Had a note 3 but just switched back to my GS3. I am a super noob, but read for a little bit and had originally rooted my GS3 so that I could use a free tether mod.
Now that I am using this phone again should I update the software to stock 4.3?
...and if yes how should I do it? can I just odin ML1 or NL1 from here?
Here are the current phone specs:
4.1.2
baseband version: I605VRAMC3
Kernel version: 3.0.31
rooted and bootloader unlocked using casual
crm recovery 6.0.3.0
OTA updates fail because of the custom recovery, but I still have to defer verizon asking to update software once a day...which is way annoying.
Any advice is appreciated. Thanks in advance!
theomms said:
Had a note 3 but just switched back to my GS3. I am a super noob, but read for a little bit and had originally rooted my GS3 so that I could use a free tether mod.
Now that I am using this phone again should I update the software to stock 4.3?
...and if yes how should I do it? can I just odin ML1 or NL1 from here?
Here are the current phone specs:
4.1.2
baseband version: I605VRAMC3
Kernel version: 3.0.31
rooted and bootloader unlocked using casual
crm recovery 6.0.3.0
OTA updates fail because of the custom recovery, but I still have to defer verizon asking to update software once a day...which is way annoying.
Any advice is appreciated. Thanks in advance!
Click to expand...
Click to collapse
"i605" is a Galaxy Note II. Are you positive that you have a Galaxy S3 in your possession?
If you do have an SCH-I535 (Verizon S3), please proceed reading:
Do you plan on using AOSP roms or custom kernels? If so, do not flash VRUCML1 or VRUCNC1 because both updates will, when it's all said and done, only allow you to use custom TW roms.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
"i605" is a Galaxy Note II. Are you positive that you have a Galaxy S3 in your possession?
If you do have an SCH-I535 (Verizon S3), please proceed reading:
Do you plan on using AOSP roms or custom kernels? If so, do not flash VRUCML1 or VRUCNC1 because both updates will, when it's all said and done, only allow you to use custom TW roms.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
I want to add to this and stress that you should NOT install the ML1 or NC1 firmware. I got a replacement phone with it and cannot put any AOSP Roms on it (or a real recovery for that matter).
If tether literally all you care about or basic root you should could find a good guide for updating in case it might brick your phone the way you have it now. After that I hear FoxFi is a working tether app for root.
Sent from my SCH-I535 using Tapatalk
Related
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
buhohitr said:
You need to tell us what rom version you're running? Go into settings->about phone and report the rom version.(like 4.1.2 or 4.3 etc..)
Click to expand...
Click to collapse
4.3
bennyboy2120 said:
4.3
Click to expand...
Click to collapse
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
bennyboy2120 said:
i rooted my gs3 from verizon how to i flash custom roms and unlock my boot loader: note my samsung unlock padlock img boots up first and i have superuser thx
Click to expand...
Click to collapse
Are you the same user that just posted in the Xposed framework thread about not being able to install Xposed?
Sent from my SCH-I535 using Tapatalk 4
Unfortunate. This confirms what I was worried about. :/
Sent from my Ñ£×Ú$ 5
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
naikoo said:
Is this true for all 4.3 or just those with Knox? Last night I was trying to update from cm10.2 to cm11 and realised that trwp needed an update. After a some failed boots pf cm10 and 11 I decided to just go back to stock since I need it during the day..and unknowingly put the dreaded 4.3 on via odin. I understand how to get root...but what I really want is my bootloader again. Did I screw myself by putting 4.3 on? Thanks.
Click to expand...
Click to collapse
You're stuck on 4.3 now, your bootloader is locked. Using Odin to load a stock 4.3 firmware is the exact same thing.
You should've odin'd a stock 4.1.2 firmware, but it's too late now.
Sent from my SCH-I535 using Tapatalk 2
Safestrap Help
BadUsername said:
You have a locked bootloader, and you can't unlock it.
You can only root, install safestrap, and flash touchwiz 4.3 roms only.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Ahartless3 said:
I'm in the same boat with 4.3 - rooted with saferoot, but when I went to download safestrap to flash the only customs roms I can (TW), I don't see a download for the SCH-i535. The closest I see is for S4. Where can I get the right Safestrap download?
Thanks for your help.
Click to expand...
Click to collapse
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
S3 Safestrap
buhohitr said:
Here u go:
http://forum.xda-developers.com/showthread.php?t=2605648
Click to expand...
Click to collapse
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
I hear good word from users on old&slow tw rom over on Android development section
Sent from my unknown using Tapatalk
Ahartless3 said:
Awesome. This is exactly what I was looking for. I'm pretty set on doing this now, but I'm trying to find a solid rom to flash once I get Safestrap. Any suggestions? All I've found so far are S4 roms. The Google Play Edition rom looks pretty good.
