Related
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Go into recovery mode by first switching off your device. Then press volume up, down and power button all together to go into recovery when light flashes. Then you can try flashing stock rom and see what happens after that
OR
follow this guide
http://d-h.st/pt2
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
Hey Just Go to Recovery Mode Again and Do a Data Reset...
Thats all..
If you have bricked your phone you can flash it using sp flash tool with the stock rom.
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
I had the same probelm!!
iBrickYouNot said:
I successfully installed the [IndiAndroid](http://forum.xda-developers.com/showthread.php?t=2000453&page=7) through CWM (it showed the words successful and completed) but now when I boot into normal mode it just hangs at the start screen "SUPERFONE CANVAS 2".
I don't know how else to get to the recovery mode for this phone [Micromax a110] except through MobileUncle app but the phone won't start. Any help appreciated...
Click to expand...
Click to collapse
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
mayur.3.92 said:
hello everybody
sorry if have done anything wrong by starting or posting in wrong thread.......really apologies for that...
I have purchased micromax a110 and every thing was fine with that phone.i even flashed it to v2 ROM and things were fine even then(only problem i observed was with display having light faded up images of previous things displayed....don't know but feel may be due to screen refresh rate)
Yesterday i happened to find [MICROMAX A110] ROM of Mobistel Cynus T2 http://forum.xda-developers.com/showthread.php?t=2060482
did as things were mentioned in post and everything was good and smooth
i then thought of reverting back to V2 ROM and flashed A110 with Sp flash tool,flashed correctly and phone was running normally........but i saw the options in sp flash tool and selected memory test option and selected all options and started the test after test finished i was not able to start the phone........ i then again flashed with v2 ROM and it started but iam getting invalid imei and NVram warning as WiFi network please help me to resolve this ......phones working properly but shows imei invalid and WiFi network i tried to root but cant even root the phone now
Click to expand...
Click to collapse
Write ur imei by own.. how plz visit dis linkandroidforums.com/a75-all-things-root/542716-how-unbrick-a75-if-bricked-using-recovery.html
Sent from my Cynus T2 using xda app-developers app
Thanx but what about no am error being showed up as open wifi network
plz help stuck at recoverymode
imridul said:
ALL THE ABOVE METHODS DONT WORK!! I Bricked my phone to..so read on!!
Okay so here is what you have to do!!
1.Flash yourself into CWM recovery& create a backup of your file data as this method will erase everything!!
2.Enter into Advanced options>Mount SD card
3.Copy whichever ROM package you have pre-installed into the SD CARD which is mounted(In my case RADEON ROM*)
And now go to Install option from SD Card>Radeon Rom..and Voila its back from the DEAD!!
P.S: Backup is 100%essential & I'm not liable if you do not backup your data using CWM
Cheers!!
Click to expand...
Click to collapse
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
Flash the Stock V2 via the SP Tool.
http://forum.xda-developers.com/showthread.php?t=1982587 [TUT]MTK Android (Sp flash tool ) tutorial
http://forum.xda-developers.com/showthread.php?t=1960080 check the first post for the Stock V2 ROM
similar issue ,
Let me try what VipinKC says
un brick
ravee1010 said:
similar issue ,
Let me try what VipinKC says
Click to expand...
Click to collapse
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
vjdsivakumar said:
install stock rom by sp flash tool you phone will return to normal link is in down
http://forum.xda-developers.com/showthread.php?t=2167244
Click to expand...
Click to collapse
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
nice
ravee1010 said:
Yes done already!
I put stock JB
rooted it
and installed LEWA v4 by seshu .........it rocks
Now am bulk installing apps .......
Click to expand...
Click to collapse
nice work enjoy
Bricked a110
Guyz, i recently installed CWM on my a110, but somhow while testing the features, i installed 12 mp patch and rebooted the phone. But it got stuck on the boot screen. And then i again went to CWM and done all this:
Fomat Data
Format System
Format Cache
And now its just hanged on to boot screen and am afraid that i have just done the biggest mistake.
Any help will be very thankful..
Plzz Reply Fast...
Similar but Different Problem
I may have a similar problem, big bros. Please check this thread. Sorry for bothering. I really need help.
http://forum.xda-developers.com/showthread.php?p=53004045
use
saadderaiya said:
but if when i go to recovery mode it just hangs how can i backup or tell me how to flash please tell me
Click to expand...
