Related
Can someone tell me is the Vu-mate Wireless Charging Receiver Card(www .tylt.com/vu-mate/) compatible with the Note 4?
I'm thinking of buying it together with the TYLT VÜ Wireless Charger
No, it doesn't appear to be compatible. The card needs to be made to fit the phone, and each phone is configured differently- looks like Vu only has them for the S4, S5, and Note 3 at this point. However, there are several Qi receiver cards already on the market for the Note 4, you can get them on Amazon or Ebay pretty easily. From what I've seen this looks like the best option:
http://www.amazon.com/YooTech®-Stan...qid=1415965544&sr=8-1&keywords=yootech+note+4
This one doesn't interfere with NFC (a lot of them stop NFC from working), and it's the only one I've seen that will still allow the S-View function if you want an S-View cover. It's only 0.6mm thick which is about as thin as they get too, and I believe other people here on the forums have already got it and confirmed that it works well.
Of course, you can also always just go with the Samsung branded wireless charging backs, either the standard cover or the S-View one- they're both available in the Samsung store or from other internet sources. The S-View Qi cover is $69.99 and the normal Qi back is $34.99, but if you register your phone with Samsung you get a coupon for 50% off any accessories under $50 from the Samsung store so the normal Qi back ends up only being $17.49, which is a pretty awesome deal. It is a bit thicker than the non-Qi back though, so if you want to use a case you'll probably be better off with the Yootech card.
In any case, all of these options should work just fine with the Tylt Vu, or with pretty much any other Qi charger as well for that matter.
Hi Bojan,
Thank you for contacting TYLT customer support. The VU Mate for the Note 4, we will have it in the middle of December. Please let me know if you have further questions.
Thanks,
--
http://www.samsung.com/us/mobile/cel...EP-CN910IBUSTA
Does anyone who know or own the Samsung Note 4 with the Wireless Charging Back Cover (see link above) know which cases (especially wallet/folio style cases) fill fit with the phone and this wireless back cover as I understand it fits abit thicker then the stock cover?
Thanks
artofwar said:
http://www.samsung.com/us/mobile/cel...EP-CN910IBUSTA
Does anyone who know or own the Samsung Note 4 with the Wireless Charging Back Cover (see link above) know which cases (especially wallet/folio style cases) fill fit with the phone and this wireless back cover as I understand it fits abit thicker then the stock cover?
Thanks
Click to expand...
Click to collapse
I was faced with the problem as you. I ordered the official Samsung wireless charging back, but it would not fit in my Seidio case. I returned the Samsung back and ordered a bare charging coil that will fit under the standard back. No problem with charging or any other functions and it fits in my Seidio case.
Mike
WHich charging coil do you recommend? WOuld it charge at the same rate as the Samsung version? Will I also loose NFC functionality if I did it this way?
mmarquis said:
I was faced with the problem as you. I ordered the official Samsung wireless charging back, but it would not fit in my Seidio case. I returned the Samsung back and ordered a bare charging coil that will fit under the standard back. No problem with charging or any other functions and it fits in my Seidio case.
Mike
Click to expand...
Click to collapse
S View case look nice and work normaly with wireless charging
artofwar said:
WHich charging coil do you recommend? WOuld it charge at the same rate as the Samsung version? Will I also loose NFC functionality if I did it this way?
Click to expand...
Click to collapse
This is the one that I'm using:
http://www.amazon.com/gp/product/B00R3WK2LU?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Not sure about the charging rate compared to Samsung. It is Qi standard so I would guess there is little difference. It claims 600mA. It is NOT a quick charge, more like an overnight charge. I have not tested the NFC part but the answered questions say that it is OK.
I have the same problem with my spigen case, now I got a hold of the s charger back. I'm really torn now, as I love the little stand the spigen comes with, but the official samsung back on the s charger pad wide seems to charge in double quick time.
I see the suggested workarounds and might consider them, but still nobody knows of an actual case which fits the note 4 with the wireless back?
Tromador said:
I have the same problem with my spigen case, now I got a hold of the s charger back. I'm really torn now, as I love the little stand the spigen comes with, but the official samsung back on the s charger pad wide seems to charge in double quick time.
