http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
problem loading
i downloaded the version micro_sim_s3_quadcore_dualcore_firmware_20130107 and when i try to flash it with sp flash tool i get the error that the phone is mtk6577 and the file is for 6575.Look the photo i have attached and let me know.
Do i do something wrong?
Beer Brand said:
http://www.youtube.com/watch?v=CZ35mOvRpm4 Procedure on how to get the firmware use version 3 universal firmware across all MT657X chipsets. (January 2013)
http://forum.xda-developers.com/showthread.php?t=1982587 use this SP flash tool!.
http://www.chinaecarts.com/samsung-...nch-mtk6577-android-41-16gb-phone-p-3095.html firmwares are on this page. check what type of S3 clone you have... (I have a 99 percent replica)
I have reflashed a S3 clone using this method. I'll create a comprehensive guide if I have the time.
All i'm asking is hit the Thanks button if this helped you
Click to expand...
Click to collapse
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Beer Brand said:
try version 3 first the universal one. then you can play with the others by updating through stock recovery. i bet you have a dual core one. press vol down , ok and power button at the same time on boot and go to version. if it says MAUI on the list then we have the same clone
Sent from my Nokia 5110 using Tapsilog and Kape
Click to expand...
Click to collapse
Do you mean the one called ''micro_sim_s3_quadcore_dualcore_firmware_20130107'' ?
I tried to flash with sp flash tool but i get error!Not compatible!When it flashes i get error ''the target platform is 6577s00''
I cant load it!
Why do you mean by saying universal?
https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
try this link this goes to all mtk657x chipsets.
Sent from my Nokia 5110 using Tapsilog and Kape
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
soulfreem said:
i already said!i have downloaded but i cant load it on phone i get error see my previous post!\Look post 3 of this thread please LOOK the photo and let me know what wrong!?
Click to expand...
Click to collapse
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
s3 clone
can this fix my s3 clone mtk6577?
Beer Brand said:
Try to read the chinacarts website because you download the one for quadcore micro_sim_s3_quadcore_dualcore_firmware_20130107 the link i provided you is the the one that worked for me.
Version 3:
For micro sim version
(When you make upgrade the phone success,the boot screen will start on"welcome"logo,dial"*#2013#"or"*#0825#" then press"OK" reboot the phone,the boot logo will changed to Samsung Logo)
Firmware( Released on 07,Jan,2013) this firmware universal for MT6575,MT6577,MT6589 CPU:https://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
Now mind your manners and be thankful and READ! we are not obliged to help out. Did you tried out this UNIVERSAL FIRMWARE! if you do then it never worked then there is nothing we can do to your expensive paperweight.
Click to expand...
Click to collapse
Is the link the same for the quadcore and dualcore?
Thank you for your help
zeldaaxe1 said:
can this fix my s3 clone mtk6577?
Click to expand...
Click to collapse
i also have issue with my s3 clone mtk6577... its no longer turning on after trying to odex it.. tried to flash the firmware and thats when the phone no longer turning on.. please help me.. im trying to flash it again using the flash tool but stuck in 0% what do i need to do?
I have the same problem. S3 micro sim clone MTK6589, new firmware tried (chinaecarts.com/s3firmware20130320.rar ), then the phone not booting.
I just contacted with Chinaecarts.com, they tried to solve the problem but not working.
Also tried with the universal firmware, but it sad I've MTK6577 phone, not MTK6575.
If I will have fresh news, will post it.
(seller said, I should send the phone back, and they will fix it.)
I tried with this:
H.tps://docs.google.com/open?id=0B4AdByfaH4T0TjVjc2w0OXVqQUE
It is theoretically for the MTK6577 and MTK6589 as well. Got the previous result: "Platform error. The target platform is MT6577_S00."
I think there is a solution for the blank screen problem:
- need a Flash Tool. (on the link above you can find it, or on the link in my previous post)
- need a firmware for MTK6577 micro sim card.
I tried with many sdcard firmware versions, but no effective result.
Hi,
1, You need to know what is exact model of your s3 mtk6577. There are many s3 mtk6577 models in the market. Different s3 mtk6577 is made by different manufacturer, so the ROM is definitely different.
2. After you get the right ROM, then flash your phone by using flash tool SPMultiPortFlashDownloadProject
Bricked MTK6577
The image of the S3-micro-sim-version-20121210 this with corronpidos files, and the method that you should have done to retrieve your appliance was using the recover instead of SP tools because the files are not in rar. SP standard my phone so can enter META mode and nothing more.
soulfreem said:
http://product.madeinchina.com/wholesale-product-image/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-FWVGA_14003970.shtml
i have the phone of the above link. i bought this phone I9300 (S3) MTK6577 Android 4.0 OS 3G 4.6 'FWVGA Screen GPS with microsim slot and after i restore to factory defaults i lost imei.I couldnt recover imei and then i tried to flash a new rom with flashtool.Now phone dosn't boot and screen is dead ,only red led is on and the led of buttons.
