This is for the Verizon Galaxy S5 Dev. Edition ONLY!!!
SM-G900V
Flash at your own risk!!!!
This mod will flash an insecure boot.img. Allowing you to ADB with root.
1. Download
2. Create back up or have Odin rescue files available.
3. Reboot Recovery
4. Flash sv_deved_insecureboot.zip
(Not signed so you will need to toggle signature verification)
Sent from my SM-G900V using Tapatalk
Does this also set selinux to permissive? Thanks!
jhanson said:
Does this also set selinux to permissive? Thanks!
Click to expand...
Click to collapse
No it does not. But I can create one that does.
Sent from my SM-G900V using Tapatalk
Versatile1 said:
No it does not. But I can create one that does.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Please! I really need permissive for the ability to override /dev/input for my appradio. I would greatly appreciate it! Thanks!
I can not add it in, all the usual methods do not work. Only way I know is to flash the kernel posted in Original Development. I'm not good working with kernels or I would try adding the modification.
Sent from my SM-G900V using Tapatalk
Versatile1 said:
I can not add it in, all the usual methods do not work. Only way I know is to flash the kernel posted in Original Development. I'm not good working with kernels or I would try adding the modification.
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
No problem, thanks for the effort anyway. I'm currently running "the arkenstone", which sets selinux to permissive, I was just hoping to have a more stock kernel. Thanks again!
CD Installer
Any chance of modding the boot.img to remove Verizon's CD Installer that pops up when you plug into USB?
Thanks great job on this!!!
EMSpilot said:
Any chance of modding the boot.img to remove Verizon's CD Installer that pops up when you plug into USB?
Thanks great job on this!!!
Click to expand...
Click to collapse
You can do this without kernel mod.
First navigate to /efs/carrier/HiddenMenu and change from OFF to ON save and exit.
Next you will want to navigate to /system/etc/autorun.iso and either rename *.bak or delete it.
Now reboot
Finally enter into your dialer *#0808#
Switch to MTP hit OK
Navigate to developer options and enable USB debugging if applicable.
All should be good.
Hmm... seems this doesn't stick through reboot. I will look into the kernel for you.
Versatile1 said:
You can do this without kernel mod.
First navigate to /system/efs/carrier/HiddenMenu and change from OFF to ON save and exit.
Next you will want to navigate to /system/etc/autorun.iso and either rename *.bak or delete it.
Now reboot
Finally enter into your dialer *#0808#
Switch to MTP hit OK
Enter once again into dialer *#0808# and switch back to MTP + ADB then Reboot
All should be good.
Click to expand...
Click to collapse
There is no /system/efs folder on a Verizon S5
EMSpilot said:
There is no /system/efs folder on a Verizon S5
Click to expand...
Click to collapse
Good catch!
/efs
Sent from my SM-G900V using Tapatalk
boot.img
Versatile1 said:
Good catch!
/efs
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
Look in the ramdisk file name "init.qcom.usb.sh
I believe line 116
EMSpilot said:
Look in the ramdisk file name "init.qcom.usb.sh
I believe line 116
Click to expand...
Click to collapse
I commented out that section and changed default.prop from mass_storage to mtp,adb still no luck. I will look at the source tomorrow. I really believe it's in a *jar
Sent from my SM-G900V using Tapatalk
We got this fixed if anyone is wondering. http://forum.xda-developers.com/showthread.php?t=2831291
Sent from my SM-G900V using Tapatalk
jhanson said:
Please! I really need permissive for the ability to override /dev/input for my appradio. I would greatly appreciate it! Thanks!
Click to expand...
Click to collapse
Wondering if you ever got permissive enabled to work with your app radio?
I have been working on this most of the week.
Have the S5 std edition not the dev ed. What phone are you using?
Thanks
jp712 said:
Wondering if you ever got permissive enabled to work with your app radio?
I have been working on this most of the week.
Have the S5 std edition not the dev ed. What phone are you using?
Thanks
Click to expand...