Click to collapse
SP tool and flash stock rom through sp tools
If u have nandroid backtup then restore it
Sent from my A250 SUVI ROM v16 AURA using XDA Premium 4 mobile app
I installed a custom rom sgalaxy.... after installing rom was working fine; untill I press the turn off button to lock my screen it blinked in white n black for few seconds n turned off n wen I press back power button/ try to turn on lock screen..., its not turning on.....
Any solutions?????
mailmyinbox said:
I installed a custom rom sgalaxy.... after installing rom was working fine; untill I press the turn off button to lock my screen it blinked in white n black for few seconds n turned off n wen I press back power button/ try to turn on lock screen..., its not turning on.....
Any solutions?????
Click to expand...
Click to collapse
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
vneogi199 said:
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
Click to expand...
Click to collapse
Thanks for d reply.... I solved the proble... Did same steps u mentioned....
how to flash lk.bin from v1 via sp tools plz help.me
Hey can u plzz help.me I have installed sgalaxy custom ROM on canvas 2 plus but the screen blinks as I lock it and after some time it totally offs plz help with complete steps to fix it plz plz pl pl plz
best solution is to flash whole rom again or try another rom
Sent from my Micromax A110Q using xda app-developers app
I have a micromax canvas 2. my niece played with the patterns and now its locked. And now it has been 18 hours but I cannot find anything. Nor the patterns can be unlocked. Please help.
if your mobile is root and cwm recovery is install just restore your mobile.
kamdarsuraj said:
I have a micromax canvas 2. my niece played with the patterns and now its locked. And now it has been 18 hours but I cannot find anything. Nor the patterns can be unlocked. Please help.
Click to expand...
Click to collapse
you have already posted a thread DO NOT SPAM OTHER PEOPLE'S POSTS WITH YOUR OWN QUESTIONS NOT RELATED TO THE TOPIC
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
Adil Rishi said:
if your mobile is root and cwm recovery is install just restore your mobile.
Click to expand...
Click to collapse
Please give valid solutions :| not stupid ones... he has installed a custom rom... isnt it obvious it is rooted and has CWM?
abhimanyu bajaj said:
you have already posted a thread DO NOT SPAM OTHER PEOPLE'S POSTS WITH YOUR OWN QUESTIONS NOT RELATED TO THE TOPIC
---------- Post added at 07:38 PM ---------- Previous post was at 07:37 PM ----------
Please give valid solutions :| not stupid ones... he has installed a custom rom... isnt it obvious it is rooted and has CWM?
Click to expand...
Click to collapse
so just restore his mobile reinstall the same rom or install another rom.
Adil Rishi said:
so just restore his mobile reinstall the same rom or install another rom.
Click to expand...
Click to collapse
You dont seem to understand the problem... HE WANTS TO USE THE DAMN ROM AND WANTS AN FREAKING SOLUTION ON *THAT VERY ROM*
vneogi199 said:
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
Click to expand...
Click to collapse
After flashing color os 2, once i lock the screen it cant be turned on. Only menu, home and back buttons glow up. Will flashing lk.bin work on this? What are the steps to flash it? Can I us CWM for this?
Plz help me how to flash lk.bin
mailmyinbox said:
Thanks for d reply.... I solved the proble... Did same steps u mentioned....
Click to expand...
Click to collapse
I've also same problem with my screen.
I've installed sGalexy ROM.
I've all required files.
but i dont know how to flash lk.bin file via sp flash
plz help me...
thnx
try factory reset from default recovery. it helped me once. try pressing the power and vol down simultaneously while switched off. it should recovery.
Help ME please
vneogi199 said:
Flash stock v1 via sp tools or flash lk.bin from v1 via sp tools
Click to expand...
Click to collapse
I install a custom rom when the rom is install and it stuck on boot logo and it take 1 hour after tht i remove baatery of my phone and instert battery again after that i push the power button but it not opening i also flash a stock rom v3 but same problem help me plz (mmx a110q )
mailmyinbox said:
I installed a custom rom sgalaxy.... after installing rom was working fine; untill I press the turn off button to lock my screen it blinked in white n black for few seconds n turned off n wen I press back power button/ try to turn on lock screen..., its not turning on.....
Any solutions?????
Click to expand...
Click to collapse
Bro it call deep sleep bug... U need to flash this..
http://d-h.st/FlD
http://d-h.st/tle
Click this links and download the Uboot V1 or Uboot V3
Flash one of this and see... Not work flash another...
mailmyinbox said:
Thanks for d reply.... I solved the proble... Did same steps u mentioned....
