hello everybody! i 've got this problem on my rzr hd with cm11. when i plug the hdmi on tv my phone turns to landscape and the tv got signal but with black screen, on stock firmware works fine. this happening someone? any solution?
tanks for yours answers.
sorry for my english
I have the same issue with HDMI and CM11
The HDMI code is proprietary code owned by Motorola. They have not released the source for it, so CM11 HDMI will not work. Any ROM that is AOSP-based will not work as they are compiled straight from the AOSP source which does not have the HDMI code. Again, the HDMI code is owned by Motorola and they have not and will not release the source since it's not open-source code.
I have an XT925 on cm11 (M5) and HDMI is working without any issues.
Have you actually tried HDMI recently on stock firmware? Perhaps is the actual port that got screwed (been there).
kernelmoron said:
I have an XT925 on cm11 (M5) and HDMI is working without any issues.
Have you actually tried HDMI recently on stock firmware? Perhaps is the actual port that got screwed (been there).
Click to expand...
Click to collapse
I remember testing the HDMI when I first flash CM11 and it was working, but now it doesn't work anymore... maybe it's an issue triggered in some point between M5 and M6 (I'm currently running M6)
I have an xt926 that runs on the Liquidsmooth ROM (AOSP-based, KitKat version) and have no problems with HDMI. It worked on the Jelly Bean version of Liquidsmooth as well.
pbosio said:
I remember testing the HDMI when I first flash CM11 and it was working, but now it doesn't work anymore... maybe it's an issue triggered in some point between M5 and M6 (I'm currently running M6)
Click to expand...
Click to collapse
I don't remember if It ever worked on cm base, but I'll try if it works on cm10.2
it now works on the latest cm11 with the 3.4 kernel so when that comes to official it will work for every one :laugh:
billycar11 said:
it now works on the latest cm11 with the 3.4 kernel so when that comes to official it will work for every one :laugh:
Click to expand...
Click to collapse
but for install cm11 with 3.4 kernel needs kitkat base y compatible recovery right?
frannq said:
but for install cm11 with 3.4 kernel needs kitkat base y compatible recovery right?
Click to expand...
Click to collapse
yes
billycar11 said:
yes
Click to expand...
Click to collapse
So, i have to wait to try
Related
hi Everyone
why is the htc Saga not getting any Cm official nightlies ? 9 or 10?
We got official ics( via ruu) and kernel sources?
mayurh said:
hi Everyone
why is the htc Saga not getting any Cm official nightlies ? 9 or 10?
We got official ics( via ruu) and kernel sources?
Click to expand...
Click to collapse
why don't you use other roms like jelly time and nk111's
sbsbsb123 said:
why don't you use other roms like jelly time and nk111's
Click to expand...
Click to collapse
tried pacman which is a combination
how stable are those roms? is everything working?
i seen a few issues
but anyways.still wondering why no official cm nightlies?
mayurh said:
tried pacman which is a combination
how stable are those roms? is everything working?
i seen a few issues
but anyways.still wondering why no official cm nightlies?
Click to expand...
Click to collapse
Because to have official support it has to be out of Alpha/Beta stage. In other words it has to be completely stable on hardware level (kernel and proprietary binaries) before it can be included in the main repo and build with only CM not device changes. CM devs will not bother to fix device stuff, only OS related. So if you are reading the CM10 threads you will know that we are far from that still. It may be working but not for all (example the hitachi panel users). Until this is fixed - no official support.
amidabuddha said:
Because to have official support it has to be out of Alpha/Beta stage. In other words it has to be completely stable on hardware level (kernel and proprietary binaries) before it can be included in the main repo and build with only CM not device changes. CM devs will not bother to fix device stuff, only OS related. So if you are reading the CM10 threads you will know that we are far from that still. It may be working but not for all (example the hitachi panel users). Until this is fixed - no official support.
Click to expand...
Click to collapse
thanks for the explanation dude
appreciate it. now i understand
i always thought the cm guys do the work them selves to get everythign working correctly.guess i was wrong
so our devs have to get it stable first.then they add it
Done a little digging and I am not sure.
Do any of the AOSP 4.2.1 ROM Currently support Audio out through USB? I am on an unofficial AOKP and it does not.
Really miss this feature.
Thanks
MoreGone said:
Done a little digging and I am not sure.
Do any of the AOSP 4.2.1 ROM Currently support Audio out through USB? I am on an unofficial AOKP and it does not.
Really miss this feature.
Thanks
Click to expand...
Click to collapse
Apparently you can get USB audio working on some AOSP roms with a patch written by jacknorris by following the procedure explained in this post.
Hi everyone!
I've got problem with my Moto G (xt1032), GPS doesn't work after flashing CM11. Any ideas?
KroQ said:
Hi everyone!
I've got problem with my Moto G (xt1032), GPS doesn't work after flashing CM11. Any ideas?
Click to expand...