I see the suggested workarounds and might consider them, but still nobody knows of an actual case which fits the note 4 with the wireless back?
Click to expand...
Click to collapse
There is a huge thread in this subforum with a dozen of pages referencing cases that fit the charging back (yes they exist) and various workarounds. Here: http://forum.xda-developers.com/not...se-note-4-samsung-qi-charging-t2958395/page13
I just moved the coil from the Samsung charging back into the regular back, and it's no thicker than it was without the coil, and so any case could continue to fit - whether it will charge through the case is another matter.
any with a 2-3w charge output? 600a would take forever.
StevePritchard said:
I just moved the coil from the Samsung charging back into the regular back, and it's no thicker than it was without the coil, and so any case could continue to fit - whether it will charge through the case is another matter.
Click to expand...
Click to collapse
Moving the coil to the stock back is really the only way to go. It charges fine and the NFC works.
I went for month trying cases that fit that bulge and even the ones that "fit" threatened to pop off at any moment.
Here is a guide to moving the coil:
(HOW-TO) Move receiver coil from OEM Wireless back to stock cover. (LOTS OF PICS)
-Paul
Got in the LG OEM wireless charging back today for the V10. It is of very nice quality and maybe only a hair thicker then stock back, very hard to tell. I don't think there will be any problem fitting into standard cases.
I got it for the everyday low price of $79.00 plus shipping from Amazon.
Only has LG and not V10 on the back corner.
I've add a few pictures showing it side by side with the stock back.
Very cool but also a bit pricey but it's LG oem so your gonna pay a bit more bought a cheap back cover from china with wireless charging that works well only paid about 15 bucks it has a leather back and the fit isn't quite as good as the stock back if you have the money I would definitely get the one you picked
I've used both Yootech and OEM. OEM charges quite a bit quicker and with less heat.
Thanks to the OP's for the information and photo's.
It isn't going to be much different in the quality of the charging, the only different is the built quality, the QI and PMA circuit (PCB) is in the phone, the back cover only contains the coil to complete the wireless charging part.
The current coil use for both the OEM and third party is a flexi coil, isn't the best, it's used because it's thin, I'm going to mod mine when I get the V10 within the week, and put a proper copper strand wire coil, has better detection, less heat and less transmission loss.
I have a few types of coils made especially for wireless charging, and will post back.
you can just buy the Qi receiver sticker for less than $10 and apply yourself.. why would anyone buy this for that price?
cepheid46e2 said:
I've used both Yootech and OEM. OEM charges quite a bit quicker and with less heat.
Click to expand...
Click to collapse
That doesn't make sense, the charging hardware is already built into the v10, 3rd party including OEM is just a coil and connection to the pins. Which should not make a difference in charging speed or heat. Only thing that might affect that is placement and alignment of the back of your v10 to the charging pad..
What are you using to determine charging speed and heat?
EDIT: Attached is my Brown Leather Back with NFC/Qi sticker. (btw is that the British way of spelling chargeing?) I've also ordered NeWisdom's sticker, will review once I get it in and on.
Where did you get the leather charging back from? Is it much thicker then the stock back? Please let me know how the NeWisdom sticker works out. Was going to order one also.
clockcycle said:
That doesn't make sense, the charging hardware is already built into the v10, 3rd party including OEM is just a coil and connection to the pins. Which should not make a difference in charging speed or heat. Only thing that might affect that is placement and alignment of the back of your v10 to the charging pad..
What are you using to determine charging speed and heat?
EDIT: Attached is my Brown Leather Back with NFC/Qi sticker. (btw is that the British way of spelling chargeing?) I've also ordered NeWisdom's sticker, will review once I get it in and on.
Click to expand...
Click to collapse
You are correct to a certain point, both OEM and third party uses a flexi coil with a flexi magnet, the quality of these also determine the detection and aligment.
felloffthetruck said:
Where did you get the leather charging back from? Is it much thicker then the stock back? Please let me know how the NeWisdom sticker works out. Was going to order one also.
Click to expand...
Click to collapse
There on eBay just search connection station on eBay around $15 four different colors there slightly thicker than the stock back you can tell the difference by the volume buttons but not too bad a fit though
I just received my leather back with wireless charging from eBay today and it's not charging at all, is there some setting I need to turn on? I'm using an official Samsung qi charger btw.
timbawolf2k said:
I just received my leather back with wireless charging from eBay today and it's not charging at all, is there some setting I need to turn on? I'm using an official Samsung qi charger btw.