Thanks again for your help.
Click to expand...
Click to collapse
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
landshark68 said:
Don't flash any ROMs for the S4 onto your S3. Through safestrap you can flash almost any of the 4.3 TW (ML1) ROMs found in this section:
http://forum.xda-developers.com/galaxy-s3-verizon/development
Click to expand...
Click to collapse
Perfect! Thanks for the info! I'm downloading Wicked Sensations for ML1 right now. Hopefully that works out.
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
android-incredible said:
A friend of mine root his phone but he don't know how to unlock the bootloader he is on 4.1.2
Click to expand...
Click to collapse
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
SlimSnoopOS said:
If he rooted his Verizon S3 on VRBMF1 4.1.2, then he could use EZ Unlock v1.2 to unlock the bootloader. Or he could use Casual.
Click to expand...
Click to collapse
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
android-incredible said:
Thanks I unlock the bootloader with the EZ-UNLOCK v1.2
Click to expand...
Click to collapse
Great. Now if they accidentally or intentionally take the 4.3 VRUCML1 OTA, using EZ Unlock will cause a bootloader hard brick. Please make sure your friend understands this.
Sent from my SCH-I535 using Tapatalk 4
Does anyone know if the s4 ROMs work like the play edition if not what does and do I need I specific safestrap?
Also just I side question: Can I downgrade using Odin to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
bennyboy2120 said:
Does anyone know if the s4 ROMs work like the play edition if not what does and do I need I specific safestrap?
Also just I side question: Can I downgrade using Odin to 4.1.2?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Do not flash any rom not meant for the Verizon S3 (d2vzw aka SCH-I535). Am I right to assume you are on the VRUCML1 4.3 OTA? It has a locked bootloader and prevents you from Odin flashing any firmware that pre-dates 4.3 VRUCML1. Flashing anything in Odin will lead to a hard brick unless it is explicitly the VRUCML1 4.3 stock image. Do not use anything to unlock your bootloader, you will also hardbrick. You should get the idea by now that you can flash one thing in Odin and that is the VRUCML1 4.3 stock image.
If you are on the VRUCML1 update, you need to use Saferoot to gain root access. Then Safestrap to be able to flash VRUCML1 4.3 based custom roms. Only VRUCML1 or "ML1" roms are compatible with Safestrap. AOSP is incompatible with Safestrap, there is no timetable or even the hint of future compatibility. Also, if you want working wifi then you need to flash the VRUCML1 kernel modules after each clean flash of a VRUCML1 rom. These kernel modules are linked in the Safestrap thread as well. Good luck and have fun reading up.
From what I have been able to tell, it is not possible to downgrade from the 4.3 update to 4.1.2 I would just like to confirm that is the case? Is it possible to downgrade from 4.3 to an earlier version?
I would like to buy a Galaxy S3 SCH-I535 to use on Pageplus, and be able to flash ROMs etc. If I understand correctly, if the phone has already taken the 4.3 update then the bootloader is locked and flashing is not possible.
joelshort said:
From what I have been able to tell, it is not possible to downgrade from the 4.3 update to 4.1.2 I would just like to confirm that is the case? Is it possible to downgrade from 4.3 to an earlier version?
I would like to buy a Galaxy S3 SCH-I535 to use on Pageplus, and be able to flash ROMs etc. If I understand correctly, if the phone has already taken the 4.3 update then the bootloader is locked and flashing is not possible.
Click to expand...
Click to collapse
Correct, downgrade not possible. Flashing custom TW 4.3 ROMs is possible using safestrap
I know it's possible through Odin. You will most likely lose your data.
Here, I found this video for you. Looks promising. Odin files are in description! http://m.youtube.com/watch?v=hnBjJ7c1IAI
Sent from my HTCONE using xda app-developers app
<<< Please say thanks if I was of help!
aarongillion63 said:
I know it's possible through Odin.
Click to expand...
Click to collapse
No, it isn't. The OP's statement:
"if the phone has already taken the 4.3 update then the bootloader is locked and flashing is not possible."
Is correct, although you can use safestrap as DigitalMD says to run other 4.3 Touchwiz ROMs.
DigitalMD said:
Correct, downgrade not possible. Flashing custom TW 4.3 ROMs is possible using safestrap
Click to expand...
Click to collapse
So just to be clear I can flash 4.3 roms? I gather that rooting/flashing/recovery is a bit "easier" and less risky without the 4.3 update. I have flashed an old phone before (HTC Incredible 2) so I have some experience, but if there is significantly more risk involved with a 4.3 phone then I'll probably look for a phone that hasn't taken the update yet.