Click to expand...
Click to collapse
can you send me lk.bin file plz....i am facing the same problem as u did
Welcome to the Index page of Xolo Q900. Here the record of everything related
to Q900 can be found.
Index
About Xolo Q900
Installing ClockWorkMod
Stock ROM
Custom ROM based on stock ROM(More stable and faster)
MIUI
News
Tips and Tricks(coming soon!)
can you please again post the stock rom for flashing the rom through flashtool i really need the rom to flash my mobile bak to stock rom please
Stock ROM links(updated)
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
stock rom installation error
irfanjunaid said:
Android Version: 4.2.2
Stock ROM in .img format(For flashing via SP Flash tool)
click here or here
Stock ROM in .zip format(For Stock recovery flashing)
click here
Thanks for notifying!!! Please do tell me if something goes wrong, I am here to help you
Click to expand...
Click to collapse
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
soumyaxoloq900 said:
Hi, I have installed Your MIUI custom rom for my q900 and then moved to another custom rom i.e. samsung note 3 rom. But the samsung note 3 rom have some serious bug so I wanted to go back to my old stock rom.
But whenever I tried to install the stock rom [downloaded from : http://forum.xda-developers.com/android/general/xolo-q900-official-stock-rom-t2809199] I got an error message showing "signature verification failure. installation aborted".
For installing those custom rom I have installed the CWM recovery and used that recovery to install the stock rom.
Really have no idea whats going wrong.
Any help will be appreciated.
Click to expand...
Click to collapse
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
irfanjunaid said:
Yes, i can remember myself committing the same mistake! Nothing, just delete a file named checksum.exe... Then try again! Please report back if you still have problems!
Click to expand...
Click to collapse
Sorry for very late reply.
Where Am I suppose to find that file [checksum.exe]?
Is it in the phone [havent searched yet] or is it in the Update package [searched but not found]
Thanks
Soumya
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Darkwell_Habridge said:
I got checksum_gen.exe....i then deleted that file....but no progress....can u please describe in detail cause i am also having d same problem
Click to expand...
Click to collapse
Try deleting checksum.exe, checksum generator, checksum.ini files.
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Darkwell_Habridge said:
I am using sp tool to flash d stock firmware.....i tried deleting cheksum-gen.exe checksum.ini ...n when i tried to download d stock firmware thru sp tool, it shows searching(in d usb portion of sp tool)...n then it gets stuck there....
Click to expand...
Click to collapse
OMG! This problem is not related to checksum. Alright, the problem is due to the absence of driver. You need to install MT6589 preloader drivers inorder to flash roms to MT6589 device. In windows 8, you need to disable driver signature check(google it) to install the driver. Good luck.
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Darkwell_Habridge said:
Ok thats it...flashed d stock rom successfully...n d process wz perfect...n learned some new things. 2..thank u for d help..
Click to expand...
Click to collapse
You are welcome, please don't forget to press thanks!
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
4.2.2 won't support SELinux
kunalsaddar said:
Hi Guys,
Before you guys shoot me down, Just wanted to say, i searched XDA for 2 hours, couldn't find the exact reply. And a few topics are open since a year with no reply, So thinking that someone will reply to me. I am opening this "Need Help" Ticket.
I have a micromax a110 with 4.04 - as i got no update ever! So what i did was
Rooted the phone properly as per the procedure.
Downloaded the CWM 6.0.4.9 recovery [selinux] and flashed it with Recovery Link :http://forum.xda-developers.com/mic...opment/recovery-cwm-6-0-4-9-recovery-t2789175
Downloaded the [ROM][4.2.2] CanvaS5™ V1.1 Link: http://forum.xda-developers.com/showthread.php?t=2775553
After flashing the rom properly, when i reboot the phone, it gets stuck on the boot screen forever. Am i doing something wrong? Should i have flashed a kernel? or something. Please note, i am not looking into going back to stock, as i have moved into the dark side of the root world .
Since i have just been a Read-only user of XDA for all this while(more than a year), with no posts ever, i cant request for help on the Developer Thread as it requires privileges. Requesting someone to please post this topic there so i can speak to the dev or please give me a answer to help me:silly:
Click to expand...
Click to collapse
That Recovery you flashed is SELinux enabled and is not supported by 4.1-4.2.2 Jelly bean Roms so you have got boot loop . You can try other recovery or flash higher android version roms .
