Database Info

Bricked P350

Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP350/ASEABK/V10c_00/V10C_00.kdz from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP

think the adminz need to bring a new forum for LG Optimus P350 in here !!

I've bricked my LG P350 too. After i use Call+Vol Up+End, I see this on my screen:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
STALL GET_DESCRIPTION 128 6 1006 0 18
fastboot: processing commands
What shall I do? Can anyone help me? What programs can I use to restore it?

I recieved today the same error-message:
I thought my p350 is bricked, but I tried with the following progs/images about 5 or 6 hours and my phone runs now with the custom rom.
-recovery-RA-pecan-2.2.1-GNM-drap.img.zip
-fastbootflasherV2.zip
-Pecamod_v0.5.zip
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
Good Luck

p350 bricked
I got similar error when I plugged my phone to my pc. It says:
Fastboot mode started:
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange -
When not plugged in:
Fastboot mode started:
udc-start()
This is the only forum that tackles this subject/ and was trying to do these steps:
-install usb-driver for lg first. Don't run LG-Software
-open fastbootflasher
-connect phone via usb (several tries)
-flash recovery (recovery-RA-pecan-2.2.1-GNM-drap.img)
-reboot phone while holding volume down ,send + end buttons, than it will start in recovery mode.
-Install Pecamod_v0.5.zip from phone sd-card.
downloaded all of the files from net but unfortunately my pc doesnt detect my p350. I think I have downloaded all of the usb drivers available for my lg phone still no go/
Hey schweitzi67, can you give me a step by step instructions on how you did your recovery? I'd really appreciate it if you will. Thanks in advance.

first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more

Hi. I tried doing all instructions from the first thread you posted. When everything is ready, plugged my p350, went to command prompt and typed "fastboot erase recovery" but it said "<waiting for device>" I have downloaded lgunited mobile driver from lgsetup (B2CappSetup). What do you think the problem is? Thanks!

joolsthebear said:
Hello ,
Ive bricked a LG P350me and need a german stock rom (kzl) endig to flash this with the LG flash tool . Any Idea where i can get one ? I´ve found nothing at the whole internet ...
got one from LG server , has anyone the shortcut (ASEABK) for a German Rom ? ... got it ... ADEUAP
Click to expand...
Click to collapse
Hey have you found a german rom? I am still searching, but i can´t find any Firmware with ADEUAP regioncode.
Maybe someone know where to get the firmware.
Nice Day

Be careful... I installed kdz wrong and now my phone, it does not work
I heard that can be easily solved if you start downloadmod but I do not know how to do it .... help

sweetnsour said:
first of all, since you all can boot into fastboot, NONE of you guys are bricked
and second, heres how to fix your fastboot (now before you continue, remember that you need to replace the lg optimus one files in this link with the files that suit your phone, which is to say that you need to find the kdz file for your phone before you begin this):
http://forum.xda-developers.com/showthread.php?t=1088046
http://forum.xda-developers.com/showthread.php?t=1015332
read through those two links carefully and make sure you know what you are doing because your phone can get bricked if you do something wrong. if you have the slightest doubt go research more
Click to expand...
Click to collapse
Thank you!! Your first link whas the solution for my problem, it wasn't easy for a noob like me, but it's doable if you follow those instructions very carefully
I'm so happy! thanks again.

my P350 is just dead
Hi Guys,
Have the very same problem here. Tried to flash new ROM, phone entered in yellow emergency screen, got an failed error from KDZ and now the phone is dead.
I can not seem to start it, tried any keys combinations but the phone seems to not respond at all.
If i at least could get into an emergency screen or something but...nothing...black screen and no hearth beat
Is this really the end of it?
Much appreciated for a solution here.