Click to collapse
Yes, I got it to permissive, but I've got the dev edition, so it's easy (and possible) to change the kernel. I know someone in the forums is working on permissive without kernel change, but last I read it's not completed yet. Best of luck!
jhanson said:
Yes, I got it to permissive, but I've got the dev edition, so it's easy (and possible) to change the kernel. I know someone in the forums is working on permissive without kernel change, but last I read it's not completed yet. Best of luck!
Click to expand...
Click to collapse
Gotcha, Thanks! Im figuring out the kernel stuff. Have been flashing custom roms for years never changed the kernels.
I was under the impression that you could just flash the .zip with safestrap on an std version?
I tried that , never saw the kernel actually change. I thought I was doing something wrong. Your reply leads me to think that changing the kernel on the stock S5 isn't exactly feasible yet?
Thanks!
Related
I saw that Canonical added new branch phablet-4.4_r1 https://wiki.kubuntu.org/Touch/AOSPBuild
so I compiled it for FLO
Download
system http://d-h.st/sXM
kernel http://d-h.st/mSc
but we must flash also ubuntu files but I don't know which files
http://cdimage.ubuntu.com/ubuntu-touch/daily-preinstalled/
any help would be appreciated
Also curious what other files are needed to work. Will wait to try
I think it is a step in the right direction but i think we would still need the hardware specific package (trusty-preinstalled-touch-armel+flo.zip) to make it work
nikr123 said:
I think it is a step in the right direction but i think we would still need the hardware specific package (trusty-preinstalled-touch-armel+flo.zip) to make it work
Click to expand...
Click to collapse
nope. I think that we must flash this trusty-preinstalled-touch-armhf.zip
DevSwift1 said:
nope. I think that we must flash this trusty-preinstalled-touch-armhf.zip
Click to expand...
Click to collapse
... if you check the official guide on Ubuntu's website ( https://wiki.ubuntu.com/Touch/Install#Manual_Download_.26_Installation ) they say you don't need that one... but I'm not sure.
Sent from my W8 beyond using Tapatalk
nikr123 said:
... if you check the official guide on Ubuntu's website ( https://wiki.ubuntu.com/Touch/Install#Manual_Download_.26_Installation ) they say you don't need that one... but I'm not sure.
Sent from my W8 beyond using Tapatalk
Click to expand...
Click to collapse
I compiled it already you can download it
DevSwift1 said:
I compiled it already you can download it
Click to expand...
Click to collapse
That is not what I'm talking bout... I'm saying that I think we would need "saucy-preinstalled-touch-armel+flo.zip" as the say on the website " Get the hardware specific zip and img files for your device from the Ubuntu cdimage server here, i.e. for a Nexus7 this is saucy-preinstalled-touch-armel+grouper.zip".
Sent from my W8 beyond using Tapatalk
nikr123 said:
That is not what I'm talking bout... I'm saying that I think we would need "saucy-preinstalled-touch-armel+grouper.zip" as the say on the website " Get the hardware specific zip and img files for your device from the Ubuntu cdimage server here, i.e. for a Nexus7 this is saucy-preinstalled-touch-armel+grouper.zip".
Sent from my W8 beyond using Tapatalk
Click to expand...
Click to collapse
you don't understand me too.
saucy-preinstalled-touch-armel+grouper.zip in this zip package we have system files for grouper
We don't have official support for flo so I compiled it (system.img) and you can download it from first post
Does anyone know if this is a daily driver or not.
mcteague said:
Does anyone know if this is a daily driver or not.
Click to expand...
Click to collapse
Read all the posts above yours and decide for yourself.
Sent from my Nexus 7 using Tapatalk 4
how can we flash this :3 i see only boot.img and system.img
bogii4 said:
how can we flash this :3 i see only boot.img and system.img
Click to expand...
Click to collapse
If I am not mistaken, it should just be:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Personally, I would wait for someone else to try it, first.
Perhaps its a bit harder to brick devices, nowadays, but I wouldn't want to risk it, myself.
techn0crat said:
If I am not mistaken, it should just be:
Code:
fastboot flash boot boot.img
fastboot flash system system.img
Personally, I would wait for someone else to try it, first.
Perhaps its a bit harder to brick devices, nowadays, but I wouldn't want to risk it, myself.
Click to expand...
