Related
Hello XDA, i'm having a few problems with my xperia miro.
- i ran the flashtool,
- putted the firmware
- unplugged USB
- turned off phone
- plug the usb again
- held vol - button
and i don't get the fastboot mode, only the flashmode
can anybody help?
thanks
emberkeys said:
Hello XDA, i'm having a few problems with my xperia miro.
- i ran the flashtool,
- putted the firmware
- unplugged USB
- turned off phone
- plug the usb again
- held vol - button
and i don't get the fastboot mode, only the flashmode
can anybody help?
thanks
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/fastboot-buttons
Use vol+ button...
doesn't help either, i don't get any blue led
reinstalling drivers
emberkeys said:
doesn't help either, i don't get any blue led
Click to expand...
Click to collapse
had the same problem with my Xperia e even with the fastboot mode selected in the flashtool.
uninstalling the drivers and reinstalling the drivers helped.
Also for some strange reason if mouse was plugged in the laptop, it didn't work too. Hope this helps.
emberkeys said:
doesn't help either, i don't get any blue led
Click to expand...
Click to collapse
Hm...
Try connecting the pone to the USB cable holding vol+ and in the same moment u connect the phone press power button (just click it, don't hold it more than 1 second)
boot it in system if you can and reboot it from flashtool? -> select fastboot and then reboot to fastboot via adb
Sent from my ST21i using Tapatalk 4 Beta
Okay buddy, I guess the solution is simple....
What does your service menu say??about Boatloader unlock?? Please post what it says..
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..
i did re-install all the drivers
but the blue led isn't still appearing
bump & help please
emberkeys said:
i did re-install all the drivers
but the blue led isn't still appearing
bump & help please
Click to expand...
Click to collapse
can you boot the phone in system (normal boot). use the instructions I gave in the previous post
Sent from my ST21i using Tapatalk 4 Beta
Wait a sec
You said you plugged the usb and then pressed vol button
Well it has to be done simultaneously..
Hit the thanks button instead of telling it....
thank you
sent from my Xperia E dual C1604..
emberkeys said:
Hello XDA, i'm having a few problems with my xperia miro.
- i ran the flashtool,
- putted the firmware
- unplugged USB
- turned off phone
- plug the usb again
- held vol - button
and i don't get the fastboot mode, only the flashmode
can anybody help?
thanks
Click to expand...
Click to collapse
Try doing this...
1. Uninstall Flashtools, PC Companion and SUS
2. Reboot PC
3. Install PCC, SUS and Flashtools
4. Install Flash mode and Fastboot drivers in drivers folder of Flashtools.
5. connect USB Cable to Phone
6. Holding Vol+ button on your xperia device, connect USB Cable to PC.
7. Fastboot drivers will be installed and then phone will go into fastboot mode.
http://forum.xda-developers.com/showthread.php?t=2170114
i did everything as that tutorial is written
but i the blue led didn't appear
can someone help me please
Try this method, take battery out and then plug in usb cable , hold vol+ button and put battery back.
Try this method, take battery out and then plug in usb cable , hold vol+ button and put battery back.
didnt work bro
Dude.. If I am not wrong, flashmode is volume down.. And fastboot is volume up(blue led)
Guess you used the wrong key
Sent from my Xperia E dual using xda app-developers app
mathewsj114 said:
Dude.. If I am not wrong, flashmode is volume down.. And fastboot is volume up(blue led)
Guess you used the wrong key
Sent from my Xperia E dual using xda app-developers app
Click to expand...
Click to collapse
yes i want fastboot and i pressed vol+
If your bootloader is not unlockable,
Then your device will not allow fastboot.. Fastboot can be accessed only by devices with unlockable bootloader.. Verify if you can unlock your bootloader..
Boot problem
Hello Al!
I have a big problem. I wanted install the Gimlo rom in my girlfriend Xperia Miro .I restart CWM mod, use all instruction, and i start install the rom. BUT! the phone firmwares 11.0.A.5.8 :S and the rom is use 11.0.A.5.5. the setup is stoped! i don'n can anything, I have removed the battery.
i dont can flash, because:
05/028/2014 11:28:36 - INFO - Device connected with USB debugging off
05/028/2014 11:28:36 - INFO - For 2011 devices line, be sure you are not in MTP mode
the phone dont start, it's go SONY logo and stoped boot.
PLEASE HELP!!:crying::crying:
hello,
my xperia has the volume keys broken so I can not make it go flashmode.
with an app I flashed a kernel but now it will not turn more, and I can not install another one because I can not access the mode flashmode.