Click to expand...
Click to collapse
There are no special settings that I'm aware of.
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
QMaverick said:
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
Click to expand...
Click to collapse
Just got in the NeWisdom but have not tried it yet.
Here is the OEM wireless charging cover on Best Buy:
http://www.bestbuy.com/site/lg-wireless-charging-back-cover-for-lg-v10-cell-phones-black/4701800.p?id=1219803565680&skuId=4701800
Here is a video of the NeWisdom:
https://www.youtube.com/watch?v=YXmehP0YRp8
QMaverick said:
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
Click to expand...
Click to collapse
I liked the wireless charging on my nexus 6 so when i bought the V10 i had to get wireless charging working on it so i bought the leather qi/nfc back for $15 of eBay (connection station) and it works very well with the Anker qi little disc charger i bought off Amazon but the leather back doesn't fit exactly as good as the stock back there's that little gap by the volume buttons you described but worth it to have the wireless charging working
Yeah, I'm going to give it a few weeks--hopefully the stock one will come out (a more reasonable price would be nice too), or someone will come up with a back cover that's a better fit. A guy can dream, right?
QMaverick said:
I'm fairly irritated at LG for the glacial speed at which they're releasing official accessories for the v10 . . .
Now that that's out of the way, I bought this: http://smile.amazon.com/gp/product/B017R40JRA?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
It's already unavailable (which isn't terribly surprising). It is just a little too thick, which pops the case up a bit over my power/volume buttons (so they're annoying to use). Also, it's pretty much stopped working. I might try to realign the thing, but it worked fine for both NFC and Qi (TYLE Vu) for the first week or so. Now it doesn't reliably charge (though NFC continues to function).
All-in-all, I'd rather pay for an OEM cover, where I SHOULD have to worry less about alignment and having a poor fit.
I'm curious about the NeWisdom though . . .
Click to expand...
Click to collapse
QMaverick said:
Yeah, I'm going to give it a few weeks--hopefully the stock one will come out (a more reasonable price would be nice too), or someone will come up with a back cover that's a better fit. A guy can dream, right?
Click to expand...
Click to collapse
Just wait for Best Buy to have it for $59.00 I'm sure this will be the retail price once it hit's the shelves.
clockcycle said:
That doesn't make sense, the charging hardware is already built into the v10, 3rd party including OEM is just a coil and connection to the pins. Which should not make a difference in charging speed or heat. Only thing that might affect that is placement and alignment of the back of your v10 to the charging pad..
What are you using to determine charging speed and heat?
EDIT: Attached is my Brown Leather Back with NFC/Qi sticker. (btw is that the British way of spelling chargeing?) I've also ordered NeWisdom's sticker, will review once I get it in and on.
Click to expand...
Click to collapse
GSM and the fact that it literally takes twice as long with the Yootech. So a watch is what I'm using to determine the speed. It can and does make sense as it depends on the conduction of the materials used. If yootech uses different metal composition in the coil then it gives off more heat energy and doesn't charge as fast. Welcome to physics.
felloffthetruck said:
Just got in the NeWisdom but have not tried it yet.
Here is the OEM wireless charging cover on Best Buy:
http://www.bestbuy.com/site/lg-wireless-charging-back-cover-for-lg-v10-cell-phones-black/4701800.p?id=1219803565680&skuId=4701800
Here is a video of the NeWisdom:
https://www.youtube.com/watch?v=YXmehP0YRp8
Click to expand...
Click to collapse
That looks pretty nice. Check out my cart here, you can see all my goodies. I'm going with an off brand Spigen clone because I like to use my phone wile it's on the dock and this one looks more stable for that.
I am planning to go with the Yootech back cover. Hopefully it's wont cause the phone to get warm like some others seem to be saying...
For the OEM back, is it able to trickle charge at 100%? On my Nexus 5 at 100% it would just trickle charge and stay connected and cool while keeping the battery full. With my qi leather back I got, it hits 100 disconnects and then reconnects in an endless cycle randomly waking my phone up and keeping it warm. Sometimes my Tylt clone will just shut off completely from the cycling which isn't conducive to having a topped off phone for overnight charging.
