Related
This method successfully installs the CWM on the phone. CWM version supplied by ZOPO does not work. Use the CWM posted in the second link
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download Fully working English CWM from here http://www.4shared.com/file/16vuWyiU/recovery.html. The one posted in Zopo website does not work.
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Additional Info -
Install PDAnet from here http://www.junefabrics.com/android/download.php or Snappea from www.snappea.com to make your device get recognized when connected to the computer. Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
reserved
The CWM from taiwan101 for the 9300+ seems to be working fine. I was able to install .zip file from SD card. However the CWM is in Taiwanese, so if anyone can provide the CWM in English, thanks in advance
link for 9300+ CWM http://d01.megashares.com/dl/KicT315...M_Recovery.rar
UPDATE - Finally got a full working English CWM for ZOPO extracted from Mod ROM posted thanks to Kyrie1965. Tested and everything is working. Download from here http://www.4shared.com/file/16vuWyiU/recovery.html
vijayar said:
This method successfully installs the CWM on the phone. CWM as such works (able to navigate through the menus etc) but some of the function such as Install from ZIP, Backup etc, mount are not working, Gives an error Unable to Mount Sdcard !. Not sure if the issue is with CWM version supplied by ZOPO, need to try with other/older versions of CWM.
Please feel free to post links of CWM that works
I am a still learning and not a developer !
Hi All ZOPO ZP900 Leader Owners,
This is a guide for Installing Clock Work Mod Recovery Image on ZOPO ZP900 Leader Phone. Most of the owners of this fantastic phone would have desperately tried like me to install CWM on this phone (some may have found success). ZOPO does gives an option to order the phone pre-rooted however they do not install CWM ....or for that matter there is no Stock Recovery on the phone !!!. Start the phone with Power + Volume Up button pressed and your presented with an image of sick Android lying down with a Red triangle coming out of his opened stomach :laugh:
DONT TRY TO USE ROM MANAGER APP TO INSTALL CWM, THIS WILL ONLY BRICK YOUR PHONE !
So after breaking my head for couple of days, searching the net, downloading stuff I have successfully installed CWM !
So here are the steps !.
What you need
1. ZOPO ZP900 Leader phone
2. Download latest CWM from the link provided in Zopo Website http://www.4shared.com/file/lp0t5E1t/cmw-recovery.html
3. Download latest SP Flash Tool for MTK6577 from here http://www.4shared.com/zip/Xgc3G_hB/SP_Flash_Tool_v3122200.html
4. Download the latest Stock ICS ROM for ZP900 from Zopo website link http://www.4shared.com/rar/hGY2ahbu/MP_MT77_root_en_play_fix_zp900.html
5. Download MTK6577 Driver from Zopo website http://www.4shared.com/zip/YXlLFoLm/6577driver_install_3_steps.html
Installation Steps
1. Unzip and Install the USB drivers on your Windows PC using the MTK 6577 Driver Zip file. There will be 3 folders named First Step, Second Step & Third Step. Open First Step install the MTK driver MSI file. Post completion open Second Step, click on ClickInstall Driver, it will automatically install the USB driver. Press Exit after installation (Win 7 may give error that installation was incorrect, just ignore)
Repeat the same for folder Third Step
Connect your phone switched off and battery removed using USB cable. Windows will recognize and install the MTK drivers for your phone (any free COM ports) will be configured. Disconnect the phone. Put the battery back but do not switch on the phone
2.Extract the latest ROM folder from downloaded ICS ROM. You will get 2 folders
database
MP_MT77_h958_zp900_zwx_ics_20120912-155136_TSZ_PC
Open the second folder (MP_MT77***). This is the folder that has all the image files. You will find recovery.img file. This is original file. You can either rename it or keep a back up and delete it.
3. Copy the new CWM recovery.img file that you downloaded from ZOPO website in this folder. Rename it to be recovery.img
4. Extract and run SP flash Tool.exe (the one with Blue image icon)
5.Click on Options, USB Mode will be checked, DA Download All will be checked, in the sub options Speed will be Checked High Speed, Battery select With Battery. Come to the main Application window
6. Click on Scatter-loading button which is on the right side below Downloading Agent. A window will open. Browse to your extracted ICS ROM folder, click on folder MP_MT77****. By default you will have only one map file of name MT6577_Android_scatter_emmc. Select this
7. The flash tool will populate the Map file on the application window. You will see multiple Entries such as
PRELOADER
DSP_BL
MBR
etc etc. Each will have a check box which is by default checked.
8. UNCHECK all entries EXCEPT FOR "RECOVERY". Leave Recovery checked.
9. Now click on "Download" on the Application or press F9 on keyboard. A warning message will pop up. Press YES
10. You will see in the status bar below "Searching"
11. Connect your phone (switched off and with battery inserted) via the USB cable.
12. Flash tool will do its stuff. First a red progress bar, then a count down, a quick yellow progress bar and final window showing Green Circle.
If you get this the Congrats You have flashed CWM !
Check by unplugging the phone and re-starting it with Power+Volume Up button Pressed. The Phone will boot into CWM !.
Enjoy !
Warning - Please follow the instructions. Don't mess around with anything else. Not responsible if you do anything else and brick your device !
In case you get any other error on SP Flash Tool, then recheck your MTK driver installation. Try on another PC.
Now I hope this opens the door for many other things !
Click to expand...
Click to collapse
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
B rom error:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
help
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
miraguilar1 said:
hi there does anyone has flash the zopo900 leader and got the message B ROM ERROR: S_COM_PORT_OPEN_FAIL (1013)
It wont letme flash the phone driver seems working fine but it said "single usb port" and the port assing it. please help!
Click to expand...
Click to collapse
Check your device drivers USB driver has not been installed properly. I faced this issue and after multiple attempts of reinstall of USB drivers the flash tool started working properly
Also you can try installing PDAnet from here http://www.junefabrics.com/android/download.php
Install this with your phone switched on, this software installs the necessary drivers for the phone, post which you can use flash tool.
Note Connect the phone to flash tool first without battery, in options select with battery, press download after selecting the required file, when it says searching unplug the phone put battery back, dont switch on, plus back the usb. The flash tool should load the required file.
senlakshman said:
Hi Vijay,
What if i dont follow the step 8 (uncheck everything except recovery). Does it cause any issue?
I am running win 7 x64 and when i run the flash tool it says searching only after i click the download
Click to expand...
Click to collapse
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
From where did you bought this mobile?
Does the imei start from 355,889,3535
Is it ips 1gb ram .
Sent from my GT-I9100 using xda premium
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
vijayar said:
It will flash the entire ROM again. My guide was specifically for flashing only the CWM and not the entire ROM. I wanted to keep the Stock rom intact as it came from ZOPO.
Word of caution, I am yet top try flashing the complete ROM so if you are trying ensure that your have taken a backup via CWM (if already flashed) of your existing full working ROM before attempting anything. Also flash only ZOPO Stock or customised ROMs,
Click to expand...
Click to collapse
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
plz also have a look at previous posts u will get your answer.
senlakshman said:
I have installed the drivers, while the phone is on using pdanet and i powered off and ran the flash tool first without battery (with battery option) and put the battery back in. but i got message stating please insert usb and Flashtool have this alert.