Click to collapse
it's a very early release!! is in Alpha ,Beta, stage... let developer to fix all issues soon CM11 will be more Fast and Stable!
if you need GPS Function , use the stock Firmware or any Custom Rom stock based
japoina92 said:
it's a very early release!! is in Alpha ,Beta, stage... let developer to fix all issues soon CM11 will be more Fast and Stable!
if you need GPS Function , use the stock Firmware or any Custom Rom stock based
Click to expand...
Click to collapse
So it's normal for this unofficial release, and there is nothing to worry about?
Thanks!
KroQ said:
So it's normal for this unofficial release, and there is nothing to worry about?
Thanks!
Click to expand...
Click to collapse
is very soon for make working all the things in CM11 ( GPS ) and CM11 just now is not 100% for daily drive, i reccomend you one of the Customs ROM's. @dhacker29 is awesome dev and sure in next 2 months us will have a very stable CM11 in Moto G
---------- Post added at 01:46 PM ---------- Previous post was at 01:42 PM ----------
use any of these ROM's Nexus G -- KitKat+ 1.1 -- Infusion Beta II
install one of those customs rom by CWM i preffer CWM
KroQ said:
So it's normal for this unofficial release, and there is nothing to worry about?
Click to expand...
Click to collapse
It is normal to encounter any kind of bugs, even some serious ones. Alpha stage means that the ROM is in early stage of development, and while it is not dangerous for the device, it is far from a daily driver. If you encounter any kind of bugs, you should write them in the CM11 topic, in this way the info may never reach the developers.
Not sure if it'll help but I had same issue on my note 2. (I just flashed newest CM nightly build for it). Everything was working fine except the GPS.
I had read somewhere that restoring/installing a ROM (for me it was Note 2 Alliance ROM) that has a working GPS then installing CM11 over w/out wiping should fix the problem.
Hey guys, same problem here, I have installed the latest nightly (20140716).
Somebody know the fix/workaround?
Thanks in advance.
giustones said:
Hey guys, same problem here, I have installed the latest nightly (20140716).
Somebody know the fix/workaround?
Thanks in advance.
Click to expand...
Click to collapse
In cm11 m8fix gps also doesn't work, a fix would be nice.
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
i think you should try to download latest version and flash
and i think it is a nightly so you will have some isusse
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Joery360 said:
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Click to expand...
Click to collapse
yes i use.
I've experienced the first screen on my tab the first time I tried the Easter egg on SlimKat. Never had a problem since... does the Easter egg persist to do this?
Swyped from my P3110 running SlimKat from the XDA Premium HD app!
happened in all roms :\
Abade002 said:
Hello The ui system does not work properly. It happens to anyone else? I use cyanogenmod 11-201402221-NIGHTLY-p5510 and kernel 3.0.31-CM-g9b3f943.
Click to expand...
Click to collapse
It happened with all kitkat roms i have installed on my p5100 (omni , mokki, cm , sonic hd )
I think that tab 2 10.1 hardware is not good enough to run kitkat animation on this resolution or screen size
Note : it worked perfectly on my samsung s gti9000
No Logcat = No Problem
Joery360 said:
I'm not experiencing this issue, do you use the JB Bootloader?
Guide to install JB Bootloader
Click to expand...
Click to collapse
if i forgot to update the bootloader before install cyanogenmod, do i have install stock rom and initiate the process again or just to update above the cm 11?
Abade002 said:
if i forgot to update the bootloader before install cyanogenmod, do i have install stock rom and initiate the process again or just to update above the cm 11?
Click to expand...
Click to collapse
Nope, you should not need to install the stock ROM if the current ROM is stable enough for you to download the updated recovery. Once you have it downloaded, update the recovery. Then maybe do a complete wipe/factory reset from the recovery, then reinstall CM 11 (or any other) fresh.
Hi guys,
I hope there is a developer who can port a lollipop ROM on our tf700. Isn't there?
madiweb said:
Hi guys,
I hope there is a developer who can port a lollipop ROM on our tf700. Isn't there?
Click to expand...
Click to collapse
Please request this thread be moved from the android development section. Yes I am working on it but I havent had much progress.
WOO HOO!!!!!
Thanks for starting the work on this. Do you think the hardware will be able to support this version of Android? I really hope so, just because I am cheap and don't feel like shelling out the cash right now for a new tablet, that will be rooted and have a custom ROM installed before the weekend hits.
killwrath said:
Thanks for starting the work on this. Do you think the hardware will be able to support this version of Android? I really hope so, just because I am cheap and don't feel like shelling out the cash right now for a new tablet, that will be rooted and have a custom ROM installed before the weekend hits.
Click to expand...