Maybe something wrong with the preloader and the rom i flashed.What can i do? do you have a new rom to flash with flashtool?Can you send me instructions how to unbrick this phone?Can you send a link of rom to flash and also a flashtool for it?Does anybody have the same phone that can upload the back up of his rom?
i have attached also a photo so you recognise the model of the phone which takes microsim
You can find this phone also here..
http://product.madeinchina.com/I9300-S3-MTK6577-Android-4-0-OS-3G-4-6-39-FWVGA-Screen-GPS-Wifi-Smart-cell-phone-FREE-SHIPPING-_14003970.shtml#ask
and here
http://forum.china-iphone.ru/viewtopic.php?f=70&t=24648&p=905244#p905244
Hope somebody have the same phone to help because now its bricked!
Click to expand...
Click to collapse
It looks I have the exact model of yours. I am trying to update the firmware by entering the recovery (I suppose it is {vol up + power}). But my external sdcard is not mounted to pick the rom from.
I hope this may help you? I had the same problems as you with the same phone after rooting it I deleted the original rom as it went into a loop and would not start so I started installing every firmware I can find and install, I got one which works BUT! no English , it boots English then goes into several languages but not English it is HDCI9300 rom. I googled it as no one seems able or do not want to help although I have asked several times in many different ways. I hope this will get your phone at least to boot up, I used sp flash as this rom will not let you do anything with the sd card (if it does you need to translate one of the languages)? I hope this helps, if not you have lost nothing:fingers-crossed:
Hello. I have a similar problem with yours. A friend of mine has a 100% visual clone (MTK6577) with the same sticker under the battery like in the first post, he tried to flash it, but he messed up something, and then he brought it to me completely DEAD . No charging, no PC connection - nothing... I tried many button combos, and accidentally i found out that if i connect the phone without battery, press and hold VOL+, VOL- & POWER for a few seconds, the PC detected the mediatek com port , installed the drivers without problem, and now the real problems begins - the ROM. I tried all of the roms from chinaecarts but without success, first i couldn't flash the thing, and after downloading several roms from chinaecarts, and finally flashed it and guess what - no LCD :silly: . So i tried combining different files from different roms, and now i'm at a point where i can turn on the phone, screen goes white, but the phone boots, it makes the vibration after the boot process completes, and after that the phone is responding to touches (it vibrates), lock/unlock works, PC detects USB Mass Storage Device, USB Composite Device and MTK65xx Android Phone. I also noticed that in the FW packages i downloaded there are some files that aren't flashed (i think) like for example the kernel.img so i was wondering if i can flash it manually? Please someone help, share some FW links, i can't find anymore...
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
help please!
brad_maliik said:
can anyone help with this?? or even identify which s3 clone the phone is from the first post... i have tried many "solutions" for clone 6577 and NONE works.. I have scoured the internet for possible solutions and nothing..
Click to expand...
Click to collapse
Try this (remove spaces): https:// hotfile.com/dl/207667730 /e94a926/6577_9300_650.zip. html
Hello. I have an foreign phone (chinesse i think) it's called Colorovo CityTone Vision.
There are the tehnical specifications: http://www.colorovo.eu/products-en/smartphones-en/colorovo-citytone-vision.html?product_id=3263
I instaled Chainfire 3D and the i activated ESP (i think) driver. Then the phone powered off and it didn't booted since then. The screen is totaly black. It is a bit lighted. Firstly I enetered in the stock recovery mode to wipe all data. I tought that this will work but didn't. I searched foar an better recovery mode and i found this topic http://forum.xda-developers.com/showthread.php?t=2788632. I followed the instructions to install TWRP but after I finished (I metion tha i couldn't unlock the bootloader because i goat an error tha says "oem command not found" or something like this) I couldn't acces the recovery mode neither. All i cand do now is to enter in fastboot mode. I cand only use these commands: fastboot devices, fastboot reboot, fastboot flash recovery recovery.img . The adb is not detecting my phone ( i have all the drivers installed corectly). I'm despered. I can't find any file for my phone (stock recovery or stock files). I'm very sad. I tryed to fix my phone all the day ( almost 8 hours). PLEASE HELP ME!
What can i do to repair my phone. It is there any universal stock files or stock recovery?
