Hi everyone!
I have some issues with Gnabo V4 on my N8010 I didn't have with the previous versions.
My device is rebooting anytime, without any reason.
Sometimes, everything works fine for hours and sometimes I have several reboots every 2 minutes. (sometimes playing a game, sometimes browsing...).
Furthermore, sometimes my device is extremely slow and I need to reboot it to have it running well.
Do you have any idea to fix it ?
I hesitate to reflash it but I don't want to wipe all and reinstall all again...
Thank you
I just flash the new V5, and so far it seems working fine right now
Maybe I just needed to flash the rom one more time but with the V5 I didn't need to make a full wipe
Related
Ever since I got ARHD on latest .24 its been running super fast with minimal problems. One problem I am having is the internet disconnecting randomly and having to turn wifi on and off for reconnect. Also when it is connected it is incredibly slow and other devices on my network are having no problems. How do I fix?
Also I updated to the latest ARHD last night and having more problems than ever so that did not fix.
Try latest guevor kernel, it will fix it.
And do I just flash it after flashing ROM?
Flash the ROM, let it reboot normally, then go back into CWM wipe cache and flash Guevor's. It changes wifi protocol to Veno from Reno whitch helps alot.
I'm still having problems with wifi. Speedtest app is saying I'm getting like 5mbps down yet webpages are taking up to 15 seconds to load and when I look at the wifi bar on the bottom the arrows that indicate data usage sometimes just disappear and the page stops loading for 10 seconds. Same thing for youtube videos. It is taking forever to buffer even on non HD quality. All the other devices on my network are having no issues and everything loads snappily.
Kernel maybe?
You may be having problems with an incompatible kernel[if you did flash an alternate one] or it may just be a bad flash.
Either way, try re-flashing the ROM
The thing is ive had the same problem on other roms and I have tried reflashing.
Edit: I am using the test series of kernels and its the one that is compatible with Megatron. Any other ROM suggestions? The stock Megatron one?
Did you clean or dirty flash? You need to wipe Everything..
I wiped everything
Try using the superwipe script from the ARHD thread, then flash Guevor version 17c on a Non-AOSP Rom (Revolver or ARHD) See if that'll do it.
And if I titanium backed up all apps and data is that good enough? Also if I do a backup in cwm can I restore to my same state I'm in?
Also if I run super wipe script will I not have to wipe caches and stuff?
Yes you can, personally I'd just backup the apks.
Wipe caches anyway never can be too safe.
And the wifi is still not fixed
Guevor 17c?
Yup
When I click on a link you wait a while until anything happens and any data is exchanged. And my sd still won't mount in CWM
Your issues are starting to sound hardware related... :/
I already RMA'd this thing once because it did a never awakening SOD before I was rooted. I'm trying to figure out how to flash stock ROM/kernel to see if problems persist while keeping root.
They may or may not X.x It all depends on which demons are currently inhabiting your TF.
Try the latest Harmony kernel, that might fix wifi.
Thanks for all the help greatly appreciated.
I did some "scientific research". I loaded squarespace.com on my tablet and it took 27 seconds. Loaded same page on laptop and it took 5 seconds. I waited for it to be fully loaded. If I do speedtest.net on my tablet I get the same speeds as on my computer but the only difference is a huge lag time before any loading happens and then while its loading it pauses multiple times. If I have had this on every single kernel/ROM combo I have tried is it safe to call this hardware?
Hello I installed yesterday seanzscream 4.1 hydro rom for jellybean with update 4.1a.
The install went well but I have alot of bug. Well first thing is that it has short freeze really often like it was loading big thing often.
Second is that my wifi keep bugging, It's telling me Im connected but I dont have internet. I have to reboot to make it work.
And the last thing is that sometime I can erase what I wrote, I have to click where I was and try to backspace about 2-3 time.
All those thing wasnt there before I got the custom rom.
any fix ? or maybe you know a fully working rom ? thanks!
I have used the megatron ROM for nearly a year and when i tried to upgrade to one of the RaymanFX's CM10(v7), i had lot of issues.
the ROM worked as it was supposed to work but as soon as i keep the tablet in sleep mode and wake it up in few minutes, the system becomes unresponsive. i tried many different ways to install it but it didnt work. I even used superwipe lite but that also didnt seem to work.
I used superwipe full and nd now the rom wont boot up!!
Please help..!
konark500 said:
I have used the megatron ROM for nearly a year and when i tried to upgrade to one of the RaymanFX's CM10(v7), i had lot of issues.
the ROM worked as it was supposed to work but as soon as i keep the tablet in sleep mode and wake it up in few minutes, the system becomes unresponsive. i tried many different ways to install it but it didnt work. I even used superwipe lite but that also didnt seem to work.
I used superwipe full and nd now the rom wont boot up!!
Please help..!
Click to expand...
Click to collapse
Did you try flashing another kernel? I have RaymanFX's CM10 v6 installed and flashing KAT kernel #70 lidpatch seems to have solved my problems.
Hello everyone, has stated, i have a n8013, i installed gnabo rom v5 and v6 t8 check it out, everything is smooth but one thing, everything related to play videos jumps frames, jumpy videos, local or streamed
Is there a way to fix it? I would like to jave 4.4.4 and have a good video quality, smooth and all
Cheers
I have a 8010 with latest Gnabo and no problems at all with video or streaming ... did you install coorect? Wiped everything?
Perhaps you should change recovery, I use latest CWM working great ...
Markus.
Yes, i installed everything correctly, no errors.
Has for recovery i use high on Android, never had problems with it
Any other thing i could do?
Cheers
Same here
Having the same problem
Hope there will be a solution soon
Gnabo rom on n8000
I have a n8000 with latest Gnabo and have an issue with wifi not connecting.Im trying to use wifi fix for n8013 bt my tablet is stuck on installing data wifi files. I use latest CWM .Can sumone please assist:good: as i use wifi @ home and office. Data is gonna kill me.
farhaanwireless said:
I have a n8000 with latest Gnabo and have an issue with wifi not connecting.Im trying to use wifi fix for n8013 bt my tablet is stuck on installing data wifi files. I use latest CWM .Can sumone please assist:good: as i use wifi @ home and office. Data is gonna kill me.
Click to expand...
Click to collapse
Use the leak kernel and the wifi fix.
Hello!
I was using the SungSonic ROM for almost a year now and I decided to change it today. So I flashed a CyanogenMod Nightly build for the P3100 This morning.
It booted up fine, and there were no issues in the beginning.
But then it started disconnecting calls randomly. Like, Someone calls, The phone rings for a second and boom! It shows a missed call.
I figured rebooting it would fix it but it made my problem only worse.
It now barely shows any Network service at all. If it is there, only for about 20s before it goes back off.
Is there any way to fix it without flashing another ROM? I like CyanogenMod and plus, its for my mother and I prefer keeping it simple.
Also, keep in mind that my Tab does not get recognised on any PC with any Cable I could find.
So, I am stuck with PhilZ Recovery for the P3100.
If the problem can be fixed via Flashing a new Mode/Baseband then please, give me a .zip for only the modem and not the whole ROM.
Thank You for Reading and I will hope you guys help me out.
Regards,
Shinichi Reshima
Always do a nandroid B/U before you flash so if you run into a problem like this you can go back. CM nightlys are not always stable, and sometimes you can't use them unless you have the base stable version of that ROM already installed. Must try and install the base version of the build, it may fix your problem. I run CM11 by Android Andi with no issues and no nightlys.
Pp.