Database Info

Can't put my xperia miro in fastboot mode

Hello XDA, i'm having a few problems with my xperia miro.
- i ran the flashtool,
- putted the firmware
- unplugged USB
- turned off phone
- plug the usb again
- held vol - button
and i don't get the fastboot mode, only the flashmode
can anybody help?
thanks

emberkeys said:
Hello XDA, i'm having a few problems with my xperia miro.
- i ran the flashtool,
- putted the firmware
- unplugged USB
- turned off phone
- plug the usb again
- held vol - button
and i don't get the fastboot mode, only the flashmode
can anybody help?
thanks
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/fastboot-buttons
Use vol+ button...

doesn't help either, i don't get any blue led

reinstalling drivers
emberkeys said:
doesn't help either, i don't get any blue led
Click to expand...
Click to collapse
had the same problem with my Xperia e even with the fastboot mode selected in the flashtool.
uninstalling the drivers and reinstalling the drivers helped.
Also for some strange reason if mouse was plugged in the laptop, it didn't work too. Hope this helps.

emberkeys said:
doesn't help either, i don't get any blue led
Click to expand...
Click to collapse
Hm...
Try connecting the pone to the USB cable holding vol+ and in the same moment u connect the phone press power button (just click it, don't hold it more than 1 second)

boot it in system if you can and reboot it from flashtool? -> select fastboot and then reboot to fastboot via adb
Sent from my ST21i using Tapatalk 4 Beta

Okay buddy, I guess the solution is simple....
What does your service menu say??about Boatloader unlock?? Please post what it says..
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..

i did re-install all the drivers
but the blue led isn't still appearing
bump & help please

emberkeys said:
i did re-install all the drivers
but the blue led isn't still appearing
bump & help please
Click to expand...
Click to collapse
can you boot the phone in system (normal boot). use the instructions I gave in the previous post
Sent from my ST21i using Tapatalk 4 Beta

Wait a sec
You said you plugged the usb and then pressed vol button
Well it has to be done simultaneously..
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..

emberkeys said:
Hello XDA, i'm having a few problems with my xperia miro.
- i ran the flashtool,
- putted the firmware
- unplugged USB
- turned off phone
- plug the usb again
- held vol - button
and i don't get the fastboot mode, only the flashmode
can anybody help?
thanks
Click to expand...
Click to collapse
Try doing this...
1. Uninstall Flashtools, PC Companion and SUS
2. Reboot PC
3. Install PCC, SUS and Flashtools
4. Install Flash mode and Fastboot drivers in drivers folder of Flashtools.
5. connect USB Cable to Phone
6. Holding Vol+ button on your xperia device, connect USB Cable to PC.
7. Fastboot drivers will be installed and then phone will go into fastboot mode.

http://forum.xda-developers.com/showthread.php?t=2170114
i did everything as that tutorial is written
but i the blue led didn't appear
can someone help me please

Try this method, take battery out and then plug in usb cable , hold vol+ button and put battery back.

Try this method, take battery out and then plug in usb cable , hold vol+ button and put battery back.
didnt work bro

Dude.. If I am not wrong, flashmode is volume down.. And fastboot is volume up(blue led)
Guess you used the wrong key
Sent from my Xperia E dual using xda app-developers app

mathewsj114 said:
Dude.. If I am not wrong, flashmode is volume down.. And fastboot is volume up(blue led)
Guess you used the wrong key
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
yes i want fastboot and i pressed vol+

If your bootloader is not unlockable,
Then your device will not allow fastboot.. Fastboot can be accessed only by devices with unlockable bootloader.. Verify if you can unlock your bootloader..

Boot problem
Hello Al!
I have a big problem. I wanted install the Gimlo rom in my girlfriend Xperia Miro .I restart CWM mod, use all instruction, and i start install the rom. BUT! the phone firmwares 11.0.A.5.8 :S and the rom is use 11.0.A.5.5. the setup is stoped! i don'n can anything, I have removed the battery.
i dont can flash, because:
05/028/2014 11:28:36 - INFO - Device connected with USB debugging off
05/028/2014 11:28:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
the phone dont start, it's go SONY logo and stoped boot.
PLEASE HELP!!:crying::crying:

[Q] My xperia tipo wont turn on (help)

after trying to install a custom rom, my xperia does not turn on, only thing it does is vibrate when I try and turn the green led to there. I tried the PC Companion and Sony Update Service and does not recognize my phone, and when I connect the phone to a windows with PCC detects a device called: (null) when I see him I'm going to repair the operating system but when I connect it asks not detects it and finally, I tried flashtools but there is no answer.
PD
I've tried removing the battery and sim card

