Related
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
thanks
thank you very much. you really saved me from a major major trouble.
regards..
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Good luck guys.
Click to expand...
Click to collapse
Dude... i was pulled out from my jeopardy big time.... cheers!
valentine86 said:
Dude... i was pulled out from my jeopardy big time.... cheers!
Click to expand...
Click to collapse
me too.. what i did was i pull out the batt. then push the power btn until you can see a fade charging icon. then I just leave the charger on the phone for like 3 hrs... fluke or not, the phone is ok again.. thank god..:victory:
Dead battery?
EDIT:
You are a lifesaver! I have a shattered camera glass and heavily modded phone, and dreaded visiting the service center. This fix worked perfectly!
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
This is the screen you're talking about, right?
I've kept the on button permanently pressed thru a knot and counting the minutes now. Perhaps I'll let it be through the night.
Hope this gets resolved.
I had the same problem.. What I did was that... I have connected the phone to pc via usb... After about 10mins the phone booted up... I'm using suvi rom
Sent from my Micromax A110 (Canvas 2) using xda premium
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
Thanks dude.. :thumbup:
But k have no issue after jb update
Sent from my Cynus T2 using xda premium
thank you
thanks a lot....it worked for me
thanks
happy....:laugh::laugh:
i have this problem from yesterday.
i flashed JMP V5 jelly bean rom. after this my phone stopped charging. whole night i kept it on charge but no use. my phone is totally dead.
when i connect charger with adopter, it shows blue battery sign that it's charging but it doesn't charge at all.
i tried your solution. there is green battery sign keeps on flickering till the time i keep holding power button. i kept holding power button for almost 6 minutes but no use. it doesn't boot.
i tried it already 3 times.
any other suggestions?
EDIT: i just been to Micromax service center. when they changed the battery my phone started working but when the service tried charging for 10 minutes, charge was not increasing at all.
he said there is problem called "dummy charging" with motherboard. they need to replace motherboard. it will take 10 days to get this part. let my phone there for repair.
It worked
It worked... thanks mate!
thanks
thanks.......
I too faced the same problem before. I charged my battery with an external charger and it worked just fine.
Thanks
Hi,
I registered on xdadevelopers just to thank you for this tip. It saved my phone.
Patch available for Battery issue
Dear All,
Mr. JigarPatthani has already released the patch for it. I normally use his ROMs for my MMX A110. So please use it.:good:
fix not working
i tried the above procedure.. my phone just reboots after the after i hold the power button for 5-10 seconds.. instead of of the battery flickering... help.. and i observed that the battery charge increases after reboot .
thanks in advance
Thanks !!!
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
Thanks so much!!! I was dreading to go to the service centre....
Is this problem still exists with the newer version of micromax JB ?
Micromax a110 NOT CHARGING...!!! :crying:
My MMX A110...is not charging...
i don't know.....which rom...
but i remember...that...i flashed a rom.....
and after flashing that rom...this problem occured.....
while installing that rom.....
i followed the instruction given with the rom......
it said....that go to cwm recovery mod > advanced > wipe battery stats
m not sure but i think that step given me that problem...
plzz help me.. !!!!!
Thank you Very Much
ursghouse said:
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After upgrading to JB, my phone got drained after 4 to 5 hours of music in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
Good luck guys.
Click to expand...
Click to collapse
Thank you very much
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
feel free to ask anything tht comes to ur mind
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
How is SUVI rom
Charging Issue
Jaymmx said:
How is SUVI rom
Click to expand...
Click to collapse
Hello Evveryone, Can someone tell me about the Charging issue.
My Mobile was recently Rooted & made some amny changes/ Added Apps Etc; Though.
After the Mobile is Completely Dead with Battery/If the Phone is Off It WONT CHARGE AT ALL.
Anything that can be advised, Will be Greatly appreciated.:fingers-crossed:
check my post above regarding charging issue..
hit thnxx if it helped..
Sent from my Micromax A110 using xda app-developers app
Sai_Goud said:
Hello Evveryone, Can someone tell me about the Charging issue.