---------- Post added at 05:20 PM ---------- Previous post was at 05:06 PM ----------
I think this CWM recovery will work with your downloaded rom
http://forum.xda-developers.com/showthread.php?t=2204785
And remember before flashing anything clear data,cache and dalvik-cache.
Happy Flashing
Thanks guys for the reply, let me flash the above CMW and check. Will revert shortly
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
kunalsaddar said:
How to i put the CMW in the phones root directory now for it to flash? The phone doesnt start so cant access it through usb. Any ideas?
Click to expand...
Click to collapse
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
4shreyas said:
Since your phone is not booting you should use SP Flash tool on PC to flash the recovery. Here's a guide to SP Flash tool:
gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/
Hope it works .
Click to expand...
Click to collapse
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
kunalsaddar said:
Thanks dude, for your quick response. I wont be able to confirm on this today as setting up SP Flash tool is just too hard. It talks about some scatter file. I dont know how to make that.Let me get a grip on that, will confirm then. Thanks for the help anyhow
Click to expand...
Click to collapse
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
4shreyas said:
Great , Here the link for official Jelly bean update for your device by micromax as said in that post . I think that file has scatter file (it contains your phone's storage partition info ) . There is also guide to flash using SP Flash tool . Use it .
http://forum.xda-developers.com/showthread.php?t=2209288
Hit Thanks if it works
Click to expand...
Click to collapse
Hey shreyas,
I have tried it with SP tools, it doesnt work, man. Drivers, Softwares, updated all of them, i keep doing everything. I know i am doing something wrong, but its hard to identify, spent like the entire night trying to make it. Can't i get a flashable zip for CMW instead or know that on which rom did the CWM selinux work on? This boot looping is now killing :fingers-crossed:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
kunalsaddar said:
Finally, i found a way, thanks 4Shreyas for all the help. Gave me knowledge and helped me identify the errors.
I couldn't flash the rom or the cmw recvoery through the pc as the drivers for SP tools never worked on my Win 8.1 x64. Finally applied the stock jellybean file from http://forum.xda-developers.com/showthread.php?t=2160609 . It updated my CMW since that was the problem i was stuck in bootloop.
After that i flash the phone with my desired rom.
In the end, all good:laugh:
Click to expand...
Click to collapse
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
4shreyas said:
Cheers bro !!!! Yes getting MTK drivers in win 8 is a challenging task and as SELinux CWM recovery is concerned you can flash 4.3.x and 4.4.x roms . Google it , if any rom is available then use that recovery to flash those roms .
Enjoy !!
Click to expand...
Click to collapse
True that, i actually gave up trying to find the drivers. There arnt any 4.3 or 4.4.x roms released for mmx. When they do, will surely apply the Selinux CWM. Thanks for all the help .:good:
Lots of people were asking to build a cwm for iris x1...well now guys ur cwm is ready...
Thanks to patenpisan,ajaz35,n but obviously me ...
Procedure to flash recovery:-
1)root your mobile.. (If you don't know what is rooting then u should google it first)
2)download flashify app from play store.
3)give the app root permission.
4)backup your current recovery & boot.img through it.(*important)
5)now go to flash option & select recovery there...the window will pop-up asking to choose a file or dwnld custom recoveries...
6)select choose a file...browse n select your downloaded img....
7)then select file way...
8)nw app will ask you whether to flash file or not....click yup! There..
9)Taaaadaaa....reboot your phone to recovery by pressing power button+volume down (power button first when mobile will vibrate immediately press volume down)
10)nw u successfully flashed cwm on iris x1
What's working:-
*All
If anyone finds a bug rather Dan screen blinking(*I mean when we reboot our phn to cwm n scroll down the menu will divided n wen backing up ROM or flashing or anything the screen blinks n not so stable) den post it..we will clear DAT bug...
#DOWNLOADS:-
Attached file is there!!
#THANKS TO:-:angel:
Me
Ajaz35
patenpisan
Thanks vedang for updating on XDA
Don't fix root permission with this cwm otherwise u will lose root
Thanks a lot team dev xda... It's working properly for me... Thanks :thumbup:
ajaz35 said:
Thanks vedang for updating on XDA
Don't fix root permission with this cwm otherwise u will lose root
Click to expand...
Click to collapse
Nthng like dis...DAT option only come wen u flash any file..i.e ROM if u want prerooted ROM den fix root permission..[emoji6]
tanmoy
ULTRAvEdAnG... said:
Lots of people were asking to build a cwm for iris x1...well now guys ur cwm is ready...