Not sure, where i am missing the steps
Click to expand...
Click to collapse
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Working
bhargav1991 said:
hey will this work on hero 9300+ ,512mb ram .
i have ordered one and will soon arrive.
will try to make some custom roms.
Click to expand...
Click to collapse
Confirmed working on 9300+
Follow the tutorial exactly as written.
---------- Post added at 10:38 PM ---------- Previous post was at 10:28 PM ----------
Israeleet said:
Hey guys, I want to try this on my hero 9300+.
Is it safe?
Click to expand...
Click to collapse
This is a copy of cwm with the specific support for the MTK6577 used by the 9300+
So yes it safe.
---------- Post added at 10:46 PM ---------- Previous post was at 10:38 PM ----------
bhargav1991 said:
hey i have hero 9300+ 512mb ram
i have no network issue plz help me!:crying:
Click to expand...
Click to collapse
Make sure you removed the battery long enough from your phone.
You may also have to reboot your pc a couple of times.
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
vattmann said:
i too was having this problem but i tried the MTK6575 DRIVER and it worked maybe give it a try
Click to expand...
Click to collapse
Yessss , it did worked by using the MTK6575 driver :good:
bhargav1991 said:
Wtf .
I am talking about the no service issue,it doesn't have any relation
With battery or pc :what:
Anyways its an imei issue.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
YTF
This is the CWM forum.
Has anyone tried tw5 launcher on this ?
Sent from my GT-I9100 using xda premium
bhargav1991 said:
Anyone having problem with drivers can follow this http://www.youtube.com/watch?v=Rfemoi6Aizw
complete flashing process
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Hello bhargav1991, i got some questions:
1. I've buy zp900 but it will arrive next week. In the video you posted there is a guide how to flash the official Zopo z900 latest stock ROM but in this way you get the latest rom + root but no ClockWorkMod Recovery installed ?¿¿
2. My intention as i done with my old..HTC Desire HD is flashing ClockWorkMod Recovery and install the latest Zp 900 stock ROM + ROOT. So following the 1st post and once all steps are done one by one, will I get the same rom that come installed ?¿ but non root ?¿
I need to download the latest ZOPO ROM .zip and then install it from ClockWorkMod and finally i will get the latest ROM + ROOT ¿?
Could you please help me
Thank you so much in advance guys ¡¡
:good:
Originally Posted by suunnittelija View Post
I was able to root my ZTE V985 couple days ago. Download root installation package from:
http://pan.baidu.com/share/link?shar...&uk=2753639880
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
http://bbs.gfan.com/android-5226211-1-1.html
And Google translation:
http://translate.google.com/translat...26211-1-1.html
THE DEVICE IS NOW SUCESSFULLY ROOTED PLEASE POST ROMS/CUSTOMISATIONS/CWM/MODS + GUIDES ALSO AND ANY OTHER INFO ON THIS PHONE! THANKS.
alz_uk said:
Originally Posted by suunnittelija View Post
Click to expand...
Click to collapse
After rooting, you can download Google Play installer from here:
http://pan.baidu.com/share/link?shareid=126684&uk=1176017033
After installing, run this app. Slide blue button from Google Play logo to the phone logo. See attached picture.
suunnittelija said:
After rooting, you can download Google Play installer from here:
http://pan.baidu.com/share/link?shareid=126684&uk=1176017033
After installing, run this app. Slide blue button from Google Play logo to the phone logo. See attached picture.
Click to expand...
Click to collapse
Man your awesome, I was just about to get to that problem and what do you know took the words right outta my mouth.
HELP!!! Need ENGLISH recovery mode for chinese ZTE V985
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
BUMP!
Bump!
alz_uk said:
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
Click to expand...
Click to collapse
I found custom recovery from here:
http://pan.baidu.com/share/link?shareid=271693&uk=973327405
I think it is in Chinese, I have not installed it yet.
Does anyone knows that is it possible to build new recovery by using http://builder.clockworkmod.com/ and does it change the language to English?
I tried that tool by using Chinese recovery.img. It created new recovery.img successfully without any errors, but I have not tried it yet. Is it safe to use? I used builder just with recovery.img but without recovery.fstab because I wasn't able to find it.
What if the device fails to boot? I do have original firmware on .zip file, but not sure is it possible to boot and install original firmware from SD card.
ZTE stock recovery is actually in english !!!!
alz_uk said:
Hi all, someone please post information on replacing the ZTE V985 chinese stock recovery mode to ENGLISH recovery mode!!!!!!
Click to expand...
Click to collapse
My bad didnt check beforehand, it seems the stock recovery mode on the zte v985 is actually in english which allows to flash roms from zip files placed on the root directory of the micro sd card.
To enter ZTE Recovery Mode do as follows: Firstly power off device then Hold down volume down key and then hold down power key, when the zte logo appears on screen let go of the power key but still keep the volume down key held you will enter zte recovery mode which will allow you to wipe data, update from micro sd card etc.
Hope this helps.
alz_uk said:
Originally Posted by suunnittelija View Post
I was able to root my ZTE V985 couple days ago. Download root installation package from: DEAD
1. Install ZTE USB driver first: Goto Settings -Developer options - enable Driver CDROM. Connect your phone to the computer and install driver package from ZTE. 985root.7z package has also ZTE USB driver but it didn't work on my Win 7, so I installed drivers from phone.
2. Turn off CDROM mode and enable USB debugging mode and Unknown sources
3. Unzip 985root.7z file to any folder
4. Run xxxroot.bat and command window appears. Script will stop and ask you to press any key (in Chinese)
5. Check that your phone is connected and press any key. Script will upload files to your phone
6. There will be popup window on your phone. Click Restore my data
7. Phone will then boot up but keep it connected to PC and wait until it is fully booted
8. if there's nothing going on in command window, press any key and command window closes. If your are rooted, you have SuperUser app
Original instructions from here:
DEAD
And Google translation:
DEAD
THE DEVICE IS NOW SUCESSFULLY ROOTED PLEASE POST ROMS/CUSTOMISATIONS/CWM/MODS + GUIDES ALSO AND ANY OTHER INFO ON THIS PHONE! THANKS.
Click to expand...
Click to collapse
Hi, all links are dead for rooting ZTE grand Era. Does someone have valid links please ?
Thank you.
O_Neill31 said:
Hi, all links are dead for rooting ZTE grand Era. Does someone have valid links please ?
Thank you.
Click to expand...
Click to collapse
hello, anyone knows if exists any ROM for the v985 in 4.1 or miui v5?
david_gn7 said:
hello, anyone knows if exists any ROM for the v985 in 4.1 or miui v5?
Click to expand...
Click to collapse
4.1.2 update was released today. Here's the direct link for download:
http://pan.baidu.com/share/link?shareid=3082485858&uk=3442944625
It's recommended to update first from B03 to B04 and then do the 4.1.2 update. Here's the link for 4.0.4 B04:
http://pan.baidu.com/share/link?shareid=3921007642&uk=3945654451
How to do 4.1 update. Remember to backup first!:
1. Download V985_update_4.1.2.7z upgrade package file and unzip the file. Under the folders there's update.zip.
2. Copy update.zip to the external SD card root directory
3. Enter the "Settings" -> "System Software Updates" -> "Storage card upgrade." and uncheck "retain user data upgrade". If this is checked, it will cause some issues and the phone might not boot.