My Mobile was recently Rooted & made some amny changes/ Added Apps Etc; Though.
After the Mobile is Completely Dead with Battery/If the Phone is Off It WONT CHARGE AT ALL.
Anything that can be advised, Will be Greatly appreciated.:fingers-crossed:
Click to expand...
Click to collapse
Connect charger to phone and hold the power button until it's switch on
Sent from My Rooted Canvas 2 Using JMP Rom
HIT THANKS IF I HELPED...
help
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
not work in my case battry icon shoows but its hang thr.. red led not glowin while i connect charger.. ny other suggtion ? bro
underground_jatt said:
not work in my case battry icon shoows but its hang thr.. red led not glowin while i connect charger.. ny other suggtion ? bro
Click to expand...
Click to collapse
Instead of 4-5 minutes...hold it continuously for 15 minutes....
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
Thank you so much. Worked for me. I believe it's a problem with those custom boot logos and complete drain.
Does suvi rom have custom boot logos? Because I've stock rom (Mobistel T2 17.01) and just changed the boot logo. Never had this problem on a complete drain before.
I don't know if you need step 5. I did immediately leave the power button and it worked.
Did you mean "Leave the power button immediately and then hold it continously"?
underground_jatt said:
not work in my case battry icon shoows but its hang thr.. red led not glowin while i connect charger.. ny other suggtion ? bro
Click to expand...
Click to collapse
hey bro,
is phone start ?
how?
i have the same problem.......
plz help me bro............
Hello..I did the same what u told..my phone started charging..but it is only charging in switch off mode..the charging goes off when i switch on my mobile..does anyone have a solution for that..waiting for your reply..:good:
ssmcrak said:
Once upon a time my battery was totally drained as i was busy solving a few sums, n when i looked at my phone it was not rebooting.. i connected to the charger for 4-5 hrs but no use,.. i was totally mad at my phone nd cursed this local brand.. but later on after a day i found a solution.. Try this, it works...
1. Remove your battery once and fit it back.
2. Plug you charger cable from adapter to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
feel free to ask anything tht comes to ur mind..
Devices: MMX canvas 2, suvi rom JB 4.1.1
Click to expand...
Click to collapse
@Rishiprl This happened to me also
So I charged my battery in other mmx canvas 2 And it worked so I try the same maybe it will work
Plug Solution for Micromax A110 not charging or dead
Solution for Micromax A110 not charging or dead after Jelly bean update
Hi Guys,
After flashing a zip, my phone got drained in night. But I went to sleep before it went dead or 100% drained.
Morning was the issue it was not charging out. I know this was the known issue reported in xda-developers website but no solution for a guy who was repeatedly asking solution for it.
So here comes the solution.
1. Remove your battery once and fit it back.
2. Plug you charger cable from adaptor to phone. Guys Ian not sure about usb cable users.
3. Press the power button for more than 5 to 10 seconds. You will get a battery icon but the charge will not show as it charging.
5. Don't leave the power button immediately.
6. Hold it continuously for 3 to 4 mins. The battery icon will flicker till that point.
7. After this the boot logo will come. Once it comes, your mobile will start charging.
please hit thanks......if this helped you.
samsung galaxy note 2 multiwindow for micromax a110
Did anyone know that how to install multi window like samsung galaxy note 2 in micromax a110?
Don't you think that this is the wrong section to post this?
And moreover this has been discussed in a110 forum before Also.
Anyways thanks for sharing your experience at xda.
Hi There,
Yesterday morning I went to work with a completely charged Moto G. When I arrived at work my screen was black and had become unresponsive.
The powerbutton doesn't wake up the phone, tried several times, holding it for more than 150sec. When connected to a charger (tried multipe) the charging led lights up, not blinking.
I have read on a motorola forum that this could indicate that there's insufficient power in the battery to activate the display.
However it was completely charged.
My Moto G has an unlocked bootloader, is rooted and has a custom rom (C-Rom, [ROM][AOSP][KK][12/05] **C-RoM** -4.4.2- -v6.5)
Is there anything I can try or is my phone a brick now?
Thanx in advance
The same problem
I am having the same problem too.
