Im wondering if anyone has gone from the Desire Z to the Galaxy S Relay 4G in Europe.
I ask for Europe to make sure it is compatible with most networks over here.
I see there is even ROM development over here with 4.4.4 running I imagine codename "Android L" will probably run as well
Thank you for the comments.
A few have had posts in the q&a or maybe general section, there aren't many posts at all here so I'm sure with minimal effort you'll find the ones I'm referring to
Sent from my Nexus 4 using XDA Premium 4 mobile app
riahc3 said:
Im wondering if anyone has gone from the Desire Z to the Galaxy S Relay 4G in Europe.
I ask for Europe to make sure it is compatible with most networks over here.
Thank you for the comments.
Click to expand...
Click to collapse
I went from Desire Z to Galaxy S Relay, it works well in Norway.
You need to unlock the phone from T-Mobile, see this thread http://forum.xda-developers.com/showthread.php?t=2255892.
Be aware that this phone is not enabled for 4G (LTE) network, only 3.75G (HSPA+). HSPA+ is marketed as 4G in USA, not in Europe.
raphaelcno said:
I went from Desire Z to Galaxy S Relay, it works well in Norway.
You need to unlock the phone from T-Mobile, see this thread http://forum.xda-developers.com/showthread.php?t=2255892.
Be aware that this phone is not enabled for 4G (LTE) network, only 3.75G (HSPA+). HSPA+ is marketed as 4G in USA, not in Europe.
Click to expand...
Click to collapse
3G works in Norway too?
I think by frequencies sadly 3G wont work here where Im at A shame.
900 MHz 3g doesn't work!
I upgraded too from Desire Z to Relay, didn't even realize any 900 Mhz problem. I get always an H or E icon (HSDPA or EDGE), so 900 MHz should be working.
According to specs, the phone should work with these networks:
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 850 / 1700 / 1900 / 2100
I have it in Telekom in Slovakia and in the meantime I travelled to NY and got no problem at all (I had it set to manual network selection to save roaming charges).
The phone I bought via ebay was locked (even the seller described it as unlocked) but after firmware downgrade I easily unlocked it. I recommend LiquidSmooth ROM, you'll fall in love with that phone!
My other finalist was Moto Photon Q, it supports GSM but lacks SIM card slot. If you want, there's a guy in Prague, the author of the sim card mod instruction post on xda, that can do it for you. But I chose the easier way. Now I have a small problem with display flex cable (probably too much openings/day) so I'm considering buying another Relay before they're gone with no decent qwerty phone around. And I can leave the current one for spare parts. I had to put away my DZ because of the keyboard. Some keys started to write several characters instead of one and there was no easy way to fix it.
FYI ebay deals in your name with customs, so they charge you immediately and the phone is delivered to your door without customs holding it for a week.
If you wish to
T699 in the UK
Hi.
I did not owed the HTC, I used an Xpreia Pro prior to my S4 Relay. However I have the S4 relay for almost 1 year and I had no problems using it in the UK. I have traveled in Europe (France, Germany, Austria, Hungary, Romania) and I was able to use it without any problems. AFAIK it works just fine on 900 Mhz but in 2G. The big question is what freq of 3G is your network provider using. For example, in UK I'm on EE network which is using 2100 Mhz for 3G and 1800 Mhz for 2G so the device works perfectly. Ifyou are on Movistar Spain than your phone will work fine, since the company is offering 2G on: 900/1800 MHz (both supported by S4 relay) and 900/2100 MHz UMTS ( from which 2100 is supported by the device). In very simple translation 2g will work everywhere without any problem, it might happen that is some places you will not get 3G signal.
Hope it helps.
Emil
Related
Hi everyone. I’m currently living in the UK and I’m interested in the Samsung Galaxy S (i9000). Unlike in the USA, there’s only one variant and its quite expensive. Much cheaper in the USA! So I’ve been looking at the Samsung Captivate, AT&T’s Galaxy S variant.
Network
Samsung Galaxy S –
2G Network
GSM 850 / 900 / 1800 / 1900
3G Network
HSDPA 900 / 1900 / 2100
Samsung Captivate –
2G Network
GSM 850 / 900 / 1800 / 1900
3G Network
HSDPA 850 / 1900 / 2100
2G is exactly same band, but 3G is only 50MHz difference.
Will both 2G and 3G networks work fully in the UK?
Software
Am I correct in thinking I can remove the AT&T bloatware by flashing a custom ROM?
Can someone please suggest a good, fast lag-free 2.2 Froyo ROM?
Android Market
Am I correct in thinking I can use Market Access to change US market to UK?
Thanks for help in advance
you are confused on the 3G bands.... "only 50Mhz difference" statement is meaningless - if bands are not exact, then it won't work - period.
Having said that, the captivate will work in the UK - the 1900/2100 bands are 3G in US (ATT) and UK. You will get 2G and 3G.
alphadog00 said:
you are confused on the 3G bands.... "only 50Mhz difference" statement is meaningless - if bands are not exact, then it won't work - period.
