Database Info

Moto G Update Error!

I have Moto G XT1033 which was rooted using Modaco's PaulOBrien method. Now i need update it from 4.4.2 to 4.4.4 with OTA. I have received update notification but when i try to install it gives Error.
What should i do ? How can i update to 4.4.4 without formatting the data.

lkhz said:
I have Moto G XT1033 which was rooted using Modaco's PaulOBrien method. Now i need update it from 4.4.2 to 4.4.4 with OTA. I have received update notification but when i try to install it gives Error.
What should i do ? How can i update to 4.4.4 without formatting the data.
Click to expand...
Click to collapse
Not sure if this helps?
http://forum.xda-developers.com/mot...g-to-4-4-4-t2823106/post54377340#post54377340
If you've flashed a custom kernel its the most likely reason for the problem in my experience, but also I think CWM and TWRP don't handle the OTAs well (Philz recovery does). So you need to be on Philz or stock recovery (which will mean re-rooting afterwards if you go stock) and stock kernel for your region.

russtyd said:
Not sure if this helps?
http://forum.xda-developers.com/mot...g-to-4-4-4-t2823106/post54377340#post54377340
If you've flashed a custom kernel its the most likely reason for the problem in my experience, but also I think CWM and TWRP don't handle the OTAs well (Philz recovery does). So you need to be on Philz or stock recovery (which will mean re-rooting afterwards if you go stock) and stock kernel for your region.
Click to expand...
Click to collapse
No i didn't flash anything. Just bootloader unlocked and rooted with this method - http://www.modaco.com/topic/366771-root-your-moto-g-option-1-superboot

[Q] Unlocked XT926, can't flash custom recovery

Help! I cannot flash a custom recovery onto my phone (Verizon/RAZR Maxx HD). I used to have SafeStrap installed and it worked fine. One day I took a OTA update and lost root. So I used RSD Lite to re-flash my stock partition so I could take advantage of Towelroot and Motopocolypse while they still worked and was successful in doing both. So my phone was unlocked and rooted again and I was so happy I just used it as is for a few months. Later on, on decided it was time to try a new ROM, at which point I attempted to flash CWM recovery and it failed. So then I tried flashing SafeStrap again, and now that also failed. Then, in the process of troubleshooting failure to flash a custom recovery I managed to unroot myself (thanks to someone's bad advice). ... And of course this happened after I already took the OTA update that patched the towelroot exploit. So now my phone is Unlocked but not rooted anymore. I still cannot flash CWM (which is what I'd like to do) and use a custom ROM. Any helpful advice or constructive feedback would be greatly appreciated... Thanks!
Currently on Android 4.4.2, System Version 183.46.15.xt926.Verizon.en.US

Are you sure you are unlocked? Boot into your fastboot screen and tell us what it says. If you are unlocked, it's easy to regain root. Flash a recovery (try TWRP since CWM seems to not work) and flash a SU zip.
Sent from my HTC6525LVW using Tapatalk

Same Issue
Apparently they slipped in a fix for towelroot because I losr root. Still have an unlocked bootloader thanks to motopokalyse. I actually jacked my stock recovery and am working on fixing now. I'll let you know if I get it fixed and can flash a recovery.

[Q] Help! Advice needed for getting OTA Lollipop

I see many noobs like me being confused about how their root and custom recovery status should be before installing or even receivingLollipop OTA.
So my understanding is to receive OTA update and to successfully install it one needs to be on,
1. STOCK firmware of their respective device.
2.Custom recovery ( No TWRP, CWM or any other custom recovery ).
3.Bootloader should be locked.
Am i right?
So, my questions are,
1. I can understand why the first two needs to be done but why should we lock the bootloader?.
2. When i restored to stock firmware( Mine's XT1033 ) KK 4.4.4 from TWRP Recovery with this http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-rom-collection-t2854688 TWRP was still installed on my mobile.But when i reverted to stock 4.4.2( not 4.4.4 ) from fastboot using this http://forum.xda-developers.com/showthread.php?t=2700502 it successfully deleted TWRP.
So when we flash Stock ROM with Zip file it only installs the stock ROM and won't delete TWRP? and when we flash with fastboot( and .xml.zip file ) it removes TWRP? So am i right with this assumption?
If i am right how do i get back to stock recovery( delete TWRP ) since currently i have Stock 4.4.4 from the above link.
Help me and provide some correct scenarios to get Lollipop OTA.

this mototool has a functionallity of retrieving stock recovery
http://forum.xda-developers.com/showthread.php?p=50029015
it's pretty straight forward.
and as of what I've read, no need to relock bootloader for OTA to take place.. but I have no experience whatsoever..