My moto G drained its battery until it shut down. Then i promptly went to charge it. The screen is blank and and notification light is on.
snooze1973 did u find a solution or is it now working?
PS My Moto g bootloader unlocked, stock rom,rooted and it is on the Faux123kernel
Thanks in advance
No luck Yet
No luck yet, left it on the charger for a whole night, still just the white charging led. No response to the power button.
But I refuse to believe it is completely dead. Before I had a HTC Desire S, tried many custom roms, never bricked it.
I just can't imagine what happend the day before yesterday.
Perhaps I'll try and find a more powerfull charger.
snooze1973 said:
No luck yet, left it on the charger for a whole night, still just the white charging led. No response to the power button.
But I refuse to believe it is completely dead. Before I had a HTC Desire S, tried many custom roms, never bricked it.
I just can't imagine what happend the day before yesterday.
Perhaps I'll try and find a more powerfull charger.
Click to expand...
Click to collapse
I think I found a solution. I followed these steps
1. Charge your phone via USB cable on your computer.
2. The white notification light should come on.
3. Then, do not touch any buttons on your phone.
4 The iconic Battery Logo(white background) should appear after several minutes.
Followed these steps and my phone eventually turned on
Good luck!!
Still no luck, trying a different cable (blackberry) now.
Not working for me, still just a beautiful white led indicator.
Start to think it's probably dead. Or battery thinks it's drained somehow.
Maybe anyone else has an idea?
Ok, I opened the Moto G and disconnected the battery, reconnected it after 10 sec. still no luck
Odd thing though and not very promising is that when the battery is disconnected the charging led still lights up when charger is connected.
Could this just mean that only the battery is fully drained or that the device is messed up?
Guess I going for a new one.
See if a new battery helps
Bought a new one today, so I can try and fix the other. First I will leave it for at least 24 hours.
Perhaps I will exchange the batteries at one time to see if that helps.
the same problem
shahtheass said:
I am having the same problem too.
My moto G drained its battery until it shut down. Then i promptly went to charge it. The screen is blank and and notification light is on.
snooze1973 did u find a solution or is it now working?
PS My Moto g bootloader unlocked, stock rom,rooted and it is on the Faux123kernel
Thanks in advance
Click to expand...
Click to collapse
i had the same problem, i had no idea how to turn on my moto g.
anyone could help please
Black screen but charging led lights up
I am experiencing the same issue.
I bought a dead moto g for part replacement with my current moto g. Just out of curiosity, I plugged in the charger to the newly arrived moto g and observed the similar behavior.
To go further, I swapped the battery and tried to turn it on, and voila, it boots!! It has C-ROM. But it won't charge the battery any how. Its again back to
original behavior : No Screen, No Battery Charging, Only notification LED glows. I kept it on charger for whole night, but no luck.
The notification LED turns on even if I the battery is removed and charger is plugged in. What does that really mean?
Is there a probability that the charging circuit is broken? or it has something to do with bootloader, C-ROM and custom kernel? Does any one thinks reverting back to Stock ROM will help out in any way?
Same here...
Exactly the same with my little brother his Moto G 4G (1st gen) (stock rom, BL unlocked & rooted).
Solid white LED when plugged in, no other response.
The most advertised trick does not work (step 6: flashboot screen doesn't show up)
[SIZE=+1]Q28: Moto G will not power up (addition to Q16 and Q25)[/SIZE]
Plug it into the charger
Hold the VOL DOWN key
While still holding the VOL DOWN key, press and hold the POWER key
Hold both keys down for over 120 seconds. This is more than two minutes and will seem like a long time. You might want to time yourself to make sure you hold it longer than two minutes.
After holding the keys down for more than two minutes, release them.
The Flash Boot screen will display, and the Normal Reboot option will be highlighted
Press the VOL UP key and the device will start a normal reboot.
If you have tried the above and it didn't work, try this:
Plug in the phone for 15 minutes.
Proceed to Step 2 above.
Click to expand...
Click to collapse
(source: http://forum.xda-developers.com/showthread.php?t=2537119)
It has been an hour on the charger of my Asus T100 Tablet (5V, 2A). Still no luck...