Panzer500 said:
For the OEM back, is it able to trickle charge at 100%? On my Nexus 5 at 100% it would just trickle charge and stay connected and cool while keeping the battery full. With my qi leather back I got, it hits 100 disconnects and then reconnects in an endless cycle randomly waking my phone up and keeping it warm. Sometimes my Tylt clone will just shut off completely from the cycling which isn't conducive to having a topped off phone for overnight charging.
Click to expand...
Click to collapse
Bought a little Anker qi disc charger of Amazon for $12 it claims that it regulates the heat and that it doesn't waste energy overcharging i just put my phone on it when i go to bed wake up and it's at 100% and my phones not hot the charger has 2 led's blue when it's charging and red and blue when the phones charged
This wireless charger is one of today's deals on Amazon: http://www.amazon.com/Anker-Wireless-PowerPort-Charging-Qi-Enabled/dp/B00Y839YMU/ref=dp_ob_title_wld
I've heard a pretty substantial amount of good reviews for this charger, so I'm thinking of picking it up since it's only $15. I was also looking into getting an OEM LG wireless charging back, but I'm not willing to pay $50+ for it. Ran across the NeWisdom Qi sticker and it seems to have mixed reviews: http://www.amazon.com/NeWisdom-Wire...sr=8-1&keywords=lg+v10+wireless+charging+chip
Was wondering if anybody has had experience with the NeWisdom Qi sticker. Any overheating? Went bad after a while? Ect.
THE TEAM!!!
ThisIsCheez said:
This wireless charger is one of today's deals on Amazon: http://www.amazon.com/Anker-Wireless-PowerPort-Charging-Qi-Enabled/dp/B00Y839YMU/ref=dp_ob_title_wld
I've heard a pretty substantial amount of good reviews for this charger, so I'm thinking of picking it up since it's only $15. I was also looking into getting an OEM LG wireless charging back, but I'm not willing to pay $50+ for it. Ran across the NeWisdom Qi sticker and it seems to have mixed reviews: http://www.amazon.com/NeWisdom-Wire...sr=8-1&keywords=lg+v10+wireless+charging+chip
Was wondering if anybody has had experience with the NeWisdom Qi sticker. Any overheating? Went bad after a while? Ect.
Click to expand...
Click to collapse
I nominate you to take one for the team. Let us know!
Dont bother...I've tried several wireless charging sticker/Qi combos and it just drains the battery.
dr_w said:
Dont bother...I've tried several wireless charging sticker/Qi combos and it just drains the battery.
Click to expand...
Click to collapse
So i bought the new Wisdom sticker off Amazon. I'll say this--i used a hair dryer as the instruction indicates--and peeled the original NFC only sticker off (or so i thought) and applied the new wisdom. It would register like it was charging but not actually charge as dr_w indicates above.
HOWEVER...frustrated i looked at a couple videos and noticed that the battery doors with the sticker fully removed didn't look like mine. With an exacto knife i picked at the remaining black area only to find there was still copper wire underneath. In effect the original NFC sticker had multiple layers and i'd only peeled off the top. Getting ALL of it up was a challenge...like a real challenge...it did not peel off i had to scrape with a knife for an extended period of time.
At the end of the day though once i had the original sticker all the way off i reapplied the New Wisdom Sticker (which surprisingly survived multiple attempts at reapplying without ill effect). Then setting it on my Spigen charger stand and running the Ampere app i was amazed at how well it was charging. It actually was over 1000ma at one point and after finding it's range (it starts low and builds) it averaged at about 800ma. That was decent enough to charge my phone pretty quick. For reference fast charging is like 1350--1500ma or so. In comparison the Monroy wireless back i bought from Amazon that already had a sticker applied (presumably NOT New Wisdom) typically does maybe 350-500ma.
So the bottom line is it was WAY more of a pain than i anticipated but now i'm stoked and actually rather impressed with the performance.
LEt us know if its consistent. I've had a very similar experience before it began discharging at a rapid rate. Thanks for the post, I'll keep checking back.