Thanks to patenpisan,ajaz35,n but obviously me ...
Procedure to flash recovery:-
1)root your mobile.. (If you don't know what is rooting then u should google it first)
2)download flashify app from play store.
3)give the app root permission.
4)backup your current recovery & boot.img through it.(*important)
5)now go to flash option & select recovery there...the window will pop-up asking to choose a file or dwnld custom recoveries...
6)select choose a file...browse n select your downloaded img....
7)then select file way...
8)nw app will ask you whether to flash file or not....click yup! There..
9)Taaaadaaa....reboot your phone to recovery by pressing power button+volume down (power button first when mobile will vibrate immediately press volume down)
10)nw u successfully flashed cwm on iris x1
What's working:-
*All
If anyone finds a bug rather Dan screen blinking(*I mean when we reboot our phn to cwm n scroll down the menu will divided n wen backing up ROM or flashing or anything the screen blinks n not so stable) den post it..we will clear DAT bug...
#DOWNLOADS:-
Attached file is there!!
#THANKS TO:-:angel:
Me
Ajaz35
patenpisan
Click to expand...
Click to collapse
Not working black screen problem
santunu said:
Not working black screen problem
Click to expand...
Click to collapse
Can u explain how u flashed
Your build no.
I
---------- Post added at 01:00 AM ---------- Previous post was at 12:55 AM ----------
ULTRAvEdAnG... said:
Nthng like dis...DAT option only come wen u flash any file..i.e ROM if u want prerooted ROM den fix root permission..[emoji6]
Click to expand...
Click to collapse
But we are already rooted and these binaries mess up with already existing binaries
So don't fix root permissions.
---------- Post added at 01:07 AM ---------- Previous post was at 01:00 AM ----------
santunu said:
Not working black screen problem
Click to expand...
Click to collapse
Give your cwm flashing procedure n Also give build no.
santunu said:
Not working black screen problem
Click to expand...
Click to collapse
How u flashed it?
Don't use fastboot method...I mentioned procedure...go with that procedure....!!
custom recovery
Dude I liked your recovery .
bole to ekdam mast.
5 stars to recovery.
Now please build up custom ROM for Iris X1, like any..... Please
Thanx for cmw recovery for lava iris x1...Can u Do custom rom for lava iris x1...I love MIUI v5 Rom..Can u do custom MIUI v5 rom for lava iris x1
Cool update..thanx again
tanmoy
ULTRAvEdAnG... said:
How u flashed it?
Don't use fastboot method...I mentioned procedure...go with that procedure....!!
Click to expand...
Click to collapse
Still same problem WhatsApp me 9612324233 plz
tanmoy
I am successfully flash the cwm and go the recovery mod
but there is a problem when I try to backup or anything else on cwm mod the screen is divided (what should I do sorry I don't know English properly). every time on cwm mod screen is divided two part
santunu said:
I am successfully flash the cwm and go the recovery mod
but there is a problem when I try to backup or anything else on cwm mod the screen is divided (what should I do sorry I don't know English properly). every time on cwm mod screen is divided two part
Click to expand...
Click to collapse
that is the only graphical glitch in the cwm
But it is working fully.
U an use it until the issue is fixed.
tanmoy
OK bro but how many days to fix it
santunu said:
I am successfully flash the cwm and go the recovery mod
but there is a problem when I try to backup or anything else on cwm mod the screen is divided (what should I do sorry I don't know English properly). every time on cwm mod screen is divided two part
Click to expand...
Click to collapse
same happend in my case!!
EonJone said:
Thanx for cmw recovery for lava iris x1...Can u Do custom rom for lava iris x1...I love MIUI v5 Rom..Can u do custom MIUI v5 rom for lava iris x1
Cool update..thanx again
Click to expand...
Click to collapse
If u r bored of ur normal ui...den u can try our first custom ROM....
ULTRAvEdAnG... said:
If u r bored of ur normal ui...den u can try our first custom ROM....
Click to expand...
Click to collapse
Thanx for info ..When u guys releasing it? ??
Sent from my iris X1 using XDA Free mobile app
tanmoy
Hi bro graphics problem are solved or not
Can u guide how to solve graphic problem ????
can anyone help me. phone not booting after installing stock ROM using multibootloader.
Can I flash this CWM using multibootloader?