Due to the lack of other solutions, I guess all our phones are ready for RMA...
Update: an overnight charge on a 5V 1A charger did the trick. White led was gone this morning, booted normally.
JoWannes said:
Exactly the same with my little brother his Moto G 4G (1st gen) (stock rom, BL unlocked & rooted).
Solid white LED when plugged in, no other response.
The most advertised trick does not work (step 6: flashboot screen doesn't show up)
(source: http://forum.xda-developers.com/showthread.php?t=2537119)
It has been an hour on the charger of my Asus T100 Tablet (5V, 2A). Still no luck...
Due to the lack of other solutions, I guess all our phones are ready for RMA...
Update: an overnight charge on a 5V 1A charger did the trick. White led was gone this morning, booted normally.
Click to expand...
Click to collapse
i hv been facing the same problem since past 2 days, it was working gud wen suddenly it went bad. i remember using it and putting it back into my pocket & after like 10 mins wen i tried to open it, it didn't respond. i tried to hard reset it (by pressing vol down n power button) & by forced reset but it didnt work. now, i have put it on charge on a source of 5v 1A charger. i hope it works and works well. now my question is that i remember my cell was nearly 50% charged wen all of ds happened, so i wish to know that is dre some hardware problem or dead battery problem?? thnx in advance
shahtheass said:
I think I found a solution. I followed these steps
1. Charge your phone via USB cable on your computer.
2. The white notification light should come on.
3. Then, do not touch any buttons on your phone.
4 The iconic Battery Logo(white background) should appear after several minutes.
Followed these steps and my phone eventually turned on
Good luck!!
Click to expand...
Click to collapse
I don't know why a USB charger and a PC connection should make any difference when the phone is not booted up.
I had the same problem. I solved it by removing the battery by opening the phone (mine was out of warranty) and taking it to repair shop where they charged the battery for an hour. Then when I put it back in, the phone rebooted normally with 10% charge.
But ever since, my battery life has deteriorated. Doesn't even last one full day. And I have had the same issue twice. I think I need a new battery.
snooze1973 said:
Bought a new one today, so I can try and fix the other. First I will leave it for at least 24 hours.
Perhaps I will exchange the batteries at one time to see if that helps.
Click to expand...
Click to collapse
Did New battery helped u in booting device?? because i am having the same problem.
same problem here.just call from Moto Care they told to charge bettery for 7 hours min.then on the phone.let see if it works i will update..
Same Problem to me not for me this problem is faced by several moto g users
snooze1973 said:
Hi There,
Yesterday morning I went to work with a completely charged Moto G. When I arrived at work my screen was black and had become unresponsive.
The powerbutton doesn't wake up the phone, tried several times, holding it for more than 150sec. When connected to a charger (tried multipe) the charging led lights up, not blinking.
I have read on a motorola forum that this could indicate that there's insufficient power in the battery to activate the display.
However it was completely charged.
My Moto G has an unlocked bootloader, is rooted and has a custom rom (C-Rom, [ROM][AOSP][KK][12/05] **C-RoM** -4.4.2- -v6.5)
Is there anything I can try or is my phone a brick now?
Thanx in advance
Click to expand...
Click to collapse
Same Problem to me not for me this problem is faced by several moto g users are facing this if they unlocked their device bootloader.
I have a simple solution for that I have faced this issue long time ago and now I know a permanent solution. You all have usb cables in your house...just took a old one and cut it from the mini usb side..there are 4 wires...you have to care about red and black..open your moto g battery and took it off from the phone now connect the usb cable to your pc and touch the red wire to the positive and black to the negative ...just do this for 45 seconds and immediately connect the battery to the phone and connect the charger...phone will starts charging from 0 % pls do not wait to connect the switch and back cover just charge it upto 20 % the cover it up.....DO NOT LET YOUR BATTERY DRAIN MORE THAN 30% AS THIS IS COMMON PROBLEM IN LI ION BATTERIES...
sayonsamui said:
I have a simple solution for that I have faced this issue long time ago and now I know a permanent solution. You all have usb cables in your house...just took a old one and cut it from the mini usb side..there are 4 wires...you have to care about red and black..open your moto g battery and took it off from the phone now connect the usb cable to your pc and touch the red wire to the positive and black to the negative ...just do this for 45 seconds and immediately connect the battery to the phone and connect the charger...phone will starts charging from 0 % pls do not wait to connect the switch and back cover just charge it upto 20 % the cover it up.....DO NOT LET YOUR BATTERY DRAIN MORE THAN 30% AS THIS IS COMMON PROBLEM IN LI ION BATTERIES...