Download flash tool and stock tipo rom and flash it
Sent from my ST21i using xda app-developers app

Check this thread:
http://forum.xda-developers.com/showthread.php?t=2081930

uve got urself a soft bricked tipo my friend :cyclops:

I tryed toO
muham47 said:
Download flash tool and stock tipo rom and flash it
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
yes dude i read this solution all over the places but has i said before my pc can not find my xperia and that is a big problem

au081 said:
yes dude i read this solution all over the places but has i said before my pc can not find my xperia and that is a big problem
Click to expand...
Click to collapse
switch off phone remove battery re insert battery then go in flashmode in flash tool select your xperia stock.ftf file ( Stock firmware ) then connect your device holding Volume down button until it recognises ur device

If the phone vibrates and shows 3 Green or Red LEDs it is hard bricked and sent it in to Sony for Repair

Sometimes that happens me but only remove the battery connect to pc ,insert the battery and the flash starts

muham47 said:
Download flash tool and stock tipo rom and flash it
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
what happens if i again install cm10

ADB Drivers
au081 said:
after trying to install a custom rom, my xperia does not turn on, only thing it does is vibrate when I try and turn the green led to there. I tried the PC Companion and Sony Update Service and does not recognize my phone, and when I connect the phone to a windows with PCC detects a device called: (null) when I see him I'm going to repair the operating system but when I connect it asks not detects it and finally, I tried flashtools but there is no answer.
PD
I've tried removing the battery and sim card
Click to expand...
Click to collapse
sometimes the problem is adb drivers.. search on google and download ....install then connect flashtool..
if u have bootloader unlocked.... Switch on key + (minus) hold both and a green led will lit up..
here the link for help
http://forum.xda-developers.com/xperia-j-e/general/xperia-miro-tipo-flashing-dummies-how-t2246059​

i got the same problem help me pleas
after trying to update from zip file my phone ,does not turn on, only thing it does is vibrate when I try and turn the green led , I tried the PC Companion and Sony Update Service and does not recognize my phone like it doesn't plugged in, even flashtool dosen complet all steps it just complet 2 steps and it stop i dont know what to do ???!!!!!

[Q] How to Unbrick using adb or fastboot?

My Xperia L is not booting even into recovery mode?
Can anyone help!
Newbie here

aeroaks said:
My Xperia L is not booting even into recovery mode?
Can anyone help!
Newbie here
Click to expand...
Click to collapse
Connect your phone to pc while pressing volume down button...
& flash it with flashtool
hit thanks if this helps

mohsinsomeone said:
Connect your phone to pc while pressing volume down button...
& flash it with flashtool
hit thanks if this helps
Click to expand...
Click to collapse
Nothing happens when i connect to PC or simply try to switch on using power button.
I am on linux currently. adb devices and fastboot devices does not list any connected device.

aeroaks said:
Nothing happens when i connect to PC or simply try to switch on using power button.
I am on linux currently. adb devices and fastboot devices does not list any connected device.
Click to expand...
Click to collapse
Sorry Dude I dont know about linux. i'm using windows....
try changing your battery...

can't connect in flashmode

I have the Xperia L (C2105) with latest firmware (.14 not .17 because in my country for some reason .17 is not yet available).\
I am trying to connect into flashmode but I can't.
Phone is accessible throuh Sony PC Companion. When I plug it Windows (7) recognize it .
I am trying with SUS but with no luck.
This is what I do.
(usb cable is plugged into PC)
1. Switch off phone completely. Screen goes black and phone does not respond.
2. Press and hold volume down
3. Insert usb into phone slot.
nothing happens.
I guess I should see led goes green, or phone switching on, or PC showing a pop-up dialog? In any case phone remains off and SUS can't go on to the next step after connection. Is there any problem with the phone?
PS: I also tried factory reset.
Any help would be appreciated.

OK, I managed to connect in flashmode. What I do is press once or twice the power switch while holding volume down.
Isn't it weird?

xpan said:
OK, I managed to connect in flashmode. What I do is press once or twice the power switch while holding volume down.
Isn't it weird?
Click to expand...
Click to collapse
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?

