Database Info

Solution for Micromax A110 not charging or dead after Jelly bean update

Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.

thanks
thank you very much. you really saved me from a major major trouble.
regards..
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse

ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Good luck guys.
Click to expand...
Click to collapse
Dude... i was pulled out from my jeopardy big time.... cheers!

valentine86 said:
Dude... i was pulled out from my jeopardy big time.... cheers!
Click to expand...
Click to collapse
me too.. what i did was i pull out the batt. then push the power btn until you can see a fade charging icon. then I just leave the charger on the phone for like 3 hrs... fluke or not, the phone is ok again.. thank god..:victory:

Dead battery?
EDIT:
You are a lifesaver! I have a shattered camera glass and heavily modded phone, and dreaded visiting the service center. This fix worked perfectly!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is the screen you're talking about, right?
I've kept the on button permanently pressed thru a knot and counting the minutes now. Perhaps I'll let it be through the night.
Hope this gets resolved.

I had the same problem.. What I did was that... I have connected the phone to pc via usb... After about 10mins the phone booted up... I'm using suvi rom
Sent from my Micromax A110 (Canvas 2) using xda premium

ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
Thanks dude.. :thumbup:
But k have no issue after jb update
Sent from my Cynus T2 using xda premium

thank you
thanks a lot....it worked for me

thanks
happy....:laugh::laugh:

i have this problem from yesterday.
i flashed JMP V5 jelly bean rom. after this my phone stopped charging. whole night i kept it on charge but no use. my phone is totally dead.
when i connect charger with adopter, it shows blue battery sign that it's charging but it doesn't charge at all.
i tried your solution. there is green battery sign keeps on flickering till the time i keep holding power button. i kept holding power button for almost 6 minutes but no use. it doesn't boot.
i tried it already 3 times.
any other suggestions?
EDIT: i just been to Micromax service center. when they changed the battery my phone started working but when the service tried charging for 10 minutes, charge was not increasing at all.
he said there is problem called "dummy charging" with motherboard. they need to replace motherboard. it will take 10 days to get this part. let my phone there for repair.

It worked
It worked... thanks mate!

thanks
thanks.......

I too faced the same problem before. I charged my battery with an external charger and it worked just fine.

Thanks
Hi,
I registered on xdadevelopers just to thank you for this tip. It saved my phone.

Patch available for Battery issue
Dear All,
Mr. JigarPatthani has already released the patch for it. I normally use his ROMs for my MMX A110. So please use it.:good:

fix not working
i tried the above procedure.. my phone just reboots after the after i hold the power button for 5-10 seconds.. instead of of the battery flickering... help.. and i observed that the battery charge increases after reboot .
thanks in advance

Thanks !!!
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
Thanks so much!!! I was dreading to go to the service centre....

Is this problem still exists with the newer version of micromax JB ?

Micromax a110 NOT CHARGING...!!! :crying:
My MMX A110...is not charging...
i don't know.....which rom...
but i remember...that...i flashed a rom.....
and after flashing that rom...this problem occured.....
while installing that rom.....
i followed the instruction given with the rom......
it said....that go to cwm recovery mod > advanced > wipe battery stats
m not sure but i think that step given me that problem...
plzz help me.. !!!!!

Thank you Very Much
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
Thank you very much

how to hard reset if canvas2 dead after jb update and battery drain

Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1

feel free to ask anything tht comes to ur mind
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
How is SUVI rom

Charging Issue
Jaymmx said:
How is SUVI rom
Click to expand...
Click to collapse
Hello Evveryone, Can someone tell me about the Charging issue.
My Mobile was recently Rooted & made some amny changes/ Added Apps Etc; Though.
After the Mobile is Completely Dead with Battery/If the Phone is Off It WONT CHARGE AT ALL.
Anything that can be advised, Will be Greatly appreciated.:fingers-crossed:

check my post above regarding charging issue..
hit thnxx if it helped..
Sent from my Micromax A110 using xda app-developers app

Sai_Goud said:
Hello Evveryone, Can someone tell me about the Charging issue.
My Mobile was recently Rooted & made some amny changes/ Added Apps Etc; Though.
After the Mobile is Completely Dead with Battery/If the Phone is Off It WONT CHARGE AT ALL.
Anything that can be advised, Will be Greatly appreciated.:fingers-crossed:
Click to expand...
Click to collapse
Connect charger to phone and hold the power button until it's switch on
Sent from My Rooted Canvas 2 Using JMP Rom
HIT THANKS IF I HELPED...

help
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
not work in my case battry icon shoows but its hang thr.. red led not glowin while i connect charger.. ny other suggtion ? bro

underground_jatt said:
not work in my case battry icon shoows but its hang thr.. red led not glowin while i connect charger.. ny other suggtion ? bro
Click to expand...
Click to collapse
Instead of 4-5 minutes...hold it continuously for 15 minutes....

ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
Thank you so much. Worked for me. I believe it's a problem with those custom boot logos and complete drain.
Does suvi rom have custom boot logos? Because I've stock rom (Mobistel T2 17.01) and just changed the boot logo. Never had this problem on a complete drain before.
I don't know if you need step 5. I did immediately leave the power button and it worked.
Did you mean "Leave the power button immediately and then hold it continously"?

underground_jatt said:
not work in my case battry icon shoows but its hang thr.. red led not glowin while i connect charger.. ny other suggtion ? bro
Click to expand...
Click to collapse
hey bro,
is phone start ?
how?
i have the same problem.......
plz help me bro............

Hello..I did the same what u told..my phone started charging..but it is only charging in switch off mode..the charging goes off when i switch on my mobile..does anyone have a solution for that..waiting for your reply..:good:
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse

@Rishiprl This happened to me also
So I charged my battery in other mmx canvas 2 And it worked so I try the same maybe it will work

Solution for Micromax A110 not charging or dead

Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After flashing a zip, my phone got drained in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys. :good:

solution for micromax a110 not booting or charging

Plug Solution for Micromax A110 not charging or dead
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After flashing a zip, my phone got drained in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
please hit thanks......if this helped you.

samsung galaxy note 2 multiwindow for micromax a110
Did anyone know that how to install multi window like samsung galaxy note 2 in micromax a110?

Don't you think that this is the wrong section to post this?
And moreover this has been discussed in a110 forum before Also.
Anyways thanks for sharing your experience at xda.

[Completed] micromax a111 not charging

I have a micromax a111 canvas having charging problem.
I have done already the following:
1. Did factory reset
2.Changed the battery (but found there is no problem with batteries)
3.The OS android 4.1.2 (original) copied again
4.The charger pin replaced
5.Tried with MMX charger and other chargers also
The phone sometimes charges well and most of the time shows charging, but never charges. The battery percentage suddenly drops hugely.
The problem still persists and dont know what to do with it.

XDA Visitor said:
I have a micromax a111 canvas having charging problem.
I have done already the following:
1. Did factory reset
2.Changed the battery (but found there is no problem with batteries)
3.The OS android 4.1.2 (original) copied again
4.The charger pin replaced
5.Tried with MMX charger and other chargers also
The phone sometimes charges well and most of the time shows charging, but never charges. The battery percentage suddenly drops hugely.
The problem still persists and dont know what to do with it.
Click to expand...
Click to collapse
Hmm ... it's not the battery?!
And you replaced the charger pin ... you mean the USB port of the device?!
I hope that you have not damaged something important.
You can register on xda and ask in the Canvas Doodle A111, Doodle 2 A240 Q&A, Help & Troubleshooting forum.
But maybe you need to give it to a service center for repair/replacement.

It_ler said:
Hmm ... it's not the battery?!
And you replaced the charger pin ... you mean the USB port of the device?!
I hope that you have not damaged something important.
You can register on xda and ask in the Canvas Doodle A111, Doodle 2 A240 Q&A, Help & Troubleshooting forum.
But maybe you need to give it to a service center for repair/replacement.
Click to expand...
Click to collapse
Yes, the usb port of the device was replaced by service centre. It has no issues. When Charger is attached, it works fine, it shows the power on led (red).
Except that the device is working fine. All apps work fine. Checked for virus,malaware using 360 app. It shows system is in a fine condition.
Only problem is battery is not charged properly. Sometime it charges and shows some percentage say 80% or so. But when the system switched off and switched on again, the battery % suddenly drops to very low % say 20 or 15%.
This is the problem I am facing and other than this there are no issues with the system.
Would like to know what will be root cause? In my perception it should be some hardware issues rather than software issue.
Pls advice

rajanjk said:
Yes, the usb port of the device was replaced by service centre. It has no issues. When Charger is attached, it works fine, it shows the power on led (red).
Except that the device is working fine. All apps work fine. Checked for virus,malaware using 360 app. It shows system is in a fine condition.
Only problem is battery is not charged properly. Sometime it charges and shows some percentage say 80% or so. But when the system switched off and switched on again, the battery % suddenly drops to very low % say 20 or 15%.
This is the problem I am facing and other than this there are no issues with the system.
Would like to know what will be root cause? In my perception it should be some hardware issues rather than software issue.
Pls advice
Click to expand...
Click to collapse
Hard to say ... best to ask in your device's Help thread that I linked in my previous post.
XDA Assist is not the right place to discuss this further.
Thanks for your understanding. Thread closed.