Originally had a cheap sticker off eBay that lasted several months, about 3,then the chip in the phone caved out. Got the newisdom the other day and got a Tylt charger to go with 2 Samsung fast chargers and no issues so far. The constant lighting up the phone when it's charged is annoying and the g4 tweaksbox doesn't seem to fix it.
I'm using the OEM LG wireless back and it's quite nice. Feels exactly like the original and fits very flush, no problems with wireless detection on my TYLT charger. I'm actually surprised at how little the back weighs as my understanding is the copper coils should add some noticeable weight but in this case it doesn't. Maybe not that much copper in these OEM backs?
Just ordered an OEM wireless charging back for my V10 (a seller on Amazon has it for $29.99 atm though no prime shipping with the fastest option being expedited shipping) and due to the price, I'd imagine it already being sold out by the time this post is read. I didn't want to get the third party stickers as I want to keep my current back and the third party plastic backs are pretty horrible in terms of feel and fit.
Anyways, what do you guys recommend for a good wireless charging pad? The official Samsung pads look interesting enough as is and I've seen it work with every device with Qi built in or using one of those plug-in Qi pads you place inside a case before the phone though I'm gonna have to wait til my next paycheck to get a pad: already spend a good chunk of cash on an MSI RX 480 and only bought this back due to the steal of a price at $29.99, $36 with expedited shipping. It was that or go with prime and spend $60 on a back
Finally received my OEM wireless back. As expected, the battery door feels exactly like the original back albeit curves near the button cutout due to the extra elevation it adds. Also makes cases a tighter fit if you're concerned about compatibility. Works on my Yootech wireless charger as well as a friend's Samsung wireless charger and Tylt Vu 3, the last two having the best range in terms of surface since the Yootech seems to only have one coil. As for charging, going from 0-100% took about 2-3 hours and the phone got pretty warm too though just a smidgen cooler than it gets when quick charging via cable. The packaging DOES have the description for what would've been a wireless charging variant of the Quickview cover which would attach as a battery door too but I guess that didn't work after all the hullabaloo about the faulty Qi chip. Sucks that the LG logo simply takes place of the rather sexy V10 logo
Either way, I'd recommend getting an OEM back when you can though might wanna wait. Some listing still sell it for $60 a pop and even $100
There don't seem to be any OEM Qi backs left., which is what I wanted. I got an aftermarket one, which is as thin as the stock non-wireless back, but that 1) doesn't fit all that well; there's always a gap at one corner or other, depending on which end I start with when putting it on, and 2) is at least moderately durable.
The one I have is starting to split, 3 months in. It charges fine (800mA at 5VDC, which is better than my Note 3 with OEM charging back)
So... if you are using a wireless charging back, which one are you using, and how do you like it?
BTW, I've been using a number of these wireless charging docks ($10 on amazon) and they're great if you want a spot you can just plonk your phone down and have it charging.
Hello, I'm using this on my phone and it fits and works perfectly.
https://www.amazon.com/gp/product/B01DB899XQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Here is the back I purchased.
https://www.amazon.com/gp/product/B01DB89ACG/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1
I use it with this charger. I read a lot of reviews that the wireless charging is very slow and someone even said it was more like a toy... For me, the wireless charger easily charges my phone as fast as a 1 amp charger. You do have to have a minimum of a 1 amp wall adapter.
https://www.amazon.com/Wireless-Cha...90870&sr=1-11&keywords=wireless++fast+charger
EDIT: I forgot to mention, I use a rubberized case with my phone, so it is rather thick and have no issues using the charger with it.
I think the charger and back that bishop mentioned are fine. I used similar, but I actually stripped the charging circuit out of the back, removed the black plastic cover and put it into a standard (genuine) Samsung back, which I know fits perfectly. In fact, I bought 2 of these backs and stripped out the charging circuit in both. I put one in a standard back and another in a Samsung S-View cover because the Charging S-View cover from Samsung is no longer available. Now I have the choice of either S-View charging or standard back. charging for when I use the VR headset. BTW, looking at the circuit for the backs I used, it looks like NFC is in there as well.
I bought two different Qi receivers (and used the original back), and I regret it. The first one died after a month or two, and the second one heated up the phone while charging and ruined the battery.