Hi, to be honest, I can't remember. This phone was one of the worst phones I 've ever owned. Camera was blurry, mic was not working. I didn't even bother to fix it. I threw it to the recycle bin. And I always take good care of my gadgets. That phone was the reason not to buy a Sony phone ever again. I now own a LG G2 and I am perfectly happy.
Anyway, I think I remember trying many times until it finally connected. I did various things, but the actual reason it finally connected was luck. Yes, luck. Try it many times and if you are lucky enough, you will manage connection. Or give it to someone else and buy a proper phone.

xperiaxploit said:
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Click to expand...
Click to collapse
First power off the phone.
Then continuously press volume down button while connecting the USB cable to the phone.
(as i remember the phone led color may turned green when it's in flashmode)
Then check 'Flashtool' log, it will be saying 'device connected in flashmode'.
happy flashing.

xperiaxploit said:
Okay, I think i've a similar problem. I cannot connect my device in flashmode. WHenver i try to do, the led just blinks red and then green, then nothing happens. Could you please elaborate how you managed it?
Click to expand...
Click to collapse
Exactly, if you see red, green and then nothing, it means your device is in flashmode. Open up flashtool and get flashing! It will say device connected in flashmode

Agent_fabulous said:
Exactly, if you see red, green and then nothing, it means your device is in flashmode. Open up flashtool and get flashing! It will say device connected in flashmode
Click to expand...
Click to collapse
The flashtool doesn't detect my phone even after the led blinks. But if i connect the same phone to same computer through same usb cable in fastboot, the flashtool says device connected in fastboot. Nothing when in flashmode.

xperiaxploit said:
The flashtool doesn't detect my phone even after the led blinks. But if i connect the same phone to same computer through same usb cable in fastboot, the flashtool says device connected in fastboot. Nothing when in flashmode.
Click to expand...
Click to collapse
Driver issue. In the folder of flashtool, you'll find a sub folder called Drivers, run the file in it and select flashmode drivers and Common Drivers for taoshan. In Device Manager, your device may be listed as S1 Boot service or something. Update device driver to SEMC Flash device which should be under Sony Entertainment Mobile Communications, in all devices.

Agent_fabulous said:
Driver issue. In the folder of flashtool, you'll find a sub folder called Drivers, run the file in it and select flashmode drivers and Common Drivers for taoshan. In Device Manager, your device may be listed as S1 Boot service or something. Update device driver to SEMC Flash device which should be under Sony Entertainment Mobile Communications, in all devices.
Click to expand...
Click to collapse
Thank you so much bro, for all your help. I really appreciate it. I have flashed stock rom hundreds of times over the span of 3 years (yeah i bought the phone as soon as it was released into the market and unlocked the bootloader soon after). So I think I would have know if it was a driver problem. But it's not. It's all about secondary bootloader which I screwed up while installing TWRP into the FOTAKernel partition (which I did not backup the original). For more info, check the link below
http://forum.xda-developers.com/xpe...-flashmode-t3198869/post64859858#post64859858

xperiaxploit said:
Thank you so much bro, for all your help. I really appreciate it. I have flashed stock rom hundreds of times over the span of 3 years (yeah i bought the phone as soon as it was released into the market and unlocked the bootloader soon after). So I think I would have know if it was a driver problem. But it's not. It's all about secondary bootloader which I screwed up while installing TWRP into the FOTAKernel partition (which I did not backup the original). For more info, check the link below
http://forum.xda-developers.com/xpe...-flashmode-t3198869/post64859858#post64859858
Click to expand...
Click to collapse
Hmm, that's new. I didn't think such a thing could happen. Thanks mate!

Sony Xperia M2 (D2303) NEED FLASTOOL DRIVERS

I've a big problem with flashtool. I want to flash a rom (sony official 4.3) with flashtool, but when i plug on my phone it says that: The drivers need to be installed, and i can found it in the drivers folder.
I go there and open the drivers.exe and i don't found Xperia M2 in the list.
Then I install all of them and try to flash the rom but it says the same. Please help me I NEED THE DRIVERS. :crying:
(Sorry for my bad english)

First of all are you using windows 8 or 7? If on 8/8.1 you need to disable driver signature enforcement. Second, there is driverpack provided with the flashtool in separate folder, install them. Install the following drivers: Fastboot, Flashmode and every driver that starts with Common (Common Blue 1.0, Blue 3.0 etc.). Also you can download PC Companion which automatically installs the drivers for your phone.

I use win 8.1. I do it all but i get the same message.

Yesterday I try to flash it on Win 7 but it was the same

gy.krisztian04 said:
Yesterday I try to flash it on Win 7 but it was the same
Click to expand...
Click to collapse
The phone is detected but somethings wrong with the flash drivers. Do you hold the volume down button for a long time or press another button along with it?

I press the volume down and the power button at the same time.

gy.krisztian04 said:
I press the volume down and the power button at the same time.
Click to expand...
Click to collapse
That's the problem. Press the volume down and while pressed, plug it in PC. It should blink green and leave it to flash the firmware

DavidMKD said:
That's the problem. Press the volume down and while pressed, plug it in PC. It should blink green and leave it to flash the firmware
Click to expand...
Click to collapse
Thank you! It's working