Having said that, the captivate will work in the UK - the 1900/2100 bands are 3G in US (ATT) and UK. You will get 2G and 3G.
Click to expand...
Click to collapse
Thanks for that.
What about the android market? Can I change it to UK using "Market Access" app?
Also, seeing as for 3G the first band is different (900 vs 850) will it have any affect on my 3G network connection?
The Captivate is a World Phone, meaning it will work around the world. If one 3G band doesn't work, you have 2 others, which you have already been told will work just fine
Sent from my Captivate
bilalbilal said:
Thanks for that.
What about the android market? Can I change it to UK using "Market Access" app?
Also, seeing as for 3G the first band is different (900 vs 850) will it have any affect on my 3G network connection?
Click to expand...
Click to collapse
Yes, you should be able to use the Market Access app, but it takes a carrier code, not a country code. Using the phone with another SIM may set it automatically.
As for bands - you will probably find some areas where 3G is offered on a band you don't have - it is possible, but shouldn't happen any more often then if you had 900 on the phone. I took my iPhone all over EU - it was an ATT iPhone, and it worked fine with 3G. The Captivate should do just as well.
Thanks for the help guys
Not only can you flash custom ROMs, but the SetiroN kernel lets you flash regular Galaxy S ROMs onto the Captivate. If you look in the development forum here, you'll see that there's basically only one native Captivate custom ROM (Cognition); the rest are all Captivate-flavored Galaxy S adaptations using SetiroN (or its predecessor).
Sent from my Voodoo-powered Fascinate with XDA
I'm looking for some advice on what new phone to buy. Here is my situation. I would like to buy a phone that will work on the Bell network with 3G (high speed network) AND also work in Europe with 3G speeds.
I would prefer an Android device so it looks like i'm limited to the HTC Desire Z and the Samsung Galaxy S Vibrant. But as far as i understand both of these phones don't have UMTS 2100 frequency to get 3G in Europe. Do I just suck it up and use EDGE in Europe or do something else?
What do you recommend?
I travel a lot so I have a special prepay simcard for travel. At the moment I'm using a i9000 Galaxy which has 850, 900, 1800, 1900 MHz GSM & 900, 1700/2100, 2100 MHz UMTS bands.
However, I still have an unlocked DroidPro (XT610) and not sure whether to take it with me traveling. Unlike the galaxy the Pro has CDMA and also is similar in potential to the Galaxy with it's hardware, especially with a better battery. A very good thing for me is that possibly it looks a lot cheaper than the galaxy.
But the DroidPro has very poor community support and Motorola make it difficult for custom ROMS. The other problem I find is the keyboard doesn't always play well with Android.
The thing is, the DroidPro has CDMA and UMTS 1900 band coverage instead of 1700. Is this better global coverage or not? What are the advantages of CDMA? Do I need a new simcard to use CDMA?
The DroidPro also has "EV-DO Rev.A" whatever that is for data... I wonder if that might help me get data services with a local simcard in some places.
It's probably only a matter of $120 to sell the DroidPro... should I keep it?
Here's a list of countries with CDMA if you're interested:
http://en.wikipedia.org/wiki/List_of_CDMA2000_networks#Countries
As far as I can see there isn't anywhere without GSM coverage, but there could be a place where CDMA is the only prepay local simcard option.
Your phone can be used in many countries with GSM coverage since your phone is a world phone and uses SIM cards. The only network I got sure know it won't work with is T-Mobile USA since it uses the 1700 band.
Sent from my GT-N7000 Samsung Galaxy Note "Go big or go home" using XDA app
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
MarrkDaviid said:
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
Click to expand...
Click to collapse
Do not rely on GSM Arena those guys are rookies.
The Rogers RAZR HD has LTE 700/1700/2100 via the rogers website.
MarrkDaviid said:
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
Click to expand...
Click to collapse
XT925: (international)
Secondary Cellular Networks: LTE700 (B17), LTE1700/2100 (B4), LTE1800 (B3), LTE2600 (B7), LTE800 (B20)
From what I've read, B3 is Australia's LTE band, so it is supported, but it might be turned off in roger's radio.
Have you tried installing the firmware for Telstra? It's available here: http://sbf.droid-developers.org/van...25_A045_WIG149790_Service1FF_fastboot.xml.zip from this thread: http://forum.xda-developers.com/showthread.php?t=1943879 Maybe switching to your provider's firmware will fix the LTE issue.
Hi
Can you please provide an update. Did you manage to flash the Testra fw and latch in to the LTE 1800 band?
Coz i would like to buy a phone and do the same thing as you. I would not buy if you did not suceed.
MarrkDaviid said:
Hey Guys,
I have a Motorola RAZR HD XT925 which was sourced from Rogers Canada. I was wondering how I can check the devices LTE frequencies? Is there any engineering code and/or menu that would assist with this? This device apparently supports LTE 800 / 1800 / 2600 or LTE 700 / 800 / 1700 / 1800 / 2600 according to GSM Arena. I am wanting to use the LTE 1800MHz frequency in Australia, though cannot get it to connect.
