Database Info

[B]help!!!!!!!!!!!!!!! me please guy's help......[/B]

i have a huge problem can ne one help me........................
i had upgraded my rom to tx2.1 rom ........... but since this i have a problem of auto reset whenever i attach my usb connection it start's to reset .........
what can i do plz...... help me even i had tried on booter mode but it did not work........... as i started to install through usb it said that rom update utility error.....but i have tried all the rom's official and unofficial but still the same.........can i install the rom without using computer directly by the sd card is it possible.....plz ...help...............

ROM Update Problem

I stated to update ROM but unfortunately unplugged the cable with mistake.
Now my JAM is showing only black Screen with Text USB V1.02 . What i should do now, After rebooting many time, nothing happend, same screen.
Please help

You need to flash it again:
- fully charge your magician ( remove battery cover and plug in the charger )
- after you start your magician in bootloader ( You press power button + camera, and hit reset with stylus )
- download the rom u want ( magician wiki has loads of them and dont forget to disable USB Connections on Active Sync )
- and use matupgradenoid if you have country id error.

Rom Update Problem
Hi,
Thanks for Writing me.
I repeated all the step you sent me.
I rebooted the device and it shows USB Boot Sceen.
I downloaded ROM from clubimate.com and tried to install.
but its not working. its says unable to connect device.
Attached is the error screenshot. Please help

Hmm, can u fully upgrade your rom ?

Hi
I have the same problem.
When i try to load the rom, the device "boot" and stay in blank screen!
I tried what was sugested, bu t with no luck!
I ideias,
Thanks
Nuno Cancelo

I had a similar problem. I tried to flash the ext ROM with NZ Vodaphone and it didn't finish. The Phone would boot then hard reset. I tried to reflash with the ROM file from PC but it keep failing. Luckily I have a spare Jam. I dump the ROM of the old phone and reflashed it to the broken one. To dump the ROM of a good Imate Jam goto http://forum.xda-developers.com/showthread.php?t=230151
Once you have done this, Reboot your phone into the ROM flash menu with the SDCARD that you used from the good phone into yours.
I think from there it sees the ROM files and gives you options to reflash.
Good luck.

[Q] Viewsonic 10s rom issues

Hi guys i really need help with this issue
I have a viewsonic 10s that was working on a modded rom for over 4 months , i read up on the vegacomb rom and decided to install it, install went fine , rebooted and rom seamed to work , after switching it off and on the following morning i cant get teh rom to load and more worrying is i now cant get to the recover screen .
the unit is currently stuck ina loop , shows install screen again and then the vengacomb logo but no futher
i have a youtube video showing this but am unable to post it at this time as ii am new to the forum, you can simply search my youtube user gohanni to view please please please help..........

still on going
the issue has been still on going, an after many attemptd to put the original firm ware back on i have discovered that teh usb driver that did work originaly to attempt to put the honey comb image on now shows in device manager as having 2 unknowen devices that appear when i connect the tablet via usb .
cdc serial
shuttle
both of these have esclamation marks, tried to auto update driver to no avail.
guys and girls really need some help
please search user gohanni on youtube for a short video showing the issue

hey guys
still no further any one have an idea what i have done and how to reverse it
????????

[TUT] Unbrick Micromax FunbookPro P500

Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS

In spite of installing the adb drivers my device does not show please help

if i want to use this process to root my funbook P275, without back button, will it work?

Wifi not working..
after un brick my micromax P500..
wifi not working..
i thing wifi driver is missing.. plsssss help.....
---------- Post added at 02:18 PM ---------- Previous post was at 01:39 PM ----------
pls help bro....

plsss help....
hi bro.. i bricked my funbook pro.. and now i recover it but my wifi driver is missing.. now wifi is not working..
do u give me a idea where i got micromax P500 wifi driver..
Plss help.....

please help...!!!!
I too unbricked my funbook p500 ....
but after that my wifi is not working ..... i trid many rom but am not able to use wifi
pls help......

IMG of working P500 (without wifi problems)
cool.gautam said:
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
Click to expand...
Click to collapse
Excuse me for asking big thing, but can you make a IMG file from your (or anyone) working funbookPro.
The livesuit wiped something related to wifi while using Yarvik image file. Since then the wifi isn't working. I managed to turn it on using some other Stock firmwares but its not able to get the IP address. ( tried http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP, http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I and many other stock firmwares). Unless the source stock firmware is flashed seems the wifi is not going to work. Even the backup provided by you is unable to bring back the wifi. funbookpro is using some wifi chip which isn't present in most of the tablets. I've been struggling to get it back from few days. downloaded many Gigs still no luk
Thanks in advance.
---------- Post added at 02:04 PM ---------- Previous post was at 01:56 PM ----------
oh btw anyone who bricked their funbookpro can use the following firmwares with livesuit till we get an official firmware
Most of the firmwares wipe out the internal SD card. use only if u dont care about internal SD or if it is being shown as damaged.
The following are the images that worked for me..
http://www.kocaso.com/firmware/M1062_01.exe
http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
http://www.mediacomeurope.it/ZeusInc/PressRoom/Documents/1010i.zip
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
Some have problem while restoring the backup given by Gautam.

FunBook Pro similar firmware with other 3g dongles working (try this only on bricked)
M1062_01.exe This firmware is working great. I've tried couple of 3G dongles they are working fine. Screw photon + :laugh:
The downside is unable to use other updates like PowerTab_JB_V2_by_Joby. It just freezes at cyanogenmod logo. Oh yeah!!! it wipes out the Internal SD card as well. Still the firmware isn't a perfect match.

Touch screen not working
After unbricking, touch is not working, any ideas? Thanks

naneraja said:
After unbricking, touch is not working, any ideas? Thanks
Click to expand...
Click to collapse
Follow the step5 from the main post by cool.gautam

matrixbluestar said:
Follow the step5 from the main post by cool.gautam
Click to expand...
Click to collapse
Works now after reinstalling the backup. Thanks for the help

micromax p500
i have installed cwm recovery but nothing works in it no button works except power button and mouse is also not working and touch is also not working
please help.................

[Completed] Nexus 4 Dead

Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:

sarangd said:
Hello Friends,
Need your help in fixing my Nexus 4 Device
last time My Nexus 4 was running when i tried to install a custom Build rom (Nightly) from cynogenmod Using TWRP Recovery
now suddenly my nexus 4's USB port Stopped working but it was Charging ,
it doesnt work anymore Something went wrong and Now its NOT opening Recovery mode , Just blackScreen
It doest Detect my nexus 4 , I am able to open bootLoader Mode , but also it doesnt Detect fastboot Mode in my laptop.
it gives "Device Descrioptor request Failed error" i tried updating the drivers as well but doesnt work anymore
So i tried Changing the USB Port and replaced the part , but the problem remains the same ,
No Recovery , NO USB PORT.. Cant Fix my Nexus 4 Now
HELP ME GUYS ,
any suggestions would be appreciated .
Thanks
:crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.

Vatsal said:
Hello,
It seems more like a USB issue.
Please refer here https://forum.xda-developers.com/android/general/fix-unknown-usb-device-device-t3375320
Regards
Vatsal,
Forum Moderator.
Click to expand...
Click to collapse
hello Vatsal
It did tried this already , this didnt worked for me ..
:'(