Now you do not log more, when I try and just makes a small vibration.
When I connect to the PC, the LED flashes red and the pc does not detect it.
Flashtool does not detect it
how can I do?
thank you very much
matt_bolo said:
hello,
my xperia has the volume keys broken so I can not make it go flashmode.
with an app I flashed a kernel but now it will not turn more, and I can not install another one because I can not access the mode flashmode.
Now you do not log more, when I try and just makes a small vibration.
When I connect to the PC, the LED flashes red and the pc does not detect it.
Flashtool does not detect it
how can I do?
thank you very much
Click to expand...
Click to collapse
at least the volume key must be function
flashtool need proper driver especially for windows 8 to detect Xperia L (google it for installing driver for windows 8)
just flash tft using flashmode, then plug usb device and press power + volume down
yes, but i can't put it in flasmode because i have the volume's buttons broken.
there is another method for put it in flashmode?
matt_bolo said:
yes, but i can't put it in flasmode because i have the volume's buttons broken.
there is another method for put it in flashmode?
Click to expand...
Click to collapse
Yea the other way is...... Give your phone for repairs!!!!! :-/
Sent from my C2104 using XDA Premium 4 mobile app
I'm not an expert, but there a possibility using adb?
matt_bolo said:
I'm not an expert, but there a possibility using adb?
Click to expand...
Click to collapse
u already mention that it doesnt detect by the computer so der is no chance that u can get it too flashmode via adb.
Q&A for Xperia C bricked while flashing recovery through mobile uncle
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Xperia C bricked while flashing recovery through mobile uncle. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
HELP! Xperia C Stuck on Sony Logo
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Sony Xperia C Unbrick
Hi... I came across this problem recently while installing CWM using MobileUncle Tools without changing the Boot-version. If your Boot-version is not supported, then you need to first convert it to the suitable Boot-version. There is a seperate Xperia C XDA thread on install CWM on both the Boot-versions. Now in your case, you have flashed a wrong recovery which has bricked your device.
Here is a step-by-step guide on how to un-brick your Xperia C. This worked for me. Hope it works for you too...
1. Firstly, remove the back-cover of your Xperia C and remove any sim or memory card, if connected.
2. Now, search for a small hole with "RESET" written below it.
3. Use a pen to press it. Hold it there for a minute. Then leave it and put the back cover back.
4. Charge your device for about 10 minutes.
5. If you do not follow the above steps, you won't be able to repair your device through PC Companion.(The update stops showing "Download error or error 1200). This is because your device still has MobileUncle Tools and unsupported Recovery image installed in it which does not allow the stock Recovery to be installed. When you reset by following the above method, only the stock apps are left in the device, deleting every other app.
6. Now download and install the latest Sony PC Companion from the official site, to your PC.
7. Open the PCC and click start in support zone. Let PCC download and install the required files.
8. In the next menu, select the software update option. Instead of clicking on install, select "Repair" device which is highlighted in blue.
9. Follow the steps until PCC starts to prepare your PC for software update.
10. In the device selection menu, select Sony Xperia C C2305 and click next.
11. When the next menu appears, disconnect any USB or multimedia drives attached to the PC. Now, first connect your original Sony USB cabel to the PC. Then, turn off your device(If the device is not turning off i.e. switching on after connecting the USB cable, read the instructions given at the end). Wait for five second. Press and hold volume down button of your device and connect the USB cable to your device. A green led appears on your device if the device is connected properly.
Note: If a continous red led appears instead of green, do not worry. Keep the device connected to PC intact for about 5 to 10 minutes. It will turn green. This is because, bricked devices take some time to be recognised.
12. Now the update process starts. If all the above steps are performed correctly, then surely the Device Software Update process completes without any errors or stopping in between.
13. Then click finish in the last menu after Device Software Update Completes.
14.Disconnect Xperia C from PC and press the Power button.
15. Xperia C boots up. Do not worry if your screen isn't the way it should be(e.g. whitish at the edges and the Sony Wave logo lagging). As this is the first boot-up after software update it takes sometime to recover to it's earlier charm. After about a minute or two, your device will be perfectly all right.
Note: The first boot-up takes some time(about 5 to 7 minutes).
16. So, this is it. You will have your Sony Xperia C perfectly working if you follow the above steps cautiously.
Hint for step no. 11: Follow this only if your device turns on after connecting the USB cable:
1. First, let the USB cable be connected the PC.
2. Force switch off your device by pressing Power + volume up buttons for about 10 to 15 seconds when it is stuck at Sony logo.