Click to collapse
It should be buggy but my question is does it fully boot and have the main things working like - WiFi, BT, Camera, Sound etc..
Would this be flashable via TWRP MultiROM?
Sent from my Nexus 7 using XDA Premium 4 mobile app
its not a zip you cant flash it with recovery.
Can someone report what work and what not
*$M3RT$* said:
its not a zip you cant flash it with recovery.
Can someone report what work and what not
Click to expand...
Click to collapse
I couldn't get it to boot with multirom. Installed without issue then pushed system.IMG and boot.IMG. every time I tried to boot off it everything would just revert back to the internal rom
Sent from my Nexus 7 using Tapatalk 4
Please read the important sentence:
Currently you can try either the phablet-4.2.2_r1 or phablet-4.4_r1 branches. The latter builds and boots but only the adb shell works, there still are bugs preventing Android and Ubuntu communicating (WIP as of Nov 21 2013)
Click to expand...
Click to collapse
"Work in progress (WIP)" is a funny way to describe this achievement...
@DevSwift1 Any progress? Not asking for ETA, I just want to know if I can look forward to this!
Sent from my Nexus 7 using XDA Premium 4 mobile app
StrangerWeather said:
@DevSwift1 Any progress? Not asking for ETA, I just want to know if I can look forward to this!
Sent from my Nexus 7 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It seems that we must wait until ubuntu will fix problem with communicating between android and ubuntu
So has anyone installed this? does it boot atleast?
Hello
This kernel, is the kernel stock of XXUENA6, modified just to set SELinux permissive and allow adb to run as root.
Download:
http://www.mediafire.com/download/iy5bkg3kb9dm208/kernel_sapec.zip
Flash it, in custom recovery.
If necessary i can provide a .tar for Odin
Credits:
akshizzle
zamcum said:
Hello
This kernel, is the kernel stock of XXUENA6, modified just to set SELinux permissive and allow adb to run as root.
Download:
http://www.mediafire.com/download/iy5bkg3kb9dm208/kernel_sapec.zip
Flash it, in custom recovery.
If necessary i can provide a .tar for Odin
Credits:
akshizzle
Click to expand...
Click to collapse
First! very good. Can you also provide stock kitkat kernel?
EDIT: In setting, it does not show permissive status. Is it normal?
IzArsha said:
First! very good. Can you also provide stock kitkat kernel?
Click to expand...
Click to collapse
surely:
http://www.mediafire.com/download/g55k77456qs4qhd/kernell_stock.zip
EDIT:
I dont know where is the information present in "Settings" but its not in the kernel, maybe in build.prop...
You can try with your pc, and check if you get Adb connection
Can u modify the kernel so the n900t and the n900w8 and the n900a can use it
Sent from my SM-N900T using XDA Premium 4 mobile app
I can already get adb connection with root with stock kernel and rooted polish official kitkat rom. So....
Sent from my SM-N9005 using XDA Premium 4 mobile app
Wow!! The first kitkat kernel!! Does this mean the source from sammy is already out!!
Sent from my SM-N9005 using xda app-developers app
mateenf said:
Wow!! The first kitkat kernel!! Does this mean the source from sammy is already out!!
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
Nop. There are no sources yet
The changes, are only in ramdisk. Sources are not necessary for this.
antt00 said:
I can already get adb connection with root with stock kernel and rooted polish official kitkat rom. So....
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It's for Permissive status on SELinux. If you have nothing good to say how about you don't say anything at all? Or you read the actual OP before you make a stupid remark!
zamcum said:
Hello
This kernel, is the kernel stock of XXUENA6, modified just to set SELinux permissive and allow adb to run as root.
Download:
http://www.mediafire.com/download/iy5bkg3kb9dm208/kernel_sapec.zip
Flash it, in custom recovery.
If necessary i can provide a .tar for Odin
Credits:
akshizzle
Click to expand...
Click to collapse
Thank you for this, thanks button mashed!
Sent from my SM-N9005 using XDA Premium 4 mobile app
radicalisto said:
It's for Permissive status on SELinux. If you have nothing good to say how about you don't say anything at all? Or you read the actual OP before you make a stupid remark!