So I broke down and bought Samsung's wireless charging back, and it has been working perfectly.
where i can find original oem samsung back QI ?
dhplap said:
Hello, I'm using this on my phone and it fits and works perfectly.
https://www.amazon.com/gp/product/B01DB899XQ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I also use this back, (sold under the h-ber brand name on amazon) and it works fine. Of course the back does fit a little tight, and sometimes, you have to put it on the bottom (near USB port) first, or the clips don't clip.
I have phone in a incipio case which is two layer TPU and polycarbonate and pretty thick, but it charges fine.
https://www.amazon.com/Samsung-Inci...rd_wg=FFUej&psc=1&refRID=S732EGM8V4C7ZNFQBR6C
I have used a samsung fast charging qi dock, and a pleson fast charging dock, which both work fine, but will only charge at normal qi speeds due to lack of qi fast charge support on the note 4.
I get the original one for $60 in my country
d4rkkn16ht said:
I get the original one for $60 in my country
Click to expand...
Click to collapse
BO in my country ...
i'm not able to find it on internet to. It's just fake or aftermarket
dave457 said:
I think the charger and back that bishop mentioned are fine. I used similar, but I actually stripped the charging circuit out of the back, removed the black plastic cover and put it into a standard (genuine) Samsung back, which I know fits perfectly. In fact, I bought 2 of these backs and stripped out the charging circuit in both. I put one in a standard back and another in a Samsung S-View cover because the Charging S-View cover from Samsung is no longer available. Now I have the choice of either S-View charging or standard back. charging for when I use the VR headset. BTW, looking at the circuit for the backs I used, it looks like NFC is in there as well.
Click to expand...
Click to collapse
What are you doing to hold those stripped pieces in place? Is it just packed so tight that you don't need anything or did you attach it somehow?
bagery77 said:
What are you doing to hold those stripped pieces in place? Is it just packed so tight that you don't need anything or did you attach it somehow?
Click to expand...
Click to collapse
I just put the circuit panel onto the phone in the right position and then glue on the cover and then fitted the cover without moving the circuit panel. Press down well and the charging receiver is now glued to the case and in the correct position.
dave457 said:
I just put the circuit panel onto the phone in the right position and then glue on the cover and then fitted the cover without moving the circuit panel. Press down well and the charging receiver is now glued to the case and in the correct position.
Click to expand...
Click to collapse
Thx a bunch for your prompt response. Sorry, what kinda glue is this? I know it gets hot back there and I've never been this best at choosing proper adhesive materials. I'm specifically using this setup for a contraption I found for the gear. I purchased a built in back but don't trust it's quality. Here is the gear contraption. It will be my 4th fan setup but this time, wifi charging is a possibility:
http://m.ebay.com/itm/Samsung-Gear-...885580?varId=422849940618&txnId=1757397302002
bagery77 said:
Thx a bunch for your prompt response. Sorry, what kinda glue is this? I know it gets hot back there and I've never been this best at choosing proper adhesive materials. I'm specifically using this setup for a contraption I found for the gear. I purchased a built in back but don't trust it's quality. Here is the gear contraption. It will be my 4th fan setup but this time, wifi charging is a possibility:
http://m.ebay.com/itm/Samsung-Gear-...885580?varId=422849940618&txnId=1757397302002
Click to expand...
Click to collapse
I just used all purpose glue.
http://www.ebay.co.uk/itm/Bostik-Al...hash=item257277c46d:m:mFfuep7JS04lusjdXPKR7fA
Samsung wireless charging cover on Amazon.
https://www.amazon.com/Samsung-Wireless-Charging-Cover-Galaxy/dp/B00OP5SAAI
bagery77 said:
Thx a bunch for your prompt response. Sorry, what kinda glue is this? I know it gets hot back there and I've never been this best at choosing proper adhesive materials. I'm specifically using this setup for a contraption I found for the gear. I purchased a built in back but don't trust it's quality. Here is the gear contraption. It will be my 4th fan setup but this time, wifi charging is a possibility:
http://m.ebay.com/itm/Samsung-Gear-...885580?varId=422849940618&txnId=1757397302002
Click to expand...
Click to collapse
I used double sided tape when I did mine - not quite as permanent as glue, just in case it moved before the glue set.