3. When the device turns off, immediately leave the two buttons and press and hold volume down button and connect the USB cable to the device, before the device turns on.
4. Now your device would be properly connected and the green led appears.
Hope this helps you. If you have any other queries regarding the same, please do inform.
my Xperia C is switchoff while flashing recovery from mobile uncle tools
I have downloaded the file 6mb recovery.img file and through mobile uncle tools i was updating... all was going well it ask me r u sure to flash i pressed ok and my phone became dead ...Now it is not starting....!!!!Plzzz Help me ....!!!:crying:
verondelarosa said:
Hello guys, can you help me fix my Sony Xperia C 2305 stuck in Sony Logo.
I'd already tried the Sony Companion but in the middle of installation it stopped.
What should i do?? Please! Thank you!
Click to expand...
Click to collapse
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
relly helped ,me guys thanks buddie
thanks bro, i m happy now my phone is working again
I hope it was useful (if it was so hitthank)
Just I want from you I little thing : give the link that you have download th ftf. from
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
my flashtools shows drivers not found please help.
rkumbhar said:
my flashtools shows drivers not found please help.
Click to expand...
Click to collapse
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
n78 shadow said:
Hi bro
You must install the flashmode, fastboot driver and your device driver in flashtool\drivers\Flashtool_drivers.exe
DON'T forget to install your device driver AND to hit thanks
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
i installed all the drivers but still sony xperia c not getting detected
rkumbhar said:
i installed all the drivers but still sony xperia c not getting detected
Click to expand...
Click to collapse
It's not detected when Flashtool requests to connect the phone or not at all
If it's not detected when Flashtool requests to connect the phone try to connect it before the flashing proccess.
And don't forget to connect it in flashmode by holding the vol- key and connect it to Pc
Phone still not detected in Fastboot mode
I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.
fixed
OTE=ajithmemana;61619257]I have installed all the drivers and tried. But my phone is not entering Fastboot mode or showing up in device manager. My phone is not turning on after flashing recovery using Mobile Uncle tools. The red light glows when usb plugged in.[/QUOTE]
Ok don't worry I have the same problem before because I using Mobile uncle without change boot version thast leave the phone in charge sometimes after that connect it in the pc by cable then run PC combain it will guide you to connect the phone when the red light appear and download the original software as you know it will tell you to press the power key with the volume key until the phone connect with the program .
It work with me tell me if not
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
My Sony xperia C2305 ......keeps on Restarting.....plz help me...
Unable to flash to...through "wmshua"...it gives me an error..."FLASH FAILED" and some times "CONNECTION UNSTABLE"
AND Also tried "Flash Tool" too.....it gives me an error ..........plz help
probably my phone is bricked because i tried using mobile uncle and opened up a recovery image downloaded from this site.. but now my phone is not booting... neither is giving any light while i plug in the USB
HELP ASAP
did not work for me xpria pc companion gives an error when i use software update .... after a big wait ... of initializing ... and the device alwayes gives red light ... for a time then after 10 miniutes it turns off .... i don't know what to do .. !!!
n78 shadow said:
It's so easy to fix it.:thumbup:
You've entered in something called "bootloop".
Now how we can fix an xperia device from bootloop.
What do we need:
1,A computer with flashtool installed on.
2,A good USB cable (because we don't want the dvice to disconnect in the middle of the flashing process ).
3,download c2305 stock firmware .ftf (stock rom.ftf).(from the link below)
Now follow these steps and they will bring your phone to the safe:
1,turn off your device and keep it off and don't forget to charge it well before this process.
2,Replace the stock firmware.ftf to firmware folder in the flashtool folder in the place you installed in (usually in c:\\flashtool\firmwares)
3,Now open flashtool and click the flash icon then select flashmode then OK.
4,Now select your firmware from the list and if you don't want to lose your data just uncheck the box of wipe data in the top right corner.
5,click on "flash" and wait because it's preparing.
6,Then after this it will show you a window request to press the back bottom (the volume down bottom)
And connect your device, do it and Keep pressing until the window disappear.
7,Now the tool is flashing your phone DON'T touch the cable until it's finished.
8,when it's finished wait for 10 sec and unplug your device.
9,Now wait for about one min if it doesn't turn on automatically turn on it will about 3min to boot wait and don't worry.
Congratulations your phone is well know.
Notes:
1.If the tool doesn't see the connected device, there's a folder named "drivers" open and open the. Exe
And install your device's driver.
2, because I'm new user they don't allow me to give a link so just give me your email and I'll send the link to you.
