Related
can cm9 be flashed with stock kernel on x8 without bricking the phone.
ICS
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
i don't think that rom is for stock kenel .
i am myself said:
i don't think that rom is for stock kenel .
Click to expand...
Click to collapse
can u please tell any rom which uses stock kernel
thanks
muftiazan said:
---------------------------------------------------------
Req.
A rooted Phone
Clock Work Mod Recovery (installed)
---------------------------------------------------------
What Works ?
---------------------------------------------------------
1. Full hardware acceleration (the ICS way)
2. Opengl rendering
3. MiniCM Update notifications via c2dm (Settings -> System -> Update notifications)
4. In kernel ClockworkMod recovery v5.0.2.3 and option to reboot into Recovery
5. Modular Undervolting handled Settings -> Performance menu (by default not active)
6. Extra Settings display option for Ultra brightness, also handled via notification bar icons
7. Smooth 2D scrolling in menus
8. Native Wifi Hotspot
9. Native USB tethering
10. Native Bluetooth tethering
---------------------------------------------------------
What Does not Work?
---------------------------------------------------------
1. Camera
---------------------------------------------------------
Steps
---------------------------------------------------------
1. Download the ROM file from here :
2. Connect your phone to the PC via USB Cable.
3. Copy the downloaded ROM file to the root of your SD card and not within any folder. This helps you located the zip files easily while in recovery mode.
4. Disconnect your phone from the PC and turn it off.
5. Install Clock Work Mod
6. Boot into ClockworkMod Recovery.
7. Go to backup and restore>backup. This will create a nandroid backup which can be restored if you wish to revert back.
8. Go back and select “Install zip form SD card”>”Choose zip from SD card” and select the ROM zip file you had copied to the root of your SD card in Step 3.
9. Go back and select “wipe all data/factory reset”.
10. Go back and select “Reboot system now’.
----------------------------------------------------------------------------
Original Thread:
http://forum.xda-developers.com/showthread.php?t=1575094
----------------------------------------------------------------------------
Click to expand...
Click to collapse
thanks bosss
CWM backup ROM
Hi all,
I have rooted my Lenovo ThinkPad tablet and installed CWM by instructions in there http://forum.xda-developers.com/showthread.php?t=1831161 ...I wanted to flash to Cyanogenmod10, but before it I wanted to backup original ROM. And my problem is - there is no "Backup & restore" option in CWM's boot menu...where could be a mistake?
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2
kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.
sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.
kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2
Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956
Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT
violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery
Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!
Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Battery Draining issue!
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
ubaid88 said:
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Click to expand...
Click to collapse
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
azhar63 said:
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
Click to expand...
Click to collapse
I'm still using this fantastic rom and want its update. So if any body finds please inform me.
malick186 said:
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
Click to expand...
Click to collapse
I don't have any battery draing issue in this fixed ROM
Any method to flash jellybean via odin....
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Someone please confirm if this thing works
Its
bumjrah said:
Someone please confirm if this thing works
Click to expand...
Click to collapse
Check out.
http : // ngashsk.blogspot.com/p/alcatel (dot) html
Av tried it but its not working well with 4010D as only one simcard being detected
Link Below?
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
Can anyone verify if the files dowload links are removed, or it´s just me that I don´t find them?
1
:22
working for sure
just visit mutaanto(dot)wordpress(dot)com....u will find the zerostorm rom for alcatel 4010x..working perfectly
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
robneymcplum said:
http://www.mediafire.com/download/djg7n8ukahdac45/Custom_Gingerx_katv2_by_DrunkenLizard.rar
Rom for the 4010X not D, X!!
Normal flashing instructions, full wipes, install, flash enclosed CWM backup, flash a few zips..etc... included in the readme file. Not my rom, found it here: http://www.youtube.com/watch?v=Kere5VobLC0 and not my phone, so risked it. Works great and better than the xperia rom and stock anyway. Still need root uninstaller as bloat even on this one. After bloatware removal, there is maybe 130meg left ish, in system memory...
Click to expand...
Click to collapse
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
wex28 said:
I need some help.
Did you had clockworkmod installed on the phone? If so, how did you installed it? Since the recovery.img way didn't work for me...The phone restarted, but no cwm at all...
Or you installed it without cwm?
Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2320583
alcatel one touch 4010x
hi guy i am trying to flash recovery into my alcatel one touch 4010x using sp flash tool now i tells me that my phone does not have a bootloader..
the phone wont boot to recovery..
it says download bootloader..
does anyone have a fix for this?
help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
worked for me.
loxdon said:
Custom Rom for Alcatel T’POP
Custom Rom for Alcatel Onetouch (OT) T’pop
Custom Rom for Alcatel T’pop have been very elusive. Searching it online can be very frustrating but you don’t have to worry any more. This rom is Cynogenmod (Xperia Z) rom modded to work with Alcatel Onetouch (OT) T’Pop (4010A, 4010X, 4010D, 4010E) also known in some regions as Alcatel Glory 2S. This Custom Rom has been modded to use m2sd which increases alcatel t’pop internal memory by using the sd card to store Apps.
I wrote this article to guide you through the installation methods, but first you have to have your phone rooted and CWM recovery installed.
How to Root Alcatel (OT) T’pop
To root your Alcatel T’pop you must have a pc running Windows. Since Window does not have Alcatel drivers, download them from here.. After download execute the file and reboot your pc if necessary.
The next step is to install Ishuaji root. download from this link
The next step is to turn ON the USB debugging option on your device opening Menu > Settings > Applications > Development > USB debugging.
Open Ishuaji.
Plug in your device to your PC using the USB cable.
5. Now hit that little green button which appears in the bottom-right corner of the app.
6. It should start rooting your device.
7. You should now be rooted! Excellent! Your device’s been successfully rooted and you’re all set to enjoy the customization of your android.
Installing CWM
Download Cwm from here (link below)
Extract the archive which contains two files (mobile uncle tools.apk and recovery.img) . Install mobile uncle and make sure to move recovery.img to the root of your sd card.
open the mobile uncle application and grant it superuser permissions. Just press the left option (that is the “allow button”.
Click continue then choose “flash recovery from sd card”. Choose recovery.img. Well-done you now have cwm 5 installed on your phone.
Removing Chinese Super User
Download Super User (google for it/playstore/or use the forum)
Switch off your phone.
Press the volume up button and the power on button until the phone enters recovery mode.
Select “Install Zip From Sd Card” option and go to the downloaded super user.zip. Thats All.
INSTALLING XPERIA Z MOD FOR ALCATEL T’POP
Now that you have a rooted phone and CWM recovery installed lets play with custom roms. To install a custom rom is simple but sometime things can go wrong. First you have to save your current rom. Switch off your phone and Press the Volume Up and Power button to enter recover mode. Select Backup and Restore, then Backup and wait for CWM to backup your current ROM which can be used to restore your phone to an earlier state.
Download the Xperia Z custom rom for Alcatel T’pop from here(link below)
Extract the RAR archive which contains XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip and a Folder named RESTORE containing other files. Create a Folder with the name clockworkmod in root of your sd card if its not yet available. Open the folder and create another named backup.
Copy the Restore folder you extracted to clockworkmod>backup.
Copy XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip to the root of your sd card, do not extract the zip file.
Installation
Switch off your phone.
Press volume up and power buttons at the same time until you enter recovery mode.
Do the following first -Wipe data/factory reset -Wipe cache partition if any
Select the option INSTALL ZIP FROM SDCARD. Select XPERIA ROM MOD BY VIKTOR DOMINGUEZ.zip.
Install the zip
When complete select go back until you find the option BACKUP AND RESTORE.
Select Restore and select Restore/ .Wait until the operation is complete and reboot your system.
THATS ALL. ENJOY YOUR CUSTOM ANDROID. (STAY TUNED FOR OTHER CUSTOM ROMS)
HERE IS ANOTHER CUSTOM ROM I UPLOADED FOR ALCATEL T’POP(4010A, 4010X, 4010D, 4010E ). THIS MOD CAN BE USED AS STOCK ROM.
The installation is the same as shown above
download mutacion.zip from here(link below)
save the zip in root of sd card.
download Restaurar folder from here (link below)
copy/move it to /clockworkmod>backup
reboot your phone to recovery mode and wipe ALL cache , Wipe data/factory reset .
the next step is to install mutacion.zip. procedure is shown above.
still in recovery mode, go to backup and restore and restore your device with the files you downloaded shown as /Restaurar
reboot your device and enjoy.
Click to expand...
Click to collapse
thanks for the guide xda z the oñly place to be
kakalex said:
Av tried it but its not working well with 4010D as only one simcard being detected
Click to expand...
Click to collapse
So how did you solve the dual SIM issue?
Sent from my C2305 using XDA Free mobile app
DO NOT EVER TRY TO USE THIS FOR 4010D model. SECOND SIM UTILITY IS GONNA GET LOST!!
Can anyone please give me original rom backup for 4010D. My rom is crashed and I am not able to boot it. And PC also not detecting the device (May be problem with Drivers). I didn't took bakup, can you give ??
Hey guys, I'm trying to root this Alcatel 4010X and I'm following the instructions.