4.Click the OK button to upgrade. Upgrade process starts automatically after a few seconds.
Root & recovery:
http://pan.baidu.com/share/link?shareid=4088477952&uk=1178049129
How to root ZTE V985 4.1.2 Jelly Bean
Hi, it seems that ZTE has brought a new android version to the V985 called 222200B1329ZTE V985V1.0.0B04.
I have a V985 with android 4.0.4 version B03 installed, rooted and equipped with Gapps. I can only upgrade into stock which removes my root and Gapps.
Can anyone tell me how to root the V985V1.0.0B04 android 4.1.2 version?
Thanks
I was able to compile and run fully working clockworkmode recovery from CM10.1 stream,
I was also able to compile and port CM10.1 to this device. Currently thinking if we could port CM10.2 to this device.
CM 10.1
moskvicheff said:
I was able to compile and run fully working clockworkmode recovery from CM10.1 stream,
I was also able to compile and port CM10.1 to this device. Currently thinking if we could port CM10.2 to this device.
Click to expand...
Click to collapse
I will look forward for your posts, I'm very interested about CM 10.1 on my V985, great job! :good:
edusturke said:
I will look forward for your posts, I'm very interested about CM 10.1 on my V985, great job! :good:
Click to expand...
Click to collapse
Thanks!
I'm currently stuck with Wifi, I also have kernel sources for this device. Let me know If you'd like me to post the link on it.
I'm looking for any assistance in porting Cyanogen mod to this device to make it fully operational.
P.S. I neet at least 10 posts to be able to post links
Regards,
Sergey
Phone won't start!
I have installed 4.1.2 update on my v985, but it was draining my battery very fast, i tried to install back to B04, but it was not working, i couldn't install. Then i tried to install Clockwork Recovery and now phone won't start, iz just turns on ZTE logo and stops!
Help please!! Is there anyway to unbrick my phone?
Phone is something like read only
I have a v985. I received it rooted, but a lot of message was in Chinese an it did not download my contacts from gmail.
I've flashed all ROMs that I found, finaly I'm stuck in "enterprise_V985_signed_101613_1017.zip".
Google play does not start. It just flashes up.
I have a Chinese application search app, where I can install apps. It seems to be installed, but the app is nowhere.
I can boot into recovery, but I can't wipe or format at all. Nothing.
I can run "install zip", it loads the zip, the commands are started, it writes that it is OK, but does not change the phone at all.
The strand that I can make photo, it is saved, I can copy files to phone and to sd card...
What can be the problem?
hello there! It seems to be quiet here, did someone solve the problem? I have also this zte version, all things is working correctly except the battery, the current rom is ics 4.0.4 v985v1.0.0B03, the android system consumes itself about 50% of battery everyday even when the phone is in standby, I would like replace the kernel with a new one, if someone has some ideas I'm very interested. :good:
Hi,
I own a Bsnl Penta Tpad IS701c Tablet which has the following specification:
1. 1 Ghz Cortex A8 Processor
2. 512 MB RAM
3. 4GB Rom
4. Expandable to 32GB via Micro SD Card
5. HDMI Port
6. One Mini USB and One Full USB 2.0 with Mic Facility
7. VGA Camera
I was trying to root this tablet since it was performing very poorly but wasn't able to do so, so I tried to downgrade it from ICS 4.0.3 to Gingerbread. Flash was successfull but now the tablet is stuck on the Andriod Welcome Screen and I am unable to use the touch screen. Also when I am trying to shutdown it doesnt allow me to do so and Hard Reset is also not working.
Need your assistance in resolving this problem.
Resolved: How to format install and root BSNL Penta Tpad IS701c
Hi Guys,
I previously was looking out for an answer regarding how to upgrade firmware and unlock root access for BSNL Penta Tpad IS701C tablet. After 3 sleepless nights I have been successfully able to do the same and here is how you can restore your broken tablet (if its the case).
Prerequisites:
1. BSNL Penta Tpad IS701c Tablet (at least 50% charged or put on charging and continue)
2. OTG cable
3. Windows XP Operating System (I used the same since I was unable to load the ADB drivers using Win7)
4. Downloaded driver pack from pantel website for your device (For my device, New IS701C 20121201)
Procedure:
1. First of all, Download the Driver Zip pack and unzip it anywhere on your desktop or laptop
2. Next open the unzipped driver pack and run MPTool.exe file.
3. Next step is the connect your OTG cable to your tablet and then your PC/Laptop (Make sure that your tablet is in OFF Condition)
4. Now, insert a pin in the reset hole of tablet and press the Power Button for 5 secs (your tablet will start in Debug Mode and you will find Andriod device pop up on your PC/Laptop by the drive name as Vrdu or something).
5. As soon as the device is connected respective Port name in above picture is highlighted in Green with status as 'Ready' ( Buckle up as your are all set to flash your device)
6. Next up, click on 'Erase' to flash your ROM (this is advised to avoid any boot failures due to some junk data in Rom if you choose to just Download the ROM without Erasing it first, as good as Format your Hard disk and then clean install your OS simple!!)
7. Once done, you will get a pop up message 'Download End' and in background you will see 'Erase Success'.
8. Click on 'Download End' button and then click on 'Download NAND' button. ( Download will start, please be patient while this happening since it will take some time to complete. DO NOT TOUCH YOUR TABLET TILL THEN.
9. Once the download process is completed, you will again see 'Download End' pop up and in background you can see 'Download Success'
10. Next up, to patch your device ID, enter your device number as received with warranty card and click on 'Save and Return' button.
11. Now click on Write Chip ID ( you will get success message as before)
Viola!!!! you have just completed flashing your ROM and installed Andriod ICS 4.0.3 with some prepackaged softs.
Test:
1. Unmount your Andriod Device from PC/Laptop
2. Remove OTG Cable
3. Press the Reset button once ( Device will be shutdown)
4. Press Power button for 5 secs and.........
CONGRATULATIONS....your device is up and running brand new Andriod ICS OS.
Note: The device is powered by VIMICRO VA7882F chipset just an FYI.
Happy Andrioding!!!!
Touch sreen problem after flashing
madmax87 said:
Hi Guys,
I previously was looking out for an answer regarding how to upgrade firmware and unlock root access for BSNL Penta Tpad IS701C tablet. After 3 sleepless nights I have been successfully able to do the same and here is how you can restore your broken tablet (if its the case).
Prerequisites:
1. BSNL Penta Tpad IS701c Tablet (at least 50% charged or put on charging and continue)
2. OTG cable
3. Windows XP Operating System (I used the same since I was unable to load the ADB drivers using Win7)
4. Downloaded driver pack from pantel website for your device (For my device, New IS701C 20121201)
Procedure:
1. First of all, Download the Driver Zip pack and unzip it anywhere on your desktop or laptop
2. Next open the unzipped driver pack and run MPTool.exe file.
3. Next step is the connect your OTG cable to your tablet and then your PC/Laptop (Make sure that your tablet is in OFF Condition)
4. Now, insert a pin in the reset hole of tablet and press the Power Button for 5 secs (your tablet will start in Debug Mode and you will find Andriod device pop up on your PC/Laptop by the drive name as Vrdu or something).