Moved to Q&A.
joelshort said:
So just to be clear I can flash 4.3 roms? I gather that rooting/flashing/recovery is a bit "easier" and less risky without the 4.3 update. I have flashed an old phone before (HTC Incredible 2) so I have some experience, but if there is significantly more risk involved with a 4.3 phone then I'll probably look for a phone that hasn't taken the update yet.
Click to expand...
Click to collapse
Mostly correct, TouchWiz 4.3 roms only, not aosp 4.3 roms, it's a big difference.
Read everything here:
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my HTC6525LVW using Tapatalk
I found a link to install TWRP recovery onto my phone but first I have to unlock my bootloader. I bricked 2 identical phones in the past using EZ Unlock to unlock the bootloader. Both times as soon as I rebooted my phone...they never worked again. My question is how do I safely unlock my bootloader without this happening again? I also want to know once my bootloader is unlocked, and TWRP recovery is safely on my phone, will I then be able to freely install custom roms? Or will I still need to install safestrap and safestrap compatible roms or touchwiz roms only?
ronnieshane1 said:
I found a link to install TWRP recovery onto my phone but first I have to unlock my bootloader. I bricked 2 identical phones in the past using EZ Unlock to unlock the bootloader. Both times as soon as I rebooted my phone...they never worked again. My question is how do I safely unlock my bootloader without this happening again? I also want to know once my bootloader is unlocked, and TWRP recovery is safely on my phone, will I then be able to freely install custom roms? Or will I still need to install safestrap and safestrap compatible roms or touchwiz roms only?
Click to expand...
Click to collapse
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
landshark68 said:
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is there any custom recoveries I can use? How about online nandroid?
ronnieshane1 said:
Is there any custom recoveries I can use? How about online nandroid?
Click to expand...
Click to collapse
There is no custom recovery that us compatible with either the VRUCML1 or VRUCNC1 TouchWiz OTAs. Safestrap is the closest you will get to a "custom recovery" from TW 4.3+.
More info below. It states everything that Landshark has already posted btw:
http://forum.xda-developers.com/showthread.php?t=2639337
Sent from my SCH-I535 using Tapatalk 4
Custom Roms
landshark68 said:
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What are some custom 4.3 touchwiz roms for NC1?
[GUIDE][ML1/NC1] TW 4.3 Sticky Roll-Up Thread (5-24-14) - http://forum.xda-developers.com/showthread.php?t=2639337
Here is a lit of rome or 4.3 touchwiz roms
Custom Roms
AllianceRom
Wicked Sensations Rom
MOAR
CleanROM 8.2 Core Edition
Samstock
Slapnuts
I535 Mostly Stock
Stock Rooted ML1 Rom
Yet when you go into the rom it self they all are on the old ML1 rom none say anything about NC1
Question is .. if i use safestrap on my locked boot loader with NC1 since i will be creating a new rom slot will i be able to flash the ML1 roms via safestrap or am i totally hosed or are there roms out there for 4.3 touchwiz for NC1 ?
Thanks
jcbjoe said:
What are some custom 4.3 touchwiz roms for NC1 ?
[GUIDE][ML1/NC1] TW 4.3 Sticky Roll-Up Thread (5-24-14) - http://forum.xda-developers.com/showthread.php?t=2639337
Here is a lit of rome or 4.3 touchwiz roms
Custom Roms
AllianceRom
Wicked Sensations Rom
MOAR
CleanROM 8.2 Core Edition
Samstock
Slapnuts
I535 Mostly Stock
Stock Rooted ML1 Rom
Yet when you go into the rom it self they all are on the old ML1 rom none say anything about NC1
Question is .. if i use safestrap on my locked boot loader with NC1 since i will be creating a new rom slot will i be able to flash the ML1 roms via safestrap or am i totally hosed or are there roms out there for 4.3 touchwiz for NC1 ?
Thanks
Click to expand...
Click to collapse
There are no 4.3 Touchwiz ROMs for NC1. If you want to have fully functioning ROMs (meaning have working WiFi) through safestrap you have to ODIN flash back to ML1, then root, load safestrap, and flash an ML1 based 4.3 TW ROM, then the kernel module from the safestrap thread. Another user in these forums was talking about posting an NC1 kernel module, but I haven't seen any results on that. If you take the OTA upgrade or ODIN flash up to NE1 4.4.2, safestrap is not yet available for that.
Another question
landshark68 said:
If you are on 4.3 you cannot flash TWRP or unlock your bootloader. It is saferoot, safestrap, and safestrap compatible 4.3 TW ROMs only for you.
Sent from the Shark Tank using XDA Premium 4 mobile app
Click to expand...
