I535 using xda app-developers app

bennyboy2120 said:
Does anyone know if the s4 ROMs work like the play edition if not what does and do I need I specific safestrap?
Also just I side question: Can I downgrade using Odin to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Do not flash any rom not meant for the Verizon S3 (d2vzw aka SCH-I535). Am I right to assume you are on the VRUCML1 4.3 OTA? It has a locked bootloader and prevents you from Odin flashing any firmware that pre-dates 4.3 VRUCML1. Flashing anything in Odin will lead to a hard brick unless it is explicitly the VRUCML1 4.3 stock image. Do not use anything to unlock your bootloader, you will also hardbrick. You should get the idea by now that you can flash one thing in Odin and that is the VRUCML1 4.3 stock image.
If you are on the VRUCML1 update, you need to use Saferoot to gain root access. Then Safestrap to be able to flash VRUCML1 4.3 based custom roms. Only VRUCML1 or "ML1" roms are compatible with Safestrap. AOSP is incompatible with Safestrap, there is no timetable or even the hint of future compatibility. Also, if you want working wifi then you need to flash the VRUCML1 kernel modules after each clean flash of a VRUCML1 rom. These kernel modules are linked in the Safestrap thread as well. Good luck and have fun reading up.

[Q] Rooted update to 4.3?

Had a note 3 but just switched back to my GS3. I am a super noob, but read for a little bit and had originally rooted my GS3 so that I could use a free tether mod.
Now that I am using this phone again should I update the software to stock 4.3?
...and if yes how should I do it? can I just odin ML1 or NL1 from here?
Here are the current phone specs:
4.1.2
baseband version: I605VRAMC3
Kernel version: 3.0.31
rooted and bootloader unlocked using casual
crm recovery 6.0.3.0
OTA updates fail because of the custom recovery, but I still have to defer verizon asking to update software once a day...which is way annoying.
Any advice is appreciated. Thanks in advance!

theomms said:
Had a note 3 but just switched back to my GS3. I am a super noob, but read for a little bit and had originally rooted my GS3 so that I could use a free tether mod.
Now that I am using this phone again should I update the software to stock 4.3?
...and if yes how should I do it? can I just odin ML1 or NL1 from here?
Here are the current phone specs:
4.1.2
baseband version: I605VRAMC3
Kernel version: 3.0.31
rooted and bootloader unlocked using casual
crm recovery 6.0.3.0
OTA updates fail because of the custom recovery, but I still have to defer verizon asking to update software once a day...which is way annoying.
Any advice is appreciated. Thanks in advance!
Click to expand...
Click to collapse
"i605" is a Galaxy Note II. Are you positive that you have a Galaxy S3 in your possession?
If you do have an SCH-I535 (Verizon S3), please proceed reading:
Do you plan on using AOSP roms or custom kernels? If so, do not flash VRUCML1 or VRUCNC1 because both updates will, when it's all said and done, only allow you to use custom TW roms.
Sent from my SCH-I535 using Tapatalk 4

SlimSnoopOS said:
"i605" is a Galaxy Note II. Are you positive that you have a Galaxy S3 in your possession?
If you do have an SCH-I535 (Verizon S3), please proceed reading:
Do you plan on using AOSP roms or custom kernels? If so, do not flash VRUCML1 or VRUCNC1 because both updates will, when it's all said and done, only allow you to use custom TW roms.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I want to add to this and stress that you should NOT install the ML1 or NC1 firmware. I got a replacement phone with it and cannot put any AOSP Roms on it (or a real recovery for that matter).
If tether literally all you care about or basic root you should could find a good guide for updating in case it might brick your phone the way you have it now. After that I hear FoxFi is a working tether app for root.
Sent from my SCH-I535 using Tapatalk

[Q] 4.4 or 4.4.4 Rom

Hey All
Since I'm on a locked boot loader NC1 or ML1 shouldn't matter .. can i install a 4.4.4 or 4.4 rom ? i know i would have to do it thru safestrap but would it be possible ? i thought i could only flash 4.3 touchwiz nothing higher ?
Any help would be nice
Thanks

jcbjoe said:
Hey All
Since I'm on a locked boot loader NC1 or ML1 shouldn't matter .. can i install a 4.4.4 or 4.4 rom ? i know i would have to do it thru safestrap but would it be possible ? i thought i could only flash 4.3 touchwiz nothing higher ?
Any help would be nice
Thanks
Click to expand...
Click to collapse
No, you cannot flash a 4.4.4 or 4.4 ROM. If you are on 4.3 NC1 or ML1, you are restricted to running only 4.3 touchwiz based ROMs through safestrap. Ever since the 4.3 ML1 update, different components of the phone (kernel, bootloader, etc.) are signed with a key which must match in order for the phone to boot up. That is why you are restricted to 4.3 touchwiz ROMs in safestrap. They have to be able to run off the 4.3 stock kernel. A 4.4 touchwiz ROM will not have the same key signature verification as a 4.3 touchwiz ROM. And you are definitely not capable of running any kind of AOSP ROM now that your bootloader is locked.