[Q] How to come back to stock RECOVERY?

hi,
I have Lolipop 5.0 in my Moto G + root + TWRP. I received the 5.0.1 OTA but of course I can't apply the update because of TWRP. I read (here) that I need to come back to stock recovery to apply the update. I'll loose root access but that's ok, I'll root again later. My question is: how do I come back to stock recovery?
Thank you.

The same way you flash twrp.

kiko321 said:
The same way you flash twrp.
Click to expand...
Click to collapse
to flash TWRP I download the lastest version of TWRP on their website. How can I do the same with stock recovery???

There are links here where to download stock recovery. Can't browse the forum now. But i too have downloaded the stock from a post here. Hope it helps.

kiko321 said:
There are links here where to download stock recovery. Can't browse the forum now. But i too have downloaded the stock from a post here. Hope it helps.
Click to expand...
Click to collapse
can't find XT1032 Lollipop stock recovery on XDA, I guess I'll have to open a new thread to ask... I flashed 4.4.4 stock recovery (through MotoTool AIO software) but I haven't been able to flash 5.0.1 update then. So I think 5.0 stock recovery is required to update to 5.0.1.
Thanks for your help.
If by chance you have the link to XT1032 5.0 stock recovery, please post it!

mehcoib said:
can't find XT1032 Lollipop stock recovery on XDA, I guess I'll have to open a new thread to ask... I flashed 4.4.4 stock recovery (through MotoTool AIO software) but I haven't been able to flash 5.0.1 update then. So I think 5.0 stock recovery is required to update to 5.0.1.
Thanks for your help.
If by chance you have the link to XT1032 5.0 stock recovery, please post it!
Click to expand...
Click to collapse
I guess you're using custom rom so restore to STOCK ROM .
Follow this guide (at the end dont flash any custom recovery) Stock recovery XT1032
Automatically you'll get stock recovery

Megatron27 said:
I guess you're using custom rom so restore to STOCK ROM .
Follow this guide (at the end dont flash any custom recovery) Stock recovery XT1032
Automatically you'll get stock recovery
Click to expand...
Click to collapse
no, I'm using stock ROM, with TWRP + root, that's it. So I just need to stock recovery to apply OTA update.
But thanks for the link, I understand how to use it to come back to stock recovery. Except... that this guide is for XT1033. Do you think I can use recovery.img XT1033 image file to flash my XT1032?

[Q] Help upgrading to KKBL. OTA or Flash?

Hi,
It's been years that I've been living with the XT925 on CM11 JBBL and as I've been following latest developments on CM 12.1 and want to give it a try.
I've been searching for the past week on how to safely perform the bootloader upgrade so I can flash CM12.1. As it turns out there is a lot of disperse information on how to do it, followed by scary cases of soft bricked devices.
Current device status:
- Bootloader Unlocked
- Rooted
- CM11 M12 JBBL
- Everything works fine
What I already know:
- I have to Unroot my device
- Need to flash stock 4.1.2
- Must check if everything works once in stock
What I need help:
- Should I download OTA via the stock firmware?
- Should I flash stock recovery?
- Should I perform the update from the device or should I extract the OTA and change something and then flash it manualy?
- Is there any tutorial that I should've found on my searches?
On a sidenote: is there any chance of my bootloader to be relocked and/or loose any chance of future root access due to the OTA?
I believe that as people realise that CM12.1 is stable some noob friendly thread to the ancient JBBL's out there would be much apreciated.
Thanks in advance!

If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.

RikRong said:
If I were you, I would just flash straight to KK with RSD or House of Moto. If you go this route, you won't need to flash back or reinstall stock recovery. Flashing the FXZ will reinstall stock recovery, but if you use House of Moto you can use an option to flash aftermarket recovery. Flashing shouldn't relock your boot loader, either.
Click to expand...
Click to collapse
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.

Can you find the firmware on MotoFirmware.com, when it's actually up?

Try this: http://motofirmware.center/files/

dirceucorsetti said:
In order to flash straight to KK I need to obtain it via OTA download while in Stock JB.
I haven't found any KK image laying arround, so this might be the only route.
Any other advices will be much apreciated RikRong.
Click to expand...
Click to collapse
The only one firmware for xt925 available is from Canda Retail, here is the link