Click to collapse
There is nothing wrong with the hardware. ROM is no problem @timduru works on one http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783 I'm shure it will go with tf700t also as I'm presently running his KatKiss for tf300t on my tf700t. But someone should fix a lollipop kernel.
das chaos said:
There is nothing wrong with the hardware. ROM is no problem @timduru works on one http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783 I'm shure it will go with tf700t also as I'm presently running his KatKiss for tf300t on my tf700t. But someone should fix a lollipop kernel.
Click to expand...
Click to collapse
Your saying TF300 Roms work perfectly on the TF700 aren't there any issues? Which kernel are you currently running?
Techpenguin5 said:
Your saying TF300 Roms work perfectly on the TF700 aren't there any issues? Which kernel are you currently running?
Click to expand...
Click to collapse
I'm not talking of ROMS but of KatKiss alone. Kernel is of course a tf700t kernel: Grimlock v 3.
I have also a tf201 with KattKiss running on it issueless.
I am quite a fan of @timduru.If he would compile a lollipop kernel for tf700t, I would love to try his lollipop version.
das chaos said:
I'm not talking of ROMS but of KatKiss alone. Kernel is of course a tf700t kernel: Grimlock v 3.
I have also a tf201 with KattKiss running on it issueless.
I am quite a fan of @timduru.If he would compile a lollipop kernel for tf700t, I would love to try his lollipop version.
Click to expand...
Click to collapse
Would you recommend flashing this TF300 Lollipop ROM on a TF700 with grimlock v4 kernel? Is it stable in your opinion?
Thanks,
Keshav
Just a quick update re Lollipop and Timduru... he's got one out in decent though still Alpha form running on the TF101. That is truly amazing. Have to talk my wife into letting me install it on her TF101. Hehehehe....
Since the Nexus 7 with the Tegra3 chip has a kernel and drivers to run Lollipop, wouldn't this mean Asus and Nvidia have done the development needed to make the Tegra3 compatible with the OS? In theory if Asus wanted to they could release an official Lollipop rom for the TF700.
Being that the Nexus 7 is essentially using the same CPU, could the drivers and anything needed be stripped from that kernel and ported to one that works on our device? Or hell...just use the same kernel?
fsured said:
Being that the Nexus 7 is essentially using the same CPU, could the drivers and anything needed be stripped from that kernel and ported to one that works on our device? Or hell...just use the same kernel?
Click to expand...
Click to collapse
We were running KitKat on a JB kernel - do you have any reasons why L wouldn't work on that kernel? Probably more critical are the HAL drivers (in /system/lib/hw), but workarounds for potential compatibility problems will be found.
keshavmot2 said:
Would you recommend flashing this TF300 Lollipop ROM on a TF700 with grimlock v4 kernel? Is it stable in your opinion?
Thanks,
Keshav
Click to expand...
Click to collapse
Don't! Grimlock v 4.4 is a kitkat kernel. For lollipop ROM you need a lollipop kernel. And for tf700t you need a tf700t-lollipop-kernel. If someone compiles one I would try timdurus lollipop ROM.
_that said:
We were running KitKat on a JB kernel - do you have any reasons why L wouldn't work on that kernel? Probably more critical are the HAL drivers (in /system/lib/hw), but workarounds for potential compatibility problems will be found.
Click to expand...
Click to collapse
I don't know a thing about coding or I'd be having way more fun with my devices. But I figured new OS, different memory/process management, it would all require a kernel that is new. It was just a thought that if they did it for one Tegra3 device then it shouldn't be hard to bring over if Asus doesn't.
I'm really curious how Lollipop will run on the TF700T. I had a negligible performance boost from 4.2.1 to 4.4.4 and given that Lollipop is loaded with animations, I am a little worried... Kudos to the people trying to make it happen though! Can't wait to see it become reality and test it out! If you need someone to test out the roms, shoot me a message. I have plenty of free time and I might be getting a second tablet (Either a Nexus 9 or a Shield) so I'm not extremely worried about losing the TF700.
humanitybg said:
I'm really curious how Lollipop will run on the TF700T. I had a negligible performance boost from 4.2.1 to 4.4.4 and given that Lollipop is loaded with animations, I am a little worried... Kudos to the people trying to make it happen though! Can't wait to see it become reality and test it out! If you need someone to test out the roms, shoot me a message. I have plenty of free time and I might be getting a second tablet (Either a Nexus 9 or a Shield) so I'm not extremely worried about losing the TF700.
Click to expand...
Click to collapse
timduru's Lollipop ROM is in stable release now, and I flashed it to my 300 yesterday. I believe it is faster than his KitKat version, and that's quite an achievement. The ART runtime is purported to work well with machines that are not overly-endowed with specs, and so far my experience supports that.
I, too, am looking forward to a KatKiss-LP ROM on my 700 also. So far I have seen no reports of a successful, well, port. Someone tried to use Grimlock v4-tf700 and so far has failed.
Any news about CM12 ?
ZOMBi-X-Lollipop (ZOMBi-POP) beta nearly ready for public release.
.... and it's smooooooooth!