(the stock firmware.ftf link i mean)
DON'T FORGET TO HIT THANK :thumbup::thumbup:
Sent from my C2105 using XDA Free mobile app
Click to expand...
Click to collapse
Can you send me the link please [email protected]
Hi,
I have tried booting into flashmode > 20 times now, but can't get it to work.
I am doing the following:
- Disconnect USB-Cable
- Poweroff Phone
- Press Volume Down Button
- Connect USB-Cable
Now the LED blinds red/green very quickly, but then the phone just boots normally, beginning with the white screen with the Sony Logo and the Xperia Logo. If I keep holding the Volume Down Button, it boots into safe mode.
Any ideas what I may be doing wrong going into flashmode? Is there another way to get into flashmode?
The device is encrypted, maybe that has something to do with it?
Is it at all possible that this is because of a missing driver? I did install the flashmode driver using flashtool.
Thanks
Yannik
It does sound like a driver issue.
Make sure you have the Latest version of Flashtool installed, and try the driver installer again.
On your phone, in Developer options (enabled in the Settings main menu by going to Settings > About phone > and tapping Build number 7 times) , make sure you have USB debugging turned on, and I also allow mock locations. You must have Unknown Sources ticked in Security settings too.
I have successfully flashed mine this way.
Before you start Flashtool, turn the phone off, hold volume down, and plug in the USB lead to your computer. The LED on the phone should turn a solid green. The computer should sort out the drivers itself.
If you're above Windows 7 then there are other things you have to do to get the drivers to install properly, or so I've heard, but I don't know for sure as I refuse to leave 7 behind. I hate the tiles in Windows 8, and I guess in 10 too.
Once that's done, you're good to go with Flashtool.
Guessing the encryption has something to do with it.
It actually seems to have been some kind of driver issue.
The flashtool drivers are installed (activated the non-signed driver installation), as well as the sony pc companion software. Unfortunately, I could not resolve this issue and get flashmode to work on Windows 8.1 x64.
However, flashmode did work (without any driver installation!) on a Linux Mint system.
yannik~ said:
It actually seems to have been some kind of driver issue.
The flashtool drivers are installed (activated the non-signed driver installation), as well as the sony pc companion software. Unfortunately, I could not resolve this issue and get flashmode to work on Windows 8.1 x64.
However, flashmode did work (without any driver installation!) on a Linux Mint system.
Click to expand...
Click to collapse
I have been trying to use flash tool to put on debranded software. I simply cannot get it in flashmode. It will not read the new firmware or allow me to select anything.
When I try to install the drivers, found in flashtool folder it does not allow me, comes up with error
http://www.flashtool.net/win8drivers.php
Sent from my E6653 using Tapatalk
adamz5 said:
When I try to install the drivers, found in flashtool folder it does not allow me, comes up with error
Click to expand...
Click to collapse
Have you booted Windows in “Disable driver signature enforcement” mode?
From: http://www.xperiablog.net/2015/03/1...peria-lollipop-using-xperifirm-and-flashtool/
Note: To install the Flashtool drivers for Windows 8/Windows 8.1, please follow the steps below.
1) Press the Windows key + R and in the run box type: shutdown.exe /r /o /f /t 00
– Now make the following selections to boot into the Start Up Setting Screen: Troubleshoot > Advanced options > Start Up Settings > Restart
– Then, when the machine restarts, select number 7 i.e. “Disable driver signature enforcement”. Your machine will start with Driver signing enforcement disabled until the next reboot.
2) Now you can install the Flashtool drivers.
– Windows will warn that the driver is not signed and will require you to confirm the installation.
– Once the installation is complete, reboot the machine
Click to expand...
Click to collapse
Haha I forgot that you need USB debugging and unknown source on, when I did flash with flashtool it stops half way saying USB debugging and unknown source to be turn on, kinda soft bricked my phone had to repair with pc companion oooops
mine just turns green for a fraction of a second and then boots, while flashtool tells me i should be in usb debugging mode, even thought it is set as such from the dev options.
Any suggestions? I keep the vol down button pressed until about 1 second after plugging the cable. i tried even for a longer period, the led turns green for half a second and then nothing.
barkohba said:
mine just turns green for a fraction of a second and then boots, while flashtool tells me i should be in usb debugging mode, even thought it is set as such from the dev options.
Any suggestions? I keep the vol down button pressed until about 1 second after plugging the cable. i tried even for a longer period, the led turns green for half a second and then nothing.
Click to expand...
Click to collapse
Does the phone still boots or it stuck somewhere?