[Q] Help, with boot loop

Hi everyone!
I need, please help with a Chinese phone I just bought.
Some information about the phone:
MC603CH, board cellonsz73_gb, MT6573 ARMv6 797.90mhz, MC7305.zheng.V1.en display, brand Yusu, total 214 Mb RAM, 130 Mb internal space, external 3.7 Gb, Imagination Technologies GPU, OpenGL ES 2.0, currently running Android 2.3. 5 Kernel 2.6.35.7.
In Windows 8 on Mac and was recognized as HTC (Windows as My HTC). Turns out I can not stand just looking for that kind of device without having the urge to start moving in everything and in every way (especially since it's my first Android). I did root, installed a bunch of app to change the system and found a script that makes the Apps recognize a partition EXT4 like to have more internal space to install applications. The last two things I did while he was connected were able to install BusyBox to make the system recognize the init.de folder so I can run scripts in the beginning of the section and, silly me, make a run in the script.
He was pretty one, running everything is fast with the ROM that was running, which it came (modified to look like iOS), but after running the script, it restarted and went into boot loop. Then I try to recover the poor, and went hunting for information ... flash rom did (I was afraid to try installing and kill him at once), then I found a video that said I could try clearing the cache, I tried, I removed the USB cable from the computer to wait for the battery dies (it does not restart the button is in loop) and nothing.
I found another video that told me to go back to factory settings purchases that could go right.
The problem is I can not get into recovery mode by buttons (already tried all possible combinations and does not enter the recovery). I managed, after Google searches, and find the adb installed, managed to make it into the recovery by adb! Then I thought I could do everything that was needed to revive the pet. I fell to the tale of the factory settings, and I gave myself badly. Now the adb condegue not recognize the phone, I believe it is because he is no longer on usb debuging (factory settings), so now I'm here at all in the stirring cell, trying to find a way to disconnect the battery and do not think (believe only a technician can or someone with technical knowledge) so I can try some procedures using software I found (SP flash tools, tools mtkdroid, Android AIO flasher, etc.). To get drivers that worked in Portcom has been very difficult, I tried several until you find what the Windows install left. Well, it's more or less what is happening to me. I hope you can find someone to help me on this, because, as I said, it's my first android and I can not buy another one for a long time (I have a wife and four children, i can not spend too much ) and it cost me R$ 590.00 (Brazil) and not just pay. If anyone can help me, I am very grateful.
God bless you. Sorry for english from Google Translator.

Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.

dR.BaNaNe said:
Hej,
If you just can get into the recovery you could flash any rom made for your phone, just get the zip on your SD card and install through recovery.
Try to get into recovery through fastboot if your phone is supported and next time you root your android just do a nandroid backup.
Click to expand...
Click to collapse
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.

learned alot from your question

Wppley said:
Hi Dr.Banane! Thanks for responding!
The point is that I can not go into recovery mode at all the buttons on this phone.
The only ways in which I saw the screen of recovery mode this cell were: 1 by 2 by adb root manager when
I was with usb debugging enabled. I need to figure out exactly how to enter the recovery mode, because I think it
I will be able to access adb again and be able to delete the folder init.d script or do some flash ROM.
By the way, does the ROM Sophone MT6575 will work on it or kill it once?
Thank you. God bless you.
Click to expand...
Click to collapse
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.

dR.BaNaNe said:
Look at this and maybe it will help you:
http://forum.xda-developers.com/showthread.php?t=1929957
You have to flash a recovery.img and boot.img with computer but i don´t know if it´s possible without USB-debugging OFF, but atleast you can try.
Click to expand...
Click to collapse
Ok, thanks Dr. I will try this.
Please tell me someone knows a way to get into recovery mode?
Edit: I think i found the model of my phone: Sophone 4s v5 or Gooapple v5, I'm not sure.
Thanks.
God bless you.

Sorry for flood, but anybody can help me please? Think i loose my recovery. What can i do? Please!
Thanks,
Edit 16 02 13: I have in my hands another one cell ecxately same of mine, but im not able to get a backup of their rom, please help me, im almost in the goal!
Thanks. God bless you.
Edit 17 02 13: I would like to thank Dr. Banane and all the help that friends here from XDA have done to help me.
Thank God I managed to grab the rom from a device identical to mine and restore my Android. I learned a lot in those days I tried and tried and could help in forums with this topic: http://forum.xda-developers.com/showthread.php?t=1683883.