5. As soon as the device is connected respective Port name in above picture is highlighted in Green with status as 'Ready' ( Buckle up as your are all set to flash your device)
6. Next up, click on 'Erase' to flash your ROM (this is advised to avoid any boot failures due to some junk data in Rom if you choose to just Download the ROM without Erasing it first, as good as Format your Hard disk and then clean install your OS simple!!)
7. Once done, you will get a pop up message 'Download End' and in background you will see 'Erase Success'.
8. Click on 'Download End' button and then click on 'Download NAND' button. ( Download will start, please be patient while this happening since it will take some time to complete. DO NOT TOUCH YOUR TABLET TILL THEN.
9. Once the download process is completed, you will again see 'Download End' pop up and in background you can see 'Download Success'
10. Next up, to patch your device ID, enter your device number as received with warranty card and click on 'Save and Return' button.
11. Now click on Write Chip ID ( you will get success message as before)
Viola!!!! you have just completed flashing your ROM and installed Andriod ICS 4.0.3 with some prepackaged softs.
Test:
1. Unmount your Andriod Device from PC/Laptop
2. Remove OTG Cable
3. Press the Reset button once ( Device will be shutdown)
4. Press Power button for 5 secs and.........
CONGRATULATIONS....your device is up and running brand new Andriod ICS OS.
Note: The device is powered by VIMICRO VA7882F chipset just an FYI.
Happy Andrioding!!!!
Click to expand...
Click to collapse
-------------------------------------------------------------------------------------------------------------
Hay.. after flashing using above method my tablet 's touch screen stopped working. and I am unable to go previous os .... What to do?
In recovery mode tablet shows "update touch screen firmware" How to update It ? Now
my tablet is dead because of no touch screen response. Also tell me how to install old firmware of IS701c using pc or any method for my dead tablet.... Help me, please....... Thanks in advance waiting for your reply
Re: To Dnyanesh
Dnyanesh60 said:
-------------------------------------------------------------------------------------------------------------
Hay.. after flashing using above method my tablet 's touch screen stopped working. and I am unable to go previous os .... What to do?
In recovery mode tablet shows "update touch screen firmware" How to update It ? Now
my tablet is dead because of no touch screen response. Also tell me how to install old firmware of IS701c using pc or any method for my dead tablet.... Help me, please....... Thanks in advance waiting for your reply
Click to expand...
Click to collapse
Hi,
The above method is for Penta Tpad IS701c. If you are trying to install this firmware of IS701r it will not work since there is a difference in the touchscreen hardware. Please download firmware from Pantel website for IS701r and try it once.
Always happy to help!!
Regards,
Sumit Raut
to Sumit
madmax87 said:
Hi,
The above method is for Penta Tpad IS701c. If you are trying to install this firmware of IS701r it will not work since there is a difference in the touchscreen hardware. Please download firmware from Pantel website for IS701r and try it once.
Always happy to help!!
Regards,
Sumit Raut
Click to expand...
Click to collapse
No, I have IS701c tablet with 512 MB ram and 4 GB internal and ICS 4.0.3. I formatted tab using new firmware of IS701C of 1GB Ram and 8GB Internal memory and ICS4.0.3, so my tab is now dead because of no touch response. How can i reformat it using old IS701C firmware. i want to use PC instead of formatting using "tablet and memory card method" . Because now my tab does not accept + and power up button command to format from memory card ( MMC ) since i have formatted using new firmware boot loader and u-boot.bin files are changed. how to format using pc and old is701c firmware? am waiting...................
Dnyanesh60 said:
No, I have IS701c tablet with 512 MB ram and 4 GB internal and ICS 4.0.3. I formatted tab using new firmware of IS701C of 1GB Ram and 8GB Internal memory and ICS4.0.3, so my tab is now dead because of no touch response. How can i reformat it using old IS701C firmware. i want to use PC instead of formatting using "tablet and memory card method" . Because now my tab does not accept + and power up button command to format from memory card ( MMC ) since i have formatted using new firmware boot loader and u-boot.bin files are changed. how to format using pc and old is701c firmware? am waiting...................
Click to expand...
Click to collapse
Hi,
What OS are you using on your desktop or laptop? I used Windows XP to update flash my firmware coz its comparitively easy. if Win 7, there are problems as Penta tablet is not recognized by default so you need to specify Generic Andriod ADB drivers. Once the Andriod device is recognized Vdfu named drive is opened. and then you can run the VIMICRO tool in the firmware setup you downloaded. Then first erase the rom and install the new ROM. Its fairly easy process if you still have any issues let me know. Old firmware was without HDMI support while new is with HDMI support I flashed with new IS701c firmware.
Regards,
Sumit R
my tab's touch also not working after update.but it starts and run with usb mouse.can anyone help to revert back to old firmware.old firmware can be flash from sdcard but after update it not working when i press vol+ and powerbutton there is otion of apply update from sdcard but when i select it start installation but then messege appeare that E:signature verification failed.and worst thing where i live there is no service center of penta.
it cant enter to debug mode ....after pressing reset and power button for 5 seconds the tablet is powering on ...
my tab prob :hand on penta
Hi All,
Sorry for hacking this post. I bought one BSNL Penta 701c Model, and when I open camera it says "Internal card is empty"" . When I insert the SD card it is not mounted. And the tablet details are
Model Number : 701c
Android Ver: 4.0.3
kernal Ver : 3.0.8
Build Number : PENTA IS701C 20121012
I was trying to flash my device. But even after enabled USB debugging the device is running in to debug mode.
I tried this unlock tool mentioned in thread(http://forum.xda-developers.com/showthread.php?t=1969766) and it says device not found.
Any help ?
Thanks
madmax87 said:
Hi Guys,
I previously was looking out for an answer regarding how to upgrade firmware and unlock root access for BSNL Penta Tpad IS701C tablet. After 3 sleepless nights I have been successfully able to do the same and here is how you can restore your broken tablet (if its the case).
Prerequisites:
1. BSNL Penta Tpad IS701c Tablet (at least 50% charged or put on charging and continue)
2. OTG cable
3. Windows XP Operating System (I used the same since I was unable to load the ADB drivers using Win7)
4. Downloaded driver pack from pantel website for your device (For my device, New IS701C 20121201)
Procedure:
1. First of all, Download the Driver Zip pack and unzip it anywhere on your desktop or laptop
2. Next open the unzipped driver pack and run MPTool.exe file.
3. Next step is the connect your OTG cable to your tablet and then your PC/Laptop (Make sure that your tablet is in OFF Condition)
4. Now, insert a pin in the reset hole of tablet and press the Power Button for 5 secs (your tablet will start in Debug Mode and you will find Andriod device pop up on your PC/Laptop by the drive name as Vrdu or something).
5. As soon as the device is connected respective Port name in above picture is highlighted in Green with status as 'Ready' ( Buckle up as your are all set to flash your device)
6. Next up, click on 'Erase' to flash your ROM (this is advised to avoid any boot failures due to some junk data in Rom if you choose to just Download the ROM without Erasing it first, as good as Format your Hard disk and then clean install your OS simple!!)