Sent from my E6653 using Tapatalk
Driver
In my case, it doesn't show up the driver for Xperia Z5, just until the Z3, not even for Z3+, and I dont know where to find the correct driver for Z5, and I have downloaded the lastest version of Flashtool.
Does anyone know what can I do?
I've got the same problem as yours. I wanted to debrand my xperia z5, I created the ftf file to flash with flashtool but I can't get the flash mode... going in the flashtool download page I've noticed that it says: 0.9.19.0 was valid for ZL,Z1,Z2,Z3,Z3c,Z3+/Z4,Z4Tablet,E4,E4G,M2,M4 because of new FSC feature added --> our device doesn't appear in the list so I think we have to wait for a little. It's my opinion...sorry for my bad english, I'll stay tuned for further information
Flashtool latest version is 0.9.19.10 and does support Z5 once you patch x10flasher.jar:
http://www.flashtool.net/downloads.php
To apply the 0.9.19.10 patch, you must be on 0.9.19.2, 0.9.19.3, 0.9.19.4, 0.9.19.5, 0.9.19.6, 0.9.19.7, 0.9.19.8 or 0.9.19.9 and replace x10flasher.jar with the one from the patch.
doum89 said:
I've got the same problem as yours. I wanted to debrand my xperia z5, I created the ftf file to flash with flashtool but I can't get the flash mode... going in the flashtool download page I've noticed that it says: 0.9.19.0 was valid for ZL,Z1,Z2,Z3,Z3c,Z3+/Z4,Z4Tablet,E4,E4G,M2,M4 because of new FSC feature added --> our device doesn't appear in the list so I think we have to wait for a little. It's my opinion...sorry for my bad english, I'll stay tuned for further information
Click to expand...
Click to collapse
Install Sony PC Companion and connect your Z5. Normally drivers should be installed now. There not included in Flashtool yet.
anyway I wanted to flash a stock firmware (since I'm branded). I've downloaded the firmware, created the ftf file with flashtool, downloaded the drivers ( with pc companion and also with the .exe inside the flashtool directory) but wen it asks for holding the volume down and plug the device it boots (as the problem the others has). Any Ideas? I've tried to hold the volume up and then plug the phone but it doesn't work, flashtool don't start the process
try flashing on a linux system.
I'll try (I have to find a pc running linux first) but I think that should be a problem of the device, I maen the buttons combinations seems inappropriated on this terminal since it restarts...It's my honest opinion (and I seize the moment to remember you of my bad english)
I had the same problem, for me trying it from linux (you can dual boot) fixed the problem. Must have been a problem with my windows installation.
Do you suggest to full wipe or not?
I didn't perform a full wipe and didn't have any problems.
I tried flashing phone with custom ROM ([ROM][XL] StryFlex™ Marshmallow v1.0 | Official Sony Xperia UI) .
But phone didn't boot for 2 hours and I removed the battery and tried to turn on but while pressing the power button , it keeps on vibrating for short time in certain intervals.
No Sony logo comes and No recovery menu pops up.
Also Sony companion also doesnot recognized the device. But Blue light keeps blinking while pressing Up + Power button while plugging in USB cable but nothing happens.
Try pressing volume up when plug in usb cable and see if blue led glows?
Yes It does.
Yeah , It does change into blue.
newguyknowsnothing said:
Try pressing volume up when plug in usb cable and see if blue led glows?
Click to expand...
Click to collapse
Does flashtool recognize the device?
Driver issues
No it doesnot , It says driver not found. In device manager it shows something s1boot device or something like that. I tried installing different drivers but didn't work out.
newguyknowsnothing said:
Does flashtool recognize the device?
Click to expand...
Click to collapse
kebib said:
No it doesnot , It says driver not found. In device manager it shows something s1boot device or something like that. I tried installing different drivers but didn't work out.
Click to expand...
Click to collapse
I think I had your problem once but I can't remember how I fixed it. I think it has something to do with windows updates, like you need to disabling it. I'm not sure, I hope it will help you. If not then there is nothing I can do.
kebib said:
No it doesnot , It says driver not found. In device manager it shows something s1boot device or something like that. I tried installing different drivers but didn't work out.
Click to expand...
Click to collapse
Try to use flashtool 0.9.11. And install drivers for "taoshan board". They are in the flashtool`s installation directory. If the blue led still flashes that means you connect it in flashmode which is a good thing.
Everytime I try to install the that driver , it says Install failed.
noobp said:
Try to use flashtool 0.9.11. And install drivers for "taoshan board". They are in the flashtool`s installation directory. If the blue led still flashes that means you connect it in flashmode which is a good thing.
Click to expand...
Click to collapse