Sent from my SM-N9005 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Did you also read the part in the op "to allow adb connection with root" or you didn't read it either.
For me that is already available with the stock kernel and was just wondering what the op meant by it.
Sent from my SM-N9005 using XDA Premium 4 mobile app
no fastboot connection
tried this kernel in the hope that fastboot get access to the phone.
but it wont work, do you have any solutions for this?
al needed drivver are installed but i couldn´t access the phone by fastboot
Mguttsche said:
tried this kernel in the hope that fastboot get access to the phone.
but it wont work, do you have any solutions for this?
al needed drivver are installed but i couldn´t access the phone by fastboot
Click to expand...
Click to collapse
Hello
If i have some free time, tomorrow i try the fastboot in new version.
If you want, you can get it:
http://www.htcmania.com/showthread.php?t=765737
This one have some fix's and Faux Sound
zamcum said:
Hello
If i have some free time, tomorrow i try the fastboot in new version.
If you want, you can get it:
http://www.htcmania.com/showthread.php?t=765737
This one have some fix's and Faux Sound
Click to expand...
Click to collapse
Thanks in advance
Sent from my SM-N9005 using XDA Premium 4 mobile app
Any progress with the new version?
Sent from my SM-N9005 using XDA Premium 4 mobile app
Hi. Can anybody post the working link for this kernel for Note 3 SM-N9005 (hlte) 4.4 KitKat.
holfman.s said:
Hi. Can anybody post the working link for this kernel for Note 3 SM-N9005 (hlte) 4.4 KitKat.
Click to expand...
Click to collapse
Did you get the new link
joseph- said:
Did you get the new link
Click to expand...
Click to collapse
Hello,
Did anyone got it on 4.4.2?
For those that have done root. Verizon Galaxy S6- G920VVRU1AOC3/G920VVRU1AOE2 Only!!!
Differnet phones can have different frameworks. Do not attempt to flash this on a different phone unless you want to possible have to ODIN Back to stock.
This will only work if...
1. You have root on Verizon S6 - G920VVRU1AOC3/G920VVRU1AOE2
2. You have @Chainfire- Flashfire app installed so you can flash this zip file. Located here.....
I have included stock framework-res flashable if you want to go back..
Galaxy S6 Phone OnlyG920VVRU1AOC3:
Flashable HotSpot (Galaxy S6-G920VVRU1AOC3)
Flashable Revert to Stock Framework
Galaxy S6 Phone OnlyG920VVRU1AOE2:
Flashable HotSpot (Galaxy S6-G920VVRU1AOE2)
Flashable Revert to Stock Framework
Not responsibile for, you if you flash on something other than what I built this for. And if you do flash it on said device,then I am still not respondsible as this is all a risk always.. 100% time. Always a risk...
Good job! Thanks
Of all the mods I was hoping for, this is easily #1. You rock Gun! Now to read up on this flashfire stuff... guess I may as well get used to not having an unlocked BL anymore.
Gun was the chances that this works on the s6 edge Verizon
Sent from my SM-N915V using Xparent Green Tapatalk 2
2swizzle said:
Gun was the chances that this works on the s6 edge Verizon
Sent from my SM-N915V using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
Hard knowing sir..
If you get me your framework-res.apk I might try to do one up for you guys.
Would you be interested in helping us poor suckers at AT&T, I would like to enable native tethering as well? Thanks in advance.
[email protected] said:
Would you be interested in helping us poor suckers at AT&T, I would like to enable native tethering as well? Thanks in advance.
Click to expand...
Click to collapse
I dont know the edit for AT&T... sorry
Sent from my SM-T320 using Xparent BlueTapatalk 2
Thanks for this~ Seems to be working, I don't have another wifi device at work to test it.
Just a quick question, if I were to go back to stock would I have to flash to stock framework and then flash the hotspot file again or just flash the stock framework?
snk012 said:
Thanks for this~ Seems to be working, I don't have another wifi device at work to test it.
Just a quick question, if I were to go back to stock would I have to flash to stock framework and then flash the hotspot file again or just flash the stock framework?
Click to expand...
Click to collapse
Just the revert flashable sir.
Gunthermic said:
Just the revert flashable sir.