7. Once done, you will get a pop up message 'Download End' and in background you will see 'Erase Success'.
8. Click on 'Download End' button and then click on 'Download NAND' button. ( Download will start, please be patient while this happening since it will take some time to complete. DO NOT TOUCH YOUR TABLET TILL THEN.
9. Once the download process is completed, you will again see 'Download End' pop up and in background you can see 'Download Success'
10. Next up, to patch your device ID, enter your device number as received with warranty card and click on 'Save and Return' button.
11. Now click on Write Chip ID ( you will get success message as before)
Viola!!!! you have just completed flashing your ROM and installed Andriod ICS 4.0.3 with some prepackaged softs.
Test:
1. Unmount your Andriod Device from PC/Laptop
2. Remove OTG Cable
3. Press the Reset button once ( Device will be shutdown)
4. Press Power button for 5 secs and.........
CONGRATULATIONS....your device is up and running brand new Andriod ICS OS.
Note: The device is powered by VIMICRO VA7882F chipset just an FYI.
Happy Andrioding!!!!
Click to expand...
Click to collapse
Could you please give a screenshot of the update and the link from where yo downloaded the rom. I think its named angry birds space update on the pantel website. I upgraded it but then my touchscreen stopped working. Please help.
Two versions of Penta IS701C hardware exist
PallavP said:
Could you please give a screenshot of the update and the link from where yo downloaded the rom. I think its named angry birds space update on the pantel website. I upgraded it but then my touchscreen stopped working. Please help.
Click to expand...
Click to collapse
There are two versions of Penta IS701C hardware. Build nos 20120717 & 201209xx are considered old and there is a new version 201212xx.
This is amazingly lame on the part of Pantel Tech. They should have changed the model no to atleast IS710d or IS701E. Now when the
above 2 "old" versions hardware is flashed by "new" (angry birds space) rom/driver version, it causes trouble. TouchScreen problems
are the first headache as the tablet becomes unusable. (Try connecting a mouse on USB port. On my functioning tablet it works nicely).
Similar problems happen if "new" version hardware is flashed by "old" driver/rom version. I had recently emailed Penta tech support and they
cautioned me against updating my tablet with "new" angry birds space rom version.
One solution would be to download the "old" version of drivers from the Penta website and flash them.
Regards,
VK Singh
---------- Post added at 10:37 PM ---------- Previous post was at 10:09 PM ----------
madmax87 said:
Hi Guys,
I previously was looking out for an answer regarding how to upgrade firmware and unlock root access for BSNL Penta Tpad IS701C tablet. After 3 sleepless nights I have been successfully able to do the same and here is how you can restore your broken tablet (if its the case).
Prerequisites:
1. BSNL Penta Tpad IS701c Tablet (at least 50% charged or put on charging and continue)
2. OTG cable
3. Windows XP Operating System (I used the same since I was unable to load the ADB drivers using Win7)
4. Downloaded driver pack from pantel website for your device (For my device, New IS701C 20121201)
Procedure:
1. First of all, Download the Driver Zip pack and unzip it anywhere on your desktop or laptop
2. Next open the unzipped driver pack and run MPTool.exe file.
Happy Andrioding!!!!
Click to expand...
Click to collapse
Where do you find this MPTool.exe. If it comes along with driver download from Penta website, could you please zip it and
post it here in this forum. The driver package is huge and I don't want to download it just for one tool.
Actually I want to try to take the backup of the IS701C rom using MPTool. There are many versions of MPTool floating around
on the web for different kinds of devices like pendrives, phones, tablet etc. Right one should be used.
Taking a complete backup image of this tablet is proving to be challenge. It appears there is no recovery firmware compatible with it.
So softwares like ROM manager, ROM Toolbox, Titanium Backup, Online Nandroid all fail to make a complete image of the ROM.
While apps and there data can be backup by Helium backup, the system partitions remain out of reach. It is always good have a
complete backup in case something goes wrong in the future.
Best Regards,
VK Singh
useful information indeed @MadMax, it worked for me, thanks
After RESET use button POWER+VOLUME- (volume minus) to get into debug mode.
All the above steps are working. just after using RESET button use HOME BUTTON+VOLUME DECREASE BUTTON to get into DEBUG MODE.
otherwise the tablet do not go into debug mode.
try it. its working well for me.
thank you for the post by MADMAX87.:highfive::good:
helped me a lot
VK Singh said:
There are two versions of Penta IS701C hardware. Build nos 20120717 & 201209xx are considered old and there is a new version 201212xx.
This is amazingly lame on the part of Pantel Tech. They should have changed the model no to atleast IS710d or IS701E. Now when the
above 2 "old" versions hardware is flashed by "new" (angry birds space) rom/driver version, it causes trouble. TouchScreen problems
are the first headache as the tablet becomes unusable. (Try connecting a mouse on USB port. On my functioning tablet it works nicely).
Similar problems happen if "new" version hardware is flashed by "old" driver/rom version. I had recently emailed Penta tech support and they
cautioned me against updating my tablet with "new" angry birds space rom version.
One solution would be to download the "old" version of drivers from the Penta website and flash them.
Regards,
VK Singh
Click to expand...
Click to collapse
How to find which version of hardware i am using .. Some how my tab is dead now
---------- Post added at 10:04 PM ---------- Previous post was at 09:32 PM ----------
I Missed 10 th step .. unable to boot device any solution .. Unable to connect device...:crying:
BSNL PENTA IS701C flash issue
madmax87 said:
Hi Guys,
I previously was looking out for an answer regarding how to upgrade firmware and unlock root access for BSNL Penta Tpad IS701C tablet. After 3 sleepless nights I have been successfully able to do the same and here is how you can restore your broken tablet (if its the case).
Prerequisites:
1. BSNL Penta Tpad IS701c Tablet (at least 50% charged or put on charging and continue)
2. OTG cable
3. Windows XP Operating System (I used the same since I was unable to load the ADB drivers using Win7)
4. Downloaded driver pack from pantel website for your device (For my device, New IS701C 20121201)
Procedure:
1. First of all, Download the Driver Zip pack and unzip it anywhere on your desktop or laptop
2. Next open the unzipped driver pack and run MPTool.exe file.
3. Next step is the connect your OTG cable to your tablet and then your PC/Laptop (Make sure that your tablet is in OFF Condition)
4. Now, insert a pin in the reset hole of tablet and press the Power Button for 5 secs (your tablet will start in Debug Mode and you will find Andriod device pop up on your PC/Laptop by the drive name as Vrdu or something).
5. As soon as the device is connected respective Port name in above picture is highlighted in Green with status as 'Ready' ( Buckle up as your are all set to flash your device)
6. Next up, click on 'Erase' to flash your ROM (this is advised to avoid any boot failures due to some junk data in Rom if you choose to just Download the ROM without Erasing it first, as good as Format your Hard disk and then clean install your OS simple!!)
7. Once done, you will get a pop up message 'Download End' and in background you will see 'Erase Success'.
8. Click on 'Download End' button and then click on 'Download NAND' button. ( Download will start, please be patient while this happening since it will take some time to complete. DO NOT TOUCH YOUR TABLET TILL THEN.