landshark68 said:
No, you cannot flash a 4.4.4 or 4.4 ROM. If you are on 4.3 NC1 or ML1, you are restricted to running only 4.3 touchwiz based ROMs through safestrap. Ever since the 4.3 ML1 update, different components of the phone (kernel, bootloader, etc.) are signed with a key which must match in order for the phone to boot up. That is why you are restricted to 4.3 touchwiz ROMs in safestrap. They have to be able to run off the 4.3 stock kernel. A 4.4 touchwiz ROM will not have the same key signature verification as a 4.3 touchwiz ROM. And you are definitely not capable of running any kind of AOSP ROM now that your bootloader is locked.
Click to expand...
Click to collapse
Thanks for that reply I needed it.. Next question is why are there services out there that can downgrade the NC1 OR ML1 baseband? They could be scams but I'm just wondering.. Is it just the fact that a device or hacker hasn't found the correct exploit?
Thanks

jcbjoe said:
Thanks for that reply I needed it.. Next question is why are there services out there that can downgrade the NC1 OR ML1 baseband? They could be scams but I'm just wondering.. Is it just the fact that a device or hacker hasn't found the correct exploit?
Thanks
Click to expand...
Click to collapse
You are limited to TW based ROMs, they must be the same version of android. You can ODIN to stock 4.3 and take the 4.4 OTA or KIES

DigitalMD said:
You are limited to TW based ROMs, they must be the same version of android. You can ODIN to stock 4.3 and take the 4.4 OTA or KIES
Click to expand...
Click to collapse
Thanks for the reply I know I can go back to ML1 then safestrap 4.3 custom rooms.. What is the kies thing.. Will this mess up safestrap?

jcbjoe said:
Thanks for the reply I know I can go back to ML1 then safestrap 4.3 custom rooms.. What is the kies thing.. Will this mess up safestrap?
Click to expand...
Click to collapse
Kies is Samsungs desktop application for doing OTA updates.Its does the same thing as an OTA or ODIN.
If you want to use safestrap stay on 4.3 until the developers have it all worked out for 4.4 .

DigitalMD said:
Kies is Samsungs desktop application for doing OTA updates.Its does the same thing as an OTA or ODIN.
If you want to use safestrap stay on 4.3 until the developers have it all worked out for 4.4 .
Click to expand...
Click to collapse
Thanks

jcbjoe said:
Thanks for that reply I needed it.. Next question is why are there services out there that can downgrade the NC1 OR ML1 baseband? They could be scams but I'm just wondering.. Is it just the fact that a device or hacker hasn't found the correct exploit?
Thanks
Click to expand...
Click to collapse
There is a service that people claim to be able to downgrade the bootloader to 4.1 from 4.3 so you can unlock your bootloader.
I think mobile tech videos does it, and if they offer it then it wouldn't be a scam. Just not sure how much it would cost, or if it'd be worth it to you.
Sent from my HTC6525LVW using Tapatalk

I need help

Guys I just recovered my Galaxy S3 Verizon variant and I see if I install twrp, it would brick my device because I'm on 4.4.2 bootloader.
I want to install Lineageos how can I do it?

yoahmad1995 said:
Guys I just recovered my Galaxy S3 Verizon variant and I see if I install twrp, it would brick my device because I'm on 4.4.2 bootloader.
I want to install Lineageos how can I do it?
Click to expand...
Click to collapse
You can't, once you took the 4.4.2 update you've got a permanently locked bootloader, period. You will never be able to use TWRP/CWM or AOSP/CM based ROM or LineageOS and that's all there is to it, don't even waste your time continuing to search for away around the bootloader because it can't be done.
Your only option is root and Xposed or Safestrap recovery and modified stock ROMs.
Sent from my SM-S903VL using Tapatalk

Droidriven said:
You can't, once you took the 4.4.2 update you've got a permanently locked bootloader, period. You will never be able to use TWRP/CWM or AOSP/CM based ROM or Lineages and that's all there us to it, don't even waste your time continuing to search for away around the bootloader because it can't be done.
Your only option is root and Xposed or Safestrap recovery and modified stock ROMs.
Click to expand...
Click to collapse
Oh got it. But it was 4.3 and I read even 4.3 is locked. Thank you for explaining!
Sent from my Galaxy S5 using XDA Labs

yoahmad1995 said:
Oh got it. But it was 4.3 and I read even 4.3 is locked. Thank you for explaining!
Sent from my Galaxy S5 using XDA Labs
Click to expand...
Click to collapse
There is a 4.3 build that wasn't locked(I think it was the ML1 build), then there was a 4.3 update that had locked bootloader, once that 4.3 is taken everything after that is locked.
If you have the original 4.3 and not the locked 4.3 update then you can use TWRP and custom ROMs
Sent from my SM-S903VL using Tapatalk