Click to expand...
Click to collapse
Thank you~~
VZW GS6 Edge Help?!
I have the VZW GS6 Edge, however my device is G925VVRU1AOC3. Any chance of getting support with this? Or possibly the instructions to remove the tether check. I have Flashfire so would it be possible to "backup" the partition you modified and change with your instructions? Thanks for any feedback.
-Scott
scott8357 said:
I have the VZW GS6 Edge, however my device is G925VVRU1AOC3. Any chance of getting support with this? Or possibly the instructions to remove the tether check. I have Flashfire so would it be possible to "backup" the partition you modified and change with your instructions? Thanks for any feedback.
-Scott
Click to expand...
Click to collapse
It's in the OP sir. there is one for the S6 and one for the S6 Edge...
To include the revert for each,.....
Gunthermic said:
It's in the OP sir. there is one for the S6 and one for the S6 Edge...
To include the revert for each,.....
Click to expand...
Click to collapse
This works for the Vzw edge! Thank you. Is there a hotspot widget?? Can't find it.
Sent from my SM-G925V using XDA Premium HD app
In the OP what is this zip file for '2. You have Flashfire installed so you can flash this zip file. Located here...?' Is it to be flashed before the hotspot zip?
knox
Does flashfire trip knox?
youngmack2k4 said:
Does flashfire trip knox?
Click to expand...
Click to collapse
... do bears have wings?
Sent from my SM-G925V using XDA Free mobile app
youngmack2k4 said:
Does flashfire trip knox?
Click to expand...
Click to collapse
Do pigs fly?
Sent from my SM-G925V using XDA Premium HD app
cubarican84 said:
In the OP what is this zip file for '2. You have Flashfire installed so you can flash this zip file. Located here...?' Is it to be flashed before the hotspot zip?
Click to expand...
Click to collapse
That's just the stock framework, you only need to flash the hotspot file. I think gun put it there to test if flash fire works on your device. Just a guess.
cubarican84 said:
In the OP what is this zip file for '2. You have Flashfire installed so you can flash this zip file. Located here...?' Is it to be flashed before the hotspot zip?
Click to expand...
Click to collapse
Becuase yu must have Flashfire installed first is all.
Can't flash mods with it.
Gunthermic said:
Becuase yu must have Flashfire installed first is all.
Can't flash mods with it.
Click to expand...
Click to collapse
Were you trying to create a link to flashfire? I think that might be the confusion as there are two links in OP that both direct to the stock framework.
First off credit goes to @_alexndr for the original file from this thread. All I did was edit the mount point in the updater script to work with our device. Flash the attached file with FlashFire to add init.d support to your VZW S6. If you have not rooted and installed FlashFire go to this thread to sign up and get the app. Thanks and enjoy.
View attachment 3325054
Misterxtc said:
First off credit goes to @_alexndr for the original file from this thread. All I did was edit the mount point in the updater script to work with our device. Flash the attached file with FlashFire to add init.d support to your VZW S6. If you have not rooted and installed FlashFire go to this thread to sign up and get the app. Thanks and enjoy.
View attachment 3306654
Click to expand...
Click to collapse
Will it only work for VZW? I have a Sprint S6
JoeFCaputo113 said:
Will it only work for VZW? I have a Sprint S6
Click to expand...
Click to collapse
It should but I'm not positive. Your mount point might be different. It will either work or not, shouldn't hurt anything if it fails.
http://forum.xda-developers.com/showthread.php?t=2698813&nocache=1 so does this work? whjy was OP edited?
Misterxtc said:
It should but I'm not positive. Your mount point might be different. It will either work or not, shouldn't hurt anything if it fails.
Click to expand...
Click to collapse
How can I tell you if my mount point is different?!
I flashed this, but I am unsure what scripts we can use for the S6
dobosininja said:
I flashed this, but I am unsure what scripts we can use for the S6
Click to expand...
Click to collapse
I mainly istalled this for the SuperSU script but you can use it for whatever initd script you want to try.
So I have an init.d script to try. What should I do?
grifforama said:
So I have an init.d script to try. What should I do?
Click to expand...