Click to expand...
Click to collapse
Interesting, but how did you determine the negative and positive terminals on the battery flex? Can you, please, mark the attached photo of the battery of moto g to help the community?
Also, as a side note I think I discovered a solution - I connected the phone to my PC's usb 2.0 port and held the power button for 2 minutes - at which the LED blinked momentarily and then continues to shine. I left the phone connected and continued to browse for solutions to this battery charging dilemma - then about 5 minutes the LED stopped shining (and I breathed a sigh :silly: !!! becaue this is the sign of battery being charged!) and after about 30 minutes of charging I turned the phone on and it was 16% charged. Well I haven't been able to reproduce this solution (since, I have been extra cautious with the battery now!) but I would surely like to know if anyone can reproduce this solution:
1. Plug in your phone to USB 2.0 or 3.0 port with original moto g cable and confirm that the LED shines continuously.
2. Hold the power button for 2 minutes (which I discovered to be a long time if you just continuously stare at the phone!) after which you will notice that the led with blink momentarily before continuing to shine continuously. (I suggest you continue holding it for another 2 minutes after which the led will blink again momentarily)
3. Leave the power button and leave the phone attached to the port for at least 30 mins before attempting to power on.
So I had a extreme low battery alert, where it said cannot boot until more charge.
Stuck the charger in.
Battery wasnt going up.
Now it wont turn on at all with charger in or out.
So looks like either the battery is dead (non swappable) or the usb port is broke so isnt accepting charge.
Wow the phone is only 2 months old.
any ideas? or has to be returned for repair/exchange?
luckily was only using this phone for testing roms and stuff, not daily driver.
chrcol said:
So I had a extreme low battery alert, where it said cannot boot until more charge.
Stuck the charger in.
Battery wasnt going up.
Now it wont turn on at all with charger in or out.
So looks like either the battery is dead (non swappable) or the usb port is broke so isnt accepting charge.
Wow the phone is only 2 months old.
any ideas? or has to be returned for repair/exchange?
luckily was only using this phone for testing roms and stuff, not daily driver.
Click to expand...
Click to collapse
Try plugging into charge on a low power source via USB like a PC or laptop. Anything that isn't direct to a mains socket. It can help slowly replenish the battery, just leave it be for a while.
I just had a similar experience where my phone died overnight. Plugged it into my non OPO charger that I used with my older blackberries.
It wouldn't even turn on after 20 minutes of being plugged in. I decided to use a charger that outputted more energy and it immediately turned the phone on.
My advice, try using different charging sources.
Sent from my A0001 using XDA Free mobile app
I recently had this problem. Solved it with a simple google search which brought up O+'s own help page. Press the power button for 20 seconds 5 times in succession. This simulates a battery pull (there will be a vibration) . Now plug the phone into the original charger and leave it for a couple hours at the least.
You could also try to disconnect and connect the battery. For this you have to open the phone. Here is a little tutorial https://youtu.be/xLB4fhOyvuA
Hope this will fix the problem.
Same thing happened to my sons 1+, This is the reply form CS
Regarding your issue, please try with below steps:
1) Keep the phone for 12 hours without touching and charging...
2) Charge with official charger and usb for 6 hours(after the above mentioned steps) and then
3) Pull off the usb and put back again ... and you may get a LOW battery screen again staying for 4 / 5 mins...
4) Now don't try to boot or anything.. let it charge for 1 hour or more.
5) Now finally boot your device by pressing power button for few seconds
6) Phone should boot normally...
Trying it now