9. Once the download process is completed, you will again see 'Download End' pop up and in background you can see 'Download Success'
10. Next up, to patch your device ID, enter your device number as received with warranty card and click on 'Save and Return' button.
11. Now click on Write Chip ID ( you will get success message as before)
Viola!!!! you have just completed flashing your ROM and installed Andriod ICS 4.0.3 with some prepackaged softs.
Test:
1. Unmount your Andriod Device from PC/Laptop
2. Remove OTG Cable
3. Press the Reset button once ( Device will be shutdown)
4. Press Power button for 5 secs and.........
CONGRATULATIONS....your device is up and running brand new Andriod ICS OS.
Note: The device is powered by VIMICRO VA7882F chipset just an FYI.
Happy Andrioding!!!!
Click to expand...
Click to collapse
Hi,
My BSNL PENTA IS701C was having issues in accessing the Internal & External SD card memory. Hence I have reflashed the tab with the firware from the Patel.in site (IS701C OLD 20120918) with the help of PC & external SD card. Now after flashing the firmware, the Touch Screen is not working (but the SD memory card is working fine). Mouse connection is working fine. I believe the firware version is wrong.
I tried reflashing the version NEW IS701C 20121201, but I couldn't so because the MP tool is not recognizng the device. I have inserted the pin in the reset hole and pressed the Rest and Power button simulatenously for 5 sec. The tab boots normally and the in MP tool the not device is selected and Erase/Download NAND buttons are not enabled. But I am able to access the SD cards from the PC. USB Debug is enabled. Kindly help me in fixing the issue.
Thanks in advance.
To Mr. Pallav.
29-Oct-13. Dear Mr.Pallav, Your info "Build nos 20120717 & 201209xx are considered old and there is a new version 201212xx." acted upon us as MOST VITAL info. So, we downloaded the new OS accordingly from Website - mytabletguru [dot] com. Immense thanks and gratitude.
Touch is not working.......
after flashing the rom the touch is not working, then i tried it again but the same problem arises again.......so plzzzz tell me what to do now???? m waiting for the reply.......!!!!!!!!!!!!!!!!
ya same problem with my penta is701c bro, now my tab doesn't repond to the tab keys for going in any mode i am also finding any method of flashing the firmware using pc........but if u finds first then plz tell me.........!!!!!!!
tab stuck at the boot screen
hey guys!!
I own a bsnl penta tab is701c and its stuck at the boot screen.
plz help me.:crying::crying:
Problem In Installing ICS
I want to know what is this MPTool.exe. I didn't find this in my extract drivers downloaded from Pantel website named "IS701C 2020120717".
Please help me!!!
Acer Liquid E1 All in One thread; Rooting, Recovery and Kernel, Roms and Unbricking
Disclaimer
We are Not responsible if you brick your device or lose your data. Rooting is done at own risk and we are not the ones to blame for messing up your phone. When you rooted this phone, you lost your warranty. Vache and Paugustin provided a way to restore your device to stock in case you mess up, and I've made a tutorial on that which you can find at the beginning of this thread.
If you have any question, feel free to reply, or leave a PM. I am always open for suggestions!
Of course, if you get stuck somewhere in the process, tell us! but don't forget to tell us exactly what you did, what the screen shows, and what files you used.
Here is a simple overview of the thread for you so you can quick acces all posts:
Rooting
http://forum.xda-developers.com/showpost.php?p=39293790&postcount=2
Click to expand...
Click to collapse
Reverting back to stock rom/ unbrick your device
http://forum.xda-developers.com/showpost.php?p=39293936&postcount=3
Click to expand...
Click to collapse
Custom rom section
http://forum.xda-developers.com/showthread.php?t=2226375
Click to expand...
Click to collapse
The user iulian1421 has been kind enough to provice me with a zipped Nandroid backup. This means that we now have acces to both dual-sim, and single-sim firmwares. If you want to give it a try, flash the CWM recovery, unzip this file and place it in SD card. apply the backup through CWM restore option.
mega.co.nz/#!V0YDXTKA!I2H1biA_NzBzFUbORHv020gzpQpcZzl5XcroeTQ Dpbg
Click to expand...
Click to collapse
People who contributed in this project, and helped me out big time :highfive:
Brick3d
Vache
Paugustin
iulian1421
Master Shifu Yuweng
Pratikmore
Socr4te @ Needrom
Rooting
Rooting
So, you want to root the phone? Alright let's get you started!
1. Download this file. This is a .zip I made which contains all the files you need to root the phone. It might be confusing at first, but you'll be doing this with your eyes closed after 2 times.
http://www.mediafire.com/download.php?fxqckmx2jx6b573
2. Extract the files into a folder you like (mine is Desktop/ROOT, so that i cant forget where it is)
3. Shut down your phone, pull out the battery. next, plug it into your pc with the battery still out. open device manager, and youll see
* unknown device
*mtk 57*** preloader with (!) triangle.
4. Manually install the drivers for that device which you can find in the folder you extracted. Be sure to install the drivers provided for your OS!!!
5. After installing, put the battery back in your phone and unplug it for now.
The actual rooting process
1. Open the folder > Flash tool > run Flash_Tool.exe
2. Click scatter-loading, and select the MT6577_emmc_aa66_Acer_AV051_V360_1.003.00_WW_GEN1.txt file. (you can find that in the scatter folder)
3. From the list, check the mark at Recovery. (All other marks should be UNCHECKED)
4. Double click recovery, and select recoE1-superuser.img from the Images folder.
5. Click download, and confirm the popup with yes.
6. With the power of the phone still off, connect it to usb
7. Next you will see the progress bar turn red, then yellow, and if it's finished correctly you will see a green popup ring appear in the flash tool.
8. remove the usb cable from the phone, and boot into recovery mode (volume + and power buttons)
9. Go to the recovery, and you will be presented an android triangle! dont worry, just press volume + once.
11. Now highlight the reboot system now, and you're all done
12. Give a thanks, and subscribe to this thread. If i get the permissions from them I will update this thread with the new creations of Vache, and Paugustin, as well as my own.
#Update 2#
Vache has released a CWM (v 6.0.2.8) onto his website. Flash this one like you would when flashing any boot img (see tutorial for that)
http://www.vache-android.com/Smartphones/Liquid%20E1/recovery/CWM-6.0.2.8_Acer-E1.img
Release TWRP recovery, the swipe to action is still not working, waiting for a fix!
http://www.vache-android.com/Smartphones/Liquid%20E1/recovery/TWRP-2.3.2.3_Acer-E1.img
Give this guy a big thanks for the awesome work he is doing!!!
Revert back to stock rom/ Unbrick device
Unbricking the phone or revert back to stock rom
This guide is written with the intention of being as noob friendly as possible. I know some things around here are a bit hard to understand, so I wrote it like this just so that everyone could understand.
First of all, you want to download and install the drivers from the acer site:
http://www.acer.nl/ac/nl/NL/content/drivers
* you might need to look up your phone model again here, which is V360 (you can type that into the model name bar and it will redirect you to the correct
page).