Click to collapse
landshark68 said:
There are no 4.3 Touchwiz ROMs for NC1. If you want to have fully functioning ROMs (meaning have working WiFi) through safestrap you have to ODIN flash back to ML1, then root, load safestrap, and flash an ML1 based 4.3 TW ROM, then the kernel module from the safestrap thread. Another user in these forums was talking about posting an NC1 kernel module, but I haven't seen any results on that. If you take the OTA upgrade or ODIN flash up to NE1 4.4.2, safestrap is not yet available for that.
Click to expand...
Click to collapse
Thanks for the reply
So if I'm on NC1 i have to go back to ML1 .. will i be able to if my boot loader is locked and looks like this
ODIN MODE:
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS OFFICAL
QUALCOM SECREBOOT ENABLE
WARRANTY BIT: 0
BOOTLOADERAP SWREV: 1
Thanks
jcbjoe said:
Thanks for the reply
So if I'm on NC1 i have to go back to ML1 .. will i be able to if my boot loader is locked and looks like this
ODIN MODE:
PRODUCT NAME: SCH-I535
CURRENT BINARY: SAMSUNG OFFICAL
SYSTEM STATUS OFFICAL
QUALCOM SECREBOOT ENABLE
WARRANTY BIT: 0
BOOTLOADERAP SWREV: 1
Thanks
Click to expand...
Click to collapse
Yes. ML1 and NC1 are both 4.3 so you can go to ML1 No problem.
Sent from my SCH-I535 using Tapatalk
697
Sandman-007 said:
Yes. ML1 and NC1 are both 4.3 so you can go to ML1 No problem.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Thanks
Sandman-007 said:
Yes. ML1 and NC1 are both 4.3 so you can go to ML1 No problem.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Wow you guys are awesome .. i odined back to ML1 rooted then safestraped and now I'm on a custom 4.3 touchwiz Rom
Sent from my SCH-I535 using XDA Free mobile app
jcbjoe said:
Wow you guys are awesome .. i odined back to ML1 rooted then safestraped and now I'm on a custom 4.3 touchwiz Rom
Sent from my SCH-I535 using XDA Free mobile app
Click to expand...
Click to collapse
Glad to see you are all set up again :good:
Sent from my SCH-I535 using Tapatalk
Looking for a stock rooted ROM for the latest update. Is one out there anywhere?
Sent from my Verizon Wireless LG G3 (VS985)
RBarnett09 said:
Looking for a stock rooted ROM for the latest update. Is one out there anywhere?
Sent from my Verizon Wireless LG G3 (VS985)
Click to expand...
Click to collapse
Just want to make sure, are you looking for firmware on your LG G3 or the Verizon Galaxy SIII?
Here's the Verizon Galaxy SIII VRUDNE1 4.4.2 OTA. Flash with Odin.
SlimSnoopOS said:
Just want to make sure, are you looking for firmware on your LG G3 or the Verizon Galaxy SIII?
Here's the Verizon Galaxy SIII VRUDNE1 4.4.2 OTA. Flash with Odin.
Click to expand...
Click to collapse
For the S3. Need to flash back to a stock ROM on my dad's S3. He wants to keep root and all.
I can't flash in recovery just as every other ROM? I rooted his phone a long time ago. Unlocked bootloader and all.
Sent from my Verizon Wireless LG G3 (VS985)
RBarnett09 said:
For the S3. Need to flash back to a stock ROM on my dad's S3. He wants to keep root and all.
I can't flash in recovery just as every other ROM? I rooted his phone a long time ago. Unlocked bootloader and all.
Sent from my Verizon Wireless LG G3 (VS985)
Click to expand...
Click to collapse
There is no 4.4.2 VRUDNE1 stock rooted rom unless you've already accepted the 4.4.2 OTA and are currently using Safestrap. There is only the stock Odin file that wipes and one that does not wipe the phone. Since the phone has an unlocked bootloader, the only stock rooted rom he could flash would be a custom rom like Old & Slow's Mostly Stock 4.3 rom.
4.4.2 requires locked bootloader and can not be unlocked, nor can it be used on firmware before 4.4.2.
Sent from my SCH-I535 using Tapatalk
SlimSnoopOS said:
There is no 4.4.2 VRUDNE1 stock rooted rom unless you've already accepted the 4.4.2 OTA and are currently using Safestrap. There is only the stock Odin file that wipes and one that does not wipe the phone. Since the phone has an unlocked bootloader, the only stock rooted rom he could flash would be a custom rom like Old & Slow's Mostly Stock 4.3 rom.
4.4.2 requires locked bootloader and can not be unlocked, nor can it be used on firmware before 4.4.2.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
Another one is ScottsRoms.com (have to find it on the site though, easy to navigate, under "archived devices")
4.3 rooted unlocked boot loader.
Sent from my SCH-I535 using XDA Free mobile app