Click to collapse
Place it in your system/etc/init.d folder after you install init.d and see if it works. If it doesn't work your script is flawed.
FYI all you have to do to add init.d support is DL kernel auditor from the play store and enable.
JoeFCaputo113 said:
FYI all you have to do to add init.d support is DL kernel auditor from the play store and enable.
Click to expand...
Click to collapse
I just bake it in my ROM now.
According to the Killjoy init.d verification check, I don't have init.d support after I flashed this. Any deeper reason why that may be?
Sent from my SM-G920V using Tapatalk
---------- Post added at 02:08 PM ---------- Previous post was at 02:04 PM ----------
coffeehandle said:
According to the Killjoy init.d verification check, I don't have init.d support after I flashed this. Any deeper reason why that may be?
Sent from my SM-G920V using Tapatalk
Click to expand...
Click to collapse
EDIT: Well after activating a tweak in a terminal emulator it verified the init support. So disregard my question!
On another note everyone go check the Killjoy script! It has some neat stuff!
Sent from my SM-G920V using Tapatalk
Thread moved - https://forum.xda-developers.com/android/general/mod-experience-sound-t3681780
Images
It works great with the dual speaker mod
Do I need to uninstall v1.0 first or just flash v1.2 over v1.0? Thanks.
chiphu said:
Do I need to uninstall v1.0 first or just flash v1.2 over v1.0? Thanks.
Click to expand...
Click to collapse
You should be able to flash 1.2 over 1.0
Sent from my SM-G935U using XDA Labs
someone with exynos 935f tried this?
ReizaBT said:
someone with exynos 935f tried this?
Click to expand...
Click to collapse
Make sure there is a file called "audio_effects.conf" in your /system/etc. If so it should work
@Craz Basics
I have an update for this.
Set SE Permissive via init.d instead of an app
Updated V4A
Move V4A from data to system/priv-app
If there is no init.d support in the end-users rom, they can open up V4A, hit the menu, and disable selinux from there.
kevp75 said:
@Craz Basics
I have an update for this.
Set SE Permissive via init.d instead of an app
Updated V4A
Move V4A from data to system/priv-app
If there is no init.d support in the end-users rom, they can open up V4A, hit the menu, and disable selinux from there.
Click to expand...
Click to collapse
I knew there was a better way and now I know
billdauterive23 said:
I knew there was a better way and now I know
Click to expand...
Click to collapse
I don't think the SeLinux disabler is in the older versions on V4A
kevp75 said:
I don't think the SeLinux disabler is in the older versions on V4A
Click to expand...
Click to collapse
Ok, I have no idea I was just thinking
~~Updated to V2.0~~
~~Not Tested Yet~~
Updated V4A app to v2.5.0.5
Update... Again....
~~Updated to v2.1~~
~~Not Tested Yet~~
Couldn't seem to get init.d working, so I used su.d instead
•su.d support
•Permissive on boot(through su.d), no more apps (SELinux Mode Changer)
Cannot boot with it...not getting SUMMING logo phase
Sblast said:
Cannot boot with it...not getting SUMMING logo phase
Click to expand...
Click to collapse
What version did you flash and what is your model?
Decent UltraLite 3.0 (Android 7) and flashed both versions.
First, does not work.
Second won't pass boot screen to logo part.
Sblast said:
Decent UltraLite 3.0 (Android 7) and flashed both versions.
First, does not work.
Second won't pass boot screen to logo part.
Click to expand...
Click to collapse
It's for the US galaxy s7 and s7 edge.
v2.1 works on u firmware and it's better than previous versions. Thanks @Craz Basics
Sent from my SM-G935U using Tapatalk
chiphu said:
v2.1 works on u firmware and it's better than previous versions. Thanks @Craz Basics
Click to expand...
Click to collapse
Sweet, glad you like it!
Craz Basics said:
Sweet, glad you like it!
Click to expand...
Click to collapse
I still prefer the old, easier-to-use UI, though.
Sent from my SM-G935U using Tapatalk
chiphu said:
I still prefer the old, easier-to-use UI, though.
Click to expand...
Click to collapse
I agree. I'll make one with 2.3.4.0 as well.