Once downloaded you want to download these 2 files:
Here is the ROM : https://truck.it/p/NSKm45nxjh
Here is ADB+ Fastboot: http://d-h.st/592
Once you've got both files downloaded (main rom is 600mb), unzip the rom first. You will get 2 folders:
* Database_Acer_AV051_V360_1.003.00_WW_GEN1
* Images
The Images folder is what we need most. You want to extract all contents from the ADB/fastboot zip file into the Images folder.
After you've done that (and assuming the drivers you installed are working correctly, a reboot of your pc might be required for that), shut down the phone.
Plug your phone into your pc with a USB cable (pretty obvious right?)
Hold the Volume + and Power buttons until it vibrates and shows you a nice little recovery menu. From here you need to pick the 'Fastboot'.
(Volume + is scrolling through menus, and volume down is selecting!!!)
After you've done that, you are shown the acer logo, with a small line of text underneath it which you can't completely read. Don't worry, its normal and if
the drivers are installed correctly it'll work anyways.
Now that you have set everything up you're ready to flash everything back to stock!
Once inside the folder containing the img files and adb/fastboot and their .dll files, you need to open a cmd in that window:
shift+ right mouse button > open command window here.
in the cmd screen now type this:
* fastboot flash boot boot.img - wait until it's finished. you will get an error or completed message in
the cmd screen.
* fastboot flash recovery recovery.img - should be done in a few seconds.
* fastboot flash system system.img - this will take long, because as you can see its over 600mb, don't give
up, first time it took me about 3 minutes to finish.
After flashing the system.img is done, wait for 10 seconds, then pull out the usb cable. Remove the battery from the phone, reinstert it, and boot it as usual. This should have flahsed your phone back to the stock JB Acer provided, including all apps and bugs that came with it.
great
i have rooted Acer Liquid E1, great, i waiting for next users happy we need big community for this big phone THX
Re: [GUIDE] Acer Liquid E1 All-In-One Guide
It's growing and I'm sure we'll see some nice stuff for this phone
Envoyé depuis mon V360 avec Tapatalk
atm I'm playing around with build.prop tweaks until Vache brings us init.d support and a flashable zip file for roms, I cannot make one. I also have succesfully installed Bravia Engine from sony, looks great!
Hi I did exactly as instructed and got all steps done right but I am not rooted.. Any idea why Thanks
Just tell us what happened. If you're not rooted it means something did not work and that is probably because you missed something. Check all the steps and try again. If you have an error message tell us what and when.
rizanx said:
Hi I did exactly as instructed and got all steps done right but I am not rooted.. Any idea why Thanks
Click to expand...
Click to collapse
Hmm, can you check up on the drivers? what does it show when you plug in the phone while the power is off?
I have no idea wether you're new to rooting etc or not, but have you checked these 2?
ADB Debugging on: settings > options for developers> turn on adb debugging
unknown source on: settings > security > turn on unknown sources
I believe those 2 settings are your problem
Brick3d said:
Hmm, can you check up on the drivers? what does it show when you plug in the phone while the power is off?
I have no idea wether you're new to rooting etc or not, but have you checked these 2?
ADB Debugging on: settings > options for developers> turn on adb debugging
unknown source on: settings > security > turn on unknown sources
I believe those 2 settings are your problem
Click to expand...
Click to collapse
Thanks for the reply man. I figured it out. I had to go to recovery and then reboot from there. One I did that I am rooted. Now hopefully some custom rom will appear.
hehe good to know! I was wondering if I had maybe forgotten something in the tutorial.. if you're a benchmark believer, im making a rom as of now, got the antutu scores up from +-2400 to -+2800.
Edit: I've gotten it up to 3k, quite proud of that!
I still can't make a real flashable rom because there is no fully functional CWM for this device yet.
I want to make a camera mod atm, but there is no media_profiles.xml present...anyone knows where its at or what the right file is?
Hi all
I have made cwm recovery 6.0.2.8 for this device on italian forum ----> Here
I think not bugs (i hope)
BackUp OK
Restore OK
Wipe OK
Mount USB Windows OK
Mount USB Linux OK
If you find bug i'm here for try to fix.
Bye all.
I tested erlucky CWM with Vache and it works well !
erlucky said:
Hi all
I have made cwm recovery 6.0.2.8 for this device on italian forum ----> Here
I think not bugs (i hope)
BackUp OK
Restore OK
Wipe OK
Mount USB Windows OK
Mount USB Linux OK
If you find bug i'm here for try to fix.
Bye all.
Click to expand...
Click to collapse
can you upload it on here in attachement please? I cant download it I think...
It's on Vache ftp : http://vache-android.com/Smartphones/Liquid E1/recovery/CWM-6.0.2.8_Acer-E1.img
To flash you just have to use the exact same method used for rooting. Just use this .img instead of the rooting recovery.img
Re: [GUIDE] Acer Liquid E1 All-In-One Guide
Ah yes ive downloaded that one alteady. I cant flash any images every time i get an error or it says completed but nothing is changed in system...
Sent from my V360 using xda app-developers app
It happened to me once, the flashing went ok but the recovery would not start at all. I flashed from another computer and it went OK.
Re: [GUIDE] Acer Liquid E1 All-In-One Guide
No its working properly, everything is fine except for that...
Sent from my V360 using xda app-developers app
Brick3d said:
No its working properly, everything is fine except for that...
Sent from my V360 using xda app-developers app
Click to expand...
Click to collapse
My Recovery is another cwm 6.0.2.8, i have porting from bruno martins basis for MTK 65xx emmc/mtd.....
I have added usb Mount file into ramdisk.
I'm Lucky76 in other forum (italian and Modaco)
Root Qmobile Noir A50:
Today we are going to root Qmobile Noir A50, The latest addition to Qmobile Smartphone Family....
The Following Method Contains Three Steps:
Areparation
B:Rooting
C:Verification
Preparation:
1:First we have to download the .rar file from the following link:
2:Find The Enclosed Attachment Down...(Extract Root Qmobile Noir A50_1 and Root Qmobile Noir A50_2 into same folder)
3:From the following link download the file and place it on desktop for ease of access....
4:Unpack that .zip
5:After That you will get a folder containing three Sub folders and a zip file:
Andriod Control
Drivers
Recovery
MTK6577_Universal_Root.zip(Dont' Extract It)
6:After the Following Files Been Extracted...
7:Copy The Recovery.img From The Recovery Folder Into The AndroidControl Folder....It's time for the next step....
Rooting:
1:First make sure u make up a backup of your contacts,messages,apps and data with mybackup pro:
2:Connect the Mobile To Computer
3:Make Sure to check Usb Debugging In Developer's Option located in your Settings of Mobile...
4:After That Backup put your backup files on your computer.....
5:Now from the Root Qmobile Noir A50 folder copy the MTK6577_Universal_Root.zip and paste it on your Mobile Sd_Card.....
6:After that install the necessary DRIVERS from Previously Extracted Root folder...
7:It will contain a drivers folder for that you have to install drivers manually.....it is divided into two ways....
For Windows Xp User's
For Windows Vista and Windows 7 User's
Haven't tried on Windows 8
For Windows Xp User's:
For Windows Xp....User's has to open Control Panel from Start....After that change Control Panel view to classic.....in Control Panel there will be Add Hardware...Click on it...After That a popup will open click next it will scan after it will give two option choose (Yes, i have already connected a hardware)...click next then go to down last it will say add new hardware click on it then select (Install a Hardware That I manually selected from the list....then click next then select show all devices the browse to Driver's and select android_winusb.inf. open it and install them one by one....