I have tried the following:
Searching for networks manually / letting the device select them automatically
Toggling between 3G only and Automatic (4G/3G/2G)
I definitely have the correct APN settings configured (for Telstra in Australia)
Data is enabled, the SIM card connects to 4G in another mobile
Any assistance would be appreciated, in finding out which LTE network frequencies this device supports.
Click to expand...
Click to collapse
Hi. This is a good source here in Australia. Hopefully is updated and current. http://whirlpool.net.au/wiki/mobile_phone_frequencies
Note, however, that LTE is really new here and not yet well implemented. I live in Sydney, but I'm outside of the LTE network at home. I'd have to travel closer to the business district to get it. I think its implemented around the airport as well. LTE is still a work in progress and Telstra is ahead of the game with the other telcos, but you're going to want to be able to connect to their "Next G" or 3.5 G to fallback on otherwise youre going to get 2G.
In any case, you want to make sure your APN settings are correct as well. There is loads of misinformation about that. You can have Telstra set them for you (or at least it worked on my Galaxy S2, haven't tried with this phone since I got it from their store). Try this link and see if it the correct one: http://www.configure.telstra.com.au/telstra/index.jsp
On my Galaxy S2, I had read lots of documentation and had things working but found that after going through a Telstra automated thing (I think the above link), that it set my APNs for me and I ended up with better speed and signal.
Just found this from their site as well concerning their 4G and 3G frequencies: http://www.telstra.com.au/mobile-phones/coverage-networks/networks/
The 2100 frequency on their 3G or NextG (3.5G) may have been turned off at this point; I don't remember. They may still be using it for legacy phones and people on bring your own phone plans but I beleive they had wanted to either shut it down or sell it to another carrier. I don't recall that my SGS2 got 850 ... I just noticed there's tabs on the Telstra page that explains their coverage. Click on them and that's more accurate than what I just typed
I suspect your problem is that you may not be in an LTE covered area. Either that or its your APN settings. Let us know how it goes.
EDIT: Sorry, I didn't read your post properly that the SIM works in another device. If it isn't your APN settings, you can take it to a Telstra store and ask them if they know what the problem is. On occasion they do know what their talking about. You can point them at this web page if need be and it might encourage them to look a little deeper:
http://www.morecellphone.com/compar...d-xt925-vs-motorola-droid-razr-hd-xt926/39060
[
pandabear said:
Can you please provide an update. Did you manage to flash the Testra fw and latch in to the LTE 1800 band?
Click to expand...
Click to collapse
I no longer have this device, and unfortunately never tried flashing the Telstra firmware on the device.
PantsDownJedi said:
you can take it to a Telstra store and ask them if they know what the problem is. On occasion they do know what their talking about.
Click to expand...
Click to collapse
The device that I had was sourced from Rogers Canada, and didn't support LTE 1800MHz out of the box. They wouldn't have been able to help.
PantsDownJedi said:
The 2100 frequency on their 3G or NextG (3.5G) may have been turned off at this point; I don't remember. They may still be using it for legacy phones and people on bring your own phone plans but I beleive they had wanted to either shut it down or sell it to another carrier.
Click to expand...
Click to collapse
Telstra's 3G 2100MHz network was part of 3GIS, an agreement between Telstra and VHA, which ended on August 31st. Telstra still uses the 3G 2100MHz network frequency, it is actually part of their Next G network now, they however do not advertise this, as very few sites are still using this network frequency, and it is far more important to have a device that supports 3G 850MHz. Telstra lost quite a few 3G 2100MHz sites when 3GIS closed, although all of the areas would have had 3G 850MHz anyhow, so it was not really a big deal.
hi just purchased a USA htc win phone ,does anyone know if 4g will work in UK ,if so witch provider cheers
no body tried then
not much happening here then
Not sure
I have just bought from USA a HTC One M8 T-Mobile 0P6B140 which I have unlocked. It is working fine but although it shows it is on Vodafone UK 4G, using the app NET CHECK it reports 3G HSDPA/HSUPA 57mbit. The only thing that I haven't got working is MMS. I have entered the APN details for my contract Vodafone sim which I found on the net, and there are various, but it tells me it cannot send and to contact mobile op. for settings.
As for the 4G, I live in a rural area it may be that Vodafone are transmitting on band 20 (800 MHz) and this phone doesn't support that. Vodafone only have the 800 and 2600 frequencies, band 7 and 20. My phone uses 3 (1800), 4 (AWS). 7(2600), 13 (not sure). I might be wrong with these.
Overall I am pleased, the phone is superbly built and it gives me something to think about!
I have the mms working fine, it was just the APN/MMS settings. So it is just the 4G not working but I can stream video from my synology ds214play with the 3g HSDPA/HSUPA.
Hi, LTE support depends on which carrier version you are bringing to Europe. My Verizon version did not work because it supports only "non-European" LTE Bands.
Now that I am using the AT&T version I can use full LTE in Europe (except the 800mhz band, which doesn´t matter for my country).
Be also aware that AT&T and obviously T-Mobile change the firmware so the phone will display 4G when in reality it is on 3.5/3.75G and LTE when it is on real 4G.
Cheers,
T.