I installed the usb drivers to my laptop, installed ishuaji_root.exe an ran it..... Followed all the instructions and now my phone has restarted but has a lot of chinese writing - different apps etc, even though the phone language is still UK
I'm struggling with the next bit about installing CWM - I've installed it to my laptop via this https://www.xda-developers.com/how-to-install-clockworkmod/ link,but I'm unsure what I need to do now....
Does anyone know the newest version of android that will work on this handset?
itnorfolk said:
Does anyone know the newest version of android that will work on this handset?
Click to expand...
Click to collapse
There is no newer version. Only skinned versions of those newer ROMs.
How to Install iOS 7 Custom ROM on Samsung Galaxy Y :highfive:
Hello ! Today i'm gonna show you How to Install iOS 7 Custom ROM on Samsung Galaxy Y
To do This you need :
1- CWM Recovery
2- IOS7 custom ROM
Now , What we want to do ??
1- put the ZIP files on your SD card
2- reboot your device into recovery ( power button + Vol+ + Home button )
3- Choose zip from sd card > Install ZIP from sd card > and choose the CWM ZIP and install it >>( if you already have CWM on your device don't do this step ) <<
4- Go to mounts and storage
5 - Mount/data
6- Mount/cache
7- Mount/System
8- Go back
9- Select Advanced > Reboot Recovery ( the Device will reboot to recovery again )
10- Mounts And Storage > Format/System .......... Format/data .............. Format/cache
11-Mount/data ........ mount/system ........... mount/cache
12- Go back
13- install zip from sd card > choose zip from sd card > custom rom Zip file ios7..... And install it
14 - Wait
15- Go back
16 - Wipe data / factory reset
17-reboot system now
18- Wait some moments
***** Now you have IOS7 custom ROM :highfive: :highfive: :highfive: *********
HIT THANKS IF THAT'S WORKS
JAWAD TWAM { Developer & Programmer }
Can i install it on my Xolo q3000?? Will i be able to use Siri voice assistant after installing it?
Screenshots?
Can you post Screenshots?
iOS for mega i9152
How to install it on mega i9152
Please do post the procedure thanks!!!
Bluetooth headphones are not working
S6310
Is this Rom for Samsung Galaxy Young S6310 or older version of this phone ?
f*** my phone crashed don't use this crap
Jawad Twam said:
How to Install iOS 7 Custom ROM on Samsung Galaxy Y :highfive:
Hello ! Today i'm gonna show you How to Install iOS 7 Custom ROM on Samsung Galaxy Y
To do This you need :
1- CWM Recovery
2- IOS7 custom ROM
Now , What we want to do ??
1- put the ZIP files on your SD card
2- reboot your device into recovery ( power button + Vol+ + Home button )
3- Choose zip from sd card > Install ZIP from sd card > and choose the CWM ZIP and install it >>( if you already have CWM on your device don't do this step ) <<
4- Go to mounts and storage
5 - Mount/data
6- Mount/cache
7- Mount/System
8- Go back
9- Select Advanced > Reboot Recovery ( the Device will reboot to recovery again )
10- Mounts And Storage > Format/System .......... Format/data .............. Format/cache
11-Mount/data ........ mount/system ........... mount/cache
12- Go back
13- install zip from sd card > choose zip from sd card > custom rom Zip file ios7..... And install it
14 - Wait
15- Go back
16 - Wipe data / factory reset
17-reboot system now
18- Wait some moments
***** Now you have IOS7 custom ROM :highfive: :highfive: :highfive: *********
HIT THANKS IF THAT'S WORKS
JAWAD TWAM { Developer & Programmer }
Click to expand...
Click to collapse
i need source code
Can you post screen shots I can't install this
Thanks.
I tested but it stuck on logo,
I found out that if you are using Custom Rom, it will not work
You must first flash Stock Rom via Odin.
If it still does not work, you must flash kernelcm.tar via Odin.
Then just install step by step as above tutorials.
Thanks a lot
Is this ROM should work for my OnePlus 3 ? I would try it...
How to install it on my onida i407
Will it support j700F
16102 said:
Will it support j700F
Click to expand...
Click to collapse
might not work,
only for S5360
How to install ios7 rom Redmi 3s Prime plzzzzzz help sand me link iOS 7 rom link work Redmi 3s prime
can this be used for gt-s6102
in the recovory mode,there is no advanced options
Can this rom work for my samsung galaxy a3 2016 model pls i really need to know bc i love that particular rom
sir, how to install iOS 7 rom in my oneplus x
Thankyouuuuuuu ,Its working you must root your phone first , before doing this steps.