For Windows Vista and Windows 7 User's:
For Windows Vista And Windows 7 open RUN by (Start+R) then type (hdwwiz) it will open add a hardware then select show all devices the browse to Driver's and select android_winusb.inf. open it and install them one by one....
8:After That Disconnect your Mobile from your computer and Turn it Off....
9:Now Power On it With Holding The VOLUME UP AND VOLUME DOWN BUTTON with POWER BUTTON to Boot into recovery...
10:After it successfully booted it will two Options i.e. (Recovery mode) (Factory mode)..
11:Boot into Recovery mode by SELECTING from VOLUME UP and OK from VOLUME DOWN BUTTON...
12:After that it will show Three more Options select Fastboot Mode...
13:After that connect your Mobile to your computer....
14:Next Copy the Recovery.img from the Recovery Folder included in Root Qmobile Noir A50 folder and Copy it into Android Control folder....
15:After That Open Command Window in Android Control by Shift+Right Clicking on an empty space and select Open Command Window Here (Only For Windows Vista and Windows & User's)
16:For Windows Xp User's to open a Command Windows in a Folder they have to follow this way....
17:First Open Command Prompt by typing (Start+R) then type cmd....
18:After that type in this command into command prompt carefully....Change The Letter X with whatever drive you've installed you're Windows in.....
cd X:\Documents and Settings\Administrator\Desktop\AndroidControl
19:Then After Above steps type this Commamd....
fastboot flash recovery recovery.img
20:Then it will start flashing and show how much data is transferred.....
When it is stopped it means it is completed....
21:After That Disconnect your Phone from computer and turn off your Mobile..
NOTE: if it isn't Turning Off then Take out Battery and put it back but don't on it...
22:After That again Turn on your Mobile Into Recovery...
23:Select Recovery mode then again recovery it will open Cwm Recovery...
24:Now that you have placed the MTK6577_Universal_root.zip on your sd_card before it's now it's time....
25:Select Install zip From Sd card and select MTK6577_Universal_root.zip and install it...
After that is Done Your Mobile is now Rooted......
Restart Your Phone....
Verification:
For verification of rooted Mobile Download This app (Root Checker Pro)Link Below install it and run this app for checking....
:fingers-crossed::fingers-crossed:Don't Forget To Hit Thanks Button:fingers-crossed::fingers-crossed::
Stuck
Thanks for the post. Please not i am stuck on this step
After that type in this command into command prompt carefully....
cd C:\Documents and Settings\Administrator\Desktop\AndroidControl
Well my drive is D:\Deskktop\AndroidControl
I do the same as you mention above "fastboot flash recovery recovery.img"
But then flashing was not start and showing " <WAITING FOR DEVICE> "
My device is connected already. I don't know what i did wrong.
Please help me to figure out this problem
Have you installed you're windows in D: drive if so then type the following command:
cd D:/Documents and settings/Administrator/Desktop/AndroidControl
then follow the given steps from this line.....
If the above given command won't work then let me know so that i can then help you more clear about this step....waiting for the reply....
stuck
this is also not working
Help
soccermeme10 said:
this is also not working
Click to expand...
Click to collapse
First let me know which window's you're using...
Second Have you've installed you're Drivers correctly........
Third are you an Administrator of your computer or just a user specific by Administrator.....
Fourth if you are and administrator then send the full path of the directory in which your AndroidControl Folder is......
Fifth Have you've copied the Recovery.img Form the Recovery folder into the AndroidControl Folder.....
If it Still Dosen't Help you Then I will then upload a Tutorial on Youtube.....
Help
ZeDaYa said:
First let me know which window's you're using...
Second Have you've installed you're Drivers correctly........
Third are you an Administrator of your computer or just a user specific by Administrator.....
Fourth if you are and administrator then send the full path of the directory in which your AndroidControl Folder is......
Fifth Have you've copied the Recovery.img Form the Recovery folder into the AndroidControl Folder.....
If it Still Dosen't Help you Then I will then upload a Tutorial on Youtube.....
Click to expand...
Click to collapse
Let me know on which step are you stuck....
Thank You
Have been looking after this for a long time, thanks for the effort, now can you tell some roms available for this phone
Actually i don't own this phone right now so i can't tell you which rom is stable for this phoneset.... By the way thanks for your post
Sent from my WT19i using xda app-developers app
Thanks buddy I've successfully Rooted QMOBILE A50
On Windows 8 32 Bit
Sent from my Nokia 3310 using Tapatalk 4
Thanks
Thanks for the compliment i didn't thought it will work on Windows 8 32bit......I'm just happy to know that it worked....:laugh::laugh::laugh:
Can you suggest any good Rom for qmobile A50
Sent from my Nokia 3310 using Tapatalk 4
Srry
As a matter of fact i can't...........I didn't own this phone as i have looking towards something else....But if i find out any i will let you know
custom room
can we run cynogenmod 10.1 in a50 plz help
Reply
aliaman said:
can we run cynogenmod 10.1 in a50 plz help
Click to expand...
Click to collapse
I Think you can't because it's specific developed for models listed and if you used on a different set it will bug and i have tested cynagonmod the nightly version's are poor build and lack of unuseful apps their wifi or bluetooth scripts are poorly build or it drain battery like vampire so from my opinion stick to standard rom......
Chey mobile ki chey ROMs.... Seriously man....? QMobile's got MIUI running on their devices, downloaded from xda
How about suing them..?
ZeDaYa said:
I Think you can't because it's specific developed for models listed and if you used on a different set it will bug and i have tested cynagonmod the nightly version's are poor build and lack of unuseful apps their wifi or bluetooth scripts are poorly build or it drain battery like vampire so from my opinion stick to standard rom......
Click to expand...
Click to collapse
well i cant stick to a standard rom beacuse the system hangs to much samll games also hangs even after factory reset and every thing i still hang a lot no gaming can be done can u help me by suggesting a custom rom or can you help me my solving my problem
Reply
aliaman said:
well i cant stick to a standard rom beacuse the system hangs to much samll games also hangs even after factory reset and every thing i still hang a lot no gaming can be done can u help me by suggesting a custom rom or can you help me my solving my problem
Click to expand...
Click to collapse
Well as a matter of fact it is not a gaming mobile hence it will support 2d or low 3d games like temple run or fruit ninja etc.But it will not support heavy 3d games like temple run 2,asphalt or modern combat 3.Hence it does not house a good graphic processor and low on processor frequency..
So my advice stick to the low or mid end games or buy a Chinese gaming tablet if you are low on budget........
Qmobile A600 is a Good phone too...
plz upload stock rom for qmobile a50
Sorry
aliaman said:
plz upload stock rom for qmobile a50
Click to expand...
Click to collapse
I would have if i have it.... the reason i can't upload is i don't have this phone right now and i would get it back just to say 8,OCT so will you wait for then i would upload it as soon as i get it......
It's all i can besides is you're phone bricked or what let me know i will help you
stock rom
waiting for stock rom of qmobile a50