[Completed] Lenovo A536 Problem

Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.

AndroidNoobUser said:
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
There is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.

[Completed] Huawei Y6 SCL_L01 Softbricked?

Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.

Asdforcer said:
Hi guys, i got the Huawei Y6 SCL-L01 phone and i wanted to install a custom rom, so i tried to install TWRP first, but since there wasn't a Y6 version (there isn't a Y6 version for anything pf ) i used the P8 version and it installed but when it rebooted the phone was stuck at a screen that say FASTBOOT & RESCUE MODE. The phone seems to be unlocked according to that screen but the FRP is loocked.
Things i've tried so far
Installed ADB latest version, extracted Recovery Cust System and Boot images from an official stock ROM.
Tried all available drivers from Google TP_Link and Intel for my phone.
The screen i am stuck does not work with ADB commands, the device is not recognized.
Fastboot commands work and it sees the device correctly, the problem is every time i try to flash the images from the stock rom i get FAILED message due to FRP Lock.
Format userdata and cache doesn't work either.
Vol + / - and Power button combinations also have no effect, it only shows that screen regardless of what i press.
I've searched the web and the XDA forums extensively since this happened and tried every possible solution i could find even if it was meant for another device.. no luck.
And here's my question, how can i possibly remove the FRP lock by only using fastboot?
Please somebody help, i am like half a day away from decorating the wall with this piece of ****
PS: I am not able to upload screenshots, sorry about that.
Click to expand...
Click to collapse
Hi, Thanks for using XDA assist.
It looks like there is no dedicated forum for your device, however
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck

Please help:bootloop Iget Blackview a7 (eu gold version)

Hello everyone,
as its said in title i managed to f*** up my device and cant get out of bootloop.
to explain more ill give some hopefully inportant details:
This was my first root attempt ever(meant without apps like kingroot,kingoroot etc.)
I succesfuly got to unlock bootloader and with fastboot i achieved getting TWRP on it,
after change of twrp language i rebooted the phone(the tutorial i read said to do it)
This is the part when i start to f*** up
My phone rebooted and said :
*Orange Code:
Your device is unlocked and can`t be trusted
Your device will boot in 5 seconds. *
... My first idea was that maybe i was supposed to lock the bootloader back so i did that,that resulted in red code with similiar message about something being off and phone rebooting,so i unlocked it back cause orange > red ,then i googled and discovered that i was supposed to delete all of my data n cache to make sure,so i tried,i got some text about success with cache but data failed with text that it cant find this folder,so i tried to reboot like it didnt said anything about failing(this happens in a lot of software and still manage to somehow workout so i told myself this was the situation),what didnt happen?Orange code again,so i started panic,searched how to restore original rom through fastboot,got some tutorial again telling me to download original rom and file after file flash these,so i tried,it worked until i got to boot.img file,it said that it wasnt boot file at all,so in pure panic and desperateness i procceded to download some recovery.img file in hope that this will do the trick and the original bootloader will recognise it and let me back to my phone,well that was terrible,terrible mistake,now im stuck in bootloop(orange code),cant get into recovery or fastboot by any key shortcut(i tried all i could find up+power,down+power,up+donw+power,just power,nothing works,only thing that happens is that after some time it just shows boot logo and is stuck there)so im desperate,my pc doesnt identify it,fastboot doesnt too,not even adb)so i ask here for help with my sincere pleading and thanks.
Disclaimer:Im sorry if there are some mistakes in text english is not my main language and its my first try to ask for help on technical forum so i hope i didnt done something wrong
Edit:i achieved getting to normal boot logo (seems like kind of random thing will try to get more info how,and in this state its just stuck here doing nothing but device manager recognise it as A7 as it would been normally plugged in exept giving warning (Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)),so that could maybe help that pc recognise its being connected but still nothing further,no fastboot no adb,no sp flash tool