Excuse my english. I hope you understand me.
ps: i don't know where shoud i write this topic
Unfortunately your device is not a confirmed device for chainfire 3d. Please review this thread (mainly the first post) here: http://forum.xda-developers.com/showthread.php?t=1087427
If you wish you can ask your question in this thread http://forum.xda-developers.com/showthread.php?t=2259645
In the mean time you should look everywhere for the stock firmware.
I'd also like to mention that the method you tried to do to install twrp was for the oneplus one. You're playing with fire here.
I wish you the best out here in recovering your device
Thread closed
Hi peeps...
I got a situation here with my a850. Before, I'd just bricked my phone after done flashing some roms from needrom.com. then my phone just dead & cant even to switch it on. Later I managed to get it fix by flashing this rom A850_S203_140208 and turn out to be ok. Get it rooted with Framaroot & get back my imei with Mtk Droid Tools also get rid out of Chinese bloatwares & apps with that software.
Now when I try to flash another rom, it get stuck with A850_S203_140208 Chinese logo. Then I had to restore it back to where it was.
Is there someone willing to help me out?
I guess you have to flash to s121 as most ROMs are based on it
a850 rom are not suitable for a850i . thats why. find the one for a850i .
What do you mean? Is S121 ROW is compatible with this S203 CN? I wanna try it if yes...
Who come here because want to fix phone won't turn on and pc won't detect is easy..
First, remove battery and connect your phone then press Power + Volume Up + Volume Down.
Then, your PC should detect your phone but wait.. you can't install them yet..
After that, find your stock firmware compatible with your phone (if you don't know, you should find it, or you can download all files about Lenovo A850 then test one by one)
Crap, disconnect your phone from. Then, load scatter file then untick all except PRELOADER, choose Download Only then it will flash. Connect your phone then press as it mentioned..
After that, you are done at fix PC not recognize the phone... after this settled.. flash the rom as well.. use the compatible only!! if you use the same.. the same things will happens..GOOD LUCK
Hi. The last days I`ve had flashed the Allview A5 Smiley because I`d forgotten the security code and I couldn`t get in it. I couldn`t found an original ROM for this kind of device but I`ve tried to install a ROM from Wiko Iggy because it seemed for me that they`re pretty the same. The flashing went well but after that the Allview didn`t want to turn back on anymore and my windows does not recognize it at all. So the device is completely dead. I don`t know what to do. I`ve tried to flash another ROM MT6582 for Allview A5 Duo but I couldn`t because the computer don`t see the phone connected. With battery or without it`s the same thing. Sometimes it tries to connect but I receive an error that says: DRAM failed and The device powered to fast (something like that). Please help me because I don`t know what to do anymore.
P.S.: The flashing was done with the latest SP Flash Tool. Thank you!
Another thing
doctorgadget said:
Hi. The last days I`ve had flashed the Allview A5 Smiley because I`d forgotten the security code and I couldn`t get in it. I couldn`t found an original ROM for this kind of device but I`ve tried to install a ROM from Wiko Iggy because it seemed for me that they`re pretty the same. The flashing went well but after that the Allview didn`t want to turn back on anymore and my windows does not recognize it at all. So the device is completely dead. I don`t know what to do. I`ve tried to flash another ROM MT6582 for Allview A5 Duo but I couldn`t because the computer don`t see the phone connected. With battery or without it`s the same thing. Sometimes it tries to connect but I receive an error that says: DRAM failed and The device powered to fast (something like that). Please help me because I don`t know what to do anymore.
P.S.: The flashing was done with the latest SP Flash Tool. Thank you!
Click to expand...
Click to collapse
I`ve forgotten to say that first flashing was done with MT6572 and in sp flash tool I`ve checked Format & download all.
Hi there,
I'm sorry but I can't find anything related to your question/device.
You must start asking that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
tried to flash the custom rom of note 3 to my alcatel onetouch mpop c9.since it was my first time I didnt backuped my stock rom, so now after flashing the note3 rom by using CTR recovery mod just a few changes like widgets and wallpapers of note3 came and also some icons.. but the side effects wighs more, i lost my settings screen, thers no setting shortcut in the app drawer and if i try to get it from the notification bar it wont open.. also the gallery is not showing anything which my sd card contains.. top of all it shows no network for the sim.
NB:must understand that i cannot connect to wifi or share necessary apps by Bluetooth because my settings screen is not there. if anyone like to help me please be in a way that a beginner can understand because this is ma first time. thank you all.
Head to http://support1.alcatelonetouch.com/global-en/upgradeSoftware find your phone stock rom or update file and google how to flash rom on alcatel mpop
i tried my best brother.. downloaded the stock rom(from different site that you mentioned because i cant understand that site) installed flash tool kit on the pc. and when connected my alcatel c9 the system cant recognise the device and the flash didnt worked.
then i tried installing driver software